INTERFACE CONCEPT


Since 1987, Interface Concept is a leading European designer, developer and manufacturer of electronic embedded solution targeted to Defence, Aeronautics, Transportation and Telecommunication industries. As a world-wide expert for embedded critical networks applications, IC has been designing innovative COTS solutions based on state-of-the-art technologies for over 20 years.




Product Name: ComEth3200b
Product Category: MCM Layout Tools - PCB Design Tools

ComEth 3200b is a range of highly integrated Layer 2/3 Ethernet switches. The switching capability provides up to sixteen 10/100BT and eight 10/100/1000BT front Ethernet ports.

Product Name: ComEth3300b
Product Category: MCM Layout Tools - PCB Design Tools

ComEth3300b is a highly integrated Layer 2+ Ethernet switch providing 24 10/100TX Ethernet ports and 6 Gigabits ports. This product, built on a single height 6U board, runs in a VME chassis that only provides 5VDC power supply.

Product Name: ComEth5100b
Product Category: MCM Layout Tools - PCB Design Tools

ComEth 5100b is a range of highly integrated Layer 2+ Ethernet switches that provides twenty four 10/100TX Ethernet ports and six Gigabits ports. All these capabilities are implemented on a single slot 6U board.

Product Name: IC-e6-cPCIa
Product Category: Embedded Processor Development

SBC based on MPC7447A/MPC7448 processor (3200DMIPS @ 1,4GHz) equipped with Marvell Discovery III chipset that provides two Gigabit Ethernet ports routed on the J2 connector..  SDRAM-DDR up to 512MB, Flash up to 64MB, one USB2 controller, 4 GPIO on J2, one PMC slot...

Product Name: IC-e6-cPCIb
Product Category: Embedded Processor Development

IC-e6-cPCIb is a CompactPCI processor board based on the Freescale e600 processors MPC7447A or MPC7448. It is designed to provide the highest level of performance and integration available today.

Product Name: IC-e6-PMCa
Product Category: Embedded Processor Development

PrPMC module based on MPC7447A/MPC7448 processor (2.1MIPS @ 1GHz) equipped with Marvell Discovery III chipset that provides three Gigabit Ethernet ports.

Product Name: IC-PMC-cPCIa
Product Category: PCB Design and Analysis - PCB Design Tools

IC-PMC-cPCIa is a 3U compact PCI carrier for PCI Mezzanine Cards. One PMC card, compliant with IEEE1386, can be plugged onto this carrier. It integrates a 32-bit PCI bus capable of 33 or 66MHz frequencies.

Product Name: IC-PMC-VMEa
Product Category: PCB Design and Analysis - PCB Design Tools

The VMEbus interface of the IC-PMC-VMEa is based on a combination of the Tundra Tsi148 VME bridge and the latest generation of Texas Instrument VMEbus transceivers. This design allows the switching speed required by the 2eSST protocol on all the backplane slots.

Product Name: IC-PQ2-PMCb
Product Category: IC Physical Design Tools - ASIC and IC Design

IC-PQ2-PMCb PMC is an high integrated module with single board computer functionalities. This rugged PMC board is intended for embedded application with specifi c needs of conduction-cooled systems. This card has been designed in accordance with ANSI Vita 20 and IEEE1386.1 PCI mezzanine card standard.

Product Name: IC-PQ2-PMCc
Product Category: IC Physical Design Tools - ASIC and IC Design

IC-PQ2-PMCc PMC module is designed in accordance with IEEE1386 standard. It features a high performance 32 bits PowerPC processor with three Fast Ethernet controllers. A local co-processor takes in charge all communication
functionalities unloa-ding thus the PowerPC processor.

Product Name: IC-PQ2-VMEa
Product Category: IC Physical Design Tools - ASIC and IC Design

IC-PQ2-VMEa is powered by a MPC8270 (0,13μm process technology), being part of the PowerQUICCII processor family. This embedded processor couples a 603e core with a RISC communication processor and three Fast Ethernet controllers. The MPC8270 implements a full PowerPC core with integer unit, FPU, MMU, fully compliant with the PowerPC family.

Product Name: IC-PQ3-PMCb
Product Category: Embedded Processor Development

IC-PQ3-PMCb is powered by a MPC8541E or a MPC8555E, being part of the PowerQUICC™III processor family. This e500 core is a 2-way super-scalar and 7-stage pipeline design with out-of-order issue and execution. The core implements three integer units : two simple (1-cycle Ops) and one complex for integer multiply, divide.

Product Name: IC-PQ3-VMEa
Product Category: IC Physical Design Tools - ASIC and IC Design

IC-PQ3-VMEa is powered by a MPC8555E or a MPC8560, being part of the PowerQUICCIII processor family. This e500 core is a 2-way super-scalar and 7-stage pipeline design with out-of-order issue and execution.

Product Name: IC-SER-PCId
Product Category: Design Verification

IC-SER-PCId is powered by a MPC8270, being part of the PowerQUICCII processor family. This embedded processor couples a 603e core with a RISC communication processor and three Fast Ethernet controllers.

Product Name: pLinesE-VMEb
Product Category: ASIC Physical Synthesis - ASIC and IC Design

pLinesE-VMEb is powered by a MPC8270, being part of the PowerQUICCII processor family. This embedded processor couples a 603e core with a RISC communication processor and three Fast Ethernet controllers.


Z.I. N° 2 DES PAYS BAS
BRIEC DE L'ODET 29510
France
Phone: +330-2-98-57-30-30
Fax: +330-2-98-57-30-30
Contact us
Url: http://www.interfaceconcept.com/


Aldec

Downstream : Solutuions for Post processing PCB Designs

Featured Video
Jobs
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
Methodics User Group Meeting at Maxim Integrated 160 Rio Robles San Jose CA - Jun 5 - 6, 2018
2018 FLEX Korea at Room 402/ 403, COEX Seoul Korea (South) - Jun 20 - 21, 2018
IEEE 5G World FOrum at 5101 Great America Parkway Santa Clara CA - Jul 9 - 11, 2018
SEMICON West 2018 at Moscone Center San Francisco CA - Jul 10 - 12, 2018
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers
TrueCircuits: UltraPLL
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise