JMicron Technology Corp.


JMicron Technology Corporation is a professional fabless IC company. JMicron Technology Corporation provide the ultimate in pioneering IC technology — dedicated to the high speed and serial interface technology enabling next-generation interface and storage products. Our vision is to become a leading company of high speed IC solution.




Product Name: JMB355
Product Category: Analog and Mixed Signal - Design Suites

The JMB355 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device. The highly integrated USB 2.0, 1394A/B and SATA Phys technology provides a cost-effective solution to apply SATA to SATA device or USB to SATA device or 1394 to SATA device enclosure. The USB adheres to the Mass Storage Class Bulk-Only Transport Specification. The embedded command parser supports both ATA and ATAPI command set with LBA48 bit addressing capability. The 1394 adheres to SBP-2 specification. And SBP-2 acceleration hardware is embedded to off-load CPU and easy firmware control.

Product Name: JMB575
Product Category: ASIC Physical Synthesis - ASIC and IC Design

JMicron JMB575 is a single chip. It integrated six independent SATA channels and a micro-processor. With proper setting, the chip can be configured as 1 to 5- ports Serial ATA III Port Multiplier or a 5 to 1-port Serial ATA III Port Selector.

Product Name: JMF606
Product Category: Design for Test - ASIC and IC Design

JMF606 is a single chip, supports SATA III to NAND flash interface. It is native design to provide higher bandwidth for flash memory access.

JMF606 can support the maximum read and write speed to drive the limit of flash memory. JMF606 has the best supporting to the latest NAND flash memory, including Toshiba 19nm and Micron 20nm Flash. It also provides the embedded hardware error correction code (ECC), wear leveling, and bad block management technology in this chip. In order to resolve compatibility issue, JMF606 provides the on line firmware upgrade ability.

Product Name: JMF667
Product Category: Memory Upgrade - Memory

JMF667 is a single chip, supports external DDR3 DRAM, SATA III to NAND flash interface. It is native design to provide higher bandwidth for flash memory access.

JMF667 can support the maximum read and write speed to drive the limit of flash memory. JMF667 has the best supporting to the latest NAND flash memory, including Toshiba 32nm/24nm HBL/ABL, 19nm Flash, Intel/Micron 20 nm and 25 nm. It also provides the embedded hardware error correction code (ECC), wear leveling, and bad block management technology in this chip. In order to resolve compatibility issue, JMF667 provides the on line firmware upgrade ability.


1F, No.13, Innovation Road 1
Hsinchu Science Park
Hsinchu R.O.C
Taiwan
Phone: 886-3-5797389
Fax: 886-3-5799566
Contact us
Url: http://www.jmicron.com/Index.html
Aldec

Featured Video
Jobs
Principle Electronic Design Engr for Cypress Semiconductor at San Jose, California
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Director, Business Development for Kongsberg Geospatial at remote from home, Any State in the USA
Upcoming Events
IPC Technical Education - PCB Layout - Place and Route at Del Mar Fairgrounds 2260 Jimmy Durante Blvd. Del Mar CA - May 2, 2018
IPC Technical Education at Wisconsin Center 400 W Wisconsin Ave. Milwaukee WI - May 8, 2018
IPC High Reliability Forum at Embassy Suites: Baltimore-At BWI Airport 1300 Concourse Drive Linthicum MD - May 15 - 17, 2018
DownStream: Solutions for Post Processing PCB Designs
TrueCircuits: IoTPLL
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise