Products Matches:
185ASIC and IC Design : IC Physical Design Tools
Product Name:
CoDeSys SP
Company: 3S - Smart Software Solutions GmbH
In order to make a device programmable with CoDeSys, the corresponding software, the CoDeSys SP runtime system, must be implemented on the device. This runtime system turns any embedded or PC based device into an IEC 61131-3 controller programmable with CoDeSys.Product Name:
CompactPCI data acquisition, processing and recording system - 2GSPS
Company: 4DSP
The PP128 is a high performance data acquisition and processing
platform dedicated to digital recording applications. The PP128
CompactPCI based card comprises two 2GSPS A/D channels as well as four
Virtex-4 FPGAs. Real-time recording can be easily achieved by
connecting the FPDP or fibre channel to a disk array (200Mbytes/s
sustained). Communication with a host computer via the PCI bus enables
users to control the system, modify algorithm settings on-the-fly and
extract data for further analysis.
Product Name:
AS-101 Mobile Digital TV Receiver System-On-Chip
Company: Abilis Systems
The AS-101 is a highly integrated RF System-on-Chip (RFSoC) for Mobile Digital TV (MDTV) reception. It provides a complete flexible, multi standard, multi band, solution from the antenna to the MPEG transport stream data and the IP datacasting services. Product Name:
PXIS-2700
Company: ADLINK TECHNOLOGY INC.
The PXIS-2700 is a high-capacity PXI chassis that provides one system and 17 peripheral slots in a standard 19” 4U dimension and supports both PXI and CompactPCI modules. Compliant with PXI specification Rev. 2.2, the PXIS-2700 features a 10 MHz reference clock, start trigger, local bus, and a trigger bus divided into three segments by two PCI bridges.Product Name:
Automation Software
Company: Advantech Co., Ltd.
Software plays a vital role in developing automated data acquisition and control systems. The software you use in these systems spans a broad range of functionality, from device drivers for controlling specific hardware interfaces to application software packages for developing systems.Product Name:
PC/104 Data Acquisition & Control Modules
Company: Advantech Co., Ltd.
Advantech PC/104 industrial communication boards, featured with Ethernet, RS-232 or RS-422/485 ports, are designed for communication applications that require good reliability and ease-of-use. These boards can be applied into embedded multiport applications.
Product Name:
Pre-configured System
Company: Advantech Co., Ltd.
Expertly configured for general applications, this new products line features Advantech's most popular CPU boards, chassis, backplanes and peripheral components and save your time on system assembly and integration at the best price-performance ratio.Product Name:
"Flexible Platform" T2000
Company: Advantest Technology Solutions Corp.
Innovation never stops. And, with SoC devices demonstrating increasingly shorter life spans, chipmakers now have a cost effective alternative to purchasing new ATE platforms every 2-3 years, or with each new generation of device.
The T2000 enables you quick access to high-volume markets with minimum investment.
T2000 - "Innovative Solutions for Changing Needs"Product Name:
GlobeViewer
Company: AnaGlobe Technology, Inc.
GlobeViewer is more than just another layout viewer. It provides many value-added features, in addition to the rich set of viewing/measure functions, for industry standard GDS (for IC layout), MEBES pattern and job (for IC photo mask) formats.Product Name:
Video Amps/Buffers/Filters
Company: Analog Devices
If your design requires an amplifier that is simply used as a buffer at a Gain of 1 or 2, ADI has the right solution for you. These easy to use amplifiers are specifically optimized for a particular gain, therefore minimizing your design time.Product Name:
AnSem's Proprietary Synthesis Tool and Design Automation
Company: AnSem NV
Our advanced design flow covers the complete design cycle from high-level design to layout and back-annotation. State-of-the-art electronic design automation (EDA) software tools, combined with the AnSem Advanced Proprietary Synthesis Tool (APST) are integrated into the design flow and development of all our analog circuits to allow design re-use and technology portability.Product Name:
Full-Wave SPICE
Company: Ansoft Corp.
Full-Wave SPICE enables frequency-dependent SPICE models to be
generated in HSPICE, PSpice or Spectre RF formats for accurate time
domain simulation in other third party time domain analysis tools. It
provides high-bandwidth SPICE models at
the touch of a button.Product Name:
HFSS
Company: Ansoft Corp.
HFSS™ is the industry-standard simulation tool for 3D full-wave electromagnetic field simulation. HFSS provides E- and H-fields, currents, S-parameters and near and far radiated field results. Intrinsic to the success of HFSS as an engineering design tool is its automated solution process where users are only required to specify geometry, material properties and the desired output.
Product Name:
FPSLIC (AVR with FPGA)
Company: Atmel Corporation
Atmel's AT94K and AT94S family of Field Programmable System Level Integrated Circuits (FPSLIC devices) combine all the basic system building blocks (logic, memory and uC) in an SRAM-based monolithic field programmable device. The FPSLIC programmable SLI platform allows true system level designs to be implemented without the need for expensive NRE (non-recurring engineering) charges or costly software tools.Product Name:
AIEC / ARM966E-S™
Company: Automotive Integrated Electronics Corporation
The AIEC / ARM966E-S™ Microprocessor Core (AIEC9) is a high-performance, low-cost 32-bit microprocessor core that is intended as a platform for custom automotive System on Chip (SoC) developments. The high-performance of the AIEC9 is in part due to the memory architecture, which has been optimized for real time control systems where deterministic performance is achieved through execution of instructions directly from flash. An interleaved flash controller allows zero wait state execution of sequential code even with comparatively slow flash.
Product Name:
J1850VM
Company: Automotive Integrated Electronics Corporation
The J1850VM fully supports the SAE Recommended Standard J1850 Class B Data Communication Network Interface for both single byte and consolidated headers using Variable Pulse Width (VPW) modulated bit encoding.
The J1850VM automatically handles the protocol details including message buffering, arbitration, frame delimiters, error detection, and cyclical redundancy generation and checking. Product Name:
PowerCentric™
Company: Azuro, Inc.
PowerCentric™ is a clock tree synthesis (CTS) and post-CTS optimization tool that reduces clock power by up to 40%, reduces insertion delays by up to 20%, and accelerates time to market for designs with complex clocks. PowerCentric fits seamlessly into a design flow after physical optimization and before routing, using industry standard file formats as its inputs and outputs. The product has been used on many tapeouts from 180nm to 40nm and is part of TSMC's official reference flow.
Product Name:
Rubix™
Company: Azuro, Inc.
Rubix™ is a clock concurrent optimization tool that increases chip speed by up to 20% and dramatically accelerates chip time to market. Clock concurrent optimization (CC-Opt) is a revolutionary new approach to timing optimization which merges physical optimization with CTS and bases all optimization decisions on a true propagated clocks model of timing. Using CC-Opt clocks are not balanced, but are built directly to deliver the best possible timing picture post-CTS in the design flow.
Product Name:
Beckhoff Bus Terminal
Company: Beckhoff Automation GmbH
The I/O signals are wired in a decentralised way to fieldbus devices or centrally to the controller. The available manufacturer-specific fieldbus devices with fixed input/output configurations and design often make it necessary to use an entire group of devices with similar functions. This costly method of signal acquisition gives rise to high material, installation, planning and documentation costs as well as high costs for subsequent modification or expansion.Product Name:
Beckhoff Fieldbus Box
Company: Beckhoff Automation GmbH
The Beckhoff Fieldbus Box system is the culmination of the fieldbus concept: Robust construction allows fieldbus modules to be fitted directly to machines. Control cabinets and terminal boxes are now no longer required.Product Name:
Beckhoff TwinCAT
Company: Beckhoff Automation GmbH
PLC and Motion Control on the PC. The Windows Control and Automation Technology. The Beckhoff TwinCAT software system turns any compatible PC into a real-time controller with a multi-PLC system, NC axis control, programming environment and operating station. TwinCAT replaces conventional PLC and NC/CNC controllers as well as operating devices.
Product Name:
LithoTuner™
Company: Brion Technologies
Full chip analysis ensures that every critical structure is addressed
in the matching optimization. Matching is no longer constrained to
simple 1D through-pitch or limited pattern sets. Matching now finds and
optimizes all sensitive patterns through the full process window. For
the first time, matching optimization can cover the full chip over the
entire process window, and with the exact variances of the actual
scanners in the fab.Product Name:
Tachyon™ FEM
Company: Brion Technologies
Tachyon Focus-Exposure Modeling (FEM) empowers the user to create a single
lithography process model that accurately simulates focus-exposure
lithography variations in the ever-shrinking process window of today's
subwavelength regime.Product Name:
LNB2065-05/W
Company: BroadGalaxy Electronics
BG-LNB2065-05/N have
been designed to meet the more restrictive specifications for Ka Band
communication systems. The equipment has a typical gain of 55 dB with a
Noise Figure less than 2.5 dB with low weight and dimensions. BG-LNB2065-05/N
have been tested and calibrated between -40ºC and +55ºC, so they assure
very good gain stability with temperature. The more common applications
for this systems are Broadband Internet access or similar.Product Name:
ICARuS
Company: CAD Science, Inc.
This is programmable Tcl and edge based full featured DRC tool with high programmability. It supports 90nm and 65nm rules and it even includes layout modifications which other tools don't provide.Product Name:
Cadence Chip Optimizer
Company: Cadence Design Systems, Inc.
Conventional IC implementation tools create oversimplified models of
interconnect. Cadence® Chip Optimizer is a silicon-proven, full-chip
physical design optimization system that improves manufacturability,
yield, and performance. It optimizes layout based on electrical
constraints, manufacturing rules, and timing objectives.
Product Name:
Virtuoso Layout Migrate
Company: Cadence Design Systems, Inc.
Cadence® Virtuoso® Layout Migrate is the physical layout migration tool
within the Cadence Virtuoso custom design environment. It supports fast
process and design rule migration of hard IP, custom digital designs,
mixed-signal blocks, memories, and standard cell libraries.
Product Name:
Virtuoso NeoCircuit Circuit Sizing & Optimization
Company: Cadence Design Systems, Inc.
Cadence® Virtuoso® NeoCircuit performs automatic circuit sizing and optimization for custom digital, RF, and mixed-signal circuits. Integrated with the Virtuoso custom design platform, Virtuoso NeoCircuit leverages the Virtuoso Schematic Editor and employs the designer’s simulator of choice to size, bias, and verify circuits interactively with a manual starting point or automatically without any starting point. Product Name:
Virtuoso® Chip Assembly Router
Company: Cadence Design Systems, Inc.
Cadence® Virtuoso® Chip Assembly Router is the custom block and chip
authoring routing tool of the Virtuoso platform. As a constraint- and
design rule-driven interactive and fully automatic shape-based router,
it supports block authoring and chip authoring solutions for custom
digital, mixed-signal, and analog designs at any level of the
hierarchy—transistor, cell, block, and chip, as well as advanced chip
interconnect.Product Name:
Virtuoso® Chip Editor
Company: Cadence Design Systems, Inc.
Cadence® Virtuoso® Chip Editor is the centerpiece of the Virtuoso custom design platform’s full-chip integration component. It provides high-performance editing for full-chip finishing tasks and can handle even your largest designs. Virtuoso Chip Editor is fully interoperable with the Cadence Encounter® digital IC design platform and it leverages the industry-standard Virtuoso Layout Editor environment and infrastructure for layout productivity when you need it most—at tapeout.Product Name:
Virtuoso® Schematic Editor
Company: Cadence Design Systems, Inc.
Cadence® Virtuoso® Schematic Editor provides numerous capabilities to
facilitate fast and easy design entry, including design assistants that
speed common tasks by as much as 5x. Well-defined component libraries
allow faster design at both the gate and transistor levels.
Sophisticated wire routing capabilities further assist in connecting
devices.Product Name:
Centellax TG1B1-A 10G BERT
Company: Centellax
The Centellax TG1B1-A 10G BERT is a cost-effective 0.5 to 12.5Gbps Pseudo-Random Bit Sequence generator and Bit Error Rate Tester designed for automated production-line testing, manufacturing and R&D lab use.Product Name:
Lossless Data Compression
Company: Comtech AHA Corp.
Reducing data size and transmission time are the key benefits of AHA's
line of lossless data compression integrated circuits and boards. For
20 years, AHA's application-specific compression algorithm devices have
been improving performance in data storage, copiers, printers, scanners
and other imaging equipment.Product Name:
CST MICROWAVE STUDIO®
Company: CST - Computer Simulation Technology
CST MICROWAVE STUDIO® (CST MWS) is the leading edge tool for the fast and accurate simulation of high frequency (HF) devices such as antennas, filters, couplers, planar and multi-layer structures and SI and EMC effects. Product Name:
Boards and Kits
Company: Cswitch Corporation
The CS90 Development and Validation Board (DVB) provides a complete
platform for designing and verifying various networking applications in
the CS90 family of devices. This board also allows designers to
implement high-speed SERDES and external memory interfaces with the
CS90 family of devices.Product Name:
Hybrid IC
Company: Cubic Wafer
Hybrid integrated circuits are devices that apply standard semiconductor processing technology to individual ICs, and fuses the ICs together to simultaneously form an electrical, mechanical, and thermal bond. By applying semiconductor processing techniques to the packaging world, hybrid ICs realize the advantages of semiconductor processing. Advantages, such as extremely small and high density interconnects, lower cost, lower power, and scalability are all realized with Cubic Wafer’s patented hybridization process.Product Name:
SCADA Encryptors
Company: D Crypt Private Limited
D’Crypt’s SCADA Encryptor is a protocol transparent RS232 Serial Link
Encryptor. It is used to secure the communication links in a SCADA
network. The SCADA Encryptor integrates the d’Cryptor ZE that
has been certified to FIPS 140-2 Level 3 (Certificate No. 637). The
encryptor is designed to operate in harsh environment and can support a
range of different RTU protocols.Product Name:
Smart Card Adaptor (SCA)
Company: D Crypt Private Limited
D’Crypt’s Smart Card Adapter is a card-neutral OEM reader module that operates with various types of contactless smart cards. The Smart Card Adapter comprises a cryptographic core certified to FIPS 140-2 Level 3 (Certificate No. 637) and integrates interfaces to contactless A, B, and C cards. The adapter can be integrated with LCD and casing as a payment or loyalty terminal, or be integrated into ATMs or vending machines. With all keys stored in the cryptographic core, additional security devices like SAMs are no longer necessary.
Product Name:
HiDFT-Scan
Company: DeFacTo Technologies
HiDFT-Scan is the unique EDA tool that allows scan logic to be fully implemented at RTL. According to the intended scan implementation methodology, HiDFT-Scan can be used
-
to replace traditional gate-level scan by RTL scan
-
to back-annotate at RTL physically reordered scan chains
HiDFT-Scan can generate RTL code with scan, which enables new pre-synthesis design and DFT verifications.Product Name:
Blueprint
Company: Denali Software, Inc.
Blueprint is used by chip design teams to automate the creation and management of control registers, and all related models, design views and documentation. From a register description language (RDL) input, Blueprint generates views for hardware and software development, verification, and documentation. Supported output formats include Verilog, C, C++, OpenVera, e, OVL, Frame, HTML/XML, Word and moreProduct Name:
DW 2000
Company: Design Workshop, Inc.
dw-2000™ addresses the design requirements of physical layout and verification of analog and mixed-signal integrated circuits. Although available as separate modules, dw-2000 is an integrated environment consisting of a full-featured Layout Editor, a comprehensive Design Rule Checker, a reliable LVS and a Data Conversion Module. All these modules share a common powerful Programming Environment allowing almost unlimited extendibility.Product Name:
Phar Lap TNT DOS Extender
Company: Dini Group
A DOS Extender is a software tool that enables developers to access extended memory beyond the 640K DOS limit. The DOS extender functions as a layer between DOS in real mode and an application in protected mode. It is embedded into the program and is invisible to the end-user. Phar Lap's DOS extenders support all the major industry standards-DPMI, XMS and VCPI-so that Extended-DOS applications can run under DESQview™ and all modes of Windows™, as well as DOS.Product Name:
4-Bit MCU for LCD Product
Company: Elan Microelectronics Corp.
EM73361A is an advanced single chip CMOS 4-bit micro-controller. It contains 3K-byte ROM, 52-nibble RAM, 4-bit ALU, 13-level subroutine nesting, 22-stage time base, two 12-bit timer/counters for the kernel function. EM73361A also contains 3 interrupt sources, 1 input port, 4 bidirection I/O ports, built-in watch-dog-timer counter, tone generator and LCD driver (27x3 to 13x3).Product Name:
8-Bit MCU for LCD Product
Company: Elan Microelectronics Corp.
The EM78860 is an 8-bit RISC type microprocessor with low power , high speed CMOS technology .Integrated onto a single chip are on-chip watchdog (WDT) , RAM , ROM , programmable real time clock / counter , internal interrupt, power down mode , LCD driver and tri-state I/O . The EM78860 provides a single chip solution to design a message display .Product Name:
eKK8301 Keyboard Controller
Company: Elan Microelectronics Corp.
The eKK8301 microcontroller is dedicated to a keyboard encoder, specially designed for IBM PC AT and all compatible machines. The eKK8301 control all scan codes, three LEDs status, scan timing and communications between the keyboard and PC. It is easy to implement a high performance, low cost keyboard with the minimal external components.Product Name:
Graphic Colour STN LCD Drivers with Built-in RAM
Company: Elan Microelectronics Corp.
EM65568 is one of the industry’s most advanced wide-screen STN-LCD drivers for 4096-color display. The industry’s first sub-screen display function makes it possible to display different images and data in a sub-screen inside the main LCD screen. It also has a built-in display RAM, a power supply circuit for LCD drive, and an LCD controller circuit, therefore contributing to compact system design. Its partial display function realizes low power consumption.Product Name:
Pillar-DP®-Navis
Company: Entasys Design, Inc.
There is a rich
set of tools available today to support chip
design at the register-transfer level. After
years of research and development, most of
all SoC designers have fairly good understanding
on design process based on the RTL of representation.
Product Name:
Pillar-DP®-SoC
Company: Entasys Design, Inc.
Today's SoC designers
must handle the challenges on finding the
optimum size of their chip while design size
increases and complexity grows. As a result,
how to take this into account became a critical
challenge in early stage design considerations.
Additionally SoC designers need a early estimation
model that can assure the delivery of the
highest quality of silicon along with power
and signal-integrity aware analysis and the
low power design and yield capabilities, which
are most critical for advanced 65nm and 45nm
designs. Product Name:
Pillar-DP®-Ventus
Company: Entasys Design, Inc.
At the early stage of SoC design, there
are many unknowns and SoC designers have many
options available, so this is why making the
right choices can be difficult. As behavioral
description is not just sufficient to describe
the constraints of today's complex SoC design,
the innovative methodology is needed to specify
and analyze a higher-level of the design representation
in early design stage and answer questions
about floorplanning, power consumption, area
and timing.Product Name:
Mixed Signal Integration
Company: Essensium NV
Essensium is a specialist SoC integrator covering analog and RF integration, we pay special attention to a careful integration of both digital with analog and RF functions on the same silicon die.Product Name:
Crossfire
Company: Fenix Design Automation
Crossfire checks the various views and formats that are created for standard-cell libraries in an IC design-flow. Ensuring basic consistency -ranging from pin-names to conditional delay paths for all applicable views - to more sophisticated checks such as pin-routability ensure that each revision of a specific cell-library can be used successfully to generate that winning designProduct Name:
Interview
Company: Fenix Design Automation
As part of the Crossfire environment, Interview is a multi-database/multi-format browser & viewer. Interview allows users to open and inspect all databases and formats supported by Crossfire, without a need for starting third-party tools. In Interview, a single window may contain OA, LEF, Milky Way and GDS views next to each other.Product Name:
FishTail
Company: FishTail Design Automation, Inc.
IC design is not getting any easier. With increased gate counts, higher clock speeds, smaller chip sizes and reduced power requirements, designers have a very difficult task. Today's virtual prototyping and chip-implementation tools are powerful and address several key deep-sub micron issues, but there remains a fundamental conundrum.Product Name:
802.15.4 Platforms ICs
Company: Freescale Semiconductor Inc.
Freescale has raised the bar 802.15.4 platform IC by integrating the RF
transceiver and low power MCU into a single chip. The MC1321x family
integrates an 8-bit MCU with an IEEE® 802.15.4 compliant 2.4 GHz
transceiver into a single 9x9mm LGA package.
Product Name:
Gigabit SerDes Transceivers
Company: Freescale Semiconductor Inc.
A SerDes transceiver (Serializer/Deserializer) takes byte or word wide data, converts it into a serial data stream and then transmits it over a differential media from point A to point B. This significantly reduces the number of signal paths and offers duplex data rates in the tens of gigabaud data rate.
Product Name:
MPC8610: Integrated Host Processor
Company: Freescale Semiconductor Inc.
The MPC8610 processor is engineered to deliver breakthrough
performance, connectivity and integration for embedded applications that process
or display graphical images, such as kiosks, robotics, in-vehicle infotainment,
cockpit displays, single-board computers and multi-function printers and scanners. Product Name:
Power Management and User Interface ICs
Company: Freescale Semiconductor Inc.
Our highly integrated Power Management & User Interface (PMUI) ICs provide coordinated power sequencing, low consumption standby modes, and seamless power switching. The higher integration levels enabled by Freescale's SMARTMOS™ technology bring extended functional content to include a host of convenience features and user interface capabilities.Product Name:
HT Cave (GHT-Cave)
Company: GDA Technologies, Inc
HyperTransport technology is a highspeed, low-latency, point-to-point link for interconnecting integrated circuits (ICs) on a board. It is a packet-based link implemented on two independent unidirectional sets of wiresProduct Name:
Interpolation Circuit GC-AIP40
Company: GEMAC mbH
The Interpolation IC GC-AIP40 is suitable for increasing the resolution of incremental position and angular measuring systems with sine shaped output signals. The IC can be used with the standard voltage signals as well as current signals. Furthermore photo diode arrays and sensor bridges can be connected directly.Product Name:
Interpolation Circuit GC-IP200
Company: GEMAC mbH
The GC-IP200 interpolation IC has been designed
for connection to incremental position and angular
measurement systems with sine-shaped output
signals with a 90° phase shift. It can be operated
at a large number of transducer systems working
according to the most varied measuring principles.
With a maximum interpolation rate of 200
the IC is capable to slit the input signal period into
up to 200 segments. An internal counter provides
a counting value which can be output via a serial
or a parallel interface. Furthermore there is the possibility to output the data as a pair of square
waves for processing externally.Product Name:
CASCON POLARIS™
Company: GÖPEL electronic GmbH
CASCON POLARIS™,
member of the product family SYSTEM CASCON™, is a powerful and
flexible, yet user friendly integrated development and execution
workbench for JTAG/Boundary Scan In-System Programming (ISP)
applications, proven in the industry for more than 13 years.Product Name:
FAT
Company: HCC-Embedded
FAT is a high-performance, full-featured, FAT12/16/32-based,
DOS-compatible file system designed for embedded applications that
require the attachment of PC-compatible media, such as flash card
memory devices.Product Name:
TINY
Company: HCC-Embedded
TINY is designed for the easy integration and configuration of new chip types. HCC gives free consultancy for adding new device types or modifying existing ones. Also available is hardware reference design informationProduct Name:
uCDrive
Company: HCC-Embedded
uCDrive is designed to allow Micros to appear as Pen Drives on a PC through a simple serial port connection. Used with our file systems (EFFS-TINY and EFFS-THIN) it gives a new dimension to product development and management with microcontrollers.Product Name:
VeloceWired
Company: Helic, Inc.
Bondwires are a popular and low-cost assembly option for a wide range of IC packages. In high-speed IC design, bondwires introduce parasitics such as inductance and magnetic coupling which may affect product performance significantly. To meet demanding requirements, IC designers now have the ability to draw, model and optimize bondwires as parts of their circuits.
Product Name:
In-circuit Emulation
Company: Hitex Development Tools
The in-circuit emulator offers an excellent price-performance ratio and
makes you start easier your design project. Together with our HiTOP
user interface and the modularity and upgrade paths of our MX and AX
series to the ASIC technology of our highly modular DProbe systems,
you'll have everything.Product Name:
IC Manage Appliances
Company: IC Manage, Inc.
IC Manage manufactures a line of Perforce Appliances that have been optimized and tuned to provide maximum performance for the Perforce software. The Perforce server is built into these appliances and will deliver top performance and reliability. IC Manage Appliances utilize an optimized installation of SuSE LINUX running the XFS file system. IC Manage Appliances typically deliver at least four times the performance of similar hardware configurations because of this tuning and optimization.Product Name:
IC Manage GDP - Global Design Platform
Company: IC Manage, Inc.
IC Manage GDP (Global Design Platform) is a next generation design management system that efficiently manages, locates, and assembles components and delivers reuse across the enterprise. Its transaction-based architecture and streaming network implementation provide scalability, reliability and performance up to 100 times that of conventional data management systems based on 1980’s RCS technology.Product Name:
IC Manage Industrial Strength Design
Company: IC Manage, Inc.
With increasing chip sizes, distributed design teams, and the incorporation of third party elements, organizations
are fi nding that their chip design environments are now more complex than ever. The ability to effectively assemble
and manage the different design components can help an organization achieve higher productivity and faster time
to market.
IC Manage is a next generation design management system that delivers the performance necessary to handle
today’s complex chip designs. It easily manages, tracks, and confi gures an entire enterprise’s design data during all
phases of the design process. With its database architecture and streaming network implementation, IC Manage is
up to 100 times faster than conventional systemProduct Name:
Indy R1000 Reader Chip
Company: Impinj Inc.
The highly integrated Indy reader chip and supporting software deliver
the building blocks for a full range of UHF Gen 2 RFID readers, from
short-range embedded modules to long-range dock door readers.Product Name:
MonzaTM and MonacoTM Tag Chips
Company: Impinj Inc.
Impinj's Monza and Monaco UHF Gen 2 RFID tag chips support global
tagging needs. Their unique dual input design enables a full range of
antenna form factors that satisfy applications at short range (near
field), long range (far field), and everywhere between. Product Name:
ESD Diode for TSMC .13u LV or G Process
Company: Impulse Semiconductor Inc
The Impulse TSMC .13u ESD diode was made to provide ESD discharge paths when integrating third party IP in an integrated circuit design for total ESD protection. The Impulse ESD diode has been successfully used with Dolphin Technologies, Artisan/ARM, TriCN/Synopsis I/O libraries, as well as popular IP blocks from RAMBUS, Chip Idea and other quality IP vendors. A 5.5 volt reverse bias anode to cathode operational specification enables the Impulse TSMC .13u ESD diode to be the device of choice for 5 volt tolerant designs.Product Name:
Impulse Semiconductor
Company: Impulse Semiconductor Inc
The Impulse Semiconductor High Current Transmission Line Pulse (TLP) test system is the tool of choice for extracting ESD parameters for transient protection devices in a package, or at wafer level. With accuracy better than 100 milliohms at 40 amps peak current, the Impulse high current TLP is
specially tailored to the needs of today’s ESD device designers who must accurately measure low values dynamic resistance irrespective of breakdown voltage.Product Name:
Transmission Line Discharge Networks
Company: Impulse Semiconductor Inc
The Impulse transmission line pulser (TLP) discharge networks are easily
integrated with other instruments for a custom system matched for your device
and process applications. Specifications include 1-10 nanosecond rise times,
up to 40 amps peak, for 10-500 nanosecond pulse widths. It is a proven design
incorporating 15 years of hardware and device development experience.
Reliable performance over hundreds of processes, and thousands of products.
All TLP systems are built by special request, contact us with your specifications
or application.Product Name:
IC-e6-VMEa
Company: INTERFACE CONCEPT
VME64x SBC based on a MPC7448 processor (3900DMIPS @ 1.7GHz) equipped with Marvell Discovery III chipset that provides Three Gigabit Ethernet ports .VME64x 2eSST interface - one USB2 controller, GPIO on P0, two PMC slots...Product Name:
IC-PQ2-PMCb
Company: INTERFACE CONCEPT
IC-PQ2-PMCb PMC is an high integrated module with single board computer functionalities. This rugged PMC
board is intended for embedded application with specifi c needs of conduction-cooled systems. This card has been
designed in accordance with ANSI Vita 20 and IEEE1386.1 PCI mezzanine card standard.Product Name:
IC-PQ2-PMCc
Company: INTERFACE CONCEPT
IC-PQ2-PMCc PMC module is designed in accordance with IEEE1386 standard. It features a high performance 32 bits PowerPC processor with three Fast Ethernet controllers. A local co-processor takes in charge all communication
functionalities unloa-ding thus the PowerPC processor.Product Name:
IC-PQ2-VMEa
Company: INTERFACE CONCEPT
IC-PQ2-VMEa is powered by a MPC8270 (0,13μm process technology), being part of the PowerQUICCII processor family. This embedded processor couples a 603e core with a RISC communication processor and three Fast Ethernet controllers. The MPC8270 implements a full PowerPC core with integer unit, FPU, MMU, fully compliant with the PowerPC family.Product Name:
IC-PQ3-VMEa
Company: INTERFACE CONCEPT
IC-PQ3-VMEa is powered by a MPC8555E or a MPC8560, being part of the PowerQUICCIII processor family. This e500 core is a 2-way super-scalar and 7-stage pipeline design with out-of-order issue and execution.Product Name:
iNAV® 31K AdvancedTCA® Carrier Card
Company: Interphase Corp
The iNAV® 31K-G2 AdvancedMC Carrier Card is a flexible, high-performance addition to next-generation systems. It meets the needs of a wide variety of applications in ATCA 3.1 systems, including I/O, processing, and storage. The iNAV 31K-G2 features include a high-performance Ethernet switch with 24 gigabit ports and up to two 10 gigabit ports, an optional PCI Express switch, advanced Telecom Clock management, and a Linux®-based Board Management Processor that provides full local and remote management.Product Name:
iSPAN® 3639 AdvancedMC™ Multiprotocol T1/E1/J1
Company: Interphase Corp
The iSPAN 3639 AdvancedMC™ T1/E1/J1 communications controller delivers a comprehensive high-capacity connectivity solution for use with AdvancedTCA and MicroTCA platforms to deliver a wide range of Voice-Over-IP, Wireless and IP Multi-Media Subsystem (IMS) network elements.
Product Name:
iSPAN® 4538 PMC Multiprotocol T1/E1/J1
Company: Interphase Corp
The growth of the Internet has significantly spurred the growth of data over the PSTN and has resulted in the need to dramatically rearchitect the traditional telephone network. One solution is a converged switching architecture that couples packet switching technology with SS7 intelligence, allowing service providers to utilize conventional Internet access equipment as a cost-effective means of provisioning enhanced Internet services.Product Name:
iSPAN® 5539F PCI Multiprotocol T1/E1/J1
Company: Interphase Corp
As a new generation of telecom applications emerges, the need for distributed intelligence in communications I/O modules increases. The Interphase iSPAN 5539F T1/E1/J1 Communications Controller sets a new standard for performance and functionality as the industry's most advanced T1/E1/J1 controller for PCI-based telecommunications solutions. The intelligent 5539F provides a far superior I/O protocol processing capability than the passive legacy T1/E1/J1 card alternatives on the market today.Product Name:
TrueFit
Company: Javelin Design Automation, Inc.
TrueFit is a silicon-aware chip estimation solution tailored for use by business managers, system chip architects, and project leaders for quick and accurate analysis and estimation of die area, power, cost and I/O utilization at the aggregated level.Product Name:
TruePlan
Company: Javelin Design Automation, Inc.
TruePlan is tailored for system architects, project leaders and RTL engineers. Instead of waiting until complete and clean RTL/netlists are available, users can now explore and optimize trade-offs in chip architecture, bus topologies, inter-block dataflow, RTL micro-architecture, design structure and/or partitioning with partial or “dirty” RTL/ netlists, in parallel to others developing their respective portions of the chip.Product Name:
TruePro
Company: Javelin Design Automation, Inc.
TruePro is tailored for physically-aware chip architects, RTL designers, timing leads, and chip integrators to validate that the chip-plans and blocks are physically close-able. This is accomplished by enabling progressive prototyping of the chip-plan and/or blocks-in-chip context as block netlists become available.Product Name:
PCI Express
Company: LeCroy Corporation
LeCroy Summit T2-16 Protocol Analyzer
The LeCroy Summit T2-16 is our most full-featured protocol analyzer for PCI Express, and the first product on the market to support PCI Express Spec 2.0 ("Gen2") including 100% data capture on data rates up to 5 Gb/s.
Product Name:
WavePro 7000A
Company: LeCroy Corporation
The WavePro 7000A Series oscilloscope offers the sophisticated analysis capability of a top line
oscilloscope with the all-round utility of a general purpose instrument. In 1 GHz to 3 GHz
bandwidth applications, the WavePro delivers fast, accurate measurements associated more
often with high-end lab oscilloscopes.Product Name:
CellOpt™
Company: Library Technologies, Inc.
CellOpt is a dynamic circuit level power/timing optimizer designed to minimize the power dissipation of standard build blocks like logic gates and sequential elements, with optional timing constraints, by properly sizing the devices used in the circuit. After all, energy is consumed by these components, and how well they are designed and how well they fit to their particular use on the chip is of paramount importance. Product Name:
PeakView EMD
Company: Lorentz Solution
PeakView EMD is the perfect platform for automating all of your passive device EM design and modeling needs. PeakView delivers “on-the-fly” full 3D EM Synthesis of advanced on-chip passive structures to designers using the Cadence custom IC design environment. PeakView EMD generates DRC/LVS correct physical layout , EM S-parameter models, broadband passive subcircuit models, and manages all necessary Cadence design views (schematic, symbol, simulation,…) for each device. Product Name:
PeakView HFD
Company: Lorentz Solution
PeakView HFD provides the designer the easiest way to extend their EM design practice to include an “early-and-often’ use of EM Integrity Verification. Designers understand components developed and modeled in isolation and later placed in a design, behave “differently “ due to various EM integrity (coupling) effects. Product Name:
Optimization Cock pit
Company: Manhattan Routing, Inc.
Cockpit tool suite is targeted at bridging the gap between the physical and logical designers during the timing closure phase of the IC design process. During this time the detailed design functionality knowledge of the front-end team, and the detailed physical design knowledge of the back-end team are merged in the timing sensitized physical database of Physical WindowProduct Name:
LAYTOOLS
Company: MATRICuS Inc.
LAYTOOLS is a custom integrated circuit design suite optimized for complex analog, digital, and mixed-signal IC design. The suite includes applications for schematic capture, physical layout, database verification, automated place and route, plotting, and data conversion toolsProduct Name:
SPE
Company: MATRICuS Inc.
SPE (Schematic Probe Environment) is a flexible and powerful full-function multi-level schematic capture environment developed particularly to enable IC circuit design engineers to enter schematics accurately, clearly and quickly. In addition it provides the ability to cross-probe between schematic and layout views using the network extracted.
Product Name:
MTI04
Company: MAZeT GmbH
The MTI04CS/CQ, MAZeT now presents the
second-generation multi-channel transimpedance amplifier. The
MTI04CS/CQ now offers the ability to adapt the compensation of the
transimpedance amplifier) to the input capacitance of the sensors, such
as photodiodes. This is done digitally in two stages, 5 and 80pF.
Product Name:
DPC DataPath Compiler
Company: Micro Magic, Inc.
DPC is the tool used by designers needing high performance chips. They want the performance of full custom design, but with a much shorter design cycle. Datapaths designed with DPC are 3X (three times) faster and 40% smaller than synthesis and place and route. At the same time, it takes 10X (ten times) less effort than full custom designProduct Name:
MAX and MAX-LS
Company: Micro Magic, Inc.
MAX is much more than a layout tool; it is an intelligent IC layout environment. MAX includes interactive cross-probing between layout and schematic. Automatic generation of layout from schematics (a feature of MAX-LS) provides true schematic-driven layout. And, with real-time interactive DRC, MAX shows you any DRC errors right on the layout! No memorizing design rules or counting grids.Product Name:
SUE Design Manager
Company: Micro Magic, Inc.
SUE is not just another schematic capture tool. SUE is a quantum leap in technology that gives the designer the ability to enter, visualize, and control large, complex chip designs. It is a complete design environment in which to capture all levels and types of design informationProduct Name:
nanoRVInteractive™
Company: Micrologic Design Automation, Inc.
nanoRVInteractive™ is a nanometer range EDA tool that interactively eliminates reliability issues during the construction of integrated circuit’s physical design. The tool automatically checks for all reliability phenomenons including but not limited to electromigration, self heat and voltage drop (IR Drop) during the construction of IC layout, creating a Reliability-Aware mask design environment. Product Name:
MyChip StationTM Pro
Company: MyCAD, Inc.
MyChip StationTM Pro is a sophisticated physical design system, which can turn a Windows based personal computer into a powerful engineering workstation.
Product Name:
linear ICs
Company: NEC Electronics, Inc.
NEC Electronics supplies general-purpose linear ICs designed to meet the various needs of customers, such as power-supply ICs, a category where the company has introduced low-voltage products from an early stage, and operational amplifier-comparators that have been used for many years in many fields such as industrial products and electrical equipment. Product Name:
µPD720102 USB 2.0 Host Controller
Company: NEC Electronics, Inc.
NEC Electronics' new USB Controller series which aim to be adaptive
"Ecological Solutions" focusing on becoming "easy to use" for design
enagineers and end-users, by reducing power consumption, and shrinking
size of board design by integrating some external electronic components
in a small package of the controller.Product Name:
coolCAM™
Company: Novelics
Content-Addressable-Memory (CAM) is a great way to make short work of large searches. Simply present the required data to a CAM macro, and it will return the address or even perform a linked table lookup in a single cycle. Unfortunately, the power consumption of a traditional CAM architecture is so large that power distribution and heat dissipation become serious issues for large implementations.Product Name:
coolOTP™
Company: Novelics
Novelics patent pending coolOTP technology is based on standard CMOS processing with no additional doping or masking layers. In addition to substantial cost savings, our customers will experience industry leading density, power and speed performance.Product Name:
coolREG™
Company: Novelics
Novelics’ compiler-based family of advanced embedded memories includes low-power, high-speed, and high-density configurable register files targeting the most demanding SoC, ASIC, and ASSP applications.Product Name:
coolROM™
Company: Novelics
Using proprietary, breakthrough technology, coolROM provides our customers with single metal layer programming in standard CMOS processing while achieving the lowest density/power performance in the industry.Product Name:
coolSRAM-1T™
Company: Novelics
Based on Novelics' breakthrough technology, our double density coolSRAM-1T provides unmatched, industry leading density and low power using standard CMOS processing. coolSRAM-1T is available through MemQuest™, our memory generator and optimizer, on a standalone basis or combined with other memory modules.Product Name:
coolSRAM-6T™
Company: Novelics
Novelics coolSRAM-6T embedded memory is ideal for applications requiring high speed at the lowest possible power consumption. Through Novelics' breakthrough proprietary technology, lower leakage current of up to 10X have been achieved.Product Name:
coolSRAM-8T™
Company: Novelics
Novelics’ coolSRAM-8T embedded memory IP is an ideal solution for ASIC,
ASSP and System-on-Chip (SoC) applications with stringent power, speed
or area requirements.Product Name:
OptEM Package
Company: OptEM Engineering, Inc.
OptEM Package is a post-layout verification tool for the extraction, electromagnetic analysis, and modeling of advanced IC package interconnects. The software reads DXF or GDSII design files, and combines this layout data with physical process information to generate optimized SPICE models for any number of package traces in the designProduct Name:
CE-ATA HOST CORE
Company: Palmchip Corp.
CE-ATA is a standard for storage devices that is targeted for the
embedded market. The low pin count and small form factor make it an
ideal solution for the handheld applications area. The existing MMC
specification is used as the electrical interface for CE-ATA.Product Name:
DDR-SDRAM, FLASH
Company: Palmchip Corp.
The DDR/DDR2 memory controller is composed of a single-ported memory
controller core with an additional layer for multi-port applications
through a CoreFrame-II CrosSwitchProduct Name:
Dual/Quad Multiband Transceivers with FPGA - 3U/6U cPCI
Company: Pentek Inc.
Models 7241 and 7341 are cPCI multiband transceivers. They consist of one Model 7141 transceiver mounted on a cPCI carrier. The Model 7241 is a 6U cPCI board, while the Model 7341 is a 3U cPCI board. Model 7241D is the same as the Model 7241, except it contains two 7141’s rather than one.
Product Name:
Model 7141 Dual Multiband Transceiver with FPGA - PMC/XMC
Company: Pentek Inc.
Model 7141 is a software radio transceiver suitable for connection to HF or IF ports of a communications system. It includes two A/D and two D/A converters capable of bandwidths to 50 MHz and above. The 7141 uses the popular PMC format and supports the emerging VITA 42 XMC standard with optional switched fabric interfaces.
Product Name:
Model 7142 Multichannel Transceiver with Virtex-4 FPGAs - PMC/XMC
Company: Pentek Inc.
Model 7142 is a multichannel, high-speed data converter suitable for connection to HF or IF ports of a communications system. It includes four A/Ds and one upconverter and D/A converter capable of bandwidths to 50 MHz and above. The Model 7142 uses the popular PMC format and supports the emerging VITA 42 XMC standard for switched fabric interfaces.
Product Name:
DDR3 & DDR2/3 Combo PHY
Company: Prism Circuits Inc.
The DDR2/3 Combo PHY is silicon-proven drop-in PHY to accelerate ASIC/SoC development. The PHY offers flexibility to add custom features and support specific floorplan, power and testing requirements. The PHY is a complete solution requiring no additional IP components. However for custom needs, individual components such as IO library, GPIO, analog DLL are available.Product Name:
Unity
Company: Pulsic Limited
High performance shape based auto-interactive IC physical design solution for analog, custom, digital, mixed-signal, embedded DRAM/SRAM and system-on-chip (SoC) design - incorporating solutions for ECO placement, routing, timing closure, signal integrity and power routing.Product Name:
Pyxis NexusRoute
Company: Pyxis Technology, Inc.
Pyxis NexusRoute is a next generation
auto-router architected to address existing and emerging challenges for
physical design of nanometer technology integrated circuits. Its underlying
architecture enables the simultaneous optimization of design and manufacturing
closure resulting in up to 4X reduction in design closure with yield
improvements of up to 10%. Product Name:
Rabbit RIO
Company: Rabbit Semiconductor
The RIO (Rabbit I/O) is a versatile programmable I/O chip, featuring I/O expansion and specialty features compatible with any processor that has an available clocked serial port. Since the RIO is part of the Rabbit® family of devices, Dynamic C® library and sample programs are available to quickly integrate the RIO into Rabbit® systems.
Product Name:
AE-3 Series
Company: Renesas Technology Corp.
The AE-3 Series are single chip microcomputer (MCUs) built around the
high-speed 16bit AE-3 CPU. EEPROM, ROM, RAM, 2 I/O Ports, Random Number
Generator (RNG) and Watchdog Timer (WDT) are included.
Product Name:
H8S Family
Company: Renesas Technology Corp.
The H8S family has an wide-ranging lineup of product series to meet the
demands of various customer applications. Diverse customer needs can be met with on-board interfaces for applications
such as LPC, BMC, ISA bus controller, I2C, USB, CAN, IE bus controller and LCD
controller. 3 V/5 V - I/F combination and high-speed low-voltage operations are
also supported.Product Name:
CANlink Bluetooth
Company: RM MICHAELIDES SOFTWARE & ELECTRONIC CORP.
CANlink® Bluetooth enables wireless data transfer between two different CAN networks (“CAN bridging”) or between a CAN network and a PC, laptop, or PDA via Bluetooth connection. Various devices with Bluetooth interfaces can exchange data with each other, provided they support the needed SPP (serial port profile), i.e. a virtual serial COM port. Linked devices can be mobile (e.g., vehicles or machines) or stationary (e.g., buildings, meters or systems).
Product Name:
Anaconda
Company: Sagantec
Anaconda is a schematic-driven, constraint-based compaction tool that accelerates analog physical design by automating repetitive manual layout tasks and enabling analog design reuse. From an easy-to-use and powerful graphical user interface, designers can add constraints in both schematic and layout views thereby annotating the design database with design intent. Product Name:
SiClone
Company: Sagantec
SiClone accelerates physical implementation and closure for full-custom design. It enables simultaneous, n-level hierarchical layout compaction, process migration and physical optimization.
Output File Formats: GDSII or CIFProduct Name:
Bantam
Company: Saratoga Data Systems
Bantam optimizes GDSII by reading a GDSII Stream file and outputting a GDSII Stream file that is functionally equivalent, yet smaller. Typically, Bantam reduces the size of GDSII Stream files by 50% to 98%. Bantam is used by some of the largest IC design firms in North America, Asia and Europe to speed their design flow and significantly reduce the time to market of new devices.Product Name:
TakeCharge® Design Kit (TDKx)
Company: Sarnoff Europe
The TakeCharge® Design Kit (TDKx) is a total ESD design
and layout solutions package, either off-the-shelf and
ready for selected foundry processes, or customdeveloped
for a proprietary process and/or a custom
application set. Upon delivery, the TakeCharge® Design
Kit is ready for company distribution to the I/O and IC
design and layout engineers.Product Name:
XtractIM
Company: SIGRITY, Inc.
XtractIM helps IC package design teams assess package electrical performance issues tens of times faster than the fastest competitor and reduce time to market. XtractIM extracts package models from S parameters computed by full-wave field solvers, fully taking into account various electromagnetic interactions.Product Name:
Laker DDL
Company: Silicon Canvas, Inc. (Aquired by SpringSoft)
Laker DDL (Design Driven Layout) is an advanced analog design flow that builds upon Laker's proven layout (L3) and SDL (ADP) products. The Laker DDL tool suite includes a constraint editor/extractor, custom placer, and custom router that will extract, preserve and honor constraints from design to layout. Tedious and time-consuming constraint preparation is a thing of the past! Laker DDL offers new levels of Laker controllable automation technology to provide the hand-crafted quality that designers need and the productivity that today's market demands!Product Name:
Laker L2
Company: Silicon Canvas, Inc. (Aquired by SpringSoft)
Laker-L2 is the technology leader in full custom layout. In addition to classical polygon editing features, it provides intelligent automation and intuitive guidance to make layout creation and editing tasks much more efficient. Laker's patented Magic Cells, built-in routers, rule-driven layout, and other controllable automation features provide the control and quality that custom layout designers need and deliver the productivity todays market demands. Laker L2 contains all of the same powerful features as our flagship Laker L3 except for schematic-driven layout (SDL) integration.Product Name:
Laker L3
Company: Silicon Canvas, Inc. (Aquired by SpringSoft)
Laker-L3 is the technology leader in full custom layout and offers a rule-driven and schematic-driven (SDL) layout flow. In addition to advanced polygon editing features, it provides intelligent automation and intuitive guidance to make layout creation and editing tasks much more efficient. Lakers unique Magic Cells, real-time DRC/LVS, drag-and-drop SDL, and other controllable automation features provide the control and quality that custom layout designers need and deliver the productivity todays market demands. Hundreds of customers worldwide have adopted Laker to tapeout thousands of designs down to 45nm.Product Name:
Laker T1
Company: Silicon Canvas, Inc. (Aquired by SpringSoft)
Laker T1 is the only commercially available platform dedicated to automated test vehicle development. It is used to design and automatically generate test vehicles from full-scale process development test chips to production scribe-line monitors in a fraction of the time of conventional tools. The parameterized architecture of Laker-T1 offers the ability to rapidly re-use, re-target and regenerate test vehicles and the associated documentation in different configurations and across multiple technologies or factories. Product Name:
SL6083 (Programmable LDD)
Company: SiliconCore Technology
The SL6083 is a triple 5 channel laser diode driver that provides
controlled currents to two grounded red laser diode and one floating
blue laser diode. The level of output current is determined by current input to
RSET, W1SET, W2SET, W3SET and W4SET. Each Channel gain is programmable
through serial interface.Product Name:
Expert Layout Editor
Company: Silvaco
Enables mask designers to achieve maximum density and performance in analog and digital layouts. Expert’s high-productivity design environment offers fast layout viewing, full editing features, large capacity, and powerful scripting for automation with parameterized cells (Pcells).
Operating Systems: Linux, Windows, SolarisProduct Name:
Gateway Schematic Editor
Company: Silvaco
The front-end of Silvaco's Analog/Mixed Signal/RF IC Design platform. It is tightly integrated with Silvaco’s circuit simulation, digital simulation, layout, DRC, ERC, LVS, and parasitic extraction tools. Advanced hierarchical editing features are available on Unix, Linux, and Windows.
Operating Systems: Linux, Windows, SolarisProduct Name:
Routing Engine
Company: SoftJin Technologies Private Limited
FPGA Routing Engine is a Timing driven Routing Engine for island based FPGA architectures. It is a fast, cross-platform Router that meets the timing goals, while optimizing the use of Routing Resources of the FPGA. It is a core EDA component that can be used by FPGA vendors to offer a customized, best-in-clasee Routing Engine as part of their tool suite to the FPGA users.
Product Name:
SonicsLX
Company: Sonics, Inc.
SonicsLX SMART Interconnect solution contains a high performance advanced fabric with data flow services for the development of complex SoCs. SonicsLX utilizes state-of-the-art physical structure design and advanced protocol management to deliver guaranteed high bandwidth together with fine grained power management.
Product Name:
SonicsMX
Company: Sonics, Inc.
The SonicsMX SMART Interconnect solution contains a high performance advanced fabric and a comprehensive set of data flow services for the development of multicore SoCs. By utilizing state-of-the-art physical structure design and advanced protocol management, SonicsMX delivers guaranteed high bandwidth together with leading edge, fine-grained power management. Quality of Service, access security, and error handling features comprise a robust turn-key solution that facilitates higher design predictability and decreases chip development time. Product Name:
SonicsStudio
Company: Sonics, Inc.
The SonicsStudio development environment accelerates every stage of System-On-Chip (SoC) design. From architectural exploration to synthesis, SonicsStudio provides an array of graphical and command line tools that provide SoC architects and designers a single environment within which the entire SoC can be assembled, configured, simulated, and final netlist generated.Product Name:
EDA 3D Analysis Suite
Company: Spatial Corporation
The EDA 3D Analysis Suite enables rapid development of 3D analysis and
integration with your application. The EDA 3D Analysis Suite provides
all the preprocessing and 3D Visualization necessary to link your 2D
application to your 2.5D and/or 3D proprietary solver capability. This
suite of EDA Tools
consists of a 3D modeler, a mesher subsystem that includes utilities to
implement adaptive meshing, and a graphics display that is integrated
and accessible through a unified API to streamline developer learning
curves and accelerate development time.Product Name:
Laker™ Custom Layout System
Company: SpringSoft, Inc.
The Laker™ Custom Layout System offers powerful
solutions for analog, mixed-signal, memory, and custom digital IC
design that address key pain points in the layout process. The Laker
layout system provides an intuitive methodology and controllable
automation that let you quickly achieve superior layout results. Product Name:
Smartcard ICs
Company: STMicroelectronics GmbH
STMicroelectronics offers a full range of Secure Integrated Circuits and Advanced Platforms for smartcard and digital security applications.
Product Name:
Matrix1
Company: TAEUS
Matrix1 is a software application that provides engineers images and
schematics of a competitor's IC in a user-friendly software application
that runs on any Windows-based computer.Engineers now have the power to explore a competitor's IC in ways that were previously unavailable.
Matrix1 shows engineers how competitors solve technical problems.
Matrix1 helps engineers find the weaknesses in competitor’s chips.
Matrix1 allows engineers to leap-frog the competition. Matrix1 empowers engineers to do their own investigations.
Product Name:
L-Edit
Company: Tanner EDA
Meets design needs by
combining the fastest rendering available with powerful features that exceed
the requirements of the most demanding user.
This leading analog / mixed signal IC layout tool enables engineers to
get started with minimal training.
Designers can draw and edit quickly, with fewer keystrokes and mouse
clicks than other layout tools. With
interactive Design Rule Checking (DRC), object snapping, and node highlighting,
as well as interoperability with other industry tools, engineers can work more
efficiently and productively.
Product Name:
TestDeveloper
Company: Test Systems Strategies, Inc. (TSSI)
TestDeveloper electronic design automation software efficiently analyzes timing from IC design simulation and generates high-quality, ATE-ready test files, reduces test time, and lowers costs for complex SoC devices.Product Name:
MSP430 Ultra-Low Power Microcontrollers
Company: Texas Instruments Inc.
The MSP430 microprocessor platform of ultra-low-power 16-bit RISC
mixed-signal processors from TI provides the ultimate solution for a
wide range of low power and portable applications. TI provides robust
design support for the MSP430 Microprocessor including technical
documents, training, tools, and software.Product Name:
Tsi252
Company: Tundra Semiconductor Corporation
The Tundra Tsi252™ is a secondary side power controller. It provides a
large degree of control and monitoring capability for power supplies
found in numerous communication, server, or storage systems. It greatly
simplifies the design of a power system for systems that require
multiple power supplies.Product Name:
Tsi340
Company: Tundra Semiconductor Corporation
The Tundra Tsi340™ is an industry-standard 32-bit, 66-MHz synchronous
PCI-to-PCI bridge available in a RoHS compliant, 128-pin PQFP
package. The Tsi340 is a high-quality, small form-factor, low-power
device backed by Tundra’s world-class service and support. The device
can be used on existing board footprints using 128-pin PQFP PCI-to-PCI
bridges as a competitively pricedProduct Name:
Tsi568A™
Company: Tundra Semiconductor Corporation
The Tsi568A™ is Tundra’s second-generation RapidIO switch. Supporting 80 Gb/s aggregate bandwidth, the Tsi568 enables customers to develop high-performance systems at low cost.Product Name:
Tsi578™
Company: Tundra Semiconductor Corporation
The Tsi578™ is
Tundra’s third-generation RapidIO switch. Supporting 80 Gb/s
aggregate bandwidth, the Tsi578 enables customers to develop
high-performance systems at low cost.
Product Name:
Badger Platform®
Company: Tuscany Design Automation, Inc.
A high-performance platform for developing customized design tools. Nearly all functionality is exposed to extension languages: perl, tcl, and python. Its breath and depth of capabilities make it attractive for many types of EDA applications for designers and CAD engineers that need a fast and powerful way to implement tools. Badger makes it easier than ever before to build custom applications that are robust, reliable, deployable, and integrateable. Badger brings commercial support to engineers implementing proprietary design algorithms-a foundation that meets highest capacity and performance requirements, as well as delivering built-in readers / writers for industry standard file formats.
Product Name:
Tego™, the structured design accelerator
Company: Tuscany Design Automation, Inc.
A high productivity alternative to full-custom design, Tego provides rich and extensive visualization and rapid "what-if" analysis, including incremental timing and power calculations. Tego accelerates existing physical design flows for CPU/DSP cores and other critical blocks that are candidates for a structured design methodology. Engineers using Tego discover a path to deterministic design closure, and deliver intelligent and reusable physical structures that are durable across products, and portable across libraries.
Product Name:
Tuscany Dashboard™
Company: Tuscany Design Automation, Inc.
The first web-enabled solution for the collaboration and visualization of IC design data, bridging front-end and back-end teams, Tuscany Dashboard aggregates all closure data into a single location and then produces comprehensive and readable web page visualization. By providing distributed development and access to consistent data views and history, engineers and managers can quickly understand the status of designs and come to closure on challenging requirements, even when engineers are working from multiple geographic sites, with multiple chips in progress, and with complex design constraints.
Product Name:
AVOLayout
Company: Unique ICs
AVOLayout is a layout editor, provides designers with graphic environment for layout design of analog and mixed signal ICs. It has user-friendly interface and full set of capabilities and features for creating and editing IC layout.Product Name:
AVOSpice
Company: Unique ICs
AVOSpice is one of the programs of CAD system AVOCAD. It is a fast and accurate analog simulation module for to use in the design of VLSI (Very Large Scale Integration) circuits that combines the advantages of SPICE and fast-SPICE programs. AVOSpice applies specific data structures and mathematical methods, that provides for the improved efficiency in the time it takes to simulate without a loss in accuracy. It works both under Windows and UNIX.Product Name:
GTcheck®
Company: XYALIS
GTcheck is a versatile tool, checking the integrity of GDSII/OASIS/MEBES databases, extracting
information like the list of layers, the design hierarchy, the top cell name,
the B-Box, ...Product Name:
GTframe®
Company: XYALIS
GTframe is a fully automated frame generator, optimizing the number of
chips on the reticle, creating bar code, inserting test structures, alignment
marks based on the users constraints.Product Name:
GTlayer®
Company: XYALIS
GTlayer permits the layers translation within GDSII/OASIS/MEBES
databases.Product Name:
GTmerge®
Company: XYALIS
GTmerge is an efficient tool to manipulate and merge large
GDSII/OASIS/MEBES databases. GTmerge optionally performs renaming of all cells
and warrants cell unicity in the resulting databaseProduct Name:
GTmuch®
Company: XYALIS
GTmuch is today the leading solution for Multi Project Wafers assembly.
This tool allows the assembly of more than 100 chips in two hours, thanks to an
automatic placement algorithm, saving time and silicon space. It generates a jobdeck or a
final GDSII/OASIS file with their complete PDF documentation and XML file.Product Name:
GTpick-cell®
Company: XYALIS
GTpick-cell and GTreplace® allows the extraction and
replacement of a cell from a
GDSII/OASIS database. The Typical application: change the ROM Code of a circuit at the latest
moment.
Product Name:
GTreplace®
Company: XYALIS
GTpick-cell and GTreplace® allows the extraction and
replacement of a cell from a
GDSII/OASIS database. The Typical application: change the ROM Code of a circuit at the latest
moment.Product Name:
GTsmooth®
Company: XYALIS
GTsmooth is a high-performance metal-filling tool, performing dummy tile
insertion at chip level. GTsmooth uses a pure model-based algorithm to identify
low-density areas where dummies are needed to achieve maximum factory yield
improvement. Product Name:
GTstyle®
Company: XYALIS
GTstyle is our latest metal filling tool, ideal for designs from 65nm
and below. GTstyle contains advanced algorithms to DFM problems such as crosstalk,
avoid too many floating caps, ... GTstyle does not use a model based approach.Product Name:
GTviewer®
Company: XYALIS
Very efficient GDSII/OASIS/MEBES viewer. It includes many fancy features
satisfying the needs of any ASIC designers.Product Name:
Z8 Encore
Company: Zilog, Inc.
Zilog’s Z8 Encore! Family of 8-bit Flash microcontrollers provides the ultimate in design efficiency, cost effectiveness and low power for a wide variety of embedded applications. Based on a 20MHz register-based eZ8TM core with memory to memory architecture and offering up to 12KB of Flash memory, an optional fast ADC, and up to a 20MHz IPO, the Z8 Encore.
Product Name:
ZNEO
Company: Zilog, Inc.
The Zilog Z16F 16-bit CISC microcontroller handily outperformance RISC
microcontrollers in its class. The Z16F boasts a unique architecture
that provides the power, punch, and performance of a 32-bit MCU, with
the code, current efficiency, and cost of a 16-bit MCU. The Z16F ZNEO®
MCU boasts a highly optimized instruction set that achieves more work
done per clock cycle, with less code space and lower overhead than
competing architectures.Product Name:
IrDA SIR Transceiver with RC high power option
Company: ZMD America, Inc.
The U2720-XS142x IC series is compliant to Infrared Data Association (IrDA) Physical Layer Standard IrPHY1.4. This IC transceiver can be combined into a module using an IrDA infrared photodiode (IrPD) for the receiver and an IrDA infrared LED (IrLED) for the transmitter.
|
|
