Products


Matches: 1742
System Level Design (ESL) : Algorithm Design/Exploration

Product Name: EZ-ASM Assembler
Company: Advanced Microcomputer Systems Inc

The EZ-ASM microprocessor/microcontroller assembler from AMS are macro cross assemblers that run on IBM PC and compatible machines and compile programs for specified target processors. The EZ-ASM comes with a built-in editor, reads your assembly language source file and creates a list file and an absolute Hexadecimal machine file in the binary, Intel or Motorola formats.

Product Name: Advantage Wireless Sensor Core
Company: Advantage Electronic Product Development, Inc

The Advantage Wireless Sensor Core TM is a slave companion platform to the Advantage Wireless Controller Core TM, a proven system designed specifically to jumpstart new products in development. Fixed remote sensing applications can provide convenience, efficiency, and safety. Wireless interfaces such as ZigBee
provide rapid, low-cost, and ultra low-power installation.

Product Name: cLGA® Land Grid Array Socket System
Company: Amphenol InterCon Systems, Inc.

The Amphenol InterCon cLGA® land grid array socket system brings conventional-connector-material construction to a high-performance, low-cost socket design. Gold-over-nickel plated beryllium copper spring contacts guarantee long-term connector performance, contact retention, and ruggedness in handling and use.

Product Name: InterCon50™and InterCon1mm™ Two-Piece Connector Systems
Company: Amphenol InterCon Systems, Inc.

The InterCon50™ and InterCon1mm™ two-piece connector systems include board connectors, cable assemblies, and flex assemblies. With the options of cable assembly and flex assembly products, the InterCon50 and InterCon1mm systems are the industry’s most complete two-piece systems. These high-density connectors and assemblies can be found in a wide range of applications including portable electronics, desktop computers, workstations, supercomputers, and medical electronic products.

Product Name: ICEView/ ICEEdit
Company: CAD Science, Inc.

It compresses/converts about 1G GDS data per minute (this is machine and data dependent, 4200RPM notebook hard drive will be much slower than 7200RPM normal desktop hard drive, SATA2 will be faster than IDE, etc). We even saw complete display of 1G GDS file in 48 seconds on some cheap RAID 0 system.

Product Name: CasePlayer2
Company: Gaio Technology, Inc.

'CasePlayer2' can be used to create software program specification documents. It analyzes the embedded C-language source code or assembler source code and generates the program specification documents like flow-chart or module structure chart. And it has the function to refer to the external variables and create the reference list which shows the source code lines referring or substituting to the external variable. This tool can be used to analyze the source code resources, which is developed in past times, when porting the source code resources to the new system.

Product Name: SystemVue ESL Design Software
Company: Keysight Technologies

SystemVue is a focused electronic design automation (EDA) environment for electronic system-level (ESL) design. It enables system architects and algorithm developers to innovate the physical layer (PHY) of wireless and aerospace/defense communications systems and provides unique value to RF, DSP, and FPGA/ASIC implementers. As a dedicated platform for ESL design and signal processing realization, SystemVue replaces general-purpose digital, analog, and math environments. SystemVue "speaks RF", cuts PHY development and verification time in half, and connects to your mainstream EDA flow. Key Benefits of SystemVue
  • Best-in-class RF fidelity among today’s baseband/PHY environments – allows baseband designers to virtualize the RF and eliminate excess margin
  • Superior integration with Test accelerates real-world maturity and streamlines your model-based design flow, from Architectures to Verification
  • Priced for networked workgroups to maximize design re-use and capitalize on Baseband & RF synergies

Product Name: LAYPAR
Company: MATRICuS Inc.

The LAYTOOLS Place and Route package may be used as a stand-alone tool or as an integrated component of the LAYTOOLS suite. Although initially targeted at medium-sized designs (100,000 gates) for mixed-signal application, it does integrate advanced algorithms which allow it to handle large numbers of cells and macros in an efficient manner without manual intervention

Product Name: iBurner I2C EEPROM Programmer Software
Company: Micro Computer Control Corporation

iBurner is our I2C Bus Serial EEPROM Programmer software package that provides a quick and easy way to blank-check, program, read, and verify a wide variety of I2C Bus EEPROMs. iBurner includes a device library with many popular I2C EEPROM devices, and supports adding your own additional devices.

Product Name: VisualSim SmartMachine
Company: Mirabilis Design Inc.

VisualSim SmartMachine is a custom block authoring language, for quick prototyping of software instructions, algorithms and resource processing.  The advantages are ease-of-learning, quick deployment, native code speed simulation performance, small code footprint and language flexibility.

Product Name: TestWave™
Company: National Instruments (Formerly AWR Corporation)

TestWave software integrates test and measurement (T&M) equipment with simulation software for communication systems and radio frequency (RF)/microwave circuits. Together with the Microwave Office® and Visual System Simulator™ (VSS) simulation software, TestWave provides wireless system and RF/microwave circuit designers a complete integration of the design process, combining schematic simulation, test signal generation, and test and measurement verification.

Product Name: PCAN-USB
Company: PEAK-System Technik GmbH

The PCAN-USB adapter enables simple connection to CAN networks. Its compact plastic casing makes it suitable for mobile applications. The opto-decoupled version guarantees galvanic isolation of up to 500 Volts between the PC and the CAN side.

Product Name: Keil ™ C166
Company: pls Programmierbare Logik & Systeme GmbH

The Keil ™ C166 compiler is designed for all derivatives of the XC16x / C16x / ST10 microcontroller families. All special features and peripherals of the controllers are accessible in C. ANSI-C is supported completely. The generated program code shows compact size and excellent performance.

Product Name: Tasking
Company: pls Programmierbare Logik & Systeme GmbH

The TASKING Classic C16x/ST10 toolset is also supported by Universal Debug Engine (UDE). All special features and peripherals of the controllers are accessible in C. ANSI-C is supported completely. The generated program code shows compact size and excellent performance.

Product Name: Filter Design Toolbox 4.6
Company: The MathWorks, Inc.

The Filter Design Toolbox™ product is a collection of tools that provide advanced techniques for designing, simulating, and analyzing digital filters. It extends Signal Processing Toolbox™ software (required, available separately) with filter architectures and design methods for complex real-time DSP applications, including adaptive and multirate filtering.

Product Name: Fixed-Point Toolbox 3.0
Company: The MathWorks, Inc.

Fixed-Point Toolbox™ software provides fixed-point data types and arithmetic in MATLAB®. You can use it to design fixed-point algorithms using MATLAB syntax and execute these algorithms at compiled C-code speed.

Product Name: MATLAB®
Company: The MathWorks, Inc.

MATLAB is a high-level language and interactive environment that enables
you to perform computationally intensive tasks faster than with traditional programming languages such as C, C++, and Fortran

Product Name: Signal Processing Toolbox
Company: The MathWorks, Inc.

The Signal Processing Toolbox is a collection of industry-standard algorithms for analog and digital signal processing. It provides graphical user interfaces for interactive design and analysis and command-line functions for advanced algorithm development

Product Name: Automotive
Company: Tilcon Software (acquired by Wind River)

Tilcon's unique architecture allows OEMs to offer a more competitive business model—OEMs can now rapidly fulfill the unique branding requirements of their customers at dramatically reduced costs.

Product Name: CANape 7.0
Company: Vector Cantech, Inc.

CANape offers you a multifaceted tool that is available for ECU development, calibration, and diagnostics as well as for measurementv data acquisition.

ASIC and IC Design : Analog & Mixed Signal Simulators

Product Name: Analog ND-6013
Company: ADLINK TECHNOLOGY INC.

Features
  • Channels: 3
  • Input Type: Pt-100, Ni-100 or Ni-120 RTD
  • Isolation Voltage: 2500 VRMS

Product Name: SpiceCreator
Company: Advanced Microcomputer Systems Inc

SpiceCreator  is a popular 32-bit analog, digital, mixed signal circuit design and simulation program, sporting the same or more advanced features  at a fraction of the cost of other simulator

Product Name: LVDT Sensor Amplifiers
Company: Analog Devices

Analog Devices’ signal conditioning ICs, together with Linear Variable Differential Transformers (LVDTs), can be used to convert mechanical position to a dc voltage. The IC provides both the excitation for the LVDT as well as converting the output to dc level with a user selectable gain. ADI’s LVDT signal conditioners are available to interface with a wide range of LVDTs, including half bridge and standard 4- and 5-wire.

Product Name: RS-232
Company: Analog Devices

The RS-232 specification allows for reliable data transmission from one transmitter to one receiver at data rates of up to 20K bits/second over relatively short distances (up to 50 feet). On more recent RS-232 Transceiver chips, data rates of up to 1Mbps are achievable over shorter distances (up to 5 feet). The most common applications for RS-232 Transceivers are computers and peripherals, mobile phone data cables and diagnostic data ports. Analog Devices offers a wide range of RS-232 Transceivers to suit many applications

Product Name: ANSYS Icepak
Company: ANSYS, Inc.

ANSYS Icepak software provides robust and powerful computational fluid dynamics (CFD) for electronics thermal management. Based on the renowned ANSYS FLUENT solver, ANSYS Icepak combines advanced solver technology with robust meshing options designed to provide fast and accurate thermal results for electronics cooling applications.

Product Name: FFT
Company: Athena

Athena's remarkable patented arithmetic technology, complex signal processing algorithms such as the Athena FFT have been implemented with unprecedented efficiency.

Product Name: AS3415 Active Noise Cancellation
Company: austriamicrosystems AG

Integrated Active Noise Cancelling solution with integrated bypass function addressing feedforward architecture for Stereo wired headsets, suitable for music, video or mobile use.

Product Name: B2 Logic Version 3
Company: Beige Bag Software

B2 Logic allows you to build the circuit on the screen and test it by placing probes in the circuit. As the simulation progresses, the signal values change in the probes in the circuit, as well as in a timing diagram and in a spreadsheet. You can change the input values by clicking directly in the inputs in the circuit.

Product Name: B2 Spice v5
Company: Beige Bag Software

B2 Spice v5 has two modes for analyzing a circuit, an non-interactive Test mode with defined parameter for each Test, and a interactive Simulation, which runs indefinitely until reset by the user. The Simulation mode is controlled by the main toolbar and consists of the Reset, Pause, Step, Walk, and Run buttons. These control the progress of operation of the Simulation. The Step Ceiling and Update Interval settings control how the Simulation progresses and how often the results are updated.

Product Name: Analog FastSPICE AMS Mixed-Signal Simulator
Company: Berkeley Design Automation, Inc.

The Analog FastSPICE™ AMS mixed-signal simulator (AFS AMS™) delivers the industry’s simplest, fastest, most-accurate verification of today’s complex nanometer-scale mixed-signal circuits. AFS AMS combines the Analog FastSPICE circuit simulator with any leading Verilog® simulator to provide full Verilog-AMS language support. AFS AMS follows the successful deployment of AFS Co-Simulation.

Product Name: PLL Noise Analyzer™
Company: Berkeley Design Automation, Inc.

PLL Noise Analyzer™ is the industry’s first noise analysis tool for phase-locked loops (PLLs). PLL Noise Analyzer addresses a leading cause of silicon re-spins - analog noise and jitter - enabling circuit designers to reliably meet cost, performance, and schedule goals. PLL Noise Analyzer is based on Berkeley Design Automation’s proprietary Precision Circuit Analysis™ technology which delivers fast and accurate circuit analysis results.

Product Name: UHAB
Company: BitSim AB

The UHAB has both analog to digital and digital to analog converters on board as well as the new large Virtex-4 SX FPGAs. The 2 channel ADC has a bandwidth of 1.7 GHz and up to 1.5 GS/s with an 8-bit resolution (ENOB 7,0-7,4 bits). This makes it capable of continuous acquisition at up to 3.0 GS/s. The analog inputs have adjustable attenuators, so the inputs can be adjusted 0-31 dB in 1 dB steps.

Product Name: Virtuoso® AMS Designer Simulator
Company: Cadence Design Systems, Inc.

Cadence® Virtuoso® AMS Designer is a mixed-signal simulation solution for the design and verification of analog, RF, memory, and mixed-signal SoCs. It is integrated with the Virtuoso full-custom environment for mixed-signal design and verification. It is also integrated with the Cadence Incisive® functional verification platform for mixed-signal verification within the digital verification environment.

Product Name: Virtuoso® Multi-mode Simulation
Company: Cadence Design Systems, Inc.

Cadence® Virtuoso® Multi-Mode Simulation meets the changing simulation needs of designers as they progress through the design cycle--from architecture exploration to analog and RF block-level development and to final analog and mixed-signal full-chip verification.

Product Name: Virtuoso® Spectre® Circuit Simulator
Company: Cadence Design Systems, Inc.

Cadence® Virtuoso® Spectre® Circuit Simulator provides fast, accurate SPICE-level simulation for tough analog, radio frequency (RF) and mixed-signal circuits. It is tightly integrated with the Virtuoso custom design platform and provides detailed transistor-level analysis in multiple domains. Its superior architecture allows for low memory consumption and high-capacity analysis.

Product Name: Virtuoso® UltraSim Full-chip Simulator
Company: Cadence Design Systems, Inc.

The Cadence® Virtuoso® UltraSim Full-Chip Simulator is a high-performance transistor-level FastSPICE circuit simulator for verifying large custom, analog/mixed-signal, RF, memory and SoC designs. It uses true hierarchical simulation with patented isomorphic and adaptive partitioning algorithms to provide the capacity, accuracy, and speed required for design and verification, regardless of design type or stage in the design cycle.

Product Name: CEVA-TeakLite Family
Company: CEVA, Inc.

Digital signal processing is a key technology that is powering many of today’s fastest growing electronics markets. CEVA is the world's leading licensor of programmable DSP cores and Platforms and Solutions.

Product Name: CEVA-VoP
Company: CEVA, Inc.

With the increasing adoption of broadband connectivity, the required infrastructure is now in place for Voice-over-Internet-Protocol (VoIP) services to finally reach critical mass. Responding to market demand, wireless communications carriers, software vendors and device manufacturers are striving to develop a range of products and services that exploit this technology.

Product Name: CEVA-X1622
Company: CEVA, Inc.

The CEVA-X family of cores is based on a unique mix of Very Long Instruction Word (VLIW) and Single Instruction Multiple Data (SIMD)architectures. The VLIW architecture allows a high level of concurrent instructions processing, thereby providing extended parallelism and low power consumption. The SIMD architecture allows single instructions to operate on multiple data elements, thereby resulting in code size reduction and increased performance.

Product Name: Path FX
Company: CLK Design Automation

Are there paths where static timing analysis is too pessimistic?Are there timing failures that static timing missed?Path FX helps to close timing for critical paths. The FX variance engine is 1 million times faster than Monte Carlo SPICE but still easily within 2% of the results for total path delay.

Product Name: CX93510
Company: Conexant Systems Inc

Conexant's CX93510 encoder is a mixed-signal Application-Specific Standard Product (ASSP) specifically designed for motion sensors with visual verification and image and video monitoring applications. The CX93510 supports JPEG and MJPEG image compression and processes both color and black and white images up to 30 fps. Combined with an external CMOS sensor, the CX93510 retrieves and stores compressed JPEG and audio data in an on-chip 256 KB/128 KB frame buffer so no external memory is required. The ASSP is controlled through a simple register set via the microprocessor interface and allows for wide flexibility in microprocessor selection. The device is a flexible, cost-effective, and low-power ASSP ideally suited for security applications requiring visual verification.

Product Name: For analog / RF designers (mixed & custom)
Company: Coupling Wave Solutions

Analog/RF IPs can both inject noise and be sensitive to external noise (from other blocks).   The WaveModeler™ tool creates a complete noise model capturing noise signatures obtained from Spice simulations, with internal impedance modeled as S-parameters or lumped devices. The designer can also specify analof IP, electrical nodes and place observation points in key areas (particularly sensitive to external noise).

Product Name: DQ80251
Company: Digital Core Design

The DQ80251 is a revolutionary Quad-Pipelined ultra high performance, speed optimized soft core of a 16-bit/32-bit embedded microcontroller. The core is fully configurable and allows selection of its features and peripherals, to create a dedicated system. It has been designed with a special concern of performance to power consumption ratio. This ratio is extended by an advanced power management PMU unit.  

Product Name: AutomationDesk
Company: dSPACE GmbH

AutomationDesk offers a powerful and convenient test automation environment to meet the requirements of automotive development for today and tomorrow. Automated testing can be done during early function development as well as in hardware-in-the-loop (HIL) simulation

Product Name: EMS
Company: EMWORKS

EMS is a 3D electromagnetic field simulator software suite, based on the powerful finite element method. Currently, it is the only electromagnetic Add-in to SolidWorks®, the #1 CAD package. EMS is Gold Certified by SolidWorks® and targets four main areas: electromechanical, electromagnetic, power electronics, and electromagnetic behaviour.

Product Name: ecVERSIM
Company: ExpertControl GmbH

In large Simulink projects several engineers work on the same model and they often want to edit subsystems of the same mdl-file at the same time. Conventional version control software products do not support syntactical correct merging of mdl-files together with version control management for single subsystems. ecVERSIM treats each Simulink subsystem as a separate module and so allows for parallel development inside the different subsystems as if they were separate files. The user-friendly GUI allows to maintain control even over large and complex Simulink™ models. The modular philosophy of ecVERSIM allows for highly parallel development even of large single Simulink models.

Product Name: Integrated
Company: Freescale Semiconductor Inc.

Integrated Sensors

Product Name: VeloceRaptor/x
Company: Helic, Inc.

VeloceRaptor/X is a breakthrough RLCK extraction tool with unparalleled capacity and speed in the modeling of integrated passives such as transmission lines, interconnects, digital high-speed lines, spiral inductors and metalinsulator-metal (MIM) capacitors.

Product Name: Tanto2 multiTEST
Company: Hitex Development Tools

For Tessy – the software tool for automated, dynamic unit test for embedded software – an extension module Tanto2 multiTEST for Hardware-In-the-Loop (HIL) testing is available. This extends the testing of embedded software from pure software testing to the testing of the hardware environment and the physical interfaces of the application system.

Product Name: OSIRIS
Company: IN2FAB Technology

IN2FAB's OSIRIS porting software provides the most advanced design migration software for analog and mixed signal designs. Fully integrated with design tools from Cadence design systems, OSIRIS works with parameterised cells and process design kits to translate designs while maintaining the integrity of the library data.

Product Name: chronVAL
Company: INCHRON GmbH

chronVAL is a real-time analysis tool to analyze, optimize and validate single and distributed embedded systems with regard to worst case scenarios. The integrated design, diagnosis and test tool chronVAL enables designers to analyze the dynamic behavior of embedded systems' software and bus communication including multi processor configurations.

Product Name: Advanced Design System
Company: Keysight Technologies

Advanced Design System is the world’s leading electronic design automation software for RF, microwave, and high speed digital applications. In a powerful and easy-to-use interface, ADS pioneers the most innovative and commercially successful technologies, such as X-parameters* and 3D EM simulators, used by leading companies in the wireless communication & networking and aerospace & defense industries. For WiMAX™, LTE, multi-gigabit per second data links, radar, & satellite applications, ADS provides full, standards-based design and verification with Wireless Libraries and circuit-system-EM co-simulation in an integrated platform. Watch our ADS 30-Second Demos to see the powerful and easy-to-use ADS interface in action.   Key Benefits of ADS
  • Complete, integrated set of fast, accurate and easy-to-use system, circuit & EM simulators enable first-pass design success in a complete desktop flow
  • Application-specific DesignGuides encapsulate years of expertise in an easy-to-use interface
  • ADS is supported exclusively or months earlier than others by leading industry and foundry partners

Product Name: GoldenGate RFIC Simulation & Analysis Software
Company: Keysight Technologies

GoldenGate RFIC Simulation and Analysis Software is an advanced simulation and analysis solution for integrated mixed signal RFIC designs that is fully integrated into the Cadence Analog Design Environment (ADE). GoldenGate is part of Keysight's RFIC simulation, analysis and verification solution that also includes Momentum for 3-D planar electromagnetic simulation, SystemVue & Ptolemy wireless test benches for system-level verification, and the Advanced Design System (ADS) Data Display for advanced data analysis. This suite links the RF system, subsystem, and component-level design and analysis as part of a unique and comprehensive RFIC design flow. Key Benefits of GoldenGate
  • Best performance, capacity and accuracy to complete your RFIC designs on time with the highest level of designer productivity
  • Delivers increased manufacturability using powerful Monte Carlo, Corners and Yield analysis capability
  • Uniquely verifies 3G and 4G RF performance using standards-based system level test benches

Product Name: LayPAR
Company: LayTools

The LayTOOLS Place and Route package (LayPAR) may be used as a stand-alone tool or as an integrated component of the LayTOOLS Suite. Although initially targeted at medium-sized designs (more than 100,000 gates) for mixed-signal application, it does integrate advanced algorithms which allow it to handle even larger numbers of cells and macros in an efficient manner without manual intervention.

Product Name: MSIM
Company: Legend Design Technology, Inc.

MSIM is a matrix-inversion based circuit simulator with optimized algorithms to deliver unparalleled accuracy, performance and value.

Product Name: MSIM API
Company: Legend Design Technology, Inc.

MSIM API is a matrix-inversion based circuit simulator module with optimized algorithms and extensive modeling support. Since MSIM API and application software modules are integrated in one single executable program, it promotes significant improvement in overall system performance, robustness, stability and consistency.

Product Name: Turbo-MSIM
Company: Legend Design Technology, Inc.

High-Speed and High-Capacity Circuit Simulator. Turbo-MSIM is a high-speed and high-capacity circuit simulator with SPICE-like accuracy.Turbo-MSIM is ideal for full-chip circuit simulations.

Product Name: NitroSIM™
Company: Liga Systems, Inc.

NitroSIM™ is a Hybrid Simulator powered by a revolutionary custom VLIW processor, optimized for software simulation, capable of delivering dramatic performance improvements to the desktop while enabling scalability of RTL software simulation to unparalleled capacity levels.

Product Name: PeakView HF Designer
Company: Lorentz Solution

PeakView HFD™ is an interconnect design tool for understanding EM coupling in high-speed analog, RF and custom digital designs. PeakView HFD works early in the design cycle, before DRC / LVS and LPE can be utilized. Working directly from inside the Cadence® Virtuoso® layout environment, PeakView HFD quickly extracts EM-accurate parasitic models of critical interconnect structures that are ready for circuit simulation.

Product Name: Master & Slave AMBA AHB / VCI bus wrappers
Company: Magillem Design Services

The Master and Slave AMBA AHB bus wrappers are used to connect bus independent Intellectual Properties (IPs) to an AMBA AHB  bus controller. They let system designers seamlessly integrate VCI compliant IPs in their system core, enabling a practical reuse methodology.  Two versions of the wrapper are available, one for masters and another for slaves. They both manage burst transfers in order to increase the bus throughput.

Product Name: M199 - USM Main M-Module™
Company: MEN Mikro Elektronik GmbH

USM Universal Submodules make M-Modules™ more flexible than ever...

Product Name: M35N - 8/16 Analog Inputs, 14 Bits
Company: MEN Mikro Elektronik GmbH

The M35N is a 14-bit analog M-Module™ for a wide range of standard input requirements such as 16 channels single-ended voltage or current and 8 channels differential voltage or current...

Product Name: M62N - 16 Analog Outputs
Company: MEN Mikro Elektronik GmbH

The M62 is an analog output device with as many as 16 channels on one single M-Module™...

Product Name: Eldo RF
Company: Mentor Graphics

Third generation RF IC algorithm highly optimized for both capacity and performance  Multi-tone, steady-state analysis for large RF IC designs containing thousands of elements Modulated steady-state analysis and digitally modulated sources covering all wireless standards

Product Name: Questa ADMS
Company: Mentor Graphics

The Mentor Graphics Questa ADMS ™ (ADMS) simulator gives designers acomprehensive environment for verifying complex analog/mixed-signal (AMS)System-on-Chip (SoC) designs. ADMS combines four high performancesimulation engines in one efficient tool: Eldo™ for analog large-signal andfrequency domain simulations, ModelSim® for digital simulations, Mach™ for fasttransistor-level simulations and Eldo-RF™ for modulated steady state simulation.

Product Name: I2C Bus/SMBus Analyzer Software
Company: Micro Computer Control Corporation

Developers working with the I2C Bus, SMBus, or Smart Battery Systems no longer need to guess at bus traffic. In addition to seeing your Smart Battery messages in engineering units, this package allows you to see your data in ASCII or Hex, with options to control the display of Start, Stop, Read/Write.

Product Name: I2C Message Center for Linux
Company: Micro Computer Control Corporation

Use Message Center to send up to 50 messages to I2C Bus slave devices. Enter, edit, save, load and auto-repeat message lists. Create messages with a click of your mouse.

Product Name: NOD - Nominal Diagnosis
Company: MunEDA-ChipMD

NOD enables the user to perform powerful analyses based on typical (nominal) process characteristics. The designer gets insight into dependencies between performances and parameters with very small simulation effort.

Product Name: RSM - Model Generation
Company: MunEDA-ChipMD

RSM generates Response Surface Models of the analysed circuit. This enables the designer to speed up simulations and therefore the circuit analysis and optimization steps. Furthermore sub-blocks of larger systems can be modelled.

Product Name: MyAnalog Station V6.3
Company: MyCAD, Inc.

MyAnalog Station V6.3 is the schematic capture with circuit-level simulator solution for circuit design. MyAnalog Station V6.3 enables the efficient circuit design and manipulation of hierarchical structured circuits from analog library subsets that are mostly frequently used device in SPICE and user-defined compositions. Schematics are created in schematic editor interpreting through MySPICE. MySPICE is a circuit simulator based on Berkely SPICE.

Product Name: MATRIXx
Company: National Instruments Corp.

Engineers worldwide in aerospace, defense, automotive, and academia rely on the industry-proven National Instruments MATRIXx product family for model-based design, simulation, and embedded code generation. With the NI MATRIXx software suite, you gain a complete solution from initial design to final production for your dynamic embedded control system.

Product Name: SignalExpress
Company: National Instruments Corp.

SignalExpress is interactive software for quickly acquiring, comparing, automating, and storing measurements. Use SignalExpress to streamline your exploratory and automated measurement tasks for electronics design, validation, and test

Product Name: Low Noise Op Amps
Company: National Semiconductor

Low noise op amps from National Semiconductor offer ultra low noise specifications combined with precision specifications such as low offset voltage, low offset voltage drift, low input bias current, and low power consumption.

Product Name: OptEM Inspector
Company: OptEM Engineering, Inc.

OptEM Inspector is a software tool that screens the physical IC layout, extracts the resistance and capacitance of the interconnects and devices, and reports any potential crosstalk and time delay problems found in the design. What is unique about OptEM Inspector is its capability to extract device substrate resistance in addition to the interconnect resistance and fringe, area, and lateral capacitances

Product Name: Arana
Company: Orora Design Technologies, Inc.

Arana is an industry-first tool for the automated analysis, behavioral modeling, visualization, design exploration and debugging of analog and RF mixed-signal circuits. Starting with a Cadence schematic or HSPICE/Spectre netlist, Arana automatically derives the analytic equations of circuit characteristics in terms of design, layout and process parameters.

Product Name: Arsyn
Company: Orora Design Technologies, Inc.

Arsyn is a powerful design space search and tradeoff analysis tool for analog/RF mixed-signal circuit design and behavioral modeling. It enables analog/RF design reuse, and the ability to gain design insights and efficiently explore the design space. A designer starts with a parametric design (e.g. a circuit where some transistors are unsized or some topologies have multiple options), and a set of design specifications (gain, noise, power). Arsyn searches the design space and produces a set of design solutions that represent the best possible design tradeoffs among design specifications.

Product Name: Single TMS320C40 Processor MIX Baseboard
Company: Pentek Inc.

Model 4284, is a powerful platform on which to configure a custom VMEbus MIX subsystem. It incorporates TI’s TMS320C40 which acts as a controller and performs high-speed signal processing.

Product Name: SmartSpice Analog Circuit Simulator
Company: Silvaco

Delivers the highest simulation performance and accuracy required to design complex analog circuits, analyze critical nets, characterize cell libraries, and verify analog mixed-signal designs. SmartSpice is compatible with popular analog design flows and foundry-supplied device models.
Operating Systems: Linux, Windows, Solaris

Product Name: UTMOST Spice Modeling Software
Company: Silvaco

Generates the most accurate, high quality SPICE models for analog, digital, mixed-signal, and RF applications. Leading IDMs, foundries, and fabless companies use UTMOST III to perform data acquisition, device characterization, parameter extraction, and model verification
Operating Systems: Linux, Windows, Solaris

Product Name: SymTA/S Network
Company: Symtavision GmbH

In embedded networks, hundreds of signals and messages are sent over shared buses under the control of arbitrating protocols (CAN, FlexRay …) Verifying and optimizing network configurations for throughput and worst-case delay are key to reliable, cost-effective and extensible communication architectures.

Product Name: Analog Layout Integrated Synthesizer
Company: SynCira Corp.

The art and practice of analog IC layout has not changed significantly in over 30 years. Sure, LVS is near perfect, DRCs cover almost every rule and SDL eliminates Pcell generation; but placement and routing are still manual efforts. Furthermore, the electrical layout constraints (ie. matching, routing capacitance, ground drops, current density, antenna effects), require experts to properly lay out. 

Product Name: T-Spice
Company: Tanner EDA

Tanner EDA T-Spice provides fast, accurate simulation for large circuit analog and mixed-signal IC designs.  T-Spice not only simulates large circuits quickly and with a high degree of accuracy, but integrates easily with your other design tools and is compatible with industry leading standards. T-Spice includes improved accuracy with advanced modeling, multi-threading support, device state plotting, real-time waveform viewing and analysis and a command wizard for simple SPICE syntax creation, saving you time and money. FEATURES & BENEFITS:
  • Fast, accurate analog and mixed-signal circuit simulation (Additional T-Spice Engine licenses can boost your innovation and experimentation capability with greater simulation capacity.  Perform simultaneous runs and increase simulation run-time by adding up to ten (10) more engines).
  • Multi-threading support
  • HSPICE® and PSpice® compatible syntax
  • Foundry Proven: RTL to GDSII, PDKs, and foundry process support
  • Advanced Modeling support:  Create customized models of any device & Verilog-A and Verilog-AMS support
  • Accurately characterize circuit behavior using virtual data measurements, Monte Carlo analysis, parameter sweeping, DC/AC analysis, transient/noise analysis, Levenberg-Marquardt non-linear optimizer, plot statements and parameter definitions and bit or bus logic waveform inputs.
  • Foundry Model support:  T-Spice supports the latest industry foundry models, including PSP, BSIM3.3, BSIM4.6, BSIM SOI 4.0, EKV 2.6, MOS 9, PSP, RPI a-Si & Poly-Si TFT, VBIC, and MEXTRAM models to allow easy integration of legacy designs and foundry models.

Product Name: Logic Analyzers
Company: Tektronix, Inc

Tektronix, the market leader in Logic Analyzers, provides breakthrough digital systems analysis tools that enable digital hardware and software designers to capture and analyze the source of elusive problems that threaten product development schedules.

Product Name: Real-Time Spectrum Analyzer
Company: Tektronix, Inc

RF signals change over time, often unpredictably. To effectively characterize these signals, engineers need next generation tools that help them solve unexpected problems. Tektronix Real-time spectrum analyzers offer the unique capability

Product Name: Automotive : Analog and Mixed Signal
Company: Texas Instruments Inc.

Cost-effective total board system solutions, conformance to specifications, product documentation, superior quality standards and on-time delivery are important to the automotive community. TI supports the requirements defined by the automotive industry, and continues to add to the analog and mixed signal automotive portfolio

Product Name: VCA-1 Platform
Company: Triad Semiconductor

The VCA-1 platform contains 34 Op-Amps and analog building blocks to create a wide range of analog circuits with bandwidths from DC to 10 MHz. The op-amps on the VCA-1 support via-configurable gain bandwidths from 2 to 25 MHz.

Product Name: VCA-3 Low-Cost Analog Array
Company: Triad Semiconductor

The VCA-3 via-configurvble mixed-signal array is targetd at cost-senstive applications requiring analog functionality. The VCA-3 array has sufficient digital resources for state machines or serial communications link such as 12C or SPI.

Product Name: VCA-5 Wideband Mixed Signal
Company: Triad Semiconductor

The VCA-5 combines digital, EEPROM, analog, and analog resources on a signal ASIC array to address a wide range of high speed mixed signal applications.

Product Name: CANextender
Company: Vector Cantech, Inc.

The CANextender is a programmable input/output device for CAN systems that can be used where analog and digital measurements must  be  acquired and transmitted to the CAN bus via CAN mes-sages.  For  this  purpose,  the CANextender reads in digital and analog signals and evaluates them according to  a  configuration program  created by the user. The configuration program thus specifies via which CAN messages and how often the measurement values are transmitted on the CAN bus. 
 

Product Name: AMSvkit
Company: YOGITECH

YOGITECH's Analog Mixed Signal Verification Kit (AMSvkit) enables an automated, coverage-driven verification environment and methodology for top-and block-level mixed-signal designs. The AMSvKit comprises an extensible set of configurable, plug-and-play pre-verified verification components that unify Specman Elite and a mixed-signal simulator to create an Object-Oriented mixed-signal functional verification environment.

Product Name: Signal Integrity
Company: Zeni EDA

In deep sub-micron technology, interconnect delays and the impact of crosstalk due to parasitic coupling have exceeded gate delays in becoming the main concerns of IC designers on circuit functionality and performance. Zeni SI is a fast and precise signal integrity tool dealing with signal delay analysis, noise analysis and RC reduction.

Product Name: SPICE Simulator
Company: Zeni EDA

Convergence is often a problem with many simulators especially in power electronics. This is because the wide range of currents, voltages and conductances present in power circuits stretches the precision of the underlying algorithms. Many other products have to be coaxed into completing such designs by requiring the user to experiment with various option settings.

Design Suites : Analog and Mixed Signal

Product Name: AT810
Company: Abilis Systems

The ATON™ AT810 is a low power, low system cost and high performance silicon based tuner for consumer products e.g. Set Top Box, PC TV, Portable TV, DVD Players, Automotive Media applications.

Product Name: CEVA-Bluetooth
Company: CEVA, Inc.

Bluetooth is a widely-used wireless technology standard for creating personal area networks (PANs). Bluetooth was originally conceived to securely carry speech and data over short distances of typically a few meters. Propelled by its popularity in hands-free headsets and automotive hands-free kits, Bluetooth is approaching virtual universal availability in wireless handsets and smartphones, and other mobile consumer electronic products including tablet computers, portable media players, portable game consoles, and automotive applications.

Product Name: AUBION X.8
Company: DSPECIALISTS Digitale Audio- und Messsysteme GmbH

AUBION X.8 is the first 8-input/2-output converter specifically designed for live sound and installed sound measurement. It provides four XLR/TRS combo mic/line connectors, 8 D-SUB 25 based line inputs and two TRS symmetrically-balanced outputs.

Product Name: PSpice Product Family
Company: FlowCAD Schweiz AG

PSpice A/D and Advanced Analysis provide rapid, complete simulation of analog/mixed-signal circuits. Advanced Analysis prevents board failures by determining which components are over-stressed using Smoke analysis or observing component yields using Monte Carlo analysis. Single-button simulation, cross-probing.

Product Name: Analog, RF and Mixed Signal Design
Company: Intrinsix Corp.

Our mixed signal team has expertise in complex communication, data acquisition and signal processing/signal conditioning IC design. Application areas include wireless, digital media, industrial and automotive in addition to network physical layer designs.

Product Name: JMB355
Company: JMicron Technology Corp.

The JMB355 is single chip solution to bridge between USB 2.0 host or 1394 host and SATA device. The highly integrated USB 2.0, 1394A/B and SATA Phys technology provides a cost-effective solution to apply SATA to SATA device or USB to SATA device or 1394 to SATA device enclosure. The USB adheres to the Mass Storage Class Bulk-Only Transport Specification. The embedded command parser supports both ATA and ATAPI command set with LBA48 bit addressing capability. The 1394 adheres to SBP-2 specification. And SBP-2 acceleration hardware is embedded to off-load CPU and easy firmware control.

Product Name: EMPro Electromagnetic Simulation
Company: Keysight Technologies

Electromagnetic Professional (EMPro) is Keysight EEsof EDA's electromagnetic (EM) simulation software design platform for analyzing the 3D EM effects of components such as high-speed and RF IC packages, bondwires, antennas, on-chip and off-chip embedded passives and PCB interconnects. EMPro EM simulation software features a modern design, simulation and analysis environment, high capacity simulation technologies and integration with the industry’s leading RF and microwave circuit design environment, Advanced Design System (ADS) for fast and efficient RF and microwave circuit design. Key Benefits of EMPro EM Simulation Software
  • Design Flow Integration: Create 3D components that can be simulated together with 2D circuit layouts and schematics within ADS, using EM-circuit cosimulation
  • Broad Simulation Technology: Set up and run analyses using both frequency-domain and time-domain 3D EM simulation technologies: Finite Element Method (FEM) and Finite Difference Time Domain (FDTD)
  • Efficient User Interface: Quickly create arbitrary 3D structures with a modern, simple GUI that saves time and our EMPro EM simulation software provides advanced scripting features

Product Name: Genesys RF & MW Design Software
Company: Keysight Technologies

Genesys is an affordable, accurate, easy-to-use RF and microwave simulation software created for the circuit board and subsystem designer. As a proven safe investment with an installed base of over 5,000 satisfied designers, Genesys literally pays for itself within the first year of deployment by eliminating wasteful hardware iterations through automated circuit synthesis and accurate design. Key Benefits of Genesys
  • Industry’s widest coverage of automated RF & microwave filter, matching and circuit synthesis
  • RF system analysis and frequency planning with interactive root-cause problem identification
  • Linear and nonlinear RF circuit simulators with optimization and statistical analysis for high-performance and high-yield designs
  • 3D-planar EM simulator for analyzing printed circuit board and antenna layout to reduce board turns
  • 3X more affordable than competitive products that offer less capablity

Product Name: PDA16
Company: Signatec, Inc.

The PDA16 is a dual channel waveform capture board that provides a remarkable combination of high speed and high resolution sampling along with a very large memory capacity.  Signal frequencies up to 700 MHz can be accurately captured either in baseband or in higher order Nyquist zones using under-sampling techniques.

Product Name: HiPer Silicon AMS
Company: Tanner EDA

Tanner EDA, by Mentor Graphics, delivers an unrivaled full flow mixed-signal tool suite; HiPer Silicon AMS™ the industry’s leading full flow mixed-signal solution provides a seamless and efficient solution for today’s IC design teams.  HiPer Silicon AMS consists of highly-integrated front end and back end tools, from schematic capture, mixed-signal simulation, layout, synthesis, place and route, to physical and functional verification. HiPer Silicon AMS is used by over 30,000 engineers for analog, mixed-signal, ASICs and MEMS devices. Many customers such as Phillips, Catalyst Semiconductor, Honeywell, Jet Propulsion Laboratory, Cirrus Logic, NEC, Ricoh Company Ltd., Sarnoff Corporation, Xerox Corporation  have used Tanner EDA tools, across many industry and application areas, such as: Power Management, Image Sensors, Biomedical, Military, Aerospace, Space, Defense, Consumer Electronics, Sensors, and new emerging segments like Internet of Things (IoT). FEATURES & BENEFITS:
  • A complete analog and digital IC design environment supporting analog, digital and mixed-signal domains in one highly-integrated full flow
  • OpenAccess, LEF/DEF, Liberty™ and SDF support
  • Simulate combined netlists: behavioral models, block level RTL/gate and transistor level blocks
  • Advanced verification and debugging with Verilog®, Verilog-AMS, Verilog-A and VHDL
  • Top-down mixed-signal co-simulation
  • Proven, compatible synthesis with DFT support
  • High-speed timing analysis
  • Full custom layout editor with interactive or real-time DRC
  • Hierarchical DRC and netlist extraction with foundry compatibility
  • Productive place & route for mixed-signal design
  • RTL to GDSII with PDK support
  • Platform independence on Windows® or Linux®
  • Ease of use: Intuitive and quick learning curve
  • Flexible licensing
Full Flow Mixed-Signal Tool Suite – HiPer Silicon AMS™ Schematic Capture ✓ SPICE Simulation ✓ Waveform Analysis ✓ Behavioral Modeling ✓ Mixed-Signal Simulation ✓ Digital Simulation ✓ Full Custom Layout Editor ✓ Interactive DRC ✓ Node Highlighting ✓ Schematic Driven Layout ✓ Chip Assembly Router ✓ Analog Layout Acceleration ✓ Design Rule Checking, DRC & LVS ✓ 2D Parasitic Extraction ✓ 3D Parasitic Extraction ✓ Synthesis ✓ Digital Place and Route ✓ Static Timing Analysis ✓ Design For Test ✓

ASIC and IC Design : ASIC Physical Synthesis

Product Name: CoDeSys SP RTE
Company: 3S - Smart Software Solutions GmbH

When working with a PC with Windows XP operating system an adaptation of the runtime system is not necessary as the complete process of system integration has already been done in the SoftPLC CoDeSys SP RTE.

Product Name: SMX2060/2064
Company: ADLINK TECHNOLOGY INC.

The SMX2064 and SMX2060 are the only 7-1/2 digit Digital Multimeters available in PXI format, are much faster than any bench-top DMM, and maintain high accuracy at high measurement rates. The SMX206x series provides a comprehensive set of DMM capabilities, including 2-wire, 4-wire, and 6-wire guarded resistance measurements; inductance and capacitance; leakage and temperature; frequency and timing; sourcing of voltage and current; and much more.

Product Name: TSIM ERC32/LEON simulator
Company: Aeroflex Gaisler AB

TSIM can be run in stand-alone mode, or connected through a network socket to the GNU gdb debugger. In stand-alone mode, a variety of debugging commands are available to allow manipulation of memory contents and registers, breakpoint/watchpoint insertion and performance measurement. Connected to gdb, TSIM acts as a remote target and supports all gdb debug requests.

Product Name: Quartus II
Company: Altera Corporation

Quartus II software delivers the most comprehensive programmable logic and structured ASIC design flows available:
   - FPGA Design Flow
   - CPLD Design Flow
   - Structured ASIC Design Flow

Product Name: cStack™
Company: Amphenol InterCon Systems, Inc.

High-speed solderless interconnect solution provides limitless flexibility for board to board mezzanine applications and board to board stackable and coplanar applications when terminated to a flex circuit. 1mm – 5mm housing heights provide a solution for any application where space is tight and speed and reliability are required.

Product Name: AASPICE
Company: Anasift Technology Inc.

AASPICE is Anasift's high performance, high accurate analog simulator integrated with AMPSO analog optimization engine as a verification tool. It supports bsim3, bsim4, SOI, hisim, mos9, other models, and HSPICE netlist.AASPICE is targeted for the analog simulation of high-performance analog circuits used in high-speed communications, networking, display, storage, consumer electronics, etc.

Product Name: AMPSO
Company: Anasift Technology Inc.

AMPSO™ is an analog optimization system based on Symbolic-Driven Optimization (SDO) for high performance analog linear amplification circuits and other analog building blocks including opamps, analog buffers, comparators, voltage regulators, line drivers/receivers and other circuit blocks. AMPSO is sold as a stand-alone analog optimization system.

Product Name: AMPSO-OADFM
Company: Anasift Technology Inc.

AMPSO-OADFM, incorporating the engine of Anasift's analog optimization tool AMPSO, is targeting at the optimization of analog design for manufacturability for all kinds of analog building circuits including opamps, analog buffers, comparators, voltage regulators, line drivers/receivers, trans-impedance amplifiers, and other analog building blocks, or the analog characteristics of small digital cells

Product Name: Atmel AVR 8- and 32-bit
Company: Atmel Corporation

Atmel® AVR® 8- and 32-bit microcontrollers deliver a unique combination of performance, power efficiency, and design flexibility. Optimized to speed time to market, they are based on the industry's most code-efficient architecture for C and assembly programming.

Product Name: Mobile Phones ASICs
Company: austriamicrosystems AG

Global leaders trust ams for special functions in mobile phones such as low-noise, high-voltage MEMS microphone interfaces. MEMS microphones offer space savings, better sound quality and reliability.

Product Name: ASIC
Company: Baegan Technologies

At Baegan we Design, Develop and mass Produce ASIC's (Chips) targeting markets of Power, Industrial, Automobile and Communication. Typical customers are Embedded System Developers and full system, discrete type, PCB solution providers. We design chips for the Indian Market as of now. Our customers are mostly Indian's – But things could change in the near future.

Product Name: Analog FastSPICE RF Periodic Noise Analyses
Company: Berkeley Design Automation, Inc.

Device noise is critical in sub-90nm CMOS processes and fundamentally limits circuit performance at 45nm and below. Analog FastSPICE RF Analyses (AFS RF) is the industry’s first full-spectrum device noise analysis for RF circuits. AFS RF accurately analyzes nanometer-scale effects for all types of pre-layout and post-layout periodic circuits.

Product Name: Vortex Gearbox™ AVSP-1104
Company: Broadcom Limited (formerly Avago Technologies)

The Vortex Gearbox™ AVSP-1104 is a single-chip 100Gbps gearbox PHY IC designed for high-density 100G Ethernet and Optical Transport Networking (OTN) applications. The device supports full-duplex multiplexing of ten 10/11Gbps channels and de-multiplexing of four 25/28Gbps channels. The device features Avago’s proven 28nm CMOS SerDes technology that has demonstrated compliance with IEEE CAUI and various Common Electrical Interface (CEI) standards that include CEI-11G-SR, CEI-25G-LR, and CEI-28G-VSR. The device also incorporates Avago’s unique proprietary Decision Feedback Equalization (DFE) architecture providing low overall power consumption, low data latency and best-in-class jitter and crosstalk performance.

Product Name: CADopia Professional Edition
Company: CADopia Inc.

CADopia 11 Professional Edition, is the latest release of this popular CAD software. It is an ideal tool for engineers, architects and other CAD professionals who need a full-featured solution at an affordable price. Written for the Microsoft Windows environment, it is well suited for working in conjunction with other Windows applications.

Product Name: CPXP-EP PCI Express Endpoint Controller Core
Company: CAST, Inc.

Implements a PCI Express endpoint controller that is compliant with PCI Express Base specification 1.0a, including the Transaction, Data Link, and Physical protocol layers. The scalable and flexible core has a modular architecture and a high-performance, low-latency design. It supports multiple device link widths to better match the bandwidth needs of specific applications—x1 (single lane) and x4 (four lane)—and offers bi-directional data rates from 250MB/s (x1) to 1GB/s (x4).

Product Name: AOCV FX
Company: CLK Design Automation

With its breakthrough variance engine, AOCV FX generates advanced on chip variation tables in a fraction of the time required by approaches based on Monte Carlo SPICE simulation. The FX variance engine is 1 million times faster than Monte Carlo SPICE but still easily within 2% of the results for total path delay.

Product Name: APS1
Company: Cortus

The Cortus APS1 is a native 32 bit core with a modern RISC architecture. In common with other Cortus processors, the APS1 has a 5 to 7 stage integer pipeline with out-of-order completion ensuring that most integer instructions (load and stores included) are executed in a single cycle.

Product Name: Cosmic 68HC11
Company: Cosmic Software

Cosmic's toolchain for the 68HC11 family is part of a complete and uniform product line incorporating over 20 years of innovative design and development. Cosmic's familiar and easy to use software interface is available for all Freescale microcontrollers to simplify the migration between targets.

Product Name: For SoC integrators and package designers
Company: Coupling Wave Solutions

Whatever the level of maturity of their design, whether they are in the planning stage, want to do a final check before tape-out or if need to solve a problem on silicon, WaveAnalyst™ is the tool to reduce to a minimum noise issues at system level.

Product Name: FPGA Design
Company: DELTATEC

DELTATEC's experience and references in both system design and FPGA development are relevant for projects in the following application. Image
Datacom
PCI
Multimedia
Digital Signal Processing

Product Name: dSPACE Code Generator
Company: dSPACE GmbH

High-Quality Code for Mass Production
  • Automatic production code generation from MATLAB®/Simulink®/Stateflow®
  • Seamless process integration

Product Name: 45nm NEW ASICs
Company: eASIC Corporation

eASIC Nextreme-2 is a family of NEW ASIC devices, manufactured on a 45nm CMOS process, and built using eASIC’s patented single-via customization technology. The eASIC Nextreme-2 family provides ASIC-like performance, power and low unit-cost combined with FPGA-like design flow and rapid delivery of devices.

Product Name: 4-Bit MCU for General Purpose Product
Company: Elan Microelectronics Corp.

For Remote Controller and General Purpose Application 

Product Name: Rotary Switches Division
Company: Elma Electronic AG

Elma's Rotary Switch Division encompasses a broad range of switching and indicating solutions, control knobs and other quality components from all over the world. Our rotary switches are a staple in audio and industrial markets, and Elma's coded switches and encoders are the choice of  premier two-way radio and medical equipment manufacturers globally.

Product Name: CPU Interface
Company: Eureka Technology, Inc.

Eureka Technology, Inc. provides interface cores to all the popular CPUs for SoC design.

Product Name: Smalltalk/X
Company: eXept Software AG

As a special and unique feature, ST/X provides both an interpretive development environment (with the consequence of very short turn-around times), and a true compiler, which translates Smalltalk classes into real machine code files.

Product Name: ecCST
Company: ExpertControl GmbH

Control Algorithm including a powerful technology for bumpless switching between controller parameter sets. Algorithm enables bumpless switching between parameter sets for different operating areas and different process variables (system outputs) and actuators. May be applied directly in simulation and prototyping environments as well as in ECUs. Actuator saturation is taken into account. Precise tracking of desired transitioning profiles between setpoints is ensured.

Product Name: Dual-core Cortex A9-based SoC Platform- SoCreative! IV™
Company: Faraday Technology Corp.

Highly integrated and versatile advance SoC platform for easy adoption to target applications. SoCreative! IV™, Faraday's latest SoC development platform, is based on ARM Cortex-A9 processor at UMC 40nm LP process, consisting of an ARM prototype chip, A380 SoC chip. A380 has a dual-core ARM Cortex A9, and a FA626TE, with either one configurable to be the main processor, depending on customers' application requirement. It also integrates multiple high-speed interfaces including DDR3-1600, PCIE-Gen3, SRIO, SGMII, and USB2.0 (OTG), with AHB extension bus available for connection to FPGA. With a real SoC chip and FPGA, SoCreative! IV™ allows the designer to verify the logic and perform real-time function verification and software development from early stage.

Product Name: MCU-based FPGA Platform-FIE3100
Company: Faraday Technology Corp.

Reusable Cortex - M0/M3 FPGA Platform  Faraday FIE3100 FPGA platform, featuring ARM Cortex-M0/M3 core - the smallest, lowest power consumption, most energy-efficient ARM processor, is especially developed to provide an easy and quick solution to facilitate low power SoC designs with higher scalability, lower risk, and shorter lead time. 

Product Name: SoCreative! III™ SoC Platform
Company: Faraday Technology Corp.

SoCreative! III™ is an ARM SoC development platform for Faraday's new generation SoC ASIC. It consists of an ARM prototype chip (A369) accompanied with an FPGA interface for user logic implementation.

Product Name: 16-bit Microcontrollers
Company: Freescale Semiconductor Inc.

Freescale S12 and S12X MCUs provide high-performance 16-bit control for automotive and industrial applications. The S12X MCUs feature the innovative XGATE module, designed specifically to handle interrupt events without CPU intervention. As a result, the S12X controller has the high-performance capabilities you would normally expect of a 32-bit controller.

Product Name: eTPU : Enhanced Time Processor Unit
Company: Freescale Semiconductor Inc.

The eTPU is a programmable I/O controller with its own core and memory system, allowing it to perform complex timing and I/O management independently of the CPU. The eTPU is essentially an independent microcontroller designed for timing control, I/O handling, serial communications, motor control and engine control applications.

Product Name: HC05 (Legacy)
Company: Freescale Semiconductor Inc.

8-Bit Microcontroller

Product Name: HC16
Company: Freescale Semiconductor Inc.

16 Bit Microcontroller

Product Name: Low g
Company: Freescale Semiconductor Inc.

Freescale’s g-Select low g acceleration sensors are designed to detect on one, two or three axes, allowing your end application the freedom of movement detection it needs. In addition, for multifunctional applications, these devices allow you to select between 1.5g to 12g levels of acceleration.

Product Name: S12 and S12X
Company: Freescale Semiconductor Inc.

Introducing the S12X Family of advanced high-performance 16-bit microcontrollers—based on the popular HCS12 architecture, the S12X Family offers as much as a 5-times performance hike over previous HCS12 devices. While we have added 172 additional instructions to improve paging capability and execute 32-bit calculations, the S12X Family is designed to provide full compatibility with previously written HCS12 code.

Product Name: INFINEON ASIC & POWER IC GROUP
Company: Infineon Technologies

INFINEON ASIC & POWER IC GROUP bundles technology expertise, extensive IP, system know-how and worldwide partner network to enable our customers to develop and market innovative products and solutions. Our global network of design centers and partners with program management capabilities provides custom solutions with ASIC design expertise and local support. We focus on customer needs, delivering best-in-class solutions that speed up our customers’ time-to-market. Our customer defines the business model.

Product Name: HiLo™
Company: Interconnect Systems, Inc

A new connector system with multiple applications: BGA/LGA/µPGA production socketing system Board-to-board connector system

Product Name: pLinesE-VMEb
Company: INTERFACE CONCEPT

pLinesE-VMEb is powered by a MPC8270, being part of the PowerQUICCII processor family. This embedded processor couples a 603e core with a RISC communication processor and three Fast Ethernet controllers.

Product Name: ASIC Design
Company: Intrinsix Corp.

Intrinsix ASIC designers are seasoned professionals with a track record in developing complex ASICs on schedule and within established budgets. We work as a team along side your own systems and ASIC developers. We refine the specifications and requirements to help assure first time success. We architect the chip for design reuse and deliver world-class synthesizable and verified designs.

Product Name: JMB575
Company: JMicron Technology Corp.

JMicron JMB575 is a single chip. It integrated six independent SATA channels and a micro-processor. With proper setting, the chip can be configured as 1 to 5- ports Serial ATA III Port Multiplier or a 5 to 1-port Serial ATA III Port Selector.

Product Name: CMX-USB
Company: Logic Technology BV

The company’s core business is to develop and support real-time, multi-tasking operating systems (RTOS), TCP/IP stacks, Flash File Systems, USB stacks and a CANopen stack for a wide variety of 8-bit,16-bit, and 32-bit microcomputers, microprocessors, and digital signal processors.

Product Name: ProtoMat E33
Company: LPKF Laser & Electronics, North America

Entry-level price, high-quality performance The ProtoMat E33 is LPKF's entry-level printed circuit board milling system. Capable of producing multiple boards in a single day, the system offers a small footprint and ease of use from setup through finished prototype.

Product Name: A14C - 6U VME64 MPC8540 SBC / PMC
Company: MEN Mikro Elektronik GmbH

The A14C is an advanced PowerPC® based single-board computer for embedded applications...

Product Name: F14 - 3U CompactPCI®/Express Pentium® M SBC
Company: MEN Mikro Elektronik GmbH

Equipped with the high-performance Intel® 2-GHz Pentium® M down to the 1-GHz ultra low voltage Celeron® M processor, the single-board computer F14 is a versatile 4 HP / 3U (single-slot, single-size Eurocard) CompactPCI® board, designed especially for embedded systems which require high computing and graphics performance and low power consumption...

Product Name: F601 - 3U CompactPCI® Side Card for Multimedia
Company: MEN Mikro Elektronik GmbH

The F601 is a multimedia extension card for 3U Intel® based CompactPCI® single-board computers such as F14, F15, F17 and further boards of the Intel® low power family...

Product Name: Precision RTL Plus
Company: Mentor Graphics

Precision® RTL Plus provides a new way to design FPGAs — enabling every designer to improve productivity, reach desired performance fast and easily, and control the allocation of dedicated FPGA resources.

Product Name: PowerWise Adaptive Voltage Scaling (AVS)
Company: National Semiconductor

PowerWise Adaptive Voltage Scaling (AVS) is a closed-loop voltage optimization technology for reducing both active and standby energy consumption of digital processors, ASICs, and SoCs

Product Name: Precision Operational Amplifiers
Company: National Semiconductor

Precision is a summation of various DC and AC parameters (e.g. low noise, low offset voltage, low input bias current and other application dependent parameters) and National optimizes these requirements for a wide variety of precision applications. The tables below highlight some of National’s industry-leading precision amplifier products by end application. 

Product Name: 360 EC-ASIC
Company: OneSpin Solutions GmbH

The OneSpin® 360 EC-ASIC Equivalence Checker thoroughly proves, without simulation, that design functionality is maintained through all implementation phases of a design, such as design revisions, synthesis and optimizations, made from RTL to the final netlist – RTL-RTL, RTL-gate and gate-gate – in ASIC/SoC designs. The solution fully automates state and phase mapping via proof-based sequential analysis. A design conditioning component and highly accurate design modeling detect synthesis bugs, synthesis/simulation mismatches and RTL coding bugs that often escape conventional equivalence checking.

Product Name: PCAN-miniPCI
Company: PEAK-System Technik GmbH

The PCAN-miniPCI card enables the connection of embedded PCs and laptops with Mini PCI slots to CAN networks. The card is available as a single or dual-channel version. The opto-decoupled versions also guarantee galvanic isolation of up to 300 Volts between the PC and the CAN sides.

Product Name: PCAN-USB Hub
Company: PEAK-System Technik GmbH

The PCAN-USB Hub provides multiple hardware interfaces through a USB connection. It offers the user one CAN, two RS-232 and two further USB interfaces.

Its robust aluminum casing makes the PCAN-USB Hub suitable for mobile applications.

Product Name: SymTA/S
Company: Symtavision GmbH

Symtavision's scheduling analysis tool suite SymTA/S is used for budgeting, scheduling verification and optimization for processors, electronic control units (ECUs), communication buses, networks and complete integrated systems.

Product Name: FloorDirector 3.0
Company: Teklatech

FloorDirector 3.0 is the latest member of the FloorDirector family. Ground-breaking new features enable ASIC designers to actively shape the power grid noise spectrum of digital circuits. Designs within the wireless and mobile applications segments with tough EMI/EMC requirements in the RF range, as well as noise sensitive mixed-signal ICs, benefit particularly by using FloorDirector's noise shaping ASIC design optimization capabilities, which enable full control over the power noise spectrum of digital circuits. But all digital designs with dynamic power integrity challenges enjoy significant improvements over existing solutions, by fine-grained control over the softening of dynamic power current response curves.

Product Name: DLP Discovery
Company: Texas Instruments Inc.

DLP® Discovery kits enable innovative application development with DLP technology, which is known for its proven reliability, fast switching speed, and high contrast. DLP technology is the only spatial light modulator in production that works with visible, near-infrared and ultraviolet light.

Product Name: I²C
Company: Texas Instruments Inc.

The inter-integrated circuit (I²C) bus consists of two active wires; the bidirectional serial data (SDA) line and the bidirectional serial clock (SCL) line.

Product Name: Signal Switches
Company: Texas Instruments Inc.

Texas Instruments Signal Switches provide high-performance, low-power replacements for standard bus-interface devices when signal buffering (current drive) is not required. TI Signal Switches optimize next-generation datacom, networking, computing, portable communications, and consumer electronic designs by supporting both digital and analog applications, including; PCI interface, USB interface, memory interleaving, bus isolation, and low-distortion signal gating.

Product Name: VCA-4 Low Power , Low Noise
Company: Triad Semiconductor

The VCA-4 combines very low power, low-noise analog resource with low-power digital and EEPROM memory resources on a single ASIC array to address a wide range of precision portable applications.

Product Name: ARM based SoC
Company: TRIAS Mikroelektronik GmbH

ARM Cores are widely used in the automotive, consumer entertainment, imaging, networking, and storage applications. Partners of the Chip Alliance provide a full range of ARM core-based SoC design services with the extensive experience in multi-million gates integration you can be assured that your next ARM based SoC will be a success.

Product Name: Chip Alliance
Company: TRIAS Mikroelektronik GmbH

A Network of ASIC Design Centers offer all types of ASIC & FPGA Solutions one-stop.
Chip Alliance
• One Partner Interface solving all your needs for your ASIC requirements.
• from Turn-key to every individual design services until shipping the final ASIC product.
• get access to a wide range of ASIC/FPGA Design Services and ASIC Technologies.
• A Network of over 400 ASIC/FPGA Design Experts.

Product Name: Physical Design Tools
Company: Zeni EDA


Zeni Physical Design Tool (Zeni PDT) is a fully hierarchical, multi-window, full-custom IC layout editing environment. It supports the physical implementation of custom digital, analog and mixed-signal designs at the device, cell, block and full chip levels.

ASIC and IC Design : Cell & Block Characterization

Product Name: Cadence® Space-based Router
Company: Cadence Design Systems, Inc.

Growing design complexity and more digital and analog/mixed-signal content mean designers face critical yield and manufacturability challenges, such as lithography issues, inconsistent manufacturing rules, copper materials, electrical concerns, and performance requirements. Cadence® Space-Based Router addresses all these concerns simultaneously, helping designers achieve shorter time to convergence, better quality of silicon, and differentiated products for consumer and wireless markets.

Product Name: ChipTimer
Company: Library Technologies, Inc.

ChipTimer is a design optimization and timing closure tool for high performance designs. It is well known that algorithms and architecture are the most important element of performance, but implementation has a lot of leeway impacting performance.

Product Name: Mature Binary
Company: Photronics, Inc.

Photronics strongly supports a broad range of mature technology solutions down to 180nm wafer printing for a wide variety of photomask applications. These technologies remain in volume production today. Photronics has built industry leading service strategies to help customers maximize returns while extending their use of incumbent lithography systems.

Web-based Design Tools : Cloud Computing

Product Name: ADACSync
Company: DSPECIALISTS Digitale Audio- und Messsysteme GmbH

The ADACSync is a 6U, cPCI (PXI compatible), GPS-disciplined, precision, low-jitter clock generator featuring:
  • 12 buffered output channels
  • Five programmable clocks
  • The possibility of an external or onboard reference clock 
  • A high-precision GPS reference clock option

Product Name: FlowCloud SDK
Company: Imagination Technologies Ltd.

The FlowCloud SDK's powerful and growing, yet simple to implement, APIs enable a diverse range of embedded applications supported by web services to be rapidly developed and deployed by Imagination's FlowCloud ecosystem partners.

Structured/Platform ASICs : Debugging

Product Name: aiPop
Company: AbsInt Angewandte Informatik GmbH

The aiPop optimizer suite was developed to reduce the code size, improve the code quality, and, optionally, speed up the execution of assembly or object files produced by a C compiler.

FPGA and PLD Design Tools : Debugging

Product Name: GRMON
Company: Aeroflex Gaisler AB

GRMON is a debug monitor for LEON processors.

Product Name: Beyond Debug Interface Controller
Company: Beyond Semiconductor

The Beyond Debug Interface Controller is connected on one side to the IEEE 1149.1-2001 Beyond TAP Controller as External scan chain Debug Interface register and on the other side to the Debug Unit of Beyond BA processor(s) and/or Beyond peripheral interface cores. It synchronizes signals from all clock domains, while decoding Debug Interface instructions and translating data between serial and parallel interfaces.

Structured/Platform ASICs : Debugging

Product Name: AHA4702D
Company: Comtech AHA Corp.

DVB-S2 Compliant LDPC/BCH Forward Error Correction (FEC) Decoder Core The AHA4702D FEC decoder core is fully compliant with section 5.3 of the Digital Video Broadcast S2 (DVB-S2) standard.  It is capable of 200 Mbit/sec user data rate with a 2/3 rate LDPC Code and 25 iterations in an ASIC.  The core supports all codes, frame sizes, and interleave schemes set forth in the DVB-S2 specification for broadcast, interactive, digital satellite news gathering, and professional services.  The core allows code and modulation changes on a block-by-block basis to fully support both Adaptive Coding and Modulation (ACM) and Variable Coding and Modulation (VCM).

Product Name: EUROScope
Company: EUROS Embedded Systems GmbH

EUROScope is a source-level debugger for embedded systems. Apart from the "usual" features like memory view, register view, assembler view, source view, local/global variable view, breakpoints and call-stack, EUROScope offers an integrated terminal window as well as support for programming Flash chips within the target system.

FPGA and PLD Design Tools : Debugging

Product Name: EXOSTIV
Company: Exostiv Labs

EXOSTIV™ is a new kind of embedded instrumentation used in the lab at ‘board bring-up’. It provides up to 200,000 times more visibility on the system under test than traditional instrumentation techniques. Unlike software-based techniques and emulation, EXOSTIV™ is used on the target or prototyping boards running at speed of operation. It provides an extended visibility on internal nodes over large periods of time – and this, with a minimal impact on the FPGA resources. For more information: www.exostivlabs.com Understand the value of EXOSTIV™: Why EXOSTIV™?  

Product Name: XJTAG Boundary Scan Test
Company: FlowCAD Schweiz AG

XJTAG offers a sensational solution allowing the circuit design, development and manufacturing process to be shortened significantly. XJTAG is a global supplier of IEEE 1149.X JTAG compliant boundary scan development systems.  

Structured/Platform ASICs : Debugging

Product Name: RTOS
Company: Hitex Development Tools

Hitex has accumulated a profound knowledge about real-time operating systems. Being a member of the technical committee of OSEK/VDX, Hitex has been a member in the development and standardization process of the OSEK Runtime Interface (ORTI).

Product Name: TantinoTriCore
Company: Hitex Development Tools

Compact and cost-effective USB-to-JTAG debug interface supporting all run-control debug facilities like breakpoints, watchpoints, single-step, register and memory view for TriCore CPUs.

Product Name: Tessy
Company: Hitex Development Tools

Tessy – The Invaluable Test Tool
  • Automated unit testing of embedded software
  • Easy to begin using - no script language to learn
  • Saves test data for re-use
  • Ideal for regression testing
  • Unlimited number of test cases

FPGA and PLD Design Tools : Debugging

Product Name: TELA LAYOUT OPTIMIZATION
Company: Tela Innovations

The era of sub-wavelength lithography, where features sizes are smaller than the wavelength of light used to resolve them presents many challenges to manufacturers trying to maintain the economic scaling of semiconductors postulated by Moore’s Law. These techniques include optical proximity correction (OPC) and a broad category of techniques described as design for manufacturing (DFM).

Structured/Platform ASICs : Debugging

Product Name: JTAG Debugging
Company: Tilcon Software (acquired by Wind River)

There is only one certainty in embedded development: Bugs will appear. And when complex bugs appear late in the development cycle, they can derail entire projects. With JTAG debugging tools from Wind River, you can be confident that bugs will be found and fixed before project milestones and deadlines are threatened.

Product Name: Embedded Development Kit
Company: XILINX

Xilinx Platform Studio integrated development environment contains a wide variety of embedded tools, IP, libraries, wizards, and design generators to quickly facilitate the creation of your custom embedded platform.

Product Name: XJAnalyser
Company: XJTAG

XJAnalyser is a visual analysis and debugging tool for devices in your JTAG chain. It provides instant chain verification as part of the simple 3-step set-up, and then gives you an interactive graphical view of the pins on your JTAG devices.

Design Services : Design And Services for PCB Assembly

Product Name: PCI I/O Boards
Company: Acromag

Acromag PCI boards are well-suited for COTS and industrial projects. Many models are available for a variety of analog and digital I/O functions. These modules offer an unmatched balance of performance, features, and price for the best value in PCI I/O. Our PCI boards are based on technology and circuit designs with time-tested reliability in thousands of installations. Great effort goes into selecting high-performance parts to withstand the demands of military, aerospace, and manufacturing applications. Most models are available with extended temperature ranges for reliable operation in harsh environments. Acromag products are also designed for the long lifecycles required for OEM and defense projects.

Product Name: FlowProto
Company: Altia, Inc.

FlowProto® is a Microsoft Visio add-on that allows interaction designers to make their flowcharts work for them – by converting the flowcharts into interactive user interface prototypes. FlowProto makes it easy to simulate and test flowcharts to confirm accuracy and completeness. What’s more, the behavior description created by FlowProto can be converted to C code and deployed on an inexpensive embedded target.

Product Name: OrCAD Design & OrCAD Layout
Company: CA Design.

When you have a team of highly skilled USA-based OrCAD Design experts, you are guaranteed that your board is not being assigned to amateur, less experienced OrCAD designers.

Product Name: Specctra Autorouter
Company: CA Design.

CA Design provides training on using Specctra Autorouter. We'll come to your facility for one day or an entire week to help you understand Specctra Autorouter. We can take you through the entire Specctra Autorouter process, teaching you the shortcuts and helpful hints as we go. We can show you, from a real user's point of view, how to set up your designs, your libraries, and your process. CA Design owner, Bob Chandler, will use your own work to illustrate the Specctra Autorouter process.

Product Name: PCB Designer Suite (PCBD)
Company: CAD Design Software

The PCB Designer Suite is suitable for all types of PCBs including Digital, Analog, Flex and most types of RF PCBs. SMT and leaded parts are parametrically created and stored for easy retrieval. An in depth pad stack editor makes custom modifications to components. Components are automatically placed from libraries using package and coordinate data in the net list. Rat (unconnects) lines are colored and dynamically optimized to aid in parts placement.

Product Name: CMX970 - RF Building Block
Company: CML Microcircuits

The CMX970 is a low power IF or RF quadrature demodulator featuring a wide operating frequency range and low power consumption. Suitable for architectures with IF or RF frequencies up to 300MHz the device may be used in low IF systems or those converting down to baseband.

Product Name: PCB Design and Manufacturing Services
Company: Fujitsu Microelectronics

Fujitsu Interconnect Technologies Limited (FICT) provides design, manufacturing, maintenance, and consulting services for printed circuit boards.

Product Name: Noise Source Products
Company: Mercury Systems, Inc.

The Problem: Noise is a random and unpredictable natural phenomenon that occurs everywhere. In RF communication systems; whether wireless, microwave, satellite, audio or video, noise emanates from every component inside the system, sending out "unwanted" signals through the network. Since RF communication receivers often have to process weak signals, the unwanted noise signal, even if it comes from the tiniest component in the system, can easily obscure a signal, resulting in poor overall system performance.

Product Name: Pyxis Professional Services
Company: Pyxis Technology, Inc.

Pyxis Technology has a seasoned team of design, manufacturing and EDA veterans representing hundreds of man years of experience in the design and manufacturing of advanced microprocessor and ASIC designs. Pyxis Professional Services leverages this combination of design and manufacturing knowledge to help designers tackle the emerging design challenges of nanometer technology integrated circuits. 

Product Name: ZMC-Handheld/Portable
Company: Schmid Engineering AG

ZMC-Handheld/Portable is a universal prototype for battery supported measurement devices. It offers re-usable analog, digital and serial I/O, digital signal processing features, real-time math, data storage on removable media, a graphical user interface with touch and wireless datatransfer. That allows to realize custom specific measurement handhelds in a matter of days or weeks.

Design Entry

Product Name: MemConnect™
Company: Eureka Technology, Inc.

MemConnect™ is a Comprehensive, Customizable, and Silicon Proven IP Solution for memory system design. It is a complete memory system supporting any combinations of SDR SDRAM, DDR, DDR2, Mobile SDR, FCRAM, Flash, EEPROM, SRAM and NAND Flash, all in one IP core.

Product Name: ACE™ circuit extraction technology
Company: National Instruments (Formerly AWR Corporation)

ACE circuit extraction technology dramatically reduces from hours to seconds the time required to do the initial modeling of complex interconnects. The new technology enables designers to perform interconnect modeling at the earliest stages of the design flow, where problems can be identified and corrected before costly and time-consuming redesigns are required.

Product Name: Analog Office®
Company: National Instruments (Formerly AWR Corporation)

The Analog Office design suite is a modern and complete design system that is specifically architected and optimized from the ground up for analog and radio-frequency integrated circuit (RFIC) designs. Analog Office software leverages AWR's unique unified data model to provide designers with a concurrent, interconnect-driven and RF-aware design methodology for RFIC and module design.

Product Name: AWR TV™
Company: National Instruments (Formerly AWR Corporation)

AWR has launched a new website AWR TV™! We tailored AWR TV to be a comprehensive "one-stop" resource for product information, tutorial presentations, and application-specific discussions. The site contains more than 50 videos with topics ranging from AXIEM's hybrid meshing to Visual System Simulator™'s WiMAX applications and engineering insights for designing microwave integrated circuits (MICs), monolithic microwave integrated circuit (MMICs), and printed circuit boards (PCBs) within Microwave Office® software.

Product Name: OmniBOM™
Company: Omnify Software

OmniBOM™ is an easy to use, spreadsheet-like bill of materials (BOM) creation and processing tool. Although it is a module in the Omnify Product Suite, OmniBOM can be purchased as a stand alone product, offering customers a comprehensive BOM management tool to create, edit and process BOMs.

ASIC and IC Design : Design for Test

Product Name: aiSee
Company: AbsInt Angewandte Informatik GmbH

aiSee automatically calculates a customizable layout of graphs specified in GDL (graph description language). This layout is then displayed, and can be printed or interactively explored.

Product Name: Astrée Run-Time Error Analyzer
Company: AbsInt Angewandte Informatik GmbH

Astrée is a static program analyzer that proves the absence of run-time errors (RTE) in safety-critical embedded applications written or automatically generated in C.

Product Name: a³: AbsInt Advanced Analyzer
Company: AbsInt Angewandte Informatik GmbH

a³ is a wrapper application that integrates any number of AbsInt’s tools for static program ana­ly­sis in a single intuitive user interface.

Product Name: TimingExplorer
Company: AbsInt Angewandte Informatik GmbH

TimingExplorer offers a set of parameterizable ECU core models to explore the effects of different ECUs or different ECU configurations on the worst-case execution time performance.

Product Name: ValueAnalyzer
Company: AbsInt Angewandte Informatik GmbH

ValueAnalyzer is a static program analyzer for value analysis. It is particularly useful for verifying the absence of illegal accesses to an embedded software system from within third-party modules provided as object code.

Product Name: DFM-Aware PDK QA Platform
Company: Accelicon Technologies

Like for SPICE models, comprehensive QA and verification of the Process Design Kit (PDK) are also required in order to ensure design success. However, with DFM (Design For Manufacture) considerations, Process Design Kit (PDK) has become more and more complicated, more procedures and tools are involved and efforts of verification are tremendous without automation.

Product Name: Model Builder Program (MBP)
Company: Accelicon Technologies

MBPTM is a one-stop solution that provides both automation and flexibility for device modeling needs. Not only shipped with powerful built-in characterization and modeling capabilities, MBP also provides an open interface for user to customize their own modeling strategy. With the representative of such unique architecture, defined as the Task Tree, user can easily make model extraction process adaptable to specific data and always catch up with the state of the art of modeling methodology.

Product Name: CABGA | CTBGA | CVBGA
Company: Amkor Technology, Inc.

Amkor’s ChipArray® packages are laminate based Ball Grid Array (BGA) packages that are compatible with established SMT mounting processes. The near-chip-size standard outlines offer a broad selection of ball array pitch, count, and body sizes.

Product Name: CASON® (ChipArray SON)
Company: Amkor Technology, Inc.

Amkor's CASON packages are laminate-based products available as QFN / QFP (Quad Flat No-Lead) packages. These packages typically have single row of package terminals around the perimeter of the package body.

Product Name: CSPnl™ (DSBGA/WLCSP/WCSP/WLP)
Company: Amkor Technology, Inc.

Amkor's wafer level packaging service meets the industry's growing demand for full turnkey assembly and test solutions for CSP (Chip Scale Package) products. Through the acquisition of Unitive®, Amkor has adopted the CSPnl™ as its standard wafer level package offering.

Product Name: ExposedPad LQFP / TQFP
Company: Amkor Technology, Inc.

This Amkor developed family of power IC packages significantly increases the thermal efficiency of power constrained standard LQFP and TQFP packages. The ExposedPad LQFP / TQFP can increase heat dissipation by as much as 110% over a standard LQFP / TQFP, thereby expanding the margin of operating parameters.

Product Name: FCmBGA
Company: Amkor Technology, Inc.

Amkor’s FCMBGA is the evolution of the SuperFC® high performance flip chip solution. Capillary underfill (CUF) is replaced by molded underfill (MUF).

Product Name: FusionQuad® (VQFP / HVF-PQFP)
Company: Amkor Technology, Inc.

Amkor’s FusionQuad® represents a breakthrough in leadframe-based plastic packaging through the effective integration of ExposedPad TQFP and MLF® technologies.

Product Name: MicroLeadFrame® (MLF)
Company: Amkor Technology, Inc.

Amkor's MicroLeadFrame® (QFN - Quad Flat No-Lead package) is a near CSP plastic encapsulated package with a copper leadframe substrate. This package uses perimeter lands on the bottom of the package to provide electrical contact to the PWB.

Product Name: PBGA
Company: Amkor Technology, Inc.

Amkor's PBGAs incorporate the most advanced assembly processes and designs for today's and tomorrow's cost/performance applications. This advanced IC package technology allows application and design engineers to optimize innovations while maximizing the performance characteristics of semiconductors.

Product Name: PDIP / SPDIP
Company: Amkor Technology, Inc.

Amkor is committed to continuing to service this long established standard industry package. The Amkor PDIP comes in a wide range of lead counts: from 8 - 48 leads with a lead pitch of 100 mils.

Product Name: PowerSOP® 2 & 3 (PSOP / PSSOP)
Company: Amkor Technology, Inc.

This Amkor-developed family of power IC packages significantly increases the thermal efficiency of power constrained standard SOIC packages. The PowerSOP (PSOP) improves Theta JA up to 50% over a standard SOIC thereby expanding the margin of operating parameters.

Product Name: PSvfBGA
Company: Amkor Technology, Inc.

After 3 years of development in package stacking technology and infrastructure, Amkor launched the multiple award winning PSvfBGA (base PoP) platform during the 4th quarter of 2004. The next two years saw many new milestones, from publication of JEDEC mechanical and electrical standards to a range of new customers and applications adopting PoP.

Product Name: SOT-23 / SC-70
Company: Amkor Technology, Inc.

Amkor’s 1.0 mm thick, 5, 6, and 8 lead SOT23 and 5 and 6 lead SC70 packages offer gullwing lead, sub-miniature, SMT performance characteristics. These packages are high-density leadframe (HDLF) strip-assembled in densities up to 400 units per strip and are processed in an integrated line from die attach through tape and reel for maximum cost effectiveness.

Product Name: Stacked CSP
Company: Amkor Technology, Inc.

The Stacked CSP (S-CSP) family utilizes Amkor's industry leading ChipArray® Ball Grid Array (CABGA) manufacturing capabilities. This broad high volume infrastructure enables the rapid deployment of advances in die stacking technology across multiple products and factories to achieve lowest total cost requirements.

Product Name: SuperFC®
Company: Amkor Technology, Inc.

Amkor's SuperFC® is THE high performance flip chip solution. Flip chip interconnect utilizes array interconnect of die to substrate as a replacement for conventional wire bonding. This allows the entire die surface to be used for electrical connections to the substrate, exponentially increasing the I / O per unit area vs.

Product Name: TSSOP / MSOP
Company: Amkor Technology, Inc.

With the evolution of smaller, denser, faster and lighter end products, Amkor not only shrunk the SOP by decreasing the lead pitch, but also made it thin - 0.9 mm thin! Amkor invested time and research into assuring quality and reliability with advanced designs, assembly equipment/ processes and materials.

Product Name: Eye-RIS Vision System-on-Chip
Company: AnaFocus

Lince5M is a digital high-speed image sensor designed for excellent performance in a large variety of applications ranging from low-noise high-dynamic range surveillance, to high-speed high-resolution machine vision. Lince5M incorporates a high-speed 5.2Mpxl CMOS active-pixel image sensor providing global electronic shutter and High Dynamic Range (HDR) features.

Product Name: Q-Eye Image Sensor & Processor
Company: AnaFocus

The Q-Eye Image Sensor & Processor is a QCIF resolution CMOS high-speed image sensor-processor able to sense and process on-the-fly images at extreme frame rates. Q-Eye ISP delivers up to 8,000 grey-level and 40,000 binary images per second at full resolution of 144 x 144 pixels. It provides high parallelism between image sensing, pre-processing and readout. It also performs FPN correction. Q-Eye ISP supports partial scanning allowing frame rates over 65,000fps at 144 x 10 pixels.

Product Name: ADvantageDE Version 8
Company: Applied Dynamics International

Version 8 of the ADvantage Framework includes the new Windows-based ADvantageDE simulation and test development environment (DE). The new version of ADvantageDE provides a single development environment for all ADvantage simulation and test targets:

Product Name: ADvantageVI
Company: Applied Dynamics International

ADvantageVI is the point of control and the graphical user interface for all of the run-time activities. The run-time architecture includes extensive features for interacting with, visualizing, and automating simulation and test activities.

Product Name: RC Springprobes™
Company: Ardent Concepts, Inc.

Ardent Concepts Contactors and Interconnect interfaces are based on our proprietary wire form contact, the RC Springprobe™. This new technology is capable of the highest loop through bandwidth of any metal, area array contact element available and is capable of pitches down to .4mm. The RC Springprobe™ is capable of contacting many package and board designs. Test socket designs for tight pitch area array and high-node count requirements are available, and we can help you to design and build your own using RC Springprobe™ technology.

Product Name: RF QFN Test Sockets
Company: Ardent Concepts, Inc.

With RC Spring Probe™ technology, Ardent Concepts has made a quantum leap in testing connectivity. The RC Spring Probe™ architecture is designed to accommodate a variety of applications and package types. Ardent contactors are designed for high-performance over extended cycles for QFN/MLF/DFN and other package types.

Product Name: ScanWorks® Boundary Scan Diagnostic & Repair
Company: Asset Intertech, Inc.

The ScanWorks Boundary Scan Diagnostic & Repair Station has been tailored for applications where the fast isolation of faults and the identification of their causes are of paramount importance. Failed printed circuit boards coming off a manufacturing line or faulty product returned by a customer could be routed to the manufacturer's repair facility.

Product Name: ScanWorks® Boundary Scan Manufacturing Station
Company: Asset Intertech, Inc.

The ScanWorks Boundary Scan Manufacturing Station, companies can ensure a higher level of quality for their products because boundary scan gives them test coverage where physical access is not an option. And the return on investment from ScanWorks is very rapid because boundary-scan tests and programming algorithms developed during research and development can be re-used in manufacturing with no alterations.

Product Name: SCANWORKS® BOUNDARY SCAN PROGRAMMING SOFTWARE
Company: Asset Intertech, Inc.

The ScanWorks® Boundary-Scan Programming software offers a complete set of tools for in-system programming (ISP) or in-system configuration (ISC). Programming routines can be developed quickly, saving money, time and resources. And the graphical interface on ScanWorks makes the development, debug and execution of programming routines intuitive and easy.

Product Name: SCANWORKS® BOUNDARY-SCAN TEST DEVELOPMENT
Company: Asset Intertech, Inc.

The ScanWorks® Boundary-Scan Test (BST) software is part of the ScanWorks Platform for Embedded Instruments. ScanWorks BST offers a complete set of 1149.x tools for debugging, testing, and programming your boards and systems. Model based development saves money, time, and resources. All ScanWorks® tests are GUI driven, allowing you to easily understand, develop, and debug your tests.

Product Name: ScanWorks® Interconnect JTAG Development Station Bundle
Company: Asset Intertech, Inc.

With the ScanWorks Interconnect Development Station you’ll be able to quickly and easily create JTAG or boundary-scan–based tests that verify your board has been assembled correctly. As with all ScanWorks products, the Interconnect Development Station is an easy-to-use, affordable tool that quickly solves your test problems now, but has the power to solve the most difficult test problems later when they arise.

Product Name: AS8506 Battery Stack Monitor/Balancer
Company: austriamicrosystems AG

The AS8506 Cell Monitor and Cell Balancer IC enables Autonomous cell balancing, Simultaneous cell voltage comparison and Simplified readout of cells all in a robust, simple and small solution.The AS8506 features simultaneous cell voltage comparison with upper and lower threshold, active- or optionally passive cell balancing by simultaneous comparison of actual cell voltages with a target cell voltage. Cells which are below target will either cyclically receive charge packages from an isolated DCDC converter or, optionally, cells above target will cyclically be discharged by an external ­resistor through integrated switches in an autonomous way. The device can flexibly be used for battery stacks of 3 up to 7 cells. Together with autonomous monitoring and balancing this significantly reduces data communication compared to existing solutions and improves EMC robustness.

Product Name: Beyond JTAG TAP (Test Access Port) Controller
Company: Beyond Semiconductor

The Beyond Test Access Port (TAP) Controller is a fully IEEE 1149.1-2001 compatible JTAG Test Access Port (TAP) Controller. It is used for development / debugging purposes (Boundary Scan, Memory BIST and Debugging) and is as such an interface between the Boundary Scan / Memory BIST / Beyond Debug Interface Controller (which connects to the Beyond processor(s) and Beyond peripheral interface cores) and external debugger / emulator testing device (commercial or Beyonds).

Product Name: VTU (VLSI Training Unit) Board
Company: BitMapper Integration Technologies Pvt. Ltd.

VTU board provides easy to use development platform, useful to physically verify DSP algorithms or simple digital designs around different FPGA/CPLDs.

Product Name: Encounter Test Architect
Company: Cadence Design Systems, Inc.

With its power-aware, unified methodology for specifying, inserting, and verifying full-chip tests, Encounter Test Architect helps logic design teams minimize cost of test.

Product Name: Rhino
Company: CADopia Inc.

Start with a sketch, drawing, physical model, or only an idea—Rhino provides the tools to accurately model your designs ready for rendering, animation, drafting, engineering, analysis, and manufacturing.

Product Name: Corelis’ ScanExpress
Company: Corelis, Inc.

Corelis’ ScanExpress software offers you a fully integrated development environment that includes Test Program Generation and Execution, In-System Programming, and productivity enhancing utilities.

Product Name: JTAG Analyzers
Company: Corelis, Inc.

Corelis bus analyzers and exercisers offer analysis, test, and debug capabilities for product development, system integration, and manufacturing of digital boards and systems.  All of our bus analyzers are PC-based and come with a Windows based software package.

Product Name: JTAG Testing
Company: Corelis, Inc.

The expertise gained by Corelis in 13 years of active participation in the boundary-scan (JTAG) market enables us to offer an unparalleled array of boundary-scan tools, training, and consulting services to thousands of our customers around the world.

Product Name: FIBEX-Viewer
Company: CRST GmbH

The FIBEX-Viewer is a software tool to display and show car data bases in FIBEX XML format (FIBEX Version 1.1.5, 1.2.0 and 2.0.0) graphically.

Product Name: Dialogic® ControlSwitch™ System
Company: Dialogic

The Dialogic® ControlSwitch™ System is an IP softswitch that provides a smooth migration path from existing TDM voice networks to the Next Generation Network/IP Multimedia Subsystem (NGN/IMS) by enabling the interconnection of a mix of traditional and IP-based voice networks. The ControlSwitch System is built around an advanced modular, programmable, distributed, highly scalable, and high availability architecture with open interfaces to media devices, application servers, and back-office systems.

Product Name: PXI XJLink2
Company: Embedded JTAG Toolsmiths

The PXI XJLink2 modules allow the integration of XJTAG into PXI-based test systems. PXI XJLink2 has one JTAG controller and PXI XJLink2 Duo has two JTAG controllers. Each controller has 4 TAPs, which are configurable for pinout and voltage. PXI XJLink2 modules are easily integrated with LabVIEW™ with a full set of Virtual Instruments (VIs) included.

Product Name: HFWorks
Company: EMWORKS

HFWorks is a fully 3-Dimensional field simulator for RF/Microwave and Wireless applications, based on the powerful finite element method. Currently, it is the only high frequency electromagnetic Add-in to SolidWorks®, the #1 CAD package.

Product Name: ES4001
Company: Esencia Technologies

The es4001 AES core implements the Advanced Encryption Standard (Rijndael Algorithm FIPS 197) encoder and decoder. The core encrypts and decrypts in blocks of 128 bits. It supports key length of 128, 192 and 256.   

Product Name: SoCDesigner
Company: Eureka Technology, Inc.

SoCDesigner is a free web-based interactive software that allows our customers to customize their SoC designs according to their exact specifications. The SoCDesigner software builds customized SoC by integrating pre-verified modules from our rich repertorie of silicon proven IP cores. Multiple options can be selected from each module to fit the requirements and each module can be enabled or disabled according to needs.

Product Name: onTAP Development
Company: Flynn Systems Corp.

The onTAP Development System includes all of the necessary JTAG software tools you need to develop and run comprehensive and reliable onTAP tests, delivering robust JTAG solutions. With over 2 dozen CAD netlist readers, a built-in netlist merge tool, and ProScan - the graphical boundary scan test debug environment - the onTAP Development system will speed up your project development time, and keep costs under control.

Product Name: onTAP Manufacturing (MTO)
Company: Flynn Systems Corp.

Designed specifically for manufacturing test environments, the onTAP Manufacturing Test Only (MTO) System is the ideal complement to the onTAP Development System.  The MTO restricts access to test development and test files, yet enables users to run any predeveloped onTAP boundary scan / JTAG tests, including memory cluster tests and Flash programming, when activated.

Product Name: onTAP ProScan
Company: Flynn Systems Corp.

ProScan is Flynn Systems’ proprietary, graphical debug environment that increases visibility to your JTAG tests.  ProScan is a standard feature on the Development and MTO systems. The diagnostic messages pinpoint failures, and direct you to the failing pins in the graphical screen.

Product Name: i.MX Applications Processors
Company: Freescale Semiconductor Inc.

Based on ARM® core technology and designed for use in smartphones, wireless PDAs, mobile entertainment and many other mobile wireless applications, Freescale's i.MX family is engineered to offer smart speed—low power consumption with MHz performance to spare, and a high degree of integration to reduce your design time significantly. Board support packages are available for a broad range of popular operating systems.

Product Name: PACSystems* RX7i Controller
Company: GE Fanuc Embedded Systems, Inc.

Performance – Delivering on the Demands of Your Most Advanced Applications • Pentium® CPUs for your every need, from Celeron 300Mhz to M Class 1.8Ghz
• VME64 Backplane provides up to four times the bandwidth of existing Series 90*-70 systems
• 10/100 Ethernet built into the CPU, with easy cabling RJ-45 dual ports connected through an auto-sensing switch — no need for additional switches or hubs rack to rack
• Up to 64MB memory for fast execution, storage of the complete program with all documentation (including Excel, Word, PDF and DXF files) — all in one CPU

Product Name: GL9711
Company: Genesys Logic, Inc.

The GL9711 is a 1-lane PCI Express PHY Layer Controller, which is compliant with PCI Express Base Specification rev. 1.0a and Intel's PHY Interface for the PCI Express Architecture rev. 1.0. It integrates one SerDes and the Physical Coding Sublayer (PCS) which performs 8b/10b encoding and decoding, elastic buffer and receiver detection, data serialization and deserialization. The SerDes in the GL9711 supports an effective serial interface speed (2.5 Gb/s) of data bandwidth, intended for use in ultrahigh-speed bi-directional data transmission system. The GL9711 can also be externally configured for various parallel bus width which is flexible and suitable for implementation.

Product Name: GigaTest 4040 Precision Probing Platform
Company: GigaTest Labs

The GTL4040 is a very popular system designed for single sided measurements on small and medium sized test boards as well as sockets, connectors and device packages.  

Product Name: GigaTest 4060 Large Area Probing Platform
Company: GigaTest Labs

The GTL4060 is similar in design to the GTL4040 but provides a larger test platform to accommodate medium to large size test boards but still offering the ability to work on smaller boards, sockets, connectors and sub-assemblies.  

Product Name: GigaTest 5050 Rotation Probing Platform
Company: GigaTest Labs

The GTL5050 was designed to address the difficult task of 2 sided probing. Instead of trying to probe with a board mounted vertically. The GTL5050 is constructed in such a way that it is actually 2 probe stations in one. A topside Probe station and a bottom side probe station with the unique ability to rotate the entire probe station 180 degrees allowing quick setup and pre-configuration of the probes and test structures on both the top and bottom. Bottom side adjustments are easily made using Joystick controlled motorized positioners.  

Product Name: GigaTest 9500 Custom Probing Platform
Company: GigaTest Labs

The GTL9500 is designed for those test applications requiring single sided probing on large or multiple test boards.  

Product Name: S7000 DVB-RCS2 Compliant Turbo Code Code Decoder Core
Company: iCODING Technology Incorporated

The S7000 Turbo Code decoder core is a high speed decoder capable of decoding the 16 state parallel concatenated convolutional  Turbo Code specified by the second-generation DVB-RCS2 standard. The decoder  uses multiple parallel MAP decoders to process 4-8 bits per clock cycle with a minimum amount of overhead per iteration.

Product Name: ClockExplorer
Company: ICScape Inc.

ClockExplorer is a comprehensive clock design environment which has major features: ClockAnalyzer is for clock structure analysis and constraint generation. Its functionalities include clock schematic creation, structure analysis, constraint verification, clock constraint generation, and design constraint merging.

Product Name: ICExplorer
Company: ICScape Inc.

ICExplorer is the desired design analysis and optimization platform. Its analysis is accurate and its optimization is vertical thus it provides high QOR

Product Name: RCExplorer
Company: ICScape Inc.

RCExplorer is a parasitic Extraction tool for Early-Stage and Post-Layout Simulation.Timing, signal integrity and power are becoming more challenging in multi-million gate designs, especially at 130nm node and below. RCExplorer can be a cell-level extraction tool for nanometer-scale standard cell designs. RCExplorer can also be transistor-level extraction with interface to 3rd part LVS tool, like Calibre.

Product Name: Eclipse™ Product Family
Company: Intellitech Corp

Intellitech’s Eclipse™ Family of Products is a Complete Solution for Design Debug, In-system Device Configuration and Automated Test Program Development for Complex PCBs and Systems. The Eclipse Family provides design and test engineers with a comprehensive set of tools that they can use to create, validate and apply 1149.1 (JTAG) based system configuration and test suites. All tests can be passed to SystemBIST for embedded test, to Teradyne ICT or to Intellitech manufacturing systems. The Eclipse family has an extensive line of ultra fast hardware and integrated software options for 1149.1 (JTAG) test and configuration.

Product Name: TEST-IP Family
Company: Intellitech Corp

The TEST-IP Family is patent-pending infrastructure Intellectual Property. The IP is embedded into a design to provide a scalable and unified configuration and test methodology, which enables design teams to produce high-quality self-testable and in-the-field re-configurable products.

Product Name: JMF606
Company: JMicron Technology Corp.

JMF606 is a single chip, supports SATA III to NAND flash interface. It is native design to provide higher bandwidth for flash memory access. JMF606 can support the maximum read and write speed to drive the limit of flash memory. JMF606 has the best supporting to the latest NAND flash memory, including Toshiba 19nm and Micron 20nm Flash. It also provides the embedded hardware error correction code (ECC), wear leveling, and bad block management technology in this chip. In order to resolve compatibility issue, JMF606 provides the on line firmware upgrade ability.

Product Name: Quality Review
Company: LDRA

The LDRA tool suite automatically determines the complexity and density of your source code. LDRA goes beyond common complexity metrics to determine “essential complexity”, or the section of your code which requires refactoring.

Product Name: Test Verification
Company: LDRA

Test Verification can be used by the Unit Test component to provide coverage metrics for test cases that execute at various levels, including function/method, module/class and component/system levels.

Product Name: SATA (Serial ATA)
Company: LeCroy Corporation

Avalanche™ SATA Protocol Analyzer
The Avalanche SATA analyzer is LeCroy's next generation system that decodes 6Gbps, 3Gbps and 1.5Gbps Serial ATA (SATA) traffic. Avalanche runs the SATASuite™ application. Powerful post-processing reporting and search tools allow users to find errors and their causes very quickly.

Product Name: LPKF CircuitPro
Company: LPKF Laser & Electronics, North America

LPKF CircuitPro will import all data exchange formats, offers extensive editing options and controls the circuit board plotters. In addition the software produces stencils for solder resist masks and assembly prints. LPKF CircuitPro Lite is a simpler version of LPKF CircuitPro for entry level LPKF circuit board plotters.

Product Name: LED Displays
Company: LSI Logic Corporation

Avago Technologies offers a wide selection of LED Displays designed to meet a variety of applications and requirements. With our innovative LED Displays customers can choose products with rich color capabilities, low cost, standard brightness and high ambient light. 

Product Name: TestKompress
Company: Mentor Graphics

As process technologies migrate to sub- 100 nanometer, high quality test is a keyfactor for maintaining low defect rates. The TestKompress® product uses patented Embedded Deterministic Test (EDT™) technology to dramatically reduce the amount of test data required for today’s complex integrated circuits (ICs) while maintaining test quality. With up to a 100X reduction in test data volume and test time, compared to state-of-the-art scan and automatic test pattern generation (ATPG) methodologies, semiconductor manufacturers can dramatically increase the quantity and quality of tests they perform while controlling costs.

Product Name: IP-101 I2C
Company: Micro Computer Control Corporation

The IP-101 I2C Prototyping Board provides an excellent platform for experimenting with the I2C Bus and developing I2C circuits.

Product Name: FLCOS Microdisplays
Company: Micron Technology, Inc.

Based on proprietary FLCOS technology, our Displaytech microdisplay panels and modules offer the most compelling combination of clarity, brightness, and color fidelity for mobile display applications like camera viewfinders, heads-up displays, and pico projectors.

Product Name: MLDesigner
Company: MLDesign Technologies, Inc.

MLDesigner is an integrated platform for modelling and analyzing the architecture, function and performance of high level system designs - either as a standalone system or as a system operating in the context of larger systems and scenarios (i.e., missions).

Product Name: 10 Gigabit Ethernet 10GBase-R PCS Core
Company: MorethanIP

Initially, 10 Gigabit Ethernet (10 GbE) is used by network managers to provide high-speed, local backbone interconnection between large-capacity switches, as it enables Internet Service Providers (ISPs) and Network Service Providers (NSPs) to create very high-speed links at a very low cost, between co-located, carrier-class switches and routers. Now, the technology also allows the construction of MANs and WANs, which connect geographically, dispersed LANs between campuses or points of presence (PoPs). These networks use dark fiber, dark wavelengths, or SONET (synchronous optical network) connections. 10 Gigabit Ethernet (10 GbE) provides compatibility with the installed OC-192 SONET rings for MAN and WAN.

Product Name: DIAdem
Company: National Instruments Corp.

National Instruments DIAdem is software for managing, analyzing, and reporting data collected during data acquisition and/or generated during simulations. NI DIAdem is designed for quick access to large volumes of scattered data, consistent reporting, and data visualization. The DIAdem DataFinder, which is optimized for managing data from multiple sources and different formats, helps you correlate data based on its descriptive attributes - functionality previously reserved for only those with a customized data management system.

Product Name: NI LabVIEW
Company: National Instruments Corp.

NI LabVIEW graphical development has revolutionized the development of scalable test, measurement, and control applications. Regardless of experience, engineers and scientists can rapidly and cost-effectively interface with measurement and control hardware, analyze data, share results, and distribute systems.

Product Name: NI LabWindows™/CVI
Company: National Instruments Corp.

LabWindows/CVI is a proven ANSI C integrated development environment that provides engineers and scientists with a comprehensive set of programming tools for creating test and control applications. LabWindows/CVI combines the longevity and reusability of ANSI C with engineering-specific functionality designed for instrument control, data acquisition, analysis, and user interface development.

Product Name: NI Measurement Studio
Company: National Instruments Corp.

Measurement Studio is an integrated suite of classes and controls for test, measurement, and automation applications in Microsoft Visual Studio 2008/2005/.NET 2003 and Visual Studio 6.0. Measurement Studio dramatically reduces application development time by providing Windows Forms, Web Forms, and ActiveX user interface components designed for engineers, advanced scientific analysis, and data acquisition and instrument control assistants optimized for test.

Product Name: NI TestStand
Company: National Instruments Corp.

NI TestStand is a ready-to-run test management environment for automating your test and validation systems. NI TestStand is used to develop, manage and execute sequences, which integrate test modules written in any programming language, and specify sequence flow, reporting, database logging and connectivity to other enterprise systems. NI TestStand is designed to maximize test-code reuse through built-in language adapters and simplify maintenance by using a modular fully customizable test-system framework.

Product Name: System Test Access IEEE 1149 (JTAG)
Company: National Semiconductor

SCANSTA products provide support for a system or card-level IEEE 1149.1 (JTAG) bus architecture. The JTAG mux is used for multiplexing and managing multiple JTAG chains, while the embedded master simplifies connecting the JTAG bus to a microprocessor bus.

Product Name: Bill of Material (BOM) Management
Company: Omnify Software

Managing the Bill of Material (BOM) is a key component in managing the definition of a product. An inaccurate or incomplete BOM can cause lost weeks in a schedule and result in wasted production runs.

Product Name: Luna® PCI 7000
Company: SafeNet, Inc.

Luna PCI 7000 is the fastest, most secure, cryptographic PCI accelerator card in the industry, and is widely used by major governments, financial institutions and large enterprises around the world. The PCI -X, and PCI express bus on Luna PCI 7000 easily plugs into the host computer and provides reliable protection for data, applications, and digital identities to reduce risk and ensure regulatory compliance.

Product Name: Teraptor
Company: SANKHYA Technologies

Teraptor helps in creating the next generation of low power and high performance programmable application specific processors and systems. Teraptor can significantly improve productivity and bring scalability to product development processes. Realize business benefits within weeks of adding Teraptor to your strategy.

Product Name: LAVIS
Company: Shearwater, Inc.

The advent of sub-wavelength process has resulted in the growing tendency of ever larger LSI design data and a more complex design flow. Besides that, considering manufacturing process in design phase, DFM/RET is a demand to improve product quality and reduce time to market. Thus, a versatile standard layout platform that can be utilized throughout the design process is strongly desired.

Product Name: Tester to Tester
Company: Simutest Inc.

Semiconductor production test environment often needs to migrate test programs from one test system to another for capacity and/or obsolescence reasons. The T2T is a conversion program that converts existing test programs from one test system into the test language of the target test system.

Product Name: TP-Builder
Company: Simutest Inc.

The TP-Builder is a custom software framework for automating the process of development of complete test programs for the production test systems for a set of structured digital devices. The TP-builder framework integrates the vector conversion with the parametric DC tests thus creating standardized production test programs in a matter of minutes instead of days.

Product Name: DTS-CommunicationServer
Company: Softing AG

Diagnostics is often the only possibility of reading out ECU details in the Test, Manufacturing and Service areas.

Product Name: EDICblue
Company: Softing AG

Applications in all areas of ECU communication require efficient, easy-to-use and reasonably-priced interfaces to the vehicle electronics. Thanks to its Bluetooth® interface and the new compact housing concept with an integrated diagnostic connector, EDICblue is perfect for use in the Test Drive, Manufacturing and Service sectors.

Product Name: TestCASE1 – Test Automation Software
Company: Softing AG

This solution is used for the systematic and automatic testing of embedded systems in the automotive sector (ECUs, subsystems and vehicles), and helps you to design, realize, run and create intuitive test reports.

Product Name: TestCUBE – The ECU Simulation
Company: Softing AG

An ECU is required as a suitable counterpart to create test sequences as part of a test process. It is often the case that this counterpart is not yet available or no longer available when realizing development testers, with production systems and service testers.

Product Name: PVT+ Package
Company: Solido Design Automation Inc.

The Solido PVT+ package is a complete design debug and verification solution for corner-driven custom IC design. The package of applications provides everything designers need to quickly and comprehensively examine the whole PVT space, to extract the design-specific worst-case PVT corners, to identify PVT variation problems in the design, and to fix PVT variation problems effectively. PVT+ includes Fast PVT technology to minimize the number of simulations while accurately and comprehensively covering the full PVT space.

Product Name: SymTA/S ECU
Company: Symtavision GmbH

Electronic control units (ECUs) typically execute hundreds of software functions and tasks under the control of a real-time operating system (RTOS). Understanding worst-case timing under all relevant conditions is of paramount importance to detect performance bottlenecks, verify deadlines and other timing constraints, and to optimize ECU scheduling.

Product Name: DFT-PRO Plus
Company: SynTest Technologies, Inc.

DFT-PRO Plus ™ offers an integrated DFT solution covering scan synthesis and ATPG, memory Built-In Self-Test (BIST) synthesis and boundaryscan (BSD) synthesis. The corresponding tools generate RTL blocks that fit seamlessly into an existing synthesis flow.

Product Name: TurboBIST-Logic
Company: SynTest Technologies, Inc.

TurboBIST™ family of products from SynTest Technologies, Inc. includes tools for logic (TurboBIST™ - Logic) and memory (TurboBIST™ - Memory) (SRAM, ROM, DRAM and CAM) built-in self-test. These tools synthesize the BIST logic surrounding functional logic and memory blocks, inc

Product Name: TurboBIST-Memory
Company: SynTest Technologies, Inc.

The TurboBIST-Memory family of products from SynTest Technologies, Inc., includes tools for adding highly efficient BIST structures to all types of embedded memories including SRAMs, ROMs, SDRAMs and CAMs.

Product Name: TurboBSD
Company: SynTest Technologies, Inc.

TurboBSD is a high performance boundary scan design suite that makes boundary scan design a fast and straightforward process. It synthesizes boundary scan cells, the TAP controller and instruction registers.

Product Name: TurboCheck
Company: SynTest Technologies, Inc.

SynTest offers two versions of TurboCheck – TurboCheck- RTL™ and TurboCheck-Gate™ – to support different levels of checking throughout the design cycle. With TurboCheck-RTL, designers can very quickly identify testability problems at the earliest stages of the design cycle, even before the often time-consuming logic synthesis process.

Product Name: TurboDFT
Company: SynTest Technologies, Inc.

TurboDFT contains a suite of very useful and powerful DFT integration tools. TurboDFT allows users to automatically integrate and stitch DFT cores, whether they are created using DFT tools from SynTest or other vendors.

Product Name: TurboFault
Company: SynTest Technologies, Inc.

TurboFault™ combines high performance, versatility and accuracy. It is highly competitive with hardware accelerators for classical test fault grading. It supports synchronous and asynchronous designs at the gate level, including tri-state gates, latches, flip-flops, single and multi-port RAMs, complex bus resolution functions, and User Defined Primitives (UDPs).

Product Name: VirtualScan
Company: SynTest Technologies, Inc.

VirtualScan™ is SynTest's solution to combat this increase in test data volume and test cycle volume. With VirtualScan™ an extremely large number of short scan chains within the SOC can be virtually accessed from outside the chip with a limited number of pins assigned as scan pins.

Product Name: Diatem Industrialization station
Company: TEMENTO Systems

DiaTem StudioTM is a cost effective manufacturing test platform dedicated to Printed Circuit Board (PCB) test in a production environment. DiaTem StudioTM is composed of 4 stations, the engineering station, the industrialization station, the production station and the repair and maintenance station.

Product Name: Tensilica Inc.
Company: TES Electronic System Solutions Ltd.

The TS-VCO-60 is a MMIC voltage controlled oscillator intended for use in 60 GHz applications. Differential 100 Ω outputs can directly drive the mixer, without the need for a balun. Wide Modulation Bandwidth of 1 GHz enables the use as a FM modulator. Power consumption of only 72 mW makes it an ideal candidate for battery operated devices. Electrical

Product Name: Digital Virtual Tester
Company: Test Systems Strategies, Inc. (TSSI)

Now you don’t have to wait for the physical device to start testing. DVT harnesses the power of electronic design simulation using powerful software models of the target tester. Design and test engineers can verify the test database with the design model in the simulation environment at their workstation

Product Name: Test Development Series
Company: Test Systems Strategies, Inc. (TSSI)

Built on a legacy of success, TDS significantly reduces engineering time and costs by generating test programs from popular simulator and ATPG/scan tool outputs. That’s why TDS is the tool of choice for semiconductor testing and used by more than 400 of the world’s top electronics firms.

Product Name: RFID Systems
Company: Texas Instruments Inc.

TI is the world's largest integrated supplier in radio frequency identification (RFID), with over 500 million TI-RFid tags, smart labels, and RFID readers manufactured for use in asset tracking, contactless payments and secure ID applications.

Product Name: Wind River Test Management
Company: Tilcon Software (acquired by Wind River)

As device software complexity grows and test cycles shrink, the risk of untested code resulting in defects in the field increases every day.

Product Name: LDPC decoder for 802.11ac/n
Company: TurboBest

The IEEE 802.11ac/n LDPC Decoder Core performs iterative decoding of channel data that has been encoded as described in the IEEE Std 802.11ac and 802.11n standard.

Product Name: AVOProbe
Company: Unique ICs

AVOProbe is a specialized full functional postprocessor for viewing and processing simulation results. With AVOProbe it is very convenient to analyze simulation results, it has friendly interface.

Product Name: vPlan
Company: Valor Computerized Systems, Ltd.(acquired by Mentor Graphics)

vPlan is Valor's next-generation, enterprise-level process engineering solution for electronics assembly. Aimed at manufacturers needing to reduce costs and gain more capacity from current assets, Valor delivers a revolutionary solution for synchronized process engineering in an easy to use package. With vPlan, electronics companies can achieve a quantum leap in efficiency and productivity for their PCB assembly operations, in today’s highly dynamic manufacturing environment.

Product Name: VectorCAST/Ada
Company: Vector Software, Inc.

VectorCAST/Ada is an integrated software test solution that significantly reduces the time, effort, and cost associated with testing Ada software components necessary for validating safety- and mission-critical embedded systems.

Product Name: VectorCAST/Cover
Company: Vector Software, Inc.

VectorCAST/Cover allows you to gauge the effectiveness of your test efforts by identifying which areas of an application were exercised during a test run. VectorCAST/Cover provides a convenient way to analyze the completeness of your system tests, ensuring that applications are not released with untested code. VectorCAST/Cover allows you to analyze any portion of your application, or the entire application at once.

Product Name: VS1000 Developer Board
Company: VLSI Solution Oy

VS1000 Developer Board is an application developing board for VS1000. It features all necessary hardware for writing and testing software on VS1000. The board has headphone, USB and serial port connectors. The board also features an OLED display, a prototyping area and pinheader for measurements and interfacing other boards.

Product Name: XJDeveloper
Company: XJTAG

XJDeveloper is a graphical application that allows you to quickly and easily set up and run tests on your circuit. With XJDeveloper you can reduce your time to market by reusing your test scripts all the way through the product design process and then in manufacturing.

Product Name: XJRunner
Company: XJTAG

XJRunner is the specialised run-time environment for executing XJEase tests. With a range of special features it is particularly aimed at board manufacturers and in-field testing.

Product Name: faultRobust
Company: YOGITECH

It provides a set of IPs, tools and methodologies for the detection and correction of faults affecting the different parts of the electronic equipment or SOC. Each fRIP can be stand-alone, protecting a particular component such as CPU, memory system and peripherals, or it can be combined with other fRIPs for a complete solution.

ASIC and IC Design : Design Libraries

Product Name: Liberate
Company: Altos Design Automation Inc. (Acquired by Cadence)

Liberate is an ultra-fast standard cell and I/O library creator. It generates electrical cell views for timing, power and signal integrity including advanced current source models (CCS and ECSM). It uses a unique “inside view” approach where each cell undergoes a pre-characterization circuit analysis that determines all the necessary stimulus and internal logic states to ensure a complete, accurate and highly efficient characterization of that cell.

Product Name: Liberate LV
Company: Altos Design Automation Inc. (Acquired by Cadence)

Liberate LV provides a collection of utilities for validating libraries including functional equivalence checking, data consistency checking, revision analysis and correlation with various electrical analysis tools for timing (including statistical timing), noise and power. Using Liberate LV a complete validation of a library can be completed overnight on a small number of multi-core computers. For library providers, this assures the library quality before the library is shipped.

Product Name: Liberate MX
Company: Altos Design Automation Inc. (Acquired by Cadence)

Liberate MX extends Altos’ ultra-fast standard cell and I/O library characterization capabilities to cover larger macro blocks such as memory, mixed signal and custom digital cores. Macro blocks require additional pre-analysis steps in order to make fast and accurate characterization feasible. Leveraging a network of distributed CPUs and utilizing Altos’ unique “inside view” technology for optimizing characterization runtime, memories and cores can be characterized quickly and easily with the same accuracy and methods as standard cells, including the generation of timing constraints and modeling of current source models for timing and noise.

Product Name: SiCanvas's Laker-AMS
Company: Analogue Integration Ltd

SiCanvas's Laker-AMS Schematic Capture Software  for IC design allows designers to develop and manage projects of growing complexities. As an individual contributor or manager of a design team, you can define and manage your overall specification and design implementation with hierarchical modules. Laker-AMS has been developed to allow you to leverage the design methods that best meet your needs, and to support topdown design techniques that are increasingly required to shorten design cycles.

Product Name: Nand Flash Controller
Company: Barco

The BA315A is a configurable Single-Port AHB Nand-Flash Controller developed, validated & licensed by BARCO-Silex. It supports both SLC & MLC Nand-Flash memory devices in 8-bit or 16-bit configuration.

Product Name: BADGE
Company: BitSim AB

BADGE – BitSim’s Accelerated Display Graphics Engine IP block for ASIC & FPGA, is an advanced graphic controller. It is an adaptable IP-block for ASIC and FPGA.

Product Name: CADopia Standard Edition
Company: CADopia Inc.

CADopia 11 Standard Edition, is an ideal tool for engineers, architects, and others who need comprehensive drafting features, but do not need advanced features; such as photo realistic rendering, solid modelling, and programming features.

Product Name: MEMS ANALYSIS (CoventorWare)
Company: Coventor

MEMS devices are designed to take advantage of many mutli-physical phenomena. CoventorWare is a comprehensive suite of software tools for MEMS design and product development that lets you simulate the physcial coupled fields of MEMS devices. With CoventorWare, MEMS developers can quickly and easily design new devices, adapt designs to different requirements and study the impact on yield.

Product Name: INDX
Company: Intercept Technology Inc.

The Library Management product line enables "plug & play"by way of Intercept's existing library translator suite for importing Mentor Graphics, VeriBest, and Viewlogic library formats. A powerful conversion engine supports import of an entire third party vendor library, and through the documented ESPEC plus Symbol and Geometry Generators, enables businesses to transition multiple libraries to a common format which reflects a CONSISTENT standard for symbols, geometries, and part map descriptions

Product Name: INTERFACES
Company: Intercept Technology Inc.

Intercept understands the various requirements a typical design process may use to reach production. To this end, we offer many interfaces to keep the design process flexible and easy. If an interface is not currently available for a particular software package, Intercept can quickly develop additional interface software to meet your design needs.

Product Name: PowerTeam
Company: Library Technologies, Inc.

PowerTeam is a dynamic power simulator. It is integrated with Verilog and provides power simulation and analysis capabilities to Verilog on top of Verilog's functional and timing simulation capabilities. Interface to Verilog is through PLI. Verilog-XL and VCS are supported. In addition to PLI interface, power simulation requires a power library which describes different power dissipation modes of the library elements. Various power dissipation parameters are also contained in this library.

Product Name: SolutionWare
Company: Library Technologies, Inc.

Solutionware library generation tools offer the most comprehensive set of tools for characterization and model generation. They are optimized for speed and efficiency. They can cover even non-standard cells like one-hot muxes, semi-synchronous flops, synchronizers, clock gating cells, dynamic flops and dual edge flops, and even cells which mux between flip-flop and latch behavior. Characterization time for a flip-flop could be as small as 2 minutes for 7x7 tables generated without interpolation.

Product Name: UnBlock and RcBack
Company: Library Technologies, Inc.

UnBlock is a library generator for Structured Custom Layout Blocks. These blocks are usually handcrafted, don't use an ASIC library, and usually take advantage of circuit and layout techniques which are normally avoided in standard cell designs. The main problem with these blocks is the difficulty of functional and timing verification. Transistor level timing and functional simulators are the only available tools designers can rely on.

Product Name: LDRAcover
Company: Logic Technology BV

For more than 40 years, LDRA has developed and driven the market for software that automates code analysis and software testing for safety-, mission-, security- and business-critical markets. Working with clients to achieve early error identification and full compliance with industry standards, LDRA traces requirements through static and dynamic analysis to unit testing and verification for a wide variety of hardware and software platforms.

Product Name: Tessent BoundaryScan
Company: Mentor Graphics

The boundary scan logic can be accessed throughout the life of the IC, including manufacturing test at all package levels, silicon debug, and system verification. The result is both I/O cell defects and inter-IC board interconnect problems are detected before shipment, reducing field support costs and increasing customer satisfaction.

Product Name: The best solutions for audio / video products
Company: NXP Semiconductors

Choose the best solution from a multitude of audio / video products, ideal for automotive and consumer applications. Our broad portfolio includes everything from display amplifiers to decoders, with video and radio processors.

Product Name: AMBA 2.0 Infrastructure "Fabric" IP Library
Company: SoC Solutions

The PIP-AMBA provides the essential SPIRIT IP-XACT compliant  "Fabric" IP cores and infrastructure needed for systems using a microprocessor with the AMBA 2.0 bus system, a de facto, open standard. Ready for software development out of the box but also easy to customize and extend, it serves as a basic platform for the rapid development of a variety of system-on-chip (SOC) applications. The platform is well suited to a variety of AMBA-based SoC designs. It includes the features of the high-performance AHB bus, and a bridge to the slower APB peripherals bus. The architecture makes it straightforward to add additional IP cores or custom logic to either bus. The platform includes synthesizable HDL cores for the AHB and APB buses, plus various timers, controllers, interface functions, communications functions, and an internal SRAM block. (FPGA netlist versions are also available.) Generous standard deliverables include device drivers, boot code, and support for an embedded real-time operating system (RTOS).

Product Name: S3220
Company: Sonics, Inc.

Sonics3220 SMART Interconnect solution is a  non-blocking peripheral interconnect that guarantees end-to-end performance by managing data, control and test flows between all connected cores.

Product Name: 3D Planar High-Frequency Electromagnetic Software
Company: Sonnet Software, Inc.

Sonnet's suites of high-frequency electromagnetic (EM) Software are aimed at today's demanding design challenges involving predominantly planar (3D planar) circuits and antennas. Predominantly planar circuits include microstrip, stripline, coplanar waveguide, PCB (single and multiple layers) and combinations with vias, vertical metal sheets (z-directed strips), and any number of layers of metal traces embedded in stratified dielectric material.

Product Name: Fan Display System
Company: Sri Veda EmSys Solutions Pvt. Ltd.

This electronic device can be attached to any rotating device (Residential Fans, Industrial fans, Wind mills etc.) to display a programmed message.  The display message can be programmed remotely. The device will receive the message via wireless dongle or using a mobile and the display will be updated on the fly.

Product Name: Parking Lot Management System
Company: Sri Veda EmSys Solutions Pvt. Ltd.

  • This innovative intelligent system will help a driver quickly identify an empty slot for parking his car.
  • This intelligent system works on a 3 pronged approach
  1. Sensors in each parking space
  2. Repeaters to transmit the signal from the individual parking slots to the central monitor.
  3. A central monitor which will display the availability of parking space in each floor.
This system will drastically cut the time spent by a driver looking for a parking space, reduce the fuel burnt by each car and cut down fuel emissions leading to a clean environment.

Product Name: Restaurant Ordering System
Company: Sri Veda EmSys Solutions Pvt. Ltd.

  • This revolutionary ordering system will help restaurants increase the efficiency of their operations and reduce the time gap between the order placed and order executed.
  • This ordering system works on tetra cyclic pattern:
  1. Orders will be taken by a handheld device
  2. Repeaters transmit the orders
  3. An LCD monitor will display the order in the kitchen or it can generate a printout.
  4. A Central System will store all the order information and can generate variety of reports including the order bill printout. These reports will serve as a snap shot of the current business status and will assist the management in making  strategic decisions. Management can easily monitor the cash-flow!

Product Name: Wireless RF Automotive Interface for Automotive Diagnostic Tools
Company: Sri Veda EmSys Solutions Pvt. Ltd.

  • This interface eliminates the need of Automotive  diagnostic tools to be wired to the PC.
  • Legacy diagnostic tools can be hooked up to this device and the application can communicate to the Engine wirelessly via the diagnostic tool.
  • Solves the problem of technicians sweating out/ shivering in Garages in extreme weather conditions for collecting diagnostic data from vehicles.

Product Name: SymTA/S System
Company: Symtavision GmbH

Combining ECU and network scheduling analysis creates new, powerful tools for optimized system integration. Dependencies between ECU scheduling, network scheduling and COM-layer configuration can be analyzed to verify local and end-to-end deadlines, to identify bottlenecks, and to explore and optimize ECU scheduling, bus protocols and their configuration, buffering  and synchronization on nodes and gateways, and other relevant parameters.

Product Name: Symtavision TraceAnalyzer
Company: Symtavision GmbH

The Symtavision TraceAnalyzer enables engineers to visualize and analyze the timing of controllers and buses, find the cause of timing problems and create timing models for SymTA/S. Understanding system timing and performance are key challenges when testing real-time systems. Tracing is regularly applied today to log the timing of relevant events. A challenge is to efficiently analyze such trace data and quickly identify timing problems and their root causes.

Product Name: FlexPIC16
Company: Technology Bazaar Ltd

FlexPIC16 is a fully configurable, efficient and high performance, technology and vendor independent 8-bit microcontroller supplied as a synthesisable IP core. It is software compatible with the industry standard PIC16xxxx family of 8-bit PIC ® microcontrollers.

Product Name: iPOS3602 and iPOS3604 Intelligent Drives
Company: TECHNOSOFT

The iPOS line of drives is based on a new design concept that has resulted in cost-effective, compact, modular solutions for the control of rotary or linear brushless, DC brush, and step motors of powers of up to 144 W, with 36 V nominal voltage.

Modularly designed to cover from low-volume to high-volume applications, iPOS3602 and iPOS3604 integrate all the basic motor control functions and motion control features on a single plug-in module. A series of I/O signals, both digital and analog, are available for easy interfacing with the application.

Product Name: TSMC PowerTrim™ Service
Company: Tela Innovations

The TSMC PowerTrim Service takes advantage of the exponential relationship between gate length and source drain leakage enabling small increases or biases in gate length to significantly reduce leakage power. Give that Ion has a linear relationship with gate length and is proportional to speed, these small biases in gate length have minimal impact on a designs performance and can be applied to transistors that are not on timing critical paths.

Product Name: Think2D Bitmap Graphics Engine
Company: Think Silicon Ltd

The Think2D Graphics Accelerator Engine is a Graphics subsystem IP Core for SoC and Mobile Devices for the acceleration of 2D content. It is a very powerful accelerator, capable of targeting multiple types of surfaces, seemlessly move raster images, accelerate drawing of lines and filled boxes and perform alpha blending in all target modes.

Product Name: ThinkVG 2.5D Vector Graphics Engine
Company: Think Silicon Ltd

Think Silicon is currently developing a 2.5D Vector Graphics Accelerator Engine for use in SoC devices targeting the low power Mobile Informantion Device Market. The product is being developed to support OpenVG and provide a compact and low power solution for device that require fast 2D Vector Rasterization.

Product Name: Wind River Hypervisor
Company: Tilcon Software (acquired by Wind River)

Wind River Hypervisor is deterministic, event driven, small, and scalable. It provides direct access to devices and is processor, architecture, and OS agnostic. A Type 1 hypervisor, it runs directly on the hardware, with a small memory footprint. Wind River Hypervisor is custom developed with the demands of real-time and safety systems in mind.

Product Name: Wind River Simics
Company: Tilcon Software (acquired by Wind River)

Wind River Simics is a full system simulator used by software developers to simulate any target hardware from a single processor to large, complex, and connected electronic systems. This simulation enables the target software (board support package, firmware, real-time operating system, middleware, and application) to run on a virtual platform the same way it does on the physical hardware.

Product Name: Wind River VxWorks
Company: Tilcon Software (acquired by Wind River)

Innovative real-time embedded systems need a robust real-time operating system (RTOS) that leverages the latest and greatest enhancements in processor and hardware technology. Why is VxWorks the RTOS for your next project?

Product Name: Wind River Workbench
Company: Tilcon Software (acquired by Wind River)

Most proprietary development solutions limit flexibility, restrict interoperability of systems and tools, and actually increase the costs of development. Wind River has taken a different approach to helping our clients succeed. Based on the Eclipse platform, Wind River Workbench is a collection of tools that accelerates time-to-market for developers building devices with VxWorks and Wind River Linux. Through tight integration with the industry's leading RTOS and the leading device Linux distribution, Workbench offers the only end-to-end, open standards–based collection of tools for device software design, development, debugging, test, and management.

Product Name: True Circuits
Company: True Circuits, Inc.

True Circuits provides five general categories of low-jitter PLL hard macros: Clock Generator PLLs, Deskew PLLs, Spread Spectrum PLLs, Low Bandwidth PLLs, and High Resolution PLLs. We also offer low-jitter DDR DLL hard macros. These hard macros have excellent jitter performance while operating in the hostile mixed-signal noise environment present in today's ICs. They span nearly all performance points and features typically requested by ASIC, FPGA and SoC designers.

Product Name: How to Make Chip
Company: UMC Group

UMC's core services as a pure play foundry involve delivering the world's leading-edge technology through advanced research & development while providing the most advanced manufacturing capabilities. This includes 40nm production on 300mm wafers in fabs in Taiwan and Singapore. In addition, UMC employs a comprehensive IP program, protected by a security policy to guard the intellectual property rights of our customers and vendors. View UMC's complete SoC Solutions, or for other foundry services and general customer engagement procedure, please refer to the page containing the company's Service Flow chart.

Design Verification

Product Name: Headless Gateway Platforms
Company: Abilis Systems

Abilis headless gateway platforms are the best optimized designs for retailers and operators to provide a complete solution to deliver high quality television to mobile devices and IP based receivers in the house.

Product Name: Model Quality Assurance
Company: Accelicon Technologies

MQA (Model Quality Assurance) is to automate Model QA procedure and to link advance process technologies and design success.

Product Name: GRLIB IP
Company: Aeroflex Gaisler AB

The LEON3 processor core is a synthesizable VHDL model of a 32-bit processor complaint with the SPARC V8 architecture. The core is highly configurable and particularly suitable for system-on-a-chip (SOC)desgins.The configurability allows designers to optimize the processor for performance, power consumption, I/O throughput, silicon area and cost. The core is interfaced using the AMBA-2.0 AHB bus, and supports the IP plug& play method provided in the GRLIB IP Library

Product Name: AllowSim
Company: Allowtech

AllowSim is a comprehensive simulation and verification suite that provides a flexible environment for testing packet based, data path and protocol processing FPGA designs. AllowSim is the ideal tool for testing designs such as packet switch/routers, packet/network processors, and data paths for voice and video over IP.

Product Name: 4 um 12 GHz BiCMOS
Company: Alpha Industries International, Ltd.

-Single poly BiCMOS -Salicide for lower series resistance -non-recessed LOCOS isolated -SOG Planarization -2 layer A1Cu metalization -TiSi Schottky -Tungsten Plug contact/via fill -85 Ang. Gate oxide -TiN contact barrier metalization -Large Angle Tilt LDD's for Hot E performance

Product Name: 65 Volt BCDMOS
Company: Alpha Industries International, Ltd.

Technology: Smart power BCDMOS
Process: 1.2-um
Interconnect Layers (poly/metal): 2/2
Maximum Gate Count: 100,000
Operating Voltage (V): 65
I/O Voltage (V): 65
Maximum I/O Count: Die size-limited
Memory Types: Not available

Product Name: 7 um 12 GHz BiCMOS
Company: Alpha Industries International, Ltd.

-Twin Well BiCMOS -Gate oxide 150 Ang. -LOCOS isolated - 6550 Ang. -Composite pitch: 2.16um -2 Layer A1 0.5% Cu -Drawn Poly: 0.8um, pitch 1.6 um -W plugs with Ti/TiN liner -Contact:0.8um -PtSi Schottky (Y) -M1 pitch: 2.0um, M2 pitch:2.5 um -High Voltage MOS xtors (H)

Product Name: H.V. Modular cmos
Company: Alpha Industries International, Ltd.

  • Designs and manufactures cost effective CMOS ICs for a wide range of customer applications.
  • Includes products for digital, mixed signal, full analog, high voltage or moderate power.
  • Utilizes mature process for very high volume automotive needs since 1994.
  • Provides low cost modular CMOS solutions with high voltage 30V continuous, 40V transient or add DMOS for up to 1A.

Product Name: High Voltage Bipolar
Company: Alpha Industries International, Ltd.

  • High accuracy analog ASICs
  • Robust high-voltage analog
  • Smart control of high power and voltage
  • Ignition and voltage regulator ASICs

Product Name: Variety
Company: Altos Design Automation Inc. (Acquired by Cadence)

Variety is an ultra-fast standard cell characterizer of process variation aware timing models. It generates libraries that can be used with multiple statistical timing analyzers without requiring re-characterization for each unique format. It supports both linear and non-linear sensitivity accounting for systematic and random variation for any set of correlated or uncorrelated process parameters.

Product Name: Design and Verification Tools (DVT)
Company: AMIQ EDA

DVT is an integrated development environment (IDE) for the e language, SystemVerilog, Verilog, and VHDL.  It helps design and verification engineers increase the speed and quality of code development and simplify the maintenance of reusable libraries and legacy code. 

DVT is built on the Eclipse Platform and is similar to well-known programming tools like Visual Studio and IntelliJ. It comprises an IEEE standard-compliant parser, a smart code editor, an intuitive GUI, and a comprehensive set of features that help with code inspection, navigation, documentation, and debugging. It integrates with all major simulators, revision control systems, and bug tracking engines.

DVT supports the popular verification methodologies UVM, OVM, and VMM and provides automated UVM/OVM compliance checking. 

Product Name: DVT e Language IDE User Guide
Company: AMIQ EDA

DVT e Language IDE User Guide

Product Name: Verissimo SystemVerilog Testbench Linter
Company: AMIQ EDA

SystemVerilog is a rich object-oriented programming language that provides powerful constructs and a high level of programming flexibility. Such capabilities meet the needs of today's complex design and verification requirements, but at the same time introduce new challenges in code development. For example, the possibility of implementing the same functionality in multiple ways may impact the simulation performance or lead to unexpected behavior.

Product Name: Copper PCB
Company: Amitron Corp.

Demand for heavy copper-clad circuits in automotive, computer, industrial controls, and military is growing very fast. More than 90% of the existing circuit board manufacturing is limited or not capable of producing reliable heavy copper printed circuit boards.

Product Name: Hotspot Pattern Analyzer
Company: Anchor Semiconductor, Inc.

Hotspot Pattern Analyzer provides powerful solutions for analysis and dispositioning of different types of violations found from design verification to manufacturing process characterization and monitoring. Integrated in NanoScope™ pattern-centric DFM platform, the hotspot analyzer takes hotspot reports from tools such as OPC verification or layout process sensitivity checking, as well as hotspots detected in manufacturing.

Product Name: NanoScope-DFP
Company: Anchor Semiconductor, Inc.

NanoScope-DFP is manufacturing-aware design verification tool. It is used at pre-tapeout design stage and complementary to DRC to ensure lithographic-friendly layout. Please contact Anchor specialists for more information.

Product Name: NanoScope-DPL™
Company: Anchor Semiconductor, Inc.

NanoScope-DPL™ (Defect Pattern Library) is built on Anchor’s pattern-centric NanoScope platform. DPL provides patterning knowledge sharing and reuse, allows users to save patterns from different sources: litho-unfriendly patterns in OPC verification, problematic patterns in mask making, and yield limiting patterns in wafer printing.

Product Name: NanoScope-PRV
Company: Anchor Semiconductor, Inc.

NanoScope-PRV (PRV) is a market-leading OPC/RET inspection tool. It is a software-based solution which has superior advantages in full-chip accuracy and performance. Together with its unparalleled analysis capability and ease-of-use, PRV provides our customers the fastest ROI and lowest COO (cost of ownership). It is silicon-proven at 0.15um, 0.13um, 0.11um, 90nm and below. It has successfully helped many of our customers around the world to cut down their OPC/RET development cycle time and avoid the costly mask making and wafer fabrication.

Product Name: ESP-CV™
Company: ArchPro Design Automation Inc. (acquired by Synopsys)

ESP-CV verifies that two different design representations are functionally equivalent. These designs may be described as Verilog behavioral models, RTL, UDP’s, gates, transistors, or SPICE netlist views.

Product Name: MVRC
Company: ArchPro Design Automation Inc. (acquired by Synopsys)

MVRC is a voltage-aware static checker that allows engineers to rapidly verify the designs that use voltage control techniques for power management. Additionally MVRC enables verification of the correct implementation of protection circuitry from an architectural and structural perspective.

Product Name: MVSIM
Company: ArchPro Design Automation Inc. (acquired by Synopsys)

MVSIM is the world’s first EDA solution for verification of power-managed designs and supports ARM® Intelligent Energy Manager (IEM) technology. Multi-voltage chip designers today have to settle for verification of power management schemes after the silicon has been created. Bugs are often found in power management schemes after silicon is spun causing time and cost-consuming revisions to silicon, system and software. MVSIM, for the first time, changes this paradigm to enable verification prior to silicon spins. MVSIM enables the user to bring any system level architectural decision on voltage scaling into RTL and verify it.

Product Name: Dual Row QFN Test Sockets
Company: Ardent Concepts, Inc.

With RC Spring Probe™ technology, Ardent Concepts has made a quantum leap in testing connectivity. The RC Spring Probe™ architecture is designed to accommodate a variety of applications and package types. Ardent contactors are designed for high-performance over extended cycles for QFN/MLF/DFN and other package types.

Product Name: RC Scrub-R
Company: Ardent Concepts, Inc.

This revolutionary new 'wiping' action RC contact technology is a Patented Ardent Solution for ATE testing of Chipscale, QFN, MLF, MLP and other small leadless devices. RC Scrub-R technology provides: Exceptional Signal Integrity, Long Life, Lower Co mponent Costs and Lower Overall Costs 

Product Name: ACADto3Di
Company: Artwork Conversion Software, Inc.

ACADto3Di is 3D modeler for IC packages that have been "drawn" inside of AutoCAD. It enables any package designer to create a 3D model from a simple bond document. Once converted to the 3Di format, the package can be viewed in 3D and the wires can have a full 3D DRC performed.

Product Name: Active-HDL 8.2
Company: ASICSoft, Inc.

Active-HDL is an integrated easy-to-use FPGA Design and Simulation solution, providing a robust design creation tool suite, a high-performance mixed-language simulator and a multi-vendor FPGA flow manager that controls Simulation, Synthesis and Implementation for industry leading FPGA devices, such as Actel™, Altera®, Lattice®, Quicklogic®, Xilinx® and over 87 popular EDA tools, all-in-one common environment.

Product Name: Quad V7 Prototyping System
Company: ASICSoft, Inc.

The proFPGA quad V7 system is an complete, scalable, and modular multi FPGA solution, which fulfills highest needs in the area of FPGA based Prototyping. It addresses customers who need an scalable and most flexible high performance ASIC Prototyping solution for early software development and real time system verification. The innovative system concept and technologies offer highest flexibility and reuseability for several projects, which guarantees the best return on invest.

Product Name: Anti Tamper (AT) Platform for Secure SoCs
Company: Athena

The Athena Group solves the costly problem of deploying AT solutions. The first product of its kind, TeraFire AT circumvents the NRE, manufacturing, and time to market costs of conventional AT approaches. TeraFire AT uniquely combines the AT, design, and cost strengths of single-
chip cryptographic modules with information assurance (IA) techniques, and delivers them as a standardized platform that includes both hardware and software. This approach finally bridges the return on investment gap for AT technology in digital electronic systems.

Product Name: AVXCOR
Company: Athena

Athena delivers the world's fastest video cross correlator powered by the world's most efficient Fast Fourier Transform core. Cross correlation systems using matched filters is the methodology of choice for automatic target recognition (ATR), surveillance, and advanced visual identification friend or foe applications. Whatever your application, the Athena AVXCOR delivers unprecedented performance, low power, and a small footprint. Scalable in both performance and image size, the AVXCOR has the flexibility and throughput to tackle nearly any video cross correlation task.

Product Name: 8051 Architecture
Company: Atmel Corporation

Atmel offers a broad range of microcontrollers based on the 8051 instruction set, enabling developers to leverage proven technology combined with the latest features and functionality. Our rich portfolio includes devices ranging in code density from 2K bytes to 128K bytes.

Product Name: CAN/VAN Networking
Company: Atmel Corporation

Controller Area Network (CAN) networking is widely used in electronic architectures for today’s modern vehicles. Atmel® offers a wide range of solutions for CAN networking, including AVR 8-bit RISC microcontrollers and transceivers. Atmel Flash-based microcontrollers are compliant with V2.0A and V2.0B of the CAN protocol, and offer flexible in-system programming capabilities.

Product Name: MCU Wireless
Company: Atmel Corporation

In an increasingly connected world, wireless connectivity is more essential than ever. Consumers demands are escalating as wireless extends from PC peripherals and home entertainment applications to the Smart Grid and beyond.

Product Name: Analog and Mixed Signal ASIC Experts
Company: austriamicrosystems AG

With almost 30 years of experience in the design and manufacturing of analog and mixed signal ASICs, ams offers high quality products to the automotive, consumer, industry and healthcaremarkets.  

Product Name: AIEC9DVB
Company: Automotive Integrated Electronics Corporation

The AIEC9 System on Chip (SoC) Development Board (AIEC9DVB) provides an environment for
developing production intent, custom SoCs that are based on the AIEC9 microprocessor (mP) core.
Typically, an SoC contains a mP core, associated memory, digital peripherals, and an analog to digital converter. The AIEC9DVB provides provisions for all of these functions such that the SoC can be completely prototyped before committing to silicon. In this way, a custom SoC can be developed to meet the requirements of a specific application while optimizing the system for performance and cost.

Product Name: APIC
Company: Automotive Integrated Electronics Corporation

The ARM Processor Interrupt Controller (APIC) prioritizes and submits interrupt requests to the
microprocessor for servicing. The APIC is compatible with ARM7TDMI and ARM9TDMI microprocessor cores and allows expansion of ARM’s two interrupt sources to thirty-two interrupt sources with extremely low software overhead. One interrupt source can be routed to the ARM’s nFIRQ line for an extremely low latency interrupt source. Each interrupt source can be configured as a software or hardware interrupt.

Product Name: J1850VB
Company: Automotive Integrated Electronics Corporation

The Real Time Engine Controller (RTEC) is an intelligent peripheral that is used in conjunction with a microprocessor for the control of internal combustion engines. RTEC has been specifically designed to increase engine performance and reduce emission output through precise delivery of ignition and injection pulses. RTEC’s advanced design features significantly reduce the servicing of interrupts by the controlling microprocessor, which effectively increases throughput allowing more complex control algorithms. The intelligent hardware contained within RTEC simplifies software development with the removal of many low-level routines normally required to control less intelligent peripherals.

Product Name: NIROC
Company: Automotive Integrated Electronics Corporation

The Non-Intrusive RAM Overlay Calibration (NIROC) macrocell is designed to provide a real-time calibration solution for ARM9 microprocessor cores. Automotive powertrain applications involve large amounts of data which are used to define the operating parameters of the engine. These data are stored in “calibration tables” in instruction space. The values to be programmed into these tables are chosen during calibration. Traditional approaches to calibration have used parallel memory emulation technology.

Product Name: Serial Communications Interface (SCI)
Company: Automotive Integrated Electronics Corporation

The Serial Communications Interface (SCI) is an asynchronous full duplex serial communication
interface that uses standard Non-Return to Zero (NRZ) data formatting. The data format includes a single start bit, either 8 or 9 data bits, and a single stop bit. The last data bit can be programmed as either an odd or even parity bit. When enabled, parity is automatically generated by the transmitter and checked by the receiver. Parity errors detected by the receiver are indicated with the parity error flag.

Product Name: SolidAC™
Company: Averant

SolidAC™  is a program that automatically checks a circuit for a number of common design problems. Reading only the design source, and with very little input from the user, AutoChecks tracks down such problems as clock domain crossing problems, and a host of other problems that cause a design to function improperly.

Product Name: Solidify™
Company: Averant

Solidify™ Static functional verification is a unique form of analysis applied to RTL design descriptions. The strength of this analysis is that it is exhaustive by nature, and quickly uncovers hidden design flaws and corner cases.

Product Name: SolidPC™
Company: Averant

AMBA compliance in a snap. Built upon formal technology, SolidPC employs a pre-defined set of technology rules to verify compliance with the AMBA protocol specification. SolidPC has an easy, flow-oriented interface, and requires no vectors to run. Leveraging the Solidify core engine, the tool efficiently executes a series of exhaustive proofs, automatically generating testbenches for rules that fail.

Product Name: SolidSEC
Company: Averant

SolidSEC verifies that two versions of a circuit are functionally equivalent after sequential optimizations are performed on one circuit. Examples of such optimizations are clock gating and retiming which occur during power reduction optimizations.

Product Name: SolidTC™
Company: Averant

Confidence with timing analysis. SolidTC is a timing constraint verifier that checks the validity of False-paths and Multi-cycle paths declared in an SDC file. Built upon the Solidify engine, it uses formal techniques to quickly and exhaustively verify correctness of these timing exceptions.

Product Name: XAUI Capture and Playback Board
Company: Baykal Technology, Inc.

XAUI (Extended Auxilary Unit Interface) real-time Capture/Playback, with on board 4Giga Byte memory and High Speed USB 2.0 interface, to host computer for data retrieval and upload. Integrated Host PC Application to interface with XAUI Board through Hi-Speed USB Cable. Point-to-point baseband data transmission over 50 ohm controlled-impedance media. Selectable instant Tx Test Pattern generation and corresponding expected Rx data integrity check in real-time.

Product Name: B2 Spice A/D v4
Company: Beige Bag Software

A fully featured mixed mode simulator that builds upon B2 Spice A/D 2000's ease of use and adds its own powerful and innovative features to make it the simulator of choice for power SPICE users.

Product Name: Analog FastSPICE Mega Circuit Simulator
Company: Berkeley Design Automation, Inc.

Analog FastSPICE™ Mega is the industry’s first silicon-accurate circuit simulator for memories and other mega-scale circuits such as CMOS image sensors. AFS Mega™ extends the company’s foundry certified Analog FastSPICE Platform with the capacity, performance, and features required for mega-scale circuit verification and characterization down to and including FinFET-based process nodes.

Product Name: Analog FastSPICE Transient Noise Analysis
Company: Berkeley Design Automation, Inc.

Device noise is critical in sub-90nm CMOS processes, and it limits circuit performance at 45nm CMOS and below. Only Analog FastSPICE Transient Noise delivers nanometer SPICE accurate device noise analysis for every type of circuit. Transient noise analysis injects random white and flicker noise for each device noise source at each timestep during transient simulation to produce output waveforms that include realistic device noise effects. Post-processing the waveforms transforms the device noise effect into frequency domain for comparison to specifications.

Product Name: Spartan3 -MXS3FK-DSP
Company: BitMapper Integration Technologies Pvt. Ltd.

SPARTAN-3 DSP Protoboard provides user friendly development platform, useful to physically verify DSP algorithms or simple digital designs around SPARTAN3 FPGA.

Product Name: Virtex-6 Giga ADC Board
Company: BitMapper Integration Technologies Pvt. Ltd.

The Xilinx Virtex-6 Giga ADC Board is a unique development board targeting the applications in the RF domain e.g. RADAR and SDR (Software Defined Radio). The Virtex-6 FPGA, XC6VLX75T-1FF784 device with the capacity of 74,496 logic cells is interfaced with the wide bandwidth ADC AD08D1500 from National semiconductor. The board includes onboard interfaces like Ethernet and USB for PC communication. The rocket IO interface can transfer data between the board as high rate as 3.125 Gbps.

Product Name: Electronic Warfare
Company: BitSim AB

Electronic Warfare is an area that traditionally has been shrouded in secrecy. If one searches for books covering the topic one won’t find very many titles. This is per definition a military field involving the use of electromagnetic energy to determine, exploit, reduce or prevent hostile use of the electromagnetic spectrum. Is it necessary to have electronic warfare equipment or is it better to spend the money on other types of weapons?

Product Name: fiXtress ASR - Automated Schematic Review
Company: BQR Reliability Engineering Ltd.

fiXtress™ Automated Schematic Review detects schematic design errors based on component parameters and good engineering practices defined by rules. Typical engineering practices result in a manual, complex design review process, and fiXtress ASR automates this procedure. It increases design efficiency, robustness and quality and verifies proper implementation of reference design as specified by the IC and ASIC manufacturers.

Product Name: fiXtress MTBF Pro + Stress Derating Analysis
Company: BQR Reliability Engineering Ltd.

BQR’s fiXtress™ MTBF performs Mean Time Between Failure prediction and Component Electrical Stress Derating analysis. The MTBF module uses two methods: The first is Parts Stress using stress values such as power, voltage and current, which are automatically retrieved from fiXtress Rapid or Precise to calculate component failure rate based on stress.  The second method is Parts Count, using a stress level of 50% as default, for MTBF estimation before performing Parts Stress analysis. The software includes best practices for derating which helps create more realistic stress derating and component rating selection, increasing product robustness. The Stress Derating analysis includes a feature which estimates the average temperature rise of the PCB, even before layout, for an accurate stress derating analysis.  With this information, the designer can select the proper size of the component rating, and place hot components in a cooler area. Additionally, assumptions can be made regarding required Air Flow (i.e. fan capacity) for reducing the temperature of the entire PCB.

Product Name: fiXtress Precise Electrical Stress Analysis
Company: BQR Reliability Engineering Ltd.

fiXtress™ Precise is a comprehensive Design for Reliability (DFR) tool that optimizes the final design before production. BQR’s fiXtress Precise uses Kirchhoff laws for DC & AC stress analysis with an automated and innovative process, while accounting for component operation modes. The analysis results, including operational power, voltage and current are then fed to the MTBF Pro for electrical components derating analysis.

Product Name: fiXtress Rapid Electrical Stress Analysis
Company: BQR Reliability Engineering Ltd.

fiXtress™ Rapid is a simple, effective Design for Reliability (DFR) tool that accelerates and optimizes the design process. fiXtress Rapid enables the user to reduce development time by performing stress analysis during the design process. It helps select the correct component rating based on stress analysis. fiXtress Rapid uses Ohm’s law, propagating the voltage potential via all nets in order to calculate the operational DC power, voltage and current of each connected component. This method can be used even when the design is incomplete. The analysis results, including operational power, voltage and current are then fed to the MTBF Pro for electrical components derating analysis.

Product Name: Tachyon™ OPC+
Company: Brion Technologies

Built on the ultrafast and scalable Tachyon platform and enabled by Tachyon's highly accurate, production-proven focus-exposure modeling (FEM) model, Tachyon OPC+ delivers accurate and efficient process-window optical proximity correction (OPC), while meeting throughput and cost of ownership requirements for volume production at the 45nm technology node and below.

Product Name: Tachyon™ RDI and LMC
Company: Brion Technologies

Tachyon RET Design inspection (RDI) and Lithography Manufacturability Check (LMC) are production-proven full-chip, full process window, model-based verification tools that deliver the speed and accuracy to meet the deep subwavelength (or low-k1) photolithography verification challenge of today and tomorrow.

Product Name: Cadence 3D Design Viewer
Company: Cadence Design Systems, Inc.

Cadence® 3D Design Viewer provides a realistic visualization of how the design will look when fabricated. Engineers can pan and zoom in on the image from any angle to explore the design in detail. For design reviews, engineers can take a snapshot of the screen and use the built-in annotation tools to add shapes, arrows, and text. 3D Design Viewer also provides interactive 3D wirebond design rule checking.

Product Name: Cadence QRC Extraction
Company: Cadence Design Systems, Inc.

Cadence® QRC Extraction includes a full spectrum of technologies for all nanometer-scale design styles including RF, analog, mixed-signal, custom digital, and cell. These advanced capabilities include RLCK extraction, advanced process modeling, multi-corner and statistical extraction, distributed processing, netlist reduction, substrate parasitics extraction, an integrated field solver, and hierarchical extraction. With Cadence QRC Extraction, designers have an easy-to-use solution for rapid analysis to achieve faster timing closure and higher quality of silicon.

Product Name: Encounter Conformal Constraint Designer
Company: Cadence Design Systems, Inc.

Encounter Conformal Constraint Designer automates the generation, validation, and refinement of constraints to ensure that timing constraints are valid throughout the entire design process, helping designers achieve rapid timing closure.

Product Name: Incisive Enterprise Specman Elite®
Company: Cadence Design Systems, Inc.

Part of the Cadence® Incisive® functional verification platform, Incisive Enterprise Specman products blend leading-edge process automation technology with the comprehensive Plan-to-Closure Methodology to simplify and speed verification. Specman® products automate the entire verification process, from individual blocks to full chips to the project level. With Specman technology, designers benefit from increased productivity and a predictable path to high-quality silicon.

Product Name: Incisive Palladium® series
Company: Cadence Design Systems, Inc.

The Cadence® Incisive® Palladium® series delivers high system throughput, verification automation, and advanced debug to perform plan- and metric-driven system-level hardware/software co-verification. Capable of handling chip designs of up to 256 million gates, it also enables software to be developed and verified on a real hardware implementation using live data.

Product Name: Incisive Xtreme series
Company: Cadence Design Systems, Inc.

The Cadence® Incisive® Xtreme® series of high-performance, high-capacity accelerators/emulators speeds the functional verification of designs at the behavioral, RTL, and gate levels. Designed for multi-user, multi-site, multi-purpose systems, the Xtreme series integrates with the Incisive simulation environment to perform advanced verification planning and drive coverage-based, metric-driven verification closure.

Product Name: Incisive® Formal Verifier
Company: Cadence Design Systems, Inc.

Cadence® Incisive® Formal Verifier allows design teams to start RTL block verification months earlier than when using traditional simulation-based techniques. Its formal, assertion-based approach and exhaustive analysis capabilities ensure verification quality by pinpointing the source of bugs and detecting the corner-case errors that other methods often miss.

Product Name: Condor 900
Company: Camtek

Designed for the high production volume environment, the Condor 900 product series is the ideal choice for inspection and metrology addressing the most demanding semiconductor market applications and the emerging 3D-IC market.

Product Name: Falcon 600
Company: Camtek

Camtek’s Falcon 600 is a versatile and flexible inspection platform designed to enable easy customization for a wide variety of non-standard applications. Designed to handle both unframed and frame-mounted wafers, while maintaining  superb detection ability, high throughput and ease of operation, the Falcon family is known for. Customized Application Examples include: Bonded MEMS wafers (especially with glass tops); transparent and translucent materials (with or without pattern); wafers mounted on expansion rings (hoops); Perforated wafers, used to manufacture MEMS sensors, optical devices and inkjet print heads; thin wafers that tend to sag under their own weight.

Product Name: Gannet
Company: Camtek

Gannet is the first submicron macro M&I solution at high throughput enabling inspection of all wafers at all lots. Gannet helps customers to significantly reduce inspection costs without compromising 100% inspection. Using Gannet for 100% inspection covers all killer defects above 1µm and ensures yield improvement and high ROI.

Product Name: Schematic Capture for Electronic Design
Company: Capilano Computing System

  • Dockable toolbars give instant access to schematic editing functions and status information.
  • Modeless operation lets you perform most schematic operations like part placement and repositioning, wire editing and  selection without using a single menu or typed command.
  • Product Name: CEVA-MM2000
    Company: CEVA, Inc.

    Today’s mobile devices – from smartphones to tablet computers – are required to perform a tremendous variety of compute-intensive multimedia tasks while consuming as little power as possible. These tasks include capturing, processing, and displaying high-definition images and videos, capturing and playing high-definition audio, voice processing, and advanced capabilities such as face detection and gesture recognition. Embedded cameras in mobile devices require significant Image Signal Processing (ISP) in order to create quality images and video clips and to support embedded vision applications.

    Product Name: CEVA-SAS
    Company: CEVA, Inc.

    The enterprise storage industry remains heavily committed to the SCSI protocol. With ever-increasing requirements for higher performance, the enterprise storage market is rapidly evolving from SAS2.0 to SAS3.0, doubling the line rate to 12Gbps.

    Product Name: Multi-Image Super-Resolution on CEVA‑MM3101
    Company: CEVA, Inc.

    The CEVA Super-Resolution (SR) algorithm increases quality of still images for mobile devices. In today’s world, where smartphones are the most commonly used camera devices, image quality is still limited due to slim form factor and strict power constraints. Super-Resolution is an important breakthrough, enabling systems manufacturers and OEMs to increase the quality of images on any device, regardless of these factors.

    Product Name: SoC Design Platform
    Company: ChipStart LLC

    With more than 800 employees, Faraday is the largest fabless ASIC design service company in Asia. It is also a leading vendor of silicon-proven semiconductor IP. Faraday has already completed over 5,000 successful designs and helps customers ship billions of chips. Providing the most comprehensive IP portfolio and the most competent SoC design services, Faraday is a design partner of choice.

    Product Name: Turnkey Design Services
    Company: ChipStart LLC

    DELTA has been at the forefront of the microelectronics industry for over 25 years, providing IC design, testing, distribution, and complete supply chain services to some of the world’s bestknown OEMs/ODMs and fabless semiconductor companies.

    Product Name: Wide-Band High-Frequency Digital PLL
    Company: ChipStart LLC

    In an effort to continually offer our customers the most advanced, highly differentiated solutions on the market, we are proud to introduce this revolutionary Wide-Band High-Frequency Digital PLL.

    Product Name: Analogue TWR
    Company: CML Microcircuits

    CML's two-way radio products address both the full baseband and individual communication requirements of analogue military, PMR/LMR, trunked and leisure radio systems.

    Product Name: Digital PMR - DPMR
    Company: CML Microcircuits

    CML offers a wide range of voice, signalling and data processing ICs for digital communications systems, dPMR, integrating baseband processing and systems specific Air Interface.

    Product Name: AD1989A
    Company: Conexant Systems Inc

    The AD1989A audio CODEC and software provide superior HD audio quality and high performance. The AD1989A has eight 101 dB DACs and six 92 dB ADCs, three stereo headphone ports, C/LFE swapping, a 2-channel digital microphone interface, digital and analog PCBeep, two independent S/PDIF outputs, and a S/PDIF input, making the AD1989A the right choice for PCs where performance is the primary consideration. The jack retasking feature on this product supports various configurations including 5.1 on 3 jacks, and front panel jack retasking. The AD1989A is available in a 48-lead RoHS compliant lead frame chip scale package in both reels and trays.

    Product Name: CX20665
    Company: Conexant Systems Inc

    Conexant's CX20665 Audio CODEC with integrated mono Class-D speaker amplifier is specifically designed for 2.0 channel audio entertainment. The System-on-chip (SoCs) is a low-power, 102 dB Signal-to-Noise Ratio (SNR), high-performance audio CODEC with two independent pairs of DACs and two independent pairs of ADCs that support Multi-Streaming and Real Time Communications applications. High-performance analog audio performance is achieved with an integrated 5-volt to 3.3-volt low-dropout (LDO) voltage regulator, which lowers external Bill of Materials (BOM) cost. The device features dual ProCoustic™ capless headphone drivers and dual digital microphone interfaces, which further reduces BOM cost by eliminating the need for external amplifier and DC-blocking capacitors.

    Product Name: PCB Testing & Inspection
    Company: Contract Electronics Manufacturing Services: Kingfield Electronics UK

    This activity builds on our box build activity to provide complete manufacturing solutions. Not only are we capable of building individual instruments, but many of our customers applications require the build of multiple instruments, and the configuration of individual units to form systems. These are configured to the individual requirements of each contract or sales order.  

    Product Name: Design Environment COSIDE®
    Company: COSEDA Technologies

    The Design Environment COSIDE® is the first tool which permits the design of electronic hard- & software components in the context of the whole system. It is easy to adapt and enables a cross-domain optimization of the system concept & architecture and thus the design of next generation products. COSIDE® is intuitive to use for experienced soft- and hardware designers, while reducing the effort for modelling and simulation by the factor of 10.
    We provide the reference implementation for the SystemC AMS part of the standard. Which can be downloaded for free at www.coseda-tech.com/systemc-ams-proof-of-concept. On top of this standard we developed models, libraries and IP's, which are integrated within our design environment COSIDE®.

    Product Name: MEMS+IC DESIGN (MEMS+)
    Company: Coventor

    MEMS products require a tight integration between the MEMS device and the accompanying circuit, wheter it's an ASIC, Custom-IC, or other circuit. The advanced tools and features in MEMS+ automate the tasks for generating MEMS models for IC Design software, optimizing mems + ic's together, simplifying design entry in 3-D, enabling companies to reduce their MEMS product turn around time and avoid many human related errors.

    Product Name: Antenna Magus
    Company: CST - Computer Simulation Technology

    Antenna Magus is a software tool to help accelerate the antenna design and modeling process. It increases efficiency by helping the engineer to make a more informed choice of antenna element, providing a good starting design. Validated antenna models can be exported to CST MICROWAVE STUDIO®from a huge antenna database which means that the engineer can get to the customization phase of an antenna design quickly and reliably. Antenna Magus is a product of Magus (Pty) Ltd. It can be purchased through CST distribution channels.

    Product Name: CST BOARDCHECK™
    Company: CST - Computer Simulation Technology

    CST BOARDCHECK™ is an EMC, SI and PI rule checking program that reads popular board files from Cadence, Mentor Graphics, and Zuken as well as ODB++ (e.g. Altium) files and checks the PCB design against a suite of EMC or SI rules. The kernel used by CST BOARDCHECK is the well-known software tool EMSAT.  

    Product Name: CST CABLE STUDIO®
    Company: CST - Computer Simulation Technology

    CST CABLE STUDIO® (CST CS) is dedicated to the three-dimensional analysis of signal integrity (SI), conducted emission (CE), radiated emission (RE), and electromagnetic susceptibility (EMS) of complex cable structures in electrically large systems. It provides powerful import filters from popular MCAD and ECAD tools for smooth integration into the industrial workflow.

    Product Name: CST DESIGN STUDIO™
    Company: CST - Computer Simulation Technology

    CST DESIGN STUDIO™(CST DS) is a powerful and easy-to-use schematic design tool that radically speeds up the analysis, synthesis, and optimization of complex structures and electromagnetic systems. How does it work? CST DESIGN STUDIO™ (CST DS) enables the synthesis of complex systems from simulation blocks This blocks may represent circuit components, Ibis or Touchstone models, or analytic models from an inbuilt library. Particularly valuable are parametric models from various members of the CST STUDIO SUITE®, such as CST MICROWAVE STUDIO®, CST PCB STUDIO®, or CST CABLE STUDIO®. All the simulation blocks can be synthesized in CST DS. The simulation task concept enables the rapid analysis of various aspects of the complete system's behavior.

    Product Name: CST EM STUDIO®
    Company: CST - Computer Simulation Technology

    CST EM STUDIO® (CST EMS) is dedicated to the simulation of static and low-frequency devices.  Embedded in the same CST user interface, CST EMS features a variety of solver module to tackle electrostatics, magnetostatics, current flow and low-frequency problems and can be coupled to other CST STUDIO SUITE® modules for charged particle and multiphysics simulations. Applications include: actuators, brakes, EMC, generators, motors, sensors, transformers measurement instrumentation, and shielding effects.

    Product Name: CST EMC STUDIO®
    Company: CST - Computer Simulation Technology

    CST EMC STUDIO® (CST EMCS) is a specialized software package for analyzing electromagnetic compatibility (EMC) and electromagnetic interference (EMI) using 3D electromagnetic field simulation. The solvers and tools in CST EMCS have been selected to be especially relevant to EMC engineers, and are drawn from the mature technology of CST STUDIO SUITE and CST BOARDCHECK. The range of solvers allows emissions and susceptibility to be investigated across a range of different components. Alongside the general purpose time and frequency domain solvers, CST EMCS also includes cable harness solvers, EDA and CAD import tools, circuit simulation tools, PCB design rule checking and compact models for simulating vents and seams efficiently. With CST's System Assembly and Modeling (SAM) framework, simulations of individual components can also be combined for a hybrid simulation. Through its dedicated EMC workflows, including the Interference Task for analysis of multiple RF systems on a platform, CST EMCS can be integrated into a wide range of product design processes.

    Product Name: CST MICROWAVE STUDIO®
    Company: CST - Computer Simulation Technology

    CST MICROWAVE STUDIO®(CST® MWS®) is a specialist tool for the 3D EM simulation of high-frequency components. CST MWS' unparalleled performance makes it the first choice in leading R&D departments. CST MWS enables the fast and accurate analysis of high frequency (HF) devices such as antennas, filters, couplers, planar and multi-layer structures and SI and EMC effects. Exceptionally user-friendly, CST MWS quickly gives you an insight into the EM behavior of your high-frequency designs. CST promotes Complete Technology for 3D EM. Users of our software are given great flexibility in tackling a wide application range through the variety of available solver technologies. Besides the flagship module, the broadly applicable Time Domain solver and the Frequency Domain solver, CST MWS offers further solver modules for specific applications. Filters for the import of specific CAD files and the extraction of SPICE parameters enhance design possibilities and save time. In addition, CST MWS can be embedded in various industry standard workflows through the CST STUDIO SUITE® user interface.

    Product Name: CST MPHYSICS® STUDIO
    Company: CST - Computer Simulation Technology

    CST MPHYSICS® STUDIO (CST MPS) is a powerful and easy-to-use tool for thermal and mechanical stress analysis. Systems and devices very rarely fall neatly into just one area of physics, and multiphysics simulation is often necessary for a complete simulation of the device’s characteristics. High-frequency fields, currents, and particle collisions are all sources of heat that EM engineers frequently encounter, and so CST MPS is fully integrated into CST STUDIO SUITE® to enable coupled EM-multiphysics simulation with other tools such as CST MICROWAVE STUDIO®, CST EM STUDIO®, and CST PARTICLE STUDIO®. With the CST MPS thermal solver, the changes in temperature generated by these interactions can be modeled, and heat flow within the device simulated to test the performance of heat sinks and ensure the reliability of temperature-sensitive components. The thermal solver can even simulate bioheat effects, to calculate how fields will interact with the body.

    Product Name: CST PARTICLE STUDIO®
    Company: CST - Computer Simulation Technology

    CST PARTICLE STUDIO® (CST® PS) is a specialist tool for the fast and accurate analysis of charged particle dynamics in 3D electromagnetic fields. Powerful and versatile, it is suitable for tasks ranging from designing magnetrons and tuning electron tubes to modeling particle sources and accelerator components. The particle tracking solver can model the behavior of particles through static fields, and with the gun iteration, space charge limited emission. The particle-in-cell (PIC) solver, which works in the time domain, can perform a fully consistent simulation of particles and electromagnetic fields. For relativistic applications, the wakefield solver can calculate how the fields generated by particles traveling at (or close to) the speed of light interact with the structure around them.

    Product Name: CST PCB STUDIO®
    Company: CST - Computer Simulation Technology

    CST PCB STUDIO® (CST PCBS) is a specialist tool for signal integrity (SI), power integrity (PI), and electromagnetic compatibility (EMC) analysis on printed circuit boards (PCB). It integrates easily into the EDA design flow by providing powerful import filters for popular layout tools from Cadence, Zuken, and Altium. Prior to modeling and simulation, the imported layout is automatically checked in order to correct potential geometric errors. The intuitive workflow of CST PCBS and its accurate and modern simulation techniques allow for investigations of any kind of PCBs, from single-layer boards up to multi-layer high-speed designs. Effects like resonances, reflections, crosstalk, power/ground bounce and simultaneous switching noise (SSN) can be simulated at any stage of product development, from pre-layout to post-layout phase.

    Product Name: CST STUDIO SUITE 2018
    Company: CST - Computer Simulation Technology

    Product Name:  CST STUDIO SUITE 2018
    Company: CST - Computer Simulation Technology   CST STUDIO SUITE 2018 builds on industry-leading CST electromagnetic simulation technology with a range of new features for the design, simulation and optimization of components and systems. These tools increase the versatility of CST STUDIO SUITE for modeling and simulating complex systems, and strengthen workflows for applications such as antenna placement and installed performance, co-site interference mitigation, and SAR and exposure analysis. 

    Product Name: Optenni Lab
    Company: CST - Computer Simulation Technology

    Easy-to-use matching circuit optimization and antenna analysis software Optenni Lab is a novel software with innovative analysis features that increases the productivity of antenna designers and speeds up the antenna design process. Optenni Lab offers fast fully automatic matching circuit optimization tools, estimation of the obtainable bandwidth of antennas and calculation of the worst-case isolation in multi-antenna systems. Optenni Lab is a product of Optenni Ltd. It can be purchased through CST distribution channels.

    Product Name: Async SRAMs
    Company: Cypress Semiconductor Corp.

    Cypress is the industry leader in the Fast Asynchronous SRAM market with the industry's widest portfolio (4 Kb to 32 Mb and with 64Mb – sampling Now and production by August 2011). Fast SRAM’s are available in industry-standard voltage, bus-width, and package options along with Fast access time of 10ns, making it appropriate for applications such as networking equipment, high-end computing etc.

    Product Name: 1394 Bus Analyzers
    Company: DapTechnology B.V.

    When developing products based on complex bus systems, use of the correct development tools is the crucial factor in achieving quality and reducing time to market. FireSpy analyzers are such tools and their abilities go way beyond those of a pure IEEE1394 bus analyzer. This paper explains the requirements for a state‐of‐the‐art IEEE1394 development tool and the great advantages such a tool can offer to a developer.

    Product Name: FireTrac™ - Advanced I/O adapter
    Company: DapTechnology B.V.

    FireTracTM is a new product to complement DapTechnology’s successful FireSpy® and Mil1394OHCI host adapter product lines. It clearly is the next generation Mil1394 (SAE AS5643) data processing, simulation and testing solution. DapTechnology has seen an increasing demand for more streamlined hardware systems for the processing of AS5643 (and generic 1394) data streams. Customers get more and more involved in monitoring the actual data content rather than the 1394 layer. And for simulation purposes they require advanced error insertion capabilities that can only be accomplished with non-off-the-shelf Link Layer implementations. IRIG time-stamping of monitored events on the bus is a typical requirement.

    Product Name: NAND Flash Programming
    Company: Data I/O Corporation

    Because of the efficient architecture of NAND flash, its cell size is much smaller than a NOR cell. This, in combination with a simpler production process, enables NAND architecture to offer higher densities with more capacity on a given die size. The cost per bit is much lower than NOR.  As a result, more bits of NAND memory have been sold than any other type.

    Product Name: Communication Interface/ IP Cores / 16550 Multi Channel UART
    Company: Dexcel Electronics Designs Pvt. Ltd.

    The Universal Asynchronous Receiver and Transmitter (UART) core provides a means of serial communication between system implemented on FPGA and external device. The core implements RS-232 protocol. The UART supports separate FIFOs in transmit and receive paths. The UART core does not provide flow control.

    Product Name: Communication Interface/ IP Cores / UART to SPI
    Company: Dexcel Electronics Designs Pvt. Ltd.

    SPI is a full duplex, serial bus that is very common in the embedded world. SPI devices are normally smaller in size, compared to parallel interface devices, mainly because of its lesser I/O count. With this IP, the user can interface a PC that has a UART port, to communicate to SPI slave devices.

    Product Name: Data Acquisition / Digital Data Capture Card
    Company: Dexcel Electronics Designs Pvt. Ltd.

    PCI Data Acquisition Card receives high speed data in a serial form and transfers to storage media or other like devices through 64-bit 66MHZ PCI PC interface. The card supports two serial channels each up to 105 MHz serial data rate. Very useful for real-time high speed data transfer from external devices or data collection equipments and store into HDDs attached to PCs.

    Product Name: Data Acquisition / Portable Data Acquisition & Recorder System
    Company: Dexcel Electronics Designs Pvt. Ltd.

    The portable data acquisition system form Dexcel is a very small from factor CPU with a PCI based data capture card. The PCI card can be customized as per user needs or any user board can be plugged on to the PCI card for data capture. The PCI card supports both data capture and data playback. The captured data is stored on the hard disks. The complete unit can work from the internal battery. The unit is controlled with the hand held/ desktop USB LCD.

    Product Name: Encryption / 3DES VHDL/RTL IP Core
    Company: Dexcel Electronics Designs Pvt. Ltd.

    Dexcel provides engineering services to customers that are creating products for the Media over IP market.In order to reduce the engineering time and thereby reduce the time to market for our customers, Dexcel is continuously creating design objects that can be quickly re-engineered and integrated into customer defined projects. The ProStax™ series is an evolving set of software modules that comply with protocol standards defined by ITU-T, IETF, etc. The DesignCore Series are IP cores developed in VHDL which can be easily targeted to various FPGAs and ASICs to quickly realize Media over IP products for our customers. DesignCore-3DES is Dexcel's implementation of the Triple DES Encryption Algorithm.

    Product Name: Encryption / DES VHDL/RTL IP Core
    Company: Dexcel Electronics Designs Pvt. Ltd.

    The Data Encryption Standard (DES) algorithm is a block cipher that transforms 64-bit data blocks under a 64-bit secret key, by means of permutation and substitution. It is officially described in FIPS PUB 46. A new encryption algorithm, Triple DES was proposed as an alternate to DES.

    Product Name: Single Board Computer / ARM Based
    Company: Dexcel Electronics Designs Pvt. Ltd.

    Dexcel Spark SBC is a generic Single Board Computer using Cirus Logic 9302-IQ2 processor with ARM920T based system on a chip. The SBC is loaded with Linux kernel ver 2.6 for application software and system management. This SBC is targeted to a variety of applications in the automation, data capture and media centric tasks. The SBC can be plugged on to custom developed boards for distributed data acquisition boards.

    Product Name: Single Board Computer / FPGA Based PC104 SBC
    Company: Dexcel Electronics Designs Pvt. Ltd.

    PC104 and PC104 plus are very common form factor PCBs used for industrial application. Dexcel has designed a Single Board Computer (SBC) which is based on FPGA, which can interface with PC104 and PC104 plus boards. With this board, user can make use of the on-board FPGA logic for user defined / custom application , and also make use of standard PC104 and PC104 plus add-on boards for added functionality. With this flexibility user can reach the target market in a very short time span.

    Product Name: Sherlock - Automated Design Analysis Tool
    Company: DfR Solutions

    DfR Solutions is proud to provide their customers with a robust analysis package right out of the box. The greatest potential for improvement is also when the cost is lowest: before the first prototype is ever built. DfR has taken the most requested qualification tests and packaged them for the designer.

    Product Name: Dialogic® SPCI2S and SPCI4 SS7 Boards
    Company: Dialogic

    The Dialogic® SPCI2S and SPCI4 SS7 boards are entry-level products offering support for up to 4 SS7 links and 4096 ISUP circuits.  The SPCI2S and SPCI4 combine SS7 protocol support with up to four digital line interfaces (T1/E1/J1) and an H.100 PCM highway.  

    Product Name: Card Racks
    Company: Douglas Electronics, Inc.

    Chassis mount card racks; 6 card slots on .500" centers. Pre-drilled mounting flange on bottom of rack. Racks are compatible with Douglas DE-1 and DE-3 series breadboards. 44-pin connectors, can be pop riveted to the backs of the racks and wired to form a mother board. Specify number of connectors desired when ordering.
    For DE-1 series boards CR-6-DE-1 $21.20
    For DE-3 series boards CR-6-DE-3 $21.20

    Product Name: Professional Layout
    Company: Douglas Electronics, Inc.

    A very mature product that has enjoyed continuous development and support since it's debut in 1984, Professional Layout is a rich suite of printed circuit board design tools that uses the graphical excellence of the Macintosh to bring true WYSIWYG performance to electronics CAD/CAM. That same level of performance is now offered for Windows users. The program supports any number of circuit board layers (limited only by available memory), a working area of 32" x 32", a database resolution of 0.001" and the ability to switch back and forth between inch and metric units easily, on the fly.

    Product Name: ADAC250
    Company: DSPECIALISTS Digitale Audio- und Messsysteme GmbH

    The ADAC250 FPGA mezzanine card (FMC) is designed around the high-performance A/D and D/A conversion technology from Texas Instruments — it integrates one dual, 14-bit, 250 MSPS analog-to-digital converter (ADS62P49) and a dual, 16-bit, 1 GSPS digital-to-analog converter (DAC5682Z; also capable of a 2–4× interpolation mode). Combined with multiple clocks and synchronization modes, the ADAC250 is at its best in DSP applications such as software-defi ned radio (SDR), advanced telecommunications (MIMO systems, cognitive radios, beamformers, LTE, WiMAX), signal intelligence (SIGINT), radar, sonar, and medical imaging applications.

    Product Name: Measuring systems
    Company: DSPECIALISTS Digitale Audio- und Messsysteme GmbH

    Our DSP boards and algorithms are the starting point for various measuring systems. Whether you want to measure the velocity of industrial fumes, carry out gearbox vibration analyses or do acoustic measurements in concert halls, we have the suitable components or device to complete the measuring job at hand.

    Product Name: Memory module
    Company: DSPECIALISTS Digitale Audio- und Messsysteme GmbH

    The memory module offers an additional 2 GB of SDRAM to carrier VHS-ADCs and VHS-DACs.
    When installed on a carrier board, its eight ADC or DAC channels can easily be recorded or played
    back at full rate (input 105 MSPS, output 480 MSPS). What’s more, the FPGAs of VHS-ADCs and
    VHS-DACs can preprocess data before recording it through the selected channels of the module or
    post-process the data after playback from the module.

    Product Name: Nutaq 2x10GE SFP+
    Company: DSPECIALISTS Digitale Audio- und Messsysteme GmbH

    The 2×10GE SFP+ FPGA mezzanine card (FMC) is designed around the NetLogic Microsystems AEL2005 PHY, which interfaces to the FMC’s I/Os with the XAUI protocol and creates SFP+ 10 Gbps interfaces using four, 3.125 Gbps FPGA transceivers. The AEL2005 is a physical layer transceiver with an integrated electronic dispersion compensation (EDC) engine that complies with the IEEE802.3aq specifi cations.

    Product Name: Task Tiger (Beta)
    Company: Dyumnin Technologies

    Task management software for getting things done(GTD).

    Product Name: 90nm NEW ASICs
    Company: eASIC Corporation

    The eASIC Nextreme family drastically reduces development cost, and turn-around times compared to standard cell ASICs, while significantly reducing power consumption and unit cost for designs that start off as FPGAs.

    Product Name: easicopy ASIC Migration
    Company: eASIC Corporation

    easicopy ASIC provides OEMs with a seamless path from a eASIC Nextreme or Nextreme-2 NEW ASIC to a, cell-based, easicopy ASIC thereby enabling OEMs to further reduce device cost and power consumption, or increase performance.

    Product Name: ASIC Design
    Company: Easics NV

    Easics offers design services for both digital and mixed-signal chips: system-on-chip, ASIC, ASSP and structured ASIC. Being an independent design services company, Easics can provide you with unbiased technology and system architecture advice that perfectly matches your project requirements. Easics has worked with many different technology vendors (TSMC, UMC, LSI, etc.) and can thus leverage this experience for your project.

    Product Name: FPGA Design
    Company: Easics NV

    Easics offers design services for digital FPGAs. Being an independent design services company, Easics can provide you with unbiased technology and system architecture advice that perfectly matches your project requirements. Easics works with FPGA devices of all vendors, including the use of the IP provided by those vendors.

    Product Name: Crystal FLOW C/C++
    Company: EASYCODE GmbH

    EASYCODE is extending its range of tools for efficient embedded software development and analysis with the Crystal C/C++ tool set from SVG SARC. Crystal C/C++ is available in the versions Crystal FLOW and Crystal REVS with a selectable range of functions. Dependent upon your requirements and environment, Crystal C/C++ can be a valuable enhancement or alternative for your existing IDE.

    Product Name: Crystal Revs
    Company: EASYCODE GmbH

    EASYCODE is extending its range of tools for efficient embedded software development and analysis with the Crystal C/C++ tool set from SVG SARC. Crystal C/C++ is available in the versions Crystal FLOW and Crystal REVS with a selectable range of functions. Dependent upon your requirements and environment, Crystal C/C++ can be a valuable enhancement or alternative for your existing IDE.

    Product Name: EasyCODE 9 PLC
    Company: EASYCODE GmbH

    EasyCODE was one of the first development tools that provided a graphic development interface for procedural programming languages and systematically applied the benefits of Nassi-Shneiderman structure diagrams. EasyCODE PLC pursues the idea of structured programming, and in doing so intentionally incorporates a technology that has proven itself on countless projects and which today is as up-to-date and efficient as it has ever been. In the 1990s, SIEMENS was already offering an initial version that enabled SCL files to be generated from structure diagrams. Some of our customers are still using it to write their PLC programs even today.

    Product Name: Vishay: EBVchips - Genesis
    Company: EBV Elektronik GmbH & Co. KG

    Genesis is a complete power stage integrated on a module for single phase photovoltaic inverters. With 50 Amps and 600 V ratings is targeted for residential applications (2.5 to 6 KVA ).

    Product Name: Con­trollers
    Company: Eckelmann AG

    ECK­EL­MANN de­vel­ops and pro­duces con­trollers for ma­chine au­toma­tion. The close in­te­gra­tion of hard­ware de­vel­op­ment, man­u­fac­ture and test­ing guar­an­tees so­phis­ti­cat­ed func­tion­al­i­ty and sus­tain­able qual­i­ty.

    Product Name: I/O mod­ules
    Company: Eckelmann AG

    The three mod­el ranges FBM, LBM and XBM of­fer the ap­pro­pri­ate I/O mod­ules for the fast, safe and ap­pli­ca­tion-spe­cif­ic con­nec­tion of all ma­chine in­puts and out­puts.

    Product Name: Belledonne – LPE Flow Qualification
    Company: EDXACT SA

    • Accelerates the creation, update and delivery of PDK
    • Increases robustness of DK.
    • Compares different LPE tools.
    • Certifies the accuracy of different LPE tools.
    • Visualizes impact of different settings of LPE tools.
    • Finds bugs in LPE tools.
     

    Product Name: Jivaro
    Company: EDXACT SA

    • Speeds up simulation time, increases  accuracy and, reduces memory footprint.
    • Integrated into all major design flows, several graphical user interfaces
    • Used in production for memory, mixed-signal, analog, RF flows, timing.
    • Many customer references.

    Product Name: Printed Circuit Boards(PCB)
    Company: Eleclink Inc

    Our PCB manufacturing  and our PCB assembly manufacturing areISO9002 certified.  And provide RoHS Product. Many  years experience of PCB and PCBA manufacturing, and got IS014000 and UL certificates.


    Product Name: SORTmanager: Test Floor Management Applications
    Company: Electroglas, Inc.

    Expand SORTmanager with SORTware Higher Level Management Tools. SORTware is a suite of value-added, semiconductor industry specific applications and application modules. These tools are continually being developed and released in response to customer and industry needs. Each SORTware application can be used as purchased or customized using the TFMS scripting language.

    Product Name: SORTware: Higher Level Management Tools
    Company: Electroglas, Inc.

    Map Level Bin Monitor (MLBM)
    • Statistical Process Control
    • Allows process experts to implement process rules
    • Triggers built-in messaging to notify process owner when rule is violated.

    Product Name: ACPRD
    Company: Elektronikladen

    The main purpose of the ACPRD is to show, how the MC9S12DP256 MCU (microcontroller unit) can be used for a real-world industrial application, namely an Alarm Control Panel. The project is intended to help software developers and hardware designers understanding the MC9S12DP256 by demonstrating a large number of features of this new MCU.

    Product Name: USB08
    Company: Elektronikladen

    The USB08 Project demonstrates, how data can be transferred between a Microcontroller and a Windows-PC over the Universal Serial Bus (USB).

    Product Name: Si2-DR API
    Company: Elgris Technologies, Inc

    Si2-DR API is an extension of CFI-DR API specification and implementation. CFI-DR API covers Netlists. Si2-DR re-uses renamed CFI-DR functions to cover netlists. It has been extended to cover EDA Schematics and Symbols. A future release of Si2-DR API will include PCB/MCM designs and Footprints.

    Product Name: Enclosures & Components
    Company: Elma Electronic AG

    Elma manufactures tens of thousands of tooled components for enclosures which can be purchased individually or in kits for customer assembly.  We also can quickly and expertly modify these components to suit your specific application, please call to discuss your application.

    Product Name: Embedded BIOS® with StrongFrame® Technology
    Company: Eltan B.V.

    Embedded BIOS® with StrongFrame® Technology is the sixth evolution of Phoenix Technologies’ firmware SDK solution for embedded x86 designs. Working with Eltan, manufacturers can use the product for a customized Bios solution that meets their specific design requirements.

    Product Name: File System Filter Library
    Company: Eltan B.V.

    Jumpstart your File System Filter development by using our File System Filter Library.   We have created a Framework and a library of supporting routines that allow you to create a File System Filter driver without the usual learning cycles

    Product Name: TimingDesigner
    Company: EMA Design Automation, Inc.

    The timing's right. That's what designers expect and deserve. TimingDesigner® is the interactive timing analysis tool users trust to deliver fast and accurate results for timing critical designs. TimingDesigner is ideal for high-speed, multi-frequency designs where it is essential to accurately model and analyze signal relationships between devices on a board or between embedded functions on an ASIC or programmable IC. It can evaluate comprehensive sets of timing alternatives and provide direction to the most complex of timing challenges, enabling designers to manage and monitor timing margins through the design process.

    Product Name: XJAnalyser
    Company: Embedded JTAG Toolsmiths

    XJAnalyser is a visual analysis and debugging tool for devices in your JTAG chain. It provides instant chain verification as part of the simple 3-step set-up, and then gives you an interactive graphical view of the pins on your JTAG devices.    

    Product Name: NeoBit
    Company: eMemory Technology Inc.

    NeoBit is a programmable logic device offering the industry’s most silicon-proven path to embedded OTP and Pseudo-MTP (PMTP) functionality.

    Product Name: NeoBit HD
    Company: eMemory Technology Inc.

    OTP HD is a high-density, one-time programmable memory solution built upon eMemory’s proprietary NeoBit technology.

    Product Name: NeoBit HR
    Company: eMemory Technology Inc.

    NeoBit HR can be used as a multi-time programmable embeddable memory with limited endurance and full logic process compatibility. NeoBit PMTP provides flexibility for trimming, function selection and parameter setting applications without expensive or specialized technology demands.

    Product Name: NeoEE
    Company: eMemory Technology Inc.

    NeoEE is a single-poly embedded memory device offering the industry’s lowest NVM implementation cost at 100K program /erase cycles.

    Product Name: NeoFlash
    Company: eMemory Technology Inc.

    NeoFlash is a new simple, low-cost embedded flash device. By adopting innovative flash memory technology, NeoFlash can be embedded in a 0.18 um CMOS logic process with only 3 additional non-critical masks. Compared to floating gate flash technology, which requires a complex and expensive double poly process, the single poly architecture and reduced fabrication complexity of NeoFlash give it powerful advantages in the embedded flash category.

    Product Name: NeoFlash HD
    Company: eMemory Technology Inc.

    NeoFlash HD series is the full-featured, embedded flash memory solution for system-on-a-chip (SoC) applications such as MCUs, DSPs, cellular communications, smart cards, DVDs, and speech/voice ICs.

    Product Name: Product Line CST
    Company: EMS Dr. Thomas Wünsche

    The CAN modules of the CST product line are built for decentralized input/output in measuring, control and automation uses. Their compact and rugged structure with completely enclosed electronics allows the use not only in a control box but also in proximity of the process. The way of building in connection with fine clarity offers the possibility to implement decentralized control solutions consistently. Through the integrated microcontroller CST modules can perform preprocessing functions independently.

    Product Name: DXL222-1
    Company: Engineering Dataxpress, Inc.

    The DXL100™ ECS Schematic Translator is one of a series of optimized data links that is part of the DataXpress Integrator™ product line. The DataXpress Integrator was developed as a solution to the problem of moving design data from one step in the design process to another. This usually involves going from one EDA vendor’s tools to another’s. These tools are fundamentally different in terms of function and data formats.

    Product Name: DXL822-1
    Company: Engineering Dataxpress, Inc.

    The DXL100™ ECS Schematic Translator is one of a series of optimized data links that is part of the DataXpress Integrator™ product line. The DataXpress Integrator was developed as a solution to the problem of moving design data from one step in the design process to another. This usually involves going from one EDA vendor’s tools to another’s. These tools are fundamentally different in terms of function and data formats.

    Product Name: eSi-Modules
    Company: EnSilica Limited

    It enables low-risk and fast time-to-market hardware development without sacrificing differentiation, integration or flexibility. Combining a powerful dual-core ARM® A9 subsystem running embedded Linux together with the Xilinx Series-7 FPGA fabric means you can design smarter systems demanding real time hardware performance.

    Product Name: ESI-1010
    Company: Ensphere Solutions Inc.

    10 Gbps Shunt Laser Diode Driver

    Product Name: ESI-1110
    Company: Ensphere Solutions Inc.

    12-Port 10 Gbps Shunt Laser Diode Driver

    Product Name: Optima
    Company: Entasys Design, Inc.

    With semiconductor process technology scaling into nanometer regime, SoC (System-on-Chip) requires more robust power network than ever. However, due to the absence of proper design automation solution, every modification of pad configuration causes extra design iterations or requires excessive power pads increasing chip size. OPTIMA is an optimal pad configuration solution to minimize painful design iterations.

    Product Name: Pillar-DP®-SVP
    Company: Entasys Design, Inc.

    Pillar-DP®-SVP is a comprehensive pre-RTL silicon virtual prototyping (SVP) solution, including micro architecture level power and area estimation, hierarchical floorplanning, package aware IO pad configuration, and automatic power network prototyping. In addition to the SVP capability, the chip level IP integration feature and the constraints interface feature to the integrated chip (IC) implementation help designers achieve the fist-silicon-success and the time-to-market.

    Product Name: EScala Design Platform
    Company: Esencia Technologies

    EScala is a design platform that accelerates the implementation of complex, compute intensive algorithms in SoC/ASSP/FPGA. It targets low power deeply embedded applications with high performance and bandwidth requirements, conventionally reserved to ­xed function logic implemented with RTL. EScala uses C/C++ as a design entry language and automatically generates application speci­c cores and allows to optimize and scale the generated core to best ­to the application’s area, low power and performance pro­le.

    Product Name: Security-Box
    Company: eXept Software AG

    The Security Box of eXept Software AG stores cryptographic certificates and secret keys and protects them from manipulation and theft. The master key of the Security Box is encrypted via a USB token, so that the keys that are saved in the Security Box cannot be utilized without the respective token. Data backups of the Security Box are also encrypted with this master key. The Security Box can be placed in a safe and its door shall be safeguarded via door contacts. The keys cannot be read from the Security Box without decoding; all operations which require a key - such as decoding and encoding, creation and validation of signatures - operate within the Security Box. Keys that have been created in the Security Box can be written to USB tokens or on chip cards if necessary.

    Product Name: ecSIM
    Company: ExpertControl GmbH

    ecSIM is a graphical user interface for independent simulation programs (standalone EXE) generated from Simulink models.

    Product Name: ecUTILITIES
    Company: ExpertControl GmbH

    The ecUTILITIES™ Toolbox constitutes a powerful extension for Matlab® and provides interactive, flexible and high quality tools helping engineers to save time for development, calibration and more.

    Product Name: NP-4
    Company: EZchip Technologies Ltd.

    NP-4 is a 100-Gigabit network processor that features integrated hierarchical traffic management, OAM processing offload and enables direct connection from the line card to Ethernet-based switching fabrics. The NP-4 provides groundbreaking levels of integration and functionality for equipment vendors building the next generation of Carrier Ethernet Switches and Routers (CESR). It provides a total of 100-Gigabit throughput and features a 100-Gigabit port, 40-Gigabit port, ten 10-Gigabit ports and twenty-four 1-Gigabit Ethernet ports.

    Product Name: FV264
    Company: FastVDO LLC

    As a leading provider of software and hardware based H.264/AVC video solutions, FastVDO offers cost-effective and well-suited technology to our customers that enable them to achieve measurable improvements in their business performance.

    Product Name: Advanced Flexibilis Ethernet Controller (AFEC)
    Company: Flexibilis Oy

    The Advanced Flexibilis Ethernet Controller (AFEC) is a triple-speed (10Mbps/100Mbps/1Gbps) Ethernet controller IP block that can be employed with programmable hardware and ASICs. Together with an Ethernet Physical layer device, AFEC provides the functionality of an Ethernet Network Interface Controller. For connecting to an Ethernet PHY device, AFEC implements a standard MII/GMII interface.

    Product Name: Flexibilis PTP Protocol Stack
    Company: Flexibilis Oy

    The Flexibilis PTP Protocol Stack is an IEEE 1588-2008 compliant implementation of the Precision Time Protocol for clock synchronization over IP and Ethernet. The implementation is written in pure C language, and it is ready to be used in Linux based systems. Hardware and operating system specific details are hidden behind an abstraction layer, so that porting to other operating systems and environments is relatively easy.

    Product Name: HSR/PRP Supervision
    Company: Flexibilis Oy

    The Flexibilis HSR/PRP Supervision is an IEC 62439-3:2011 compliant implementation of the HSR and PRP Supervision Protocol Stacks. HSR/PRP Supervision generates, transmits, receives and processes HSR and PRP supervision frames. Based on the information in the supervision frames received, HSR/PRP Supervision updates NodesTable that contains information on the other HSR/PRP nodes in the network. This information can be used by other entities including network management and monitoring systems. HSR/PRP Supervision itself does not use the information it collects.

    Product Name: Allegro
    Company: FlowCAD Schweiz AG

    Implementing design intent with collaborative, constraint driven power. Allegro PCB design solutions enable shorter, more predictable design cycles with constraint driven flow, from concept to manufacturing.

    Product Name: OrCAD
    Company: FlowCAD Schweiz AG

    Full-featured, scalable PCB design. Cadence OrCAD technologies comprise a complete, cost-effective PCB design solution, from design capture to final output. To successfully meet project goals, PCB designers and electrical engineers need powerful, intuitive, and integrated technologies that work seamlessly across the entire PCB design flow. Cadence® OrCAD® solutions offer fully integrated front-end design, analog/signal integrity simulation, and place-and-route technologies that boost productivity and shorten time to market.

    Product Name: Timing Designer
    Company: FlowCAD Schweiz AG

    TimingDesigner® is the industry standard tool for interface timing design. It provides an easy to use and intuitive method for defining and analyzing interface timing requirements. TimingDesigner can generate SDC timing constraints from a timing diagram. This enables users to visually define design requirements and then automatically generate SDC to drive place and route.

    Product Name: 10 Gb/s Ethernet Media Access Controller(XMAC)
    Company: Flowgic Inc.

    XMAC core from Flowgic Inc. is a full-duplex, 10-Gigabit Ethernet Media Access Controller(MAC) IP designed to meet IEEE 802.3ae-2000 specification. XMAC is an efficient, flexible and robust implementation of the MAC and RS layers.

    Product Name: AXI Bus Extender IP Core
    Company: Flowgic Inc.

    AMBA AXI from ARM Holdings is an high performance on-chip bus architecture. Wide datapath versions of of the AXI are not amenable to extensions beyond a single chip/FPGA. Flowgic's AXI Bus Extender(ABE) core makes it possible to extend AXI bus across two chips with very few package pins. ABE core is built using Flowgic's Interlaken Controller(IL) core, which is a flexible, high-bandwidth, packet transport mechanism for chip-to-chip communication.

    Product Name: onTAP DLL
    Company: Flynn Systems Corp.

    Whether plugging into a test executive, or running as a plug-in to your own interface, onTAP’s DLL can be linked to and run from third party test executives such as, National Instruments’ LabVIEW™.  Flynn Systems provides GUI demo programs written in C and Visual Basic showing you how to link the onTAP DLL to your test executive.   

    Product Name: onTAP Serializer and GPIO Board
    Company: Flynn Systems Corp.

    The need to organize and test multiple boards or JTAG chains individually is a common challenge for engineers.  Flynn Systems has created the onTAP Serializer and GPIO Board as a cost effective utility board to deliver onTAP users the organization and flexibility required to easily test and program multiple JTAG chains.

    Product Name: TAP CONNECT JTAG Cable – onTAP’s High Speed Cable
    Company: Flynn Systems Corp.

    The TAP CONNECT JTAG test and programming cable is the latest piece of boundary scan test hardware from Flynn Systems, providing a dual channel, 28.8 MHz link between onTAP and your application(s), using flying leads, Xilinx Ribbon Cable, or Altera type adaptors.

    Product Name: FlexRay MCU
    Company: Fujitsu Microelectronics

    Fujitsu launched the MB91F465XA, next-generation microcontroller with embedded FlexRay™ interface in January, 2007. This MCU enables implementation of the FlexRay protocol in a single-chip solution without the need for companion devices. Fujitsu is growing the family of FlexRay MCUs, for the F²MC-16FX Family in addition to the FR Family.

    Product Name: DisplayPort Analysis Probes
    Company: FuturePlus® Systems

    The FS4439 (DP 1.2) and FS4430 (DP 1.1) are logic analyzer Analysis Probes that non-intrusively probe the High Speed Main Link and the Auxiliary channel of a DisplayPort via a high impedance tap. The FS4439 and FS4430 connect to the system under test with various probe adapters (FS4430  FS4439) and monitor traffic in real time. Included software decodes and displays DisplayPort traffic using a Agilent logic analyzer.

    Product Name: GEB PCI Express Family Overview
    Company: geb enterprise s.r.l.

    The Geb PCI Express cards family add to the PCI Express architecture the powerfull of Altera FPGA that allow a flexible I/O system. The I/O speed capability goes up to 260Mbytes/sec (Full Duplex Read/Write DMA Burst Access).

    Product Name: GEB VME RDK (Rapid Development Kit)
    Company: geb enterprise s.r.l.

    The VME Bus family have the target to make available at low cost the resources to build a fast prototype of a VMEmaster/slave/controller subsytem. The modularity of the resources, both hardware board and firmware VHDL IP allows to compose many types of application with a low effort and cost.

    Product Name: ProcSoC systems
    Company: GiDEL

    As a module of the ProcSoC™ Verification System the ProcSoC10™ provides scalability for multiple systems to be interconnected and used to verify SoC designs with 360 million+ gates. GiDEL's ProcSoC10 is itself a modular and scalable ASIC verification system.

    Product Name: GigaTest Engineering Services
    Company: GigaTest Labs

    GigaTest Labs is an expert in High Bandwidth product development. We pioneered the use of RF techniques in Signal Integrity engineering, and have the experience and resources to handle the most challenging engineering problems. We have a state-of-the-art laboratory with the most recent measurement and probing equipment for high frequency testing. We also have the latest versions of the Agilent's ADS software for RF and high speed digital design, simulation and modeling. Our engineering staff includes some of the industry's most well-respected names, and has over 130 man-years of experience in high frequency and signal integrity engineering. Whether your application is a Bluetooth package, OC-768 backplane, Infiniband connector or DDR module, GigaTest can help you measure, model, simulate or troubleshoot it. We can even help you design it.  

    Product Name: Signal Integrity Measurement Systems
    Company: GigaTest Labs

    As an Agilent Technologies Solution Partner, GigaTest Labs offers fully configured measurement systems for high bandwidth signal integrity characterization, consisting of Probe station, Vector Network Analyzer and ADS simulation software.  

    Product Name: CE-ATA eVC
    Company: Globetech Solutions

    The Consumer Electronics Advanced Technology Attachment (CE-ATA) eVC is a complete verification environment capable of verifying CE-ATA compliant Host or Device implementations. Based upon a flexible architecture, the CE-ATA eVC can be instantiated in several different configurations. Use the Device Agent to verify a CE-ATA Host design, the Host Agent to verify a CE-ATA Device design, or a monitor-only configuration to ensure correct operation of a complete-HDL environment.

    Product Name: IEEE 1149.1 (JTAG) eVC
    Company: Globetech Solutions

    The JTAG eVC is a complete verification environment based on the IEEE 1149.1-2001 (JTAG) standard. From developing a JTAG TAP controller to designing a complete chip-level test architecture, the JTAG eVC is a valuable tool for identifying design bugs, emphasizing protocol compatibility issues and ensuring smooth interoperability of testability features.

    Product Name: IEEE 1500 (SECT) eVC
    Company: Globetech Solutions

    The IEEE 1500 Standard for Embedded Core Test (SECT) is a newly released standard defining the blueprint for building complex test infrastructures within large SoCs. The IEEE 1500 SECT comprises a comprehensive set of guidelines for building such an infrastructure, including the hardware architecture, information model (implemented in the IEEE P1450.6 Core Test Language proposal) and definitions of levels of compliance. The eVC provides automatic vector generation and control signal manipulation while monitoring all test and functional inputs and outputs for correct protocol behavior. The eVC collects coverage metrics on the functionality of the test logic that has been exercised and is used to identify test plan holes and estimate time to closure.

    Product Name: IrDA eVC
    Company: Globetech Solutions

    The Infrared Data Association (IrDA®) interface eVC is built around the IrDA Physical Layer Specification which can be used with any IrDA SIR/MIR/FIR device. The eVC provides a powerful verification environment to help designers either implement or integrate an IrDA core in conformance to the IrDA 1.0 SIR and 1.1 MIR/FIR Physical Layer specifications. The eVC’s extended capabilities make it easy to exercise a variety of designs-under-test, providing full metrics for error conditions and functional coverage.

    Product Name: UART 16x50 eVC
    Company: Globetech Solutions

    The UART 16x50 eVC is a complete device-level verification environment capable of validating industry standard 16550 through 16950 A-D UART designs. The UART 16x50 eVC is a core or module level eVC. It includes a 16x50 reference model which allows it to fully track activity in the device, providing full functionality coverage including protocol & data interface cross-checking as well as internal register coverage.

    Product Name: UART eVC
    Company: Globetech Solutions

    The UART eVC is a universal, highly reusable verification component, providing advanced capabilities for generating UART frames, driving and monitoring a UART interface, detecting errors and estimating functional coverage. Adopted by companies worldwide as a building block for reusable verification platforms, it can be integrated in a variety of testing scenarios involving a UART peripheral. It makes no assumptions about internal device architecture; instead, it focuses on driving traffic to the UART interface of the device-under-test (DUT) and observing its behavior. This makes it applicable to virtually any kind of UART DUT.

    Product Name: X86/Pentium Windows Native Family
    Company: Green Hills Software, Inc.

    The Green Hills Optimizing Compiler for x86/Pentium utilizes a common code generator with architecture-specific optimizations. Each supported x86/Pentium model has its own particular pipeline and instruction set characteristics.

    Product Name: API/Hardware Explorer
    Company: GÖPEL electronic GmbH

    G–API (GOEPEL electronic Application Programming Interface) represents therefore a special software interface which is supporting different GOEPEL electronic hardware and which allows the users to embed it into their own applications. To get further and more detailed function description for working with the programming interface please refer to the manual of the corresponding device or contact us directly.

    Product Name: OptiCon X-Line 3D
    Company: GÖPEL electronic GmbH

    3D in-line X-ray inspection system for maximum fault coverage using digital tomosynthesis with outstanding inspection speed.

    Product Name: RM9200
    Company: HCC-Embedded

    Atmel’s RM9200® Atmel ARM920T is a 32-bit RISC processor with 16KB instruction and 16KB data cache memories. HCC supports this device by providing advanced storage, communications and bootloader software with high performance and easy integration.

    Product Name: JESD204B PCS IP Core
    Company: HDL design House

    The JESD204B Physical Coding Sublayer (PCS) IP Core enables both transmission and reception of data via a configurable number of Lanes to the SerDes interface, while guaranteeing data alignment and frame synchronization. The IP Core is responsible for frame generation, encoding, and scrambling for data transmission, as well as decoding, frame recovery, lane alignment and descrambling on data reception. HIP 600 is fully compatible with the JEDEC JESD204B specification.

    Product Name: HEXit
    Company: hse-electronics GmbH

    Checks the placement of memory, program code and data, the address distribution and looks for multiple use of addresses. The results will be graphically displayed so a quick overview is guaranteed. The content of each address can be displayed by different colours each (byte -or word orientated),

    Product Name: HY5PS561621AFP
    Company: Hynix Semiconductor Inc.

    Read and write accesses to the DDR2 SDRAM are burst oriented; accesses start at a selected location and continue for a burst length of four or eight in a programmed sequence. Accesses begin with the registration of an Active command, which is then followed by a Read or Write command. The address bits registered coincident with the active command are used to select the bank and row to be accessed (BA0-BA1 select the bank; A0-A12 select the row).

    Product Name: S6 - Flash Memory Controller
    Company: Hyperstone GmbH

    The Hyperstone S6 Flash Memory Controller together with provided application and flash specific firmware offers an easy-to-use turnkey platform for high reliability and performance flash solutions compliant to MMC4.2 and SD 2.0 interfaces.

    Product Name: Fusiv® Vx185
    Company: Ikanos Communications

    Ikanos’ Fusiv® Vx185 and Vx183 chipsets are high performance G.Vector-compliant communications processors designed specifically for the next-generation of services gateways.

    Product Name: Ikanos Velocity™
    Company: Ikanos Communications

    The Ikanos Velocity family of low-power, full-featured broadband A/VDSL access chipsets provide up to 100 Mbps symmetric bandwidth and operate at an unprecedented sub 1 Watt (W) per port power consumption. Both chipsets support 8a/b/c/d, 12a/b, 17a and 30a VDSL2 profiles as well as ADSL2+, ADSL2 and ADSL standards.

    Product Name: DEV - Virtual Platform Development and Simulation
    Company: Imperas, Inc.

    The Imperas Developer products consist of tools, models and infrastructure components critical for the high quality, rapid development and verification of embedded software, utilizing virtual platforms. The Developer products provide the necessary capabilities to develop platforms, including software simulation capability to execute embedded code on the platforms.

    Product Name: M*SDK - Advanced Multicore Software Development Kit
    Company: Imperas, Inc.

    The focus of the Imperas products is to save engineering time in the development of embedded software, primarily achieved by making the engineering process significantly more efficient through the use of high-performance simulation and automated, powerful tooling.

    Product Name: IMPINJ RFID READER ANTENNAS
    Company: Impinj Inc.

    At Impinj, we define accurate, reliable, and adaptable solutions as systems of integrity. A system of integrity produces the consistently reliable data demanded as the foundation of any business system. To meet this requirement, high-performance RFID tag chips and RFID readers are a given, but RFID antennas play an equally important role. Reader antennas with characteristics optimized for end-user applications enable the entire RFID system and play a critical role in ensuring that the system operates dependably and accurately.

    Product Name: SPEEDWAY® REVOLUTION RFID READER
    Company: Impinj Inc.

    Application environments are dynamic. Everything from RF interference, tag quantity, and ambient RF noise to building materials near an RFID installation affect system performance. Most users configure their RFID readers for worst case scenarios, often compromising best performance in the process.

    Product Name: STP™ SOURCE TAGGING PLATFORM
    Company: Impinj Inc.

    Impinj built upon four years of intensive research and development, and successful pharmaceutical industry high-volume deployments to create STP. As the only platform optimized for large scale, RFID encoding, Impinj STP provides the building blocks for retail brand owners, consumer product manufacturers, service bureaus, packaging suppliers, and solution providers to deliver complete source tagging solutions.

    Product Name: CoValidator™ HDL Test Bench Generator
    Company: Impulse Accelerated Technologies

    CoValidator generates HDL compatible with all IEEE-compliant VHDL simulators, and also generates scripts for popular HDL simulators, allowing you to generate HDL test benches and launch simulation with just a few keystrokes. Catch errors before place-and-route, saving hours, days or even weeks of development time. Generate an HDL test bench, data files, and simulator scripts for hardware validation and hardware/software equivalency checking.

    Product Name: ICLys
    Company: InfiniScale®

    Advanced technology nodes Process variability becomes the key challenge for analog IC designers to easily reach targeted specifications while controlling design cycle time and production yields. Designer needs to run thousands or more Monte Carlo simulations. Fast Monte Carlo becomes necessary but unfortunately not sufficient!

    Product Name: Ingenuity Engine
    Company: Ingenuus Software Inc.

    The Ingenuity Engine powers the Process Orchestrator. It acts behind the scenes to bring together all the necessary components that make the Process Orchestrator so powerful.

    Product Name: Process Modeling
    Company: Ingenuus Software Inc.

    The Ingenuity Engine brings together all the tools needed to define and map a process. It also includes the tool to create business rules, and modify end user screens. Unlike other BPM products, when you create a process in Ingenuus, you are actually creating a new application.

    Product Name: cChicoPlus
    Company: Innovative Integration

    ChicoPlus is loaded with I/O features that make the card ideal for a large variety of jobs. Each ChicoPlus may host two OMNIBUS I/O modules, which offer multichannel analog and digital I/O suitable for the most demanding applications.

    Product Name: Serial I/O
    Company: Innovative Integration

    The Serial I/O module is an open-platform for implementing custom digital interfaces and hardware-assisted processing between the DSP on the host board (Modular or Solomente Series DSP board) and external hardware.

    Product Name: AETHER-2.5GS OC-3/12/48 ADM
    Company: INTEC Systems, Inc.

    The AETHER-2.5GS is a single-chip implementation of an STS-48/STM-16 LTE/MSTE, with additional capabilities to support grooming, configuration and performance monitoring functions.  This “single device solution” complies with SONET/SDH standards and specifications, including ANSI T1.105, Bellcore GR-253-CORE, ITU-T G.707 and G.783.

    Product Name: RDS-2.5GS Development System Board
    Company: INTEC Systems, Inc.

    The RDS-2.5GS (see Figure 1) serves as a “fast track” developing tool for designers to achieve a much shorter design cycle in implementing Next Generation Equipment using SONET/SDH transport.  At the center of the system is the AETHER-2.5GS single-chip implementation of an OC-3/12/48 Add-Drop Multiplex, with additional capabilities to support bandwidth grooming, configuration and Path Layer performance monitoring functions.

    Product Name: DESIGN AUTOMATION PRODUCTS
    Company: Intercept Technology Inc.

    These products enable corporations to automate seamless flows for design verification, drawing generation, and contract manufacturing output generation. Intercept's multi-faceted Design Automation products unite powerful innovations in global design technology to provide a flexible strategy for cycle time and cost reduction. All products are supported on HP-UX, Linux, Solaris, and Windows 2000/XP platforms.

    Product Name: IC-SER-PCId
    Company: INTERFACE CONCEPT

    IC-SER-PCId is powered by a MPC8270, being part of the PowerQUICCII processor family. This embedded processor couples a 603e core with a RISC communication processor and three Fast Ethernet controllers.

    Product Name: Vega HEVC
    Company: Interra Systems, Inc.

    Vega HEVC is the most in-depth and reliable file-based media analyzer that brings complex HEVC information in simple visuals. The analyzer makes analysis of the coded information easy, intuitive, and comprehensive. Vega HEVC features includes complete parsing and decoding, frame by frame navigation, analytical graphs, H.264 and HEVC encoding comparison, powerful reporting, and error messages at all structural levels. Vega HEVC leverages industry-proven Interra technologies and multi-core processing to deliver efficient, high-performance analysis.

    Product Name: System on Chip
    Company: Intrinsix Corp.

    "Integrated circuit density doubles every eighteen months." Moore's Law To overcome the challenges and realize the opportunities presented by Moore's Law, the industry is focusing its attention on the emerging Systems-on-a-Chip (SoC) design methodology which incorporates pre-designed components (virtual components), also called SoC Intellectual Property (SoC-IP).

    Product Name: SimDE™ IBIS Validator Release 201210
    Company: IO Methodology Inc.

    I/O Buffer Information Specification (IBIS) is the professionally respected behavioral model format for High-Speed Signal Integrity simulations. It is the ALL-IN-ONE standard modeling format with fast simulation, interoperability and IP protection for SI Analysis.

    Product Name: SimDE™ MODEL V4.2 Release 201309
    Company: IO Methodology Inc.

    Simulation is becoming increasingly important for High-Speed system designs. It can help optimize your design performance, reduce your design cycle, lower your prototype cost and accelerate your design to the market. Electrical I/O modeling is the starting point for your advanced chip and system simulations. It enables faster and more accurate simulations.

    Product Name: MSP1-PON Core IEEE 802.1ae (MACsec) Security Processor Core
    Company: IP Cores, Inc.

    Implementation of the new LAN security standard IEEE 802.1ae (MACsec) requires the NIST standard AES cipher in the GCM mode for encryption and message authentication, as well as header parsing and formatting operations on the transmitted and received packets. The MSP1-PON core is tuned for Passive Optics Networks (PON) IEEE 802.1ae applications at the data rates of 10-100 Gbps.

    Product Name: Ultra-Compact Advanced Encryption Standard (AES, FIPS-197) Core
    Company: IP Cores, Inc.

    The AES core implements Rijndael cipher encoding and decoding in compliance with the NIST Advanced Encryption Standard. It processes 128-bit data blocks with 128-bit key (a 256-bit key version is available).

    Product Name: J1 - Dolby Digital/AC-3/MPEG Audio Decoding Core
    Company: Jacobs Pineda, Inc.

    The J1 is a core cell design of an application specific signal processor which performs both Dolby Digital/AC-3 and MPEG audio decompression in a single design. The J1 is capable of decoding all AC-3 bitstreams with full support for bitstreams encoded with 5.1 channels and data rates of up to 640kb/s. The J1 downmixing capability produces stereo output in either normal or Pro-Logic compatible modes, making it ideal for DVD and set-top applications.

    Product Name: J5 - 3-D Audio Processor
    Company: Jacobs Pineda, Inc.

    The J5 is a core cell design of an application specific signal processor which performs both Trusurround(TM) and SRS® 3-D audio virtualization processing in a single design. The 3-D processing allows users to enjoy benefits of a multi-channel sound source with only two reporduction channels.  For Dolby Digital® (AC-3) sources, the J5 accepts full 6-channel PCM inputs and performs the 3-D processing to produce output Left/Right signals.  Similarly, for decoded ProLogic(TM) sources, the J5 accepts a 4-channel PCM input (L,C,R,S) and produces the same stereo output.

    Product Name: JDA1 - Multi-rate Audio DAC/PLL Core
    Company: Jacobs Pineda, Inc.

    The JDA1 is a digital-to-analog converter core cell suitable for all high quality audio and multimedia applications. The JDA1 accepts 24-bit PCM input at one of four selectable standard audio sample rates to produces stereo analog outputs. The JDA1 internally generates the audio sample clocks from a single 27MHz clock input, which would typically be derived from the 27MHz video/STC frequency available in MPEG based systems.

    Product Name: Architectural Modeling App
    Company: Jasper Design Automation, Inc.

    Architects and designers specify high-level functions or whole protocols that become the basis for the design implementations. Such specifications are often represented in natural language documents, waveform diagrams, and transition tables that capture the relationship between inputs, outputs, and state transitions of the protocol. Often, however, the specs themselves are complex and can be riddled with errors and inconsistencies because it is very difficult to verify the global interaction between the individual specifications and requirements.

    Product Name: Design Coverage Verification App
    Company: Jasper Design Automation, Inc.

    For years, formal users have struggled for ways to report their progress to simulation-centric managers. While the discovery rate of critical bugs is obviously a helpful metric, the bug rate itself is a very coarse measurement that doesn’t express the true value of the results obtained from fully proven or bounded proofs. Formal tool users themselves could also benefit from formal-specific coverage metrics to protect against the potential over-constraint problem and eliminate false confidence in design correctness, as well as have an empirical measurement of the ROI of their formal verification effort.

    Product Name: Intelligent Proof Kits and Verification IP
    Company: Jasper Design Automation, Inc.

    The Jasper Intelligent Proof Kits and Verification IP solutions enable SoC design teams to accelerate verification by quickly and exhaustively certifying standard protocols such as the latest AMBA 4 (AXI 4, ACE, API, APB) PCIe, DDR, LPDDR, OCP, etc.  The Jasper generated protocol related properties allow early exploration and verification of protocol specification and are optimized for formal.  They also plug seamlessly into the simulation environment.The solutions can be used seamlessly with the JasperGold Formal Property Verification App to formally prove the embedded properties, thereby exhaustively verifying that the design meets the protocol specification. Intelligent Proof Kits eliminate the need to manually write properties, which require in-depth understanding of the protocol specification.

    Product Name: X-Propagation Verification App
    Company: Jasper Design Automation, Inc.

    The semantics of ‘X’ are language and tool dependent. In RTL design, ‘X’ tells the synthesis tool that it doesn't matter whether a 0 or 1 is assigned during logic optimization and in verification (i.e. ‘X’ is a “don’t care”). But in simulation, ‘X’ tells the simulator that a signal value is “unknown”. This mismatch in semantics and incomplete test vectors in simulation can hide bugs that are likely to show up in silicon no matter how careful you are about considering “X optimism” or “X pessimism”.

    Product Name: Circuit design
    Company: Jedat Inc.

    Circuit design environment for simulation, layout design and LVS verification.
    • Integrated design and verification environment for circuit entry, simulation execution control and waveform measurement
    • 2D array instance definition corresponding to FPD specific circuit
    • Parametric definition of parasitic wire effective model and back annotation I/F
    • Supports shortcut keys and stroke commands

    Product Name: USB Host Stack
    Company: Jungo Ltd

    Deployed in numerous devices across a wide spectrum of industries, USBware Host software is the world’s most mature and extensive embedded USB host stack. Jungo’s extensive experience and leadership in embedded connectivity technologies make this product the choice of the world’s top chipset vendors and consumer electronics device manufacturers. USBware Host enables the use of multiple USB classes on a wide variety of embedded hardware platforms and its modular design facilitates the seamless introduction of USB host functionality to any current and future product.

    Product Name: Archer AIM
    Company: KLA-Tencor Corp.

    Archer AIM targets new standards for lithography process control equipment for 65-nm and beyond. An industry first, Archer AIM leverages a new grating-style technology to significantly reduce the measurement uncertainty associated with traditional overlay metrology for sub-100-nm design rules.

    Product Name: eDR-52xx Series
    Company: KLA-Tencor Corp.

    KLA-Tencor’s eDR-52xx wafer defect review systems capture high resolution images of wafer defects detected by inspection tools. These images enable defect classification, helping chipmakers to identify systematic defect sources and resolve yield issues. The latest addition to the eDR-52xx series, the eDR-5210S e-beam wafer defect review system, introduces reticle defect review (RDR) and critical point inspection (CPI) modes, furthering the platform’s ability to identify systematic defects from various sources.

    Product Name: GAL20RA10
    Company: Lattice Semiconductor Corp.

    The GAL20RA10 combines a high performance CMOS process with electrically erasable (E2) floating gate technology to provide the highest speed performance available in the PLD market. Lattice Semiconductor’s E2CMOS circuitry achieves power levels as low as 75mA typical ICC which represents a substantial savings in power when compared to bipolar counterparts.

    Product Name: ispGAL22V10AV/B/C
    Company: Lattice Semiconductor Corp.

    The ispGAL22V10A is manufactured using Lattice Semiconductor’s advanced E2CMOS process, which combines CMOS with Electrically Erasable (E2) floating gate technology. With an advanced E2 low-power cell and full CMOS logic approach, the ispGAL22V10A family offers fast pin-to-pin speeds, while simultaneously delivering low standby power without requiring any “turbo bits” or other traditional power management schemes.

    Product Name: ispGDX
    Company: Lattice Semiconductor Corp.

    EE CMOS
    Architecture: 80 x 80 to 160 x 160 programmable switch matrix
    Basic cell type: Combinatorial/ latched/ registered I/O with individual three-state and polarity control
    Programmability: I/O cells, ISP
    Max. Circuit Density (gates/bits of RAM): n/a

    Product Name: ispXPLD 5000MX
    Company: Lattice Semiconductor Corp.

    The ispXPLDTM 5000MX family represents a new class of devices from Lattice Semiconductor called eXpanded Programmable Logic Devices (XPLDs). These devices are built around a new building block, the Multi-Function Block (MFB). These blocks can be individually configured as SuperWIDETM (136-input) logic, single- or dual-port memory, FIFO, or CAM depending on the users' application.

    Product Name: LatticeXP2
    Company: Lattice Semiconductor Corp.

    The LatticeXP2 devices combine a Look-up Table (LUT) based FPGA fabric with Flash Non-volatile cells in an architecture referred to as flexiFLASH. The flexiFLASH approach provides benefits such as instant-on, small footprint, on chip storage with FlashBAK embedded block memories and Serial TAG memory and design security.

    Product Name: Mach4 CPLDs
    Company: Lattice Semiconductor Corp.

    The MACH ® 4 family from Lattice offers an exceptionally flexible architecture and delivers a superior Complex Programmable Logic Device (CPLD) solution of easy-to-use silicon products and software tools. The overall benefits for users are a guaranteed and predictable CPLD solution, faster time-to-market, greater flexibility and lower cost. The MACH 4 devices offer densities ranging from 32 to 256 macrocells with 100% utilization and 100% pin-out retention. The MACH 4 family offer 5-V (M4-xxx) and 3.3-V (M4LV-xxx) operation.

    Product Name: MachXO
    Company: Lattice Semiconductor Corp.

    The MachXO family of crossover programmable logic devices (PLDs) combines CPLD and FPGA attributes together to optimally serve applications such as bus bridging, bus interface and control that traditionally were implemented in CPLDs or low capacity FPGAs.

    Product Name: LayED
    Company: LayTools

    LayED is a powerful all-angles graphics editor especially developed for the layout of complex integrated circuits, including analog, digital, and mixed-signal designs.

    Product Name: LaySIM
    Company: LayTools

    One piece of software that an IC development software suite cannot do without is a simulator. With present day technologies, however, there are certain characteristics that are vital for such a tool. It must fully support the latest model formats, it should allow composite analog and digital net-lists to run ('gates' and transistors in the same net-list), it should converge reliably, and it should be able to provide straightforward approaches to analyses of such aspects as jitter and power consumption.

    Product Name: LayVER
    Company: LayTools

    LayVER is a sophisticated and comprehensive layout verification package that provides a complete set of tools to validate IC designs of any size and complexity. It offers database layer operations, provides spacing, intersection, extension, and sizing checks, as well as device and node extraction, with net-list comparison all under the same umbrella. With these features, design rule checks (drc), layout to schematic comparison (lvs) and parameter extraction (lpe) can be efficiently performed.

    Product Name: Design Review
    Company: LDRA

    A vitally important aspect of software development is reflected by the edict: “the software should work as expected.” LDRA’s Design Review widens the scope of the static analysis provided by Code Review and Quality Review to include an analysis of the as-built design of the source code.

    Product Name: LDRArules® - Programming Standards Checker
    Company: LDRA

    LDRArules incorporates next-generation reporting capabilities to show code quality, fault detection and avoidance measures. Users have the ability to quickly and easily view results in call graphs, flow graphs and code review reports in an easy-to-read, intuitive format. LDRArules enhances collaboration and communication across all members of the development team through an easy-to-use graphical user interface and sophisticated reporting mechanisms.

    Product Name: Wi2U
    Company: lesswire AG

    The Wi2U car hotspot is a UMTS to WLAN router enabling a reliable and secure internet connection for end user devices such as smart phones, tablets or laptops in vehicles.

    Product Name: CCSTEST: Library Verification and Correlation
    Company: Library Technologies, Inc.

    CcsTest is a suite of tools which are used for verifying the accuracy of of an existing Liberty library. They are part of SolutionWare. They can be automatically executed by makelib ccstests
    which carries out all intermediate steps for all the corners and library cells. The tool suite was originally designed to test Current Source Models like CCS and ECSM.

    Product Name: YieldOpt: Process Variation Analysis
    Company: Library Technologies, Inc.

    YieldOpt addresses the issue of variation of process and its impact on the timing aspects of the chip design. Process variation is becoming more and more significant with each new process generation. A single sigma parameter was thought to be sufficient to summarize the variation of previous generations of processes, the variation for new generations may require tens of new independent random variables to characterize the variations on the same die, same wafer, and different lots. Coupled with supply voltage sensitivity, and new temperature effects, it becomes quite a challenge to find proper process and environmental conditions for design and timing analysis.

    Product Name: C166
    Company: Logic Technology BV

    The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications.

    Product Name: CMX-CANopen
    Company: Logic Technology BV

    The company’s core business is to develop and support real-time, multi-tasking operating systems (RTOS), TCP/IP stacks, Flash File Systems, USB stacks and a CANopen stack for a wide variety of 8-bit,16-bit, and 32-bit microcomputers, microprocessors, and digital signal processors.

    Product Name: LPKF ProtoLaser S
    Company: LPKF Laser & Electronics, North America

    Getting your hands on prototype PCBs quickly is a crucial advantage in electronics development. This is what the new LPKF ProtoLaser S is all about. The laser system opens up a new dimension in in-house prototyping: it transfers the layout onto the PCB with unprecedented speed and precision – easily and with no chemicals.

    Product Name: LC15-TR03 - Serial ATA PHY
    Company: LSI Design and Integration Corporation (LDIC)

    LC15-TR03 is a stand-alone Serial ATA physical layer that is designed based on SATA standard.  This PHY is a 1.5Gbps transceiver that provides very high-speed data transmission.

    Product Name: LD7005 - Spindle/VCM Controller & Driver for 1", 1.8" & 2.5"
    Company: LSI Design and Integration Corporation (LDIC)

    LD7005 is a CMOS monolithic device that integrates spindle and VCM controllers as well as power stages into one chip. The device operates from 3.3V or 5V power supply. LD7005 is designed for a small-form-factor hard disk drive application.

    Product Name: LD7015 - Spindle/VCM Controller & Driver for 1", 1.8" & 2.5"
    Company: LSI Design and Integration Corporation (LDIC)

    LD7015 is a CMOS monolithic device that integrates spindle and VCM controllers as well as power stages into one chip. The device operates from 3.3V power supply. LD7015 is designed for a small-form-factor hard disk drive applications.

    Product Name: ASIC/ASSP Solutions
    Company: LSI Logic Corporation

    Avago Technologies has a long-standing history of providing innovative ASIC/ASSP solutions for the wired communications market. Avago has a proven track record in providing complex, high-performance ASIC/ASSP solutions with unrivaled channel density and best-in-class SerDes performance.

    Product Name: Printed Circuit Board Design | Printed Circuit Board Layout Design
    Company: MakeMyCircuitBoard

    An electronic circuit, however dandy it may be, is incomplete without an effective printed circuit board design. After designing a circuit and verifying its functionality, the next step is to design a printed circuit board on which the circuit can be implemented and tested using actual components. Some designers find this as an extension of their ongoing design process, while others may find it to be quite a cumbersome process. For a few masters of the craft, what fascinates them more than the complexity of the printed circuit board design is their artistic nature. Many companies hire their own expert printed circuit board designers.

    Product Name: LAYVER
    Company: MATRICuS Inc.

    LAYVER is a sophisticated and comprehensive layout verification package that provides a complete set of tools to validate IC designs of any size and complexity. It offers database layer operations, spacing, intersection, extension, and sizing checks, as well as circuit extraction, and net-list comparison all under the same umbrella.  

    Product Name: EM3DS 10
    Company: MEM Research

    EM3DS (Electromagnetic 3D Solver) is a novel, full-featured, frequency-domain full-wave simulaton tool tailored to efficiently accomplish the analysis of quasi-planar structures- specifically planar structures over complex substrates, where the finite conductors' thickness and the dielectric discontinuities are accounted for with no compromise – thus, rendering EM3DS a full 3D tool.

    Product Name: eFPGA Core®
    Company: Menta

    Menta’s eFPGA Core® technology is domain-specific. So every customer will have different ratio among FPGA parameters, like number of logic elements, I/O pads, dedicated blocks, etc.

    Product Name: ADiT
    Company: Mentor Graphics

    ADiT™ is an advanced fast-SPICE simulation tool specializing in analog and mixed-signal (AMS) transistor-level applications. It delivers accurate, reliable results 10X to 100X faster than traditional SPICE techniques for circuits with millions of transistors and devices.

    Product Name: Calibre nmLVS
    Company: Mentor Graphics

    Calibre® LVS, the market-leading layout vs. schematic physical verification tool, is tightly linked with both Calibre DRC and Calibre xRC to deliver production-proven device extraction for both physical verification and parasitic extraction. Calibre LVS performs a vital function as a member of a complete IC verification tool suite by providing device and connectivity comparisons between the IC layout and the schematic. Calibre's hierarchical processing engine runs Calibre LVS in tandem with Calibre DRC and Calibre xRC, supplying data for modifying the IC design to achieve superior functionality and reliability.

    Product Name: Calibre xRC
    Company: Mentor Graphics

    Delivers unparalleled performance on ASIC, memory, analog, SoC designs, etc. with no trade-off in accuracy. Single rule file can drive DRC, LVS, and Calibre xRC functionality. Reads LVS data structures to integrate parasitic information with intentional circuit elements. Model-based engine calculates intrinsic and coupling capacitances for all nets using the same high degree of accuracy.

    Product Name: ICX
    Company: Mentor Graphics

    Mentor Graphics® ICX family of products provides an advanced design and verification environment for even the toughest high-speed challenges. The Interconnect Synthesis (IS) approach of integrating physical design with electrical verification provides a single environment for rules entry, what-if design exploration, timing-driven placement, electrically-driven routing and system verification.

    Product Name: Mixer Products
    Company: Mercury Systems, Inc.

    Mercury Systems' family of Frequency Conversion Products features a complete product line of mixers, frequency doublers and IQ modulators ranging in frequencies from 0.01 GHz to 26.5 GHz. Our series of mixer designs covers all microwave frequency bands from communication to ultra-broadband, for military applications with wide section of IF bands and input power levels. 

    Product Name: µC/GUI
    Company: Micriµm Technologies Corporation

    µC/GUI provides a flexible graphical user interface for any embedded application that requires a graphical display. µC/GUI allows the software engineer to provide fantastic user interfaces to its product using a graphical LCD display.

    Product Name: μC/USB Host
    Company: Micriµm Technologies Corporation

    μC/USB Host is a real-time USB Host software stack designed for embedded systems equipped with a USB Host or OTG controller. It includes many class drivers (MSC, HID and CDC ACM). The stack requires a Kernel.

    Product Name: MegaCell Compiler (MCC)
    Company: Micro Magic, Inc.

    The MegaCell Compiler (MCC) makes building all types of regular structures such as SRAMs, CAMs, DRAMs, Register Files, FIFOs, ROMs, PLAs, and even pad rings, fast and easy. The MegaCell Compiler is so fast that any size repetitive structure can be built in the comparable time it takes to load the data from the disk. Mere seconds for even multi-Mbit SRAMs.

    Product Name: ML7C960A VME Slave Controller
    Company: Millogic

    The ML7C960 provides control for the Cypress CY7C964 VME Datapath chips. Millogic also provides the ML7C964, a pin compatible replacement device for the CY7C964 chips. The ML7C960 together with the ML7C964 provide a complete VME slave interface solution.

    Product Name: ML7C964A VMEbus Slave
    Company: Millogic

    The ML7C964 is a VME interface component, pin-compatible with the now-discontinued Cypress CY7C964. The ML7C960 VME controller in concert with ML7C964 interface chips provides a simple VME interface solution.

    Product Name: RTM-Break-out Card (for Keystone II family of EVMs)
    Company: Mistral Software Inc

    The Rear-transition Module – Break-out Card (RTM-BOC) from Mistral is an eight layer plug-in module for the Keystone II family of EVMs starting with the TCIEVMK2X and the EVMK2H EVMs showcasing the Multicore DSP+ARM KeyStone II System-on-Chips from Texas Instruments. The TCIEVMK2X and EVMK2HX are double wide AMC form factor cards which provide Hyperlink, AIF2 and XFI interfaces over the AMC.4 μTCA connector.

    Product Name: 40/100 Gigabit Ethernet MAC Core
    Company: MorethanIP

    The 40/100 Gigabit Ethernet MAC Core is designed to comply with the IEEE802.3ba Specification. The Core can  be used in either NIC (Network Interface Card) or Ethernet Switching applications. A set of configuration registers is available to dynamically set the Core to terminate and form MAC frames (NIC application) or to pass MAC frames without modification to the User application or to the Ethernet line (Switching application). When used in NIC or Switching applications, the Core provides support for IEEE managed objects, IETF MIB-II and RMON for management applications (e.g. SNMP).

    Product Name: FEA - Feasibility Optimization
    Company: MunEDA-ChipMD

    FEA enables the circuit designer to automatically optimize the operating point of its design to fulfil all electrical/geometrical constraints. A feasible design represents a first step towards successful circuit optimization.

    Product Name: MMA - Deterministic Mismatch Analysis
    Company: MunEDA-ChipMD

    MMA identifies and analyses mismatch-relevant transistor pairs on selected circuit performances. The variance of these local variations will be analyzed based on dependencies of device pair geometries.

    Product Name: MyChip Station
    Company: MyCAD, Inc.

    MyChip Station is a sophisticated physical design system, which can turn a Windows based personal computer into a powerful engineering workstation.

    It integrates physical layout, verification and translation tools. Using MyChip Station, custom layout will be more accelerated with easy-to use polygon layout feature, highest accuracy verification and compatibility with other tools in a hierarchical design environment.

    Product Name: MyProtor
    Company: MyCAD, Inc.

    MyProtor is a FPGA and ASIC prototype systems. There are various kinds of prototype systems in MyProtor: MP1100X / MP3100X.

    Product Name: Library Creation Platform
    Company: Nangate Inc.

    NanGate Library Platform™, a comprehensive tool set that enables efficient creation and validation of large numbers of digital cell variants.

    Product Name: NanGate Products
    Company: Nangate Inc.

    The NanGate solution includes a complete standard cell development platform (Library Creation Platform™), off the shelf enhanced cell library IP (MegaLibrary™), a revolutionary new class of EDA solution (Design Optimizer™) that optimize digital CMOS ICs to levels previously only achievable with extensive manual efforts and very large design teams.   To complete the offering, NanGate Professional Services can provide variety of services for design and library optimization.

    Product Name: Microwave Office 2010
    Company: National Instruments (Formerly AWR Corporation)

    Nonlinear behavioral modeling support for Agilent's X-parameters®, Mesuro's Cardiff model, and more. Significant improvements to the tuner including a user defined step and max and min values that are remembered. Linear stability analysis including normalized determinant function and stability envelope measurement. Connectivity tracer for identifying nets and locating short or open circuits visually.

    Product Name: NI Multisim
    Company: National Instruments Corp.

    The National Instruments Electronics Workbench Group equips design engineers, educators, and students with powerful and innovative circuit design technology. Educators and students can take advantage of easy-to-use teaching tools to overcome the traditional hurdles in electronics education. Professional engineers can improve productivity with intuitive capture tools, interactive simulation, board layout, and design validation.

    Product Name: LPC microcontrollers
    Company: NXP Semiconductors

    The best designers know it takes new ideas to make things faster, more connected and more efficient. It begins with a strong foundation, built using the right hardware and software tools. With their unprecedented performance, optimized connectivity, and design support you can count on, NXP LPC microcontrollers provide that foundation. They simplify design-in while also sparking the imagination, letting developers push their designs, challenge their creativity and find fresh ways to stand out. It's time to discover what thousands of engineers already know: designing with NXP’s LPC microcontrollers makes all the difference.

    Product Name: Change/ECO Management
    Company: Omnify Software

    For product manufacturers, managing change is central to creating a successful product and company. Many argue that it is not problems in functionality or implementation that keep them from meeting schedules, it is the challenge of keeping all players on new product development teams in sync on the current state of the product definition.

    Product Name: 360 DV-Inspect
    Company: OneSpin Solutions GmbH

    360 DV-Inspect provides the most in-depth, automated static analysis of any tool available, and is an indispensible side-arm for any RTL designer. DV-Inspect is used to rapidly eliminate errors prior to verification or synthesis, delivering a fully automated, simple use-model. The RTL code is targeted using multiple techniques to achieve a rigorous and exhaustive analysis. Formal engines provide more rigorous verification than that available through other techniques, such as standard linting. Assertion synthesis is leveraged to generate comprehensive structural test sets and coverage analysis, further improving quality. A debug tool with simulation trace generator makes understanding issues easy.

    Product Name: 360 DV-Verify
    Company: OneSpin Solutions GmbH

    OneSpin 360 DV-Verify is the only unified coverage-driven assertion-based verification solution available today. The combination of a fully functional, high-performance formal property analyzer with a unique assertion coverage evaluator eliminates the guesswork from quality assertion generation. DV-Verify is designed to augment existing verification environments, enabling the discovery of elusive bugs hard-to-find in simulation-only environments, while maximizing coverage.

    Product Name: ApplicationTracker
    Company: Open iT, Inc.

    OpeniT ApplicationTracker monitors activity levels of all applications on Windows, Unix and Linux platforms, independent of licensing method, without using wrappers.

    Product Name: LicenseAnalyzer: License Monitoring Software
    Company: Open iT, Inc.

    Create and easily share customized, live Excel dashboards with Open iT Analysis Server, in our new Enterprise version. Drag and drop to display the desired elements to create a customized software usage analysis dashboard. With one click, refresh the dashboard with new usage data.

    Product Name: StorageAnalyzer
    Company: Open iT, Inc.

    StorageAnalyzer is data storage management software that monitors files, file systems, disks and backups and reports on these resources allowing you to optimize storage resources and enabling accurate billing for storage services.

    Product Name: SystemAnalyzer
    Company: Open iT, Inc.

    By measuring CPU, memory and I/O usage for each application and user, for a variety of system-wide IT functions, you can improve and optimize your IT resources.

    Product Name: UsageAnalyzer
    Company: Open iT, Inc.

    Meter activity levels of users/hosts and applications.Track keyboard and mouse activities and see inefficient computer user patterns. Use data gathered in reports to eliminate repetitive strain injuries and increase user proficiency. See how to customize user training and assign best practices to improve worker efficiency and health.   Evaluate software usability before purchasing, by analyzing user habits.

    Product Name: OPTEK Precision Transport Systems
    Company: Operations Technology, Inc.

    Operations Technology is now offering its field-tested, Precision Transport Systems to Original Equipment Manufacturers. No other company offers the speed, accuracy, repeatability, reliability, and ergonomics that are inherent to these systems. There are five 'standard' sizes available and any of these can be optimized for a particular customer's requirements using OTI's in-house design and fabrication capabilities. The following is a more detailed listing of the system's configuration and capabilities.

    Product Name: Vacuum Lamination - DPL-24
    Company: Operations Technology, Inc.

    Vacuum Lamination of high-tech products has seen explosive growth in the last decade. Until now no system offered the level of vacuum, coupled with the use of positive pressure, that the DPL-24 Differential Pressure Laminator provides.

    Product Name: Arche
    Company: Orora Design Technologies, Inc.

    Arche platform automates the process of simulator-based characterization and electrical rule checking for custom integrated circuits, including analog, custom digital, memory, and mixed-signal integrated circuits.

    Product Name: PALM80251
    Company: Palmchip Corp.

    The 80251 core executes the instruction in a single clock cycle, and is an instruction set compatible implementation of the MCS-251 family. It’s about 3.19 times faster on average then the MCS-251 family. The Dhrystone v2.1 benchmark score is 0.258 DMIPS/MHz. The PALM80251 has a total addressable memory of 16Mbytes of which 16Kbytes is implemented as on–chip program memory, 1KBytes of on-chip data RAM, and the rest as external memory which can be used as RAM or ROM.

    Product Name: Digital Electronic PCB
    Company: PCBSourcing Co. Ltd.

    The age of digital electronics has come to be one of the most significant developments in the history of society. Digital electronics are sophisticated devices capable of sending information via electronic signals from one point to another point.Information is transmitted from one circuit to another by using electric currents.

    Product Name: Single Sided PCB
    Company: PCBSourcing Co. Ltd.

    The Single-Sided PCB is the most basic printed circuit board and track is only available on one side of the insulating substrate. The side containing the circuit pattern is called the solder side while the other side is called the component side.

    Product Name: Talon™ Model 2706: Recording System
    Company: Pentek Inc.

    A multiband recording & playback system for recording and reproducing high-bandwidth signals. The Model 2706 uses 16-bit, 200 MHz A/D converters & provides sustained recording rates up to 1600 MB/sec in four-channel configuration.    

    Product Name: ENCOMPASS SUPPORT NAVIGATION
    Company: Perception Software

    When it’s your challenge to figure out why a customer is experiencing a technical issue, and the best way to resolve it, the first thing you need to do is get your hands on all the relevant information that’s available to assess what’s happening. And you need to do it without wasting your time or the customer’s while you try to figure out where to find the data you need. Of course, there’s no guarantee you’ll ever know about all the sources of data that are out there, or that you’ll be able to get access to them even if you do.

    Product Name: Genie-Ethernet
    Company: PERFECTUS Technology, Inc

    Genie-Ethernet VIP is an Open verification methodology (OVM) implementation of IEEE Standard 802.3

    Product Name: Genie-ONFi (Open NAND Flash Interface)
    Company: PERFECTUS Technology, Inc

    Genie ONFi Verification IP is based on OVM 2.0 and fully compliant to ONFi 2.1 Revision specifications. It is a complete verification suite that helps designers to verify a NAND Flash Device. The VIP can behave as an ONFi Host and Transfer Command, Address and Data to NAND Flash Device according to the configuration.

    Product Name: Genie-PCIe
    Company: PERFECTUS Technology, Inc

    Genie-PCIe is a system verilog implementation of the PCI Express (PCIE) Standards.

    Product Name: Genie-SSU (SUPER SPEED USB 3.0)
    Company: PERFECTUS Technology, Inc

    GENIE SSU VIP is compliant to Super Speed USB3.0 specifications . It is a complete verification suite that helps designer to verify a USB 3.0 based designs . The VIP can behave as a host ( or a downstream port entity ) or it can behave as a device (or an upstream port entity ) based on the configuration of the VIP.

    Product Name: SAS Verification IP
    Company: PERFECTUS Technology, Inc

    The SAS VIP has a Genie-SAS™ verification engine that wraps around the “Design Under Test” (DUT) to simplify test development and accelerate debug of Serial Attached SCSI protocol based designs. It provides a complete framework to quickly develop self-checking, comprehensive tests for SAS-based initiator, target, or expander devices.  

    Product Name: SATA Verification IP
    Company: PERFECTUS Technology, Inc

    Perfectus has created a many-tiered product offering specifically aimed at delivering Serial ATA controller designs to market faster, with reduced effort and higher quality. These products are designed to solve the problem that absorbs the largest resources, time, and has the highest risk of a design – the verification effort. The SATA VIP has a Genie-SATA™ verification engine that wraps around the “Design Under Test” (DUT) to provide a complete framework to quickly develop self-checking, comprehensive tests for SATA-based Host and Target.

    Product Name: 8051
    Company: Phyton, Inc.

    CodeMaster-52 is a configurable set of software and hardware tools for developing 8051 applications under control of one easy-to-use integrated development environment (see the diagram above). A full configuration includes a C compiler of your choice, macro assembler, software simulator and either an in-circuit emulator or on-chip (JTAG) debugger. The matrix below displays all CodeMaster-52 kits available for ordering.

    Product Name: 80C196
    Company: Phyton, Inc.

    Project-96 is a tool set that includes hardware and software tools for developing applications based on the 80196 microcontrollers under control of one integrated development environment (IDE). You can select only those tools that you need and order the Project-96 configuration that fits your needs and your budget.

    Product Name: ARM
    Company: Phyton, Inc.

    The CodeMaster-ARM toolset include a friendly and easy-to-use integrated development environment, highly optimised Phyton CMC C compiler, software simulator, JTAG/SWD debugger-emulator, target boards and other components.

    Product Name: ChipProg-481
    Company: Phyton, Inc.

    Extremely fast! Programs and verifies programming of 1Gb NAND flash memory device for 23 s! Targeted at working with large density NAND and NOR flash memory devices. See the speed comparison between different programmers.

    Product Name: PIC
    Company: Phyton, Inc.

    Project-MC is a toolset that includes hardware and software tools for developing applications based on the PIC microcontrollers under control of one integrated development environment. A full package includes PASM-MC macro assembler, PDS-MC software debugger/simulator, PICE-MC in-circuit emulator integrated under control of the Project-MC IDE. The IDE with an embedded editor, project manager and PASM-MC macro assembler is a common part of either Project package. This tool set provides a complete development cycle, from editing source texts, to getting debugged code, and "burning" it into a target microcontroller or memory device by one of the Phiton programmer (chip burner). Popular third parties' compilers can also be bundled with the Phyton's tools.

    Product Name: RSC4x
    Company: Phyton, Inc.

    Project-SE is a set of hardware and software tools for developing applications based on the RSC-4x microcontrollers and VR Stamps produced by Sensory, Inc. Aworking under control of one integrated development environment (IDE). A full package includes MCA-SE macro assembler, PDS-SE software debugger/simulator, MCC-SE C compiler and PICE-SE in-circuit emulator integrated under control of one integrated development environment (IDE). Phyton also offers a few device programmers so this toolset provides a complete development cycle - from editing source texts, to getting debugged code and "burning" it into a memory device. The tools shown inside the "Project-SE IDE" green box above is a public domain product that can be downloaded at no charge from this website.

    Product Name: Triton Builder
    Company: Poseidon Design Systems, Inc.,

    Triton Builder is a design automation tool that synthesizes application specific hardware accelerators. With the use of Triton Builder, system designers obtain dramatic performance improvements to processor-based platforms.

    Product Name: Triton Tuner
    Company: Poseidon Design Systems, Inc.,

    The Triton Tuner is a system level design environment which enables designers to quickly analyze their architecture and modify their system for optimal performance. Most systems consist of processors, caches, memories, buses, peripherals, function blocks, and software algorithms. It is critical for the architecture to support the efficient flow of data between the blocks to meet the performance requirements of the system.

    Product Name: Management Information System
    Company: Programming Research, Inc.

    MIS gives engineering teams and managers access to historical analysis data, trends, statistics, and metrics that reflect the continued quality of your code base. With its coupling to many commercial Source Repositories and Version Control Systems, MIS additionally provides built-in legacy mode functionality. Using the industry leading capabilities of QA·C and QA·C++ MIS offers a unique window into the progress of your software projects.

    Product Name: Structure101 Architectural Analysis
    Company: Programming Research, Inc.

    Structure101 uniquely exposes complexity at all levels of the code-base, and lets teams develop simpler code-bases with defined architectures, so they get more done in less time.Structure101 is the first tool to make meaningful structural analysis and control possible for code-bases written in C and C++. As a Jolt-award winner in 2009, it continues to lead and innovate in this important space of software development.

    Product Name: Web Based Monitoring Platform
    Company: Pultronics Inc.

    Pultronics developed an enterprise-level Wireless Monitoring Platform and resulting solutions used for real time or near real time tracking and monitoring of critical assets, inventory or personnel.

    Product Name: Wireless Tag Reader - Reader, model TR-434A
    Company: Pultronics Inc.

    TR-434-A intelligent, networked UHF Tag Reader, part of Pultronics Wireless Temperature Monitoring System is built for fixed position sensing in temperature controlled environment (refrigerators, server rooms, laboratories, warehouses) and/or to monitor assets moving through a supply chain.

    Product Name: Wireless InSite EM Propagation Software
    Company: Remcom EM Simulation Software

    Remcom’s Wireless InSite is site-specific radio propagation software for the analysis and design of wireless communication systems.  It provides efficient and accurate predictions of propagation and communication channel characteristics in complex urban, indoor, rural and mixed path environments.  Applications range from military defense to commercial communications, including wireless links, antenna orientation and coverage, jammer effectiveness, and interference from multiple transmitters.  The latest release features XStream® GPU Acceleration and a more powerful ray engine to allow for shorter run times.  And when used with the Real Time Module, Wireless InSite can return path loss results in under a millisecond.

    Product Name: XFdtd Electromagnetic Simulation Software
    Company: Remcom EM Simulation Software

    XFdtd® is a 3D electromagnetic simulation solver that provides engineers with powerful tools to shorten development time and release products to market sooner.  Applications include:
    • Antenna design and placement
    • Biomedical applications, including MRI coil tuning, implantables, and EM field exposure
    • SAR validation
    • EMI/EMC testing
    • Microwave devices
    • Radar and scattering, including automotive radar and ground penetrating radar
    • Signal integrity
    With XStream® GPU Acceleration for both CPUs and GPU clusters, calculations finish in minutes as compared to hours.  In addition, Unlimited Memory Support enables simulation of massive problems exceeding billions of cells.  XFdtd reduces bottlenecks via other unique time-saving features including parameterization, scripting, and advanced meshing techniques. 

    Product Name: http://www.rogerscorp.com/hpf/bisco/index.aspx
    Company: Rogers Corporation

    Rogers is the first choice for in products requiring technologically superior gasketing and sealing… because we understand the dynamics of your industry and give you the competitive edge.

    Product Name: PORON® 4701-30
    Company: Rogers Corporation

    Very soft, easily compressed for use where flexibility is a key requirement.  Standard available  thickness range from 0.021"

    Product Name: Power Distribution Systems
    Company: Rogers Corporation

    Laminated busbars are three dimensional constructions enabling electrical distribution of current in power electronic modules. They are utilized in traction propulsion systems for rail applications, wind and solar inverters, industrial frequency inverters, large UPS systems or power supplies and other applications requiring the distribution of electrical power.

    Product Name: FlowTracer™
    Company: Runtime Design Automation

    FlowTracer™ is versatile and powerful infrastructure software (with built-in job scheduling) for design flow development, management, and parallel execution.  Any engineer, programmer, or IT professional who is used to implementing and managing flows with scripts or GNU Make will find FlowTracer™ a superior solution. Through its visualization and troubleshooting capabilities, complex design flows can be easily understood, maintained, and expanded.  In conjunction with its job scheduling capabilities, parallelism within a flow is automatically identified, resulting in optimal execution with potentially dramatic speedup.

    Product Name: MYK-41 DES ASIC
    Company: SafeNet, Inc.

    A radiation-hardened VLSI chip for embedment applications, the MYK-41 VLSI encrypts or decrypts using the DES algorithm.

    Product Name: DNA Detection & Synthesis
    Company: SemQuest, Inc.

    Contains 1000’s of pixels in a large die. each pixel contains 100’s of transistors. Each pixel
    can detect voltages and currents as well as drive voltages and currents. CMOS, Low noise,
    Low systematic noise

    Product Name: MEMS Circuits
    Company: SemQuest, Inc.

    Each pixel drives a micro mirror using electro-static forces. Pixels have analog range of motion for high dynamic range performance. 6mm x 9mm & 11.2mm x 14.2mm, High voltage CMOS, complex driver pixel.

    Product Name: X-Ray Imaging
    Company: SemQuest, Inc.

    Detector chips fall into the category of imagers for cameras (CCD or CMOS), Infrared cameras, optical disk read heads, or X-Ray imaging for medical, astronomy, or baggage scanning systems. Typically photons are collected by a detector, while these chips perform the amplification and readout functions. In visible wavelength or near infra-red imaging, the detectors are integrated directly onto the silicon chip.

    Product Name: OptimizePI Applications
    Company: SIGRITY, Inc.

    OptimizePI enables design teams to balance decoupling capacitor (decap) cost and performance for printed circuit boards (PCBs) and IC packages. Decap costs savings of 15% to 50% are typical. High performance is analytically assured for the power delivery system (PDS) at both a system and component level. OptimizePI is built on proven Sigrity hybrid electromagnetic circuit analysis technology in combination with our unique optimization engine to quickly pinpoint the best possible decap selections and placement locations.

    Product Name: JTAG Design Automation Tools
    Company: SiliconAid Solutions, Inc.

    SiliconAid Solutions' SAJE suite of tools can be used as individual point tools in an existing flow or used in concert to supply a front to back solution. With the addition of JTDTM in 2008 and the introduction of P1687 solution awaiting IEEE ratification, SiliconAid is leading the way to new levels of leveraging JTAG. We are also forming key partnerships to allow our technology to be leveraged into the board test area. Bridging yet another gap between design, ATE, and board test worlds. Our unique technology is protected under US Patent.

    Product Name: iW1689
    Company: Simple Silicon Inc. ( acquired by iWatt, Inc.)

    • Primary-side feedback eliminates opto-isolators and simplifies design
    • Multi-mode operation for highest overall efficiency
    • ±4% typical output voltage regulation
    • No external compensation components required

    Product Name: ATE-Ready
    Company: Simutest Inc.

    Simutest announces the ATE-Ready. The ATE-Ready is a pattern conversion and verification software that accepts functional test vectors in the VCD/EVCD or tabular format as inputs and generates cyclized test vectors in the industry standard test vector formats such as WGL or STIL. The ATE-Ready software has built-in capability to analyze the input test vectors against the tester capabilities and restrictions to ensure that the generated WGL or STIL files are compatible with the target ATE. In addition, the ATE-Ready software also provides capability to playback the cyclized vectors in the Verilog simulation to validate that the generated WGL or STIL files meet the design intent.

    Product Name: SiliconDebug
    Company: Simutest Inc.

    The SiliconDebug is a software product that maps the ATE captured data log of silicon failures into the design environment. For graphical viewing of silicon failures, the ATE-debug software generates a VCD file. User has flexibility to select the signals and time intervals for display. E.g. the VCD file may contain waveforms for all device pins or waveforms for only the failing pins or waveforms for the selected pins during the fail time interval(s). Additionally, the compare module of the SiliconDebug software compares and reports the differences between the source simulation patterns with silicon captured patterns or ATE stored patterns in a text report file.

    Product Name: Simcompare
    Company: Simutest Inc.

    Simcompare is a test vector comparison program that can be used by the design and test engineers to:
    • Compare Simulation / ATPG test vectors with ATE test vectors.
    • Compare best and worst case or pre/post layout Simulations.
    • Compare test vectors between two testers for the same design

    Product Name: Analog/Power
    Company: SMIC

    SMIC offers a trench MOSFET process in a wide voltage range from 20V-100V, covering a wide range of applications, including lithium batteries, notebook computers, mobile phones, electric bikes and others. The 0.18μm trench process has entered volume production with significantly reduced die size.

    Product Name: Mature Logic 0.35μm, 0.18μm, 0.13/0.11μm, 90nm
    Company: SMIC

    SMIC has multiple 90nm products in mass production at our 300mm facilities. With in-depth experience in process development, SMIC has made 90nm a vital technology node available to our customers worldwide. Our 90nm process technology uses copper interconnect, low-k material to produce high-performance devices. SMIC's 90nm production at our state-of-the-art 300mm facilities ensures cost optimization, providing our customers with additional resources for further technology enhancements. This 90nm technology fulfills the ever-stringent requirements of power, performance, and integration for applications such as wireless handsets, digital TVs, set-top-boxes, mobile TVs, PMPs, wireless LANs and PC chipsets. Furthermore, this technology can be customized to accommodate various design requirements including high speed, low power, mixed signal, RF, and to provide embedded/SOI solutions.

    Product Name: Non-Volatile Memory
    Company: SMIC

    SMIC delivers cost-competitive embedded non-volatile memory (NVM) technologies with proven manufacturing capability.

    SMIC offers a broad range of embedded NVM technologies with a comprehensive IP portfolio to support smart card, MCU and SoC applications. This embedded NVM IP provides outstanding program and erase performance, low power consumption with superior reliability and data retention.

    Product Name: PCI Express® PHYs
    Company: Snowbush IP (Rambus acquires Snowbush IP)

    The Snowbush low power, high-performance PCI Express (PCIe) PHYs shorten development time and risk associated with SoC designs for high-performance computing, and supports the PCI Express 1.1, 2.0 and 3.0 specifications, and incorporates the industry-standard PIPE interface. Snowbush IP offers a complete PCIe PHY and Controller solution that has been silicon-proven with more processes and foundries than any other IP vendor. The solution lowers the risk and time associated with integrating IP from different vendors. Additionally, interoperability with any PIPE-compliant PCI Express controller is supported.

    Product Name: SATA/SAS PHYs
    Company: Snowbush IP (Rambus acquires Snowbush IP)

    Snowbush IP SATA PHYs are designed for easy integration into SoC designs for storage applications in process geometries ranging from 130nm down to 40nm. The PHYs can be provided together with Snowbush SATA Device or Host controller as part of a complete, and fully integrated, SATA solution to minimize design effort and risk. The PHYs are compliant with Serial ATA 2.6 specification and the newly released 6G PHY Working Group Specification Revisions for Gen3i. Since they also support the SAPIS interface, they can easily be integrated with third party controllers when required.

    Product Name: CoverAll™
    Company: Solid Oak Technologies

    The CoverAll™ product is a series of modules and libraries which allows design engineers to graphically capture Design Intent and Verification engineers to capture Verification Intent in easily created and modified flow and timing diagrams. CoverAll™ automatically converts the diagrams into assertions, path covers and sequences for use in Assertion Based Verification with industry standard formal verification and simulation tools.

    Product Name: Sonnet Lite
    Company: Sonnet Software, Inc.

    Sonnet Lite™ is a free feature-limited version of Sonnet's professional Sonnet Suites, which provides EM analysis to thousands of companies across the globe. Many major manufacturers of high-frequency components and boards depend on Sonnet to analyze their predominantly planar high-frequency designs from 1 MHz through several THz. You can download it right now - it's

    Product Name: GENX
    Company: Space Codesign

    SpaceStudio helps users create virtual platforms very quickly by dragging and dropping components from an existing library. These system configurations containing processors, busses, and peripherals can be exported to (e.g.) Xilinx FPGA design and implementation tools, to realize initial prototypes, or first to final silicon.

    Product Name: VIRTUAL PLATFORM SIMULATION
    Company: Space Codesign

    SpaceStudio offers you access to functional-level design, at high levels of ESL abstraction, through Elix, an easy-to-use validation framework for creating C-language executable specifications of your embedded application.

    Product Name: Certitude Functional Qualification System
    Company: SpringSoft, Inc. (Acquired by Synopsys)

    The CertitudeTM Functional Qualification System is the only solution that removes the uncertainty of the effectiveness of your verification environment. It identifies verification weaknesses that allow bugs to go undetected and lead to functional problems, ASIC re-spins, and delays to market. The Certitude system does this with unique automation technology that:

        * Objectively measures the quality of the verification environment
        * Identifies verification holes that could hide design bugs

    Product Name: Siloti Visibility Automation System
    Company: SpringSoft, Inc. (Acquired by Synopsys)

    The Siloti™ Visibility Automation System transforms your verification methodology by eliminating the overhead associated with recording data for all the signals in a design. Unique automation technology in the Siloti system provides you full visibility of internal signals for complex IC and system-on-chip (SoC) designs

    Product Name: Verdi Automated Debug System
    Company: SpringSoft, Inc. (Acquired by Synopsys)

    Novas’ award winning Verdi™ Automated Debug System automates time-consuming processes of tracing causes and effects of digital designs over time. Verdi’s powerful behavior analysis engines and visualization capabilities allow viewing of information in both structural and time domains at the same time.  Verdi’s automating technology cuts debug time in half.

    Product Name: EVP6472 - FX30
    Company: Sundance Multiprocessor Technology Ltd.

    The platform comprises of the following:
    • Dual 500MHz C6472 DSPs
    • Virtex-5 FXT FPGA
    • Stand alone
    • USB2.0
    • Micro SD card slot
    • RS232
    • Power supply

    Product Name: Takumi D3A™
    Company: Takumi Technology Corporation

    Takumi D3A™ is aimed at improving mask yield, simplifying mask defect disposition and reducing mask costs. Note that it takes as input either design layout (with criticality data)  or post-OPC layout. Of course, more is possible; Takumi D3A can load multiple files simultaneously. Plus, it handles both GDSII and OASIS physical layout.

    Product Name: Takumi Enhance-LO™
    Company: Takumi Technology Corporation

    Takumi Enhance-LO™ improves yield by automatically optimizing a layout against a set of preferred rules, as well as layout-related, yield-loss mechanisms—lithography and random particle issues! The only alternative to Takumi Enhance is manual repair of these layout issues—an impractical alternative!

    Product Name: Takumi Enhance-RO™
    Company: Takumi Technology Corporation

    Takumi Enhance-RO™ improves the quality of a layout by automating the process of enforcing foundry-specified recommended rules. The only alternative to Takumi Enhance-RO™ is manual enforcement of those rules on layout—an impractical alternative!

    Product Name: Takumi HSF™
    Company: Takumi Technology Corporation

    Takumi HSF is designed to isolate and remove fatal hotspots on a given layout including full-chip layout.

    Product Name: CAM350
    Company: Technical Systems Integrators, Inc.

    CAM350XL combines CAM350 and BluePrint PCB to unite all PCB post processing tasks, including: DRC/DFF analysis with Netlist compare, paste and solder mask generation, Gerber file creation, NC drill and mill creation, assembly panel arrays definition, PCB documentation, and ECO automation.

    Product Name: IDM3000 Intelligent Servo Drive
    Company: TECHNOSOFT

    IDM3000 is a high-performance digital servo drive with embedded intelligence, based on the latest DSP controller technology. This drive can be used to control higher-power (up to 3000 W) brushless, induction, linear and DC motors.

    Product Name: AFG3000 Arbitrary
    Company: Tektronix, Inc

    Today's designs are often complex, demanding a variety of stimulus signals during test. With 12 standard waveforms, arbitrary waveform capability, and signal impairment options, the AFG3000 Series Arbitrary / Function Generator supports a wide range of application needs with one instrument. Best-in-class performance ensures signals are accurately reproduced. A large display and 25 shortcut keys make the AFG3000 Series Arbitrary / Function Generator both easy to learn and easy to use.

    Product Name: BERTScope Bit Error Rate Tester
    Company: Tektronix, Inc

    The BERTScope™ Bit Error Rate Tester Series provides a new approach to signal integrity measurements of serial data systems. Perform bit error ratio detection more quickly, accurately, and thoroughly by bridging eye diagram analysis with BER pattern generation. The BERTScope™ Bit Error Rate Tester Series enables you to easily isolate problematic bit and pattern sequences, then analyze further with seven types of advanced error analysis that deliver unprecedented statistical measurement depth.

    Product Name: Oscilloscope
    Company: Tektronix, Inc

    8 out of 10 engineers around the world trust Tektronix to help them debug and test tomorrow's designs faster. With the broadest portfolio of digital oscilloscopes available, the richest set of product features, the most extensive analysis capability and our award-winning service and support, Tektronix has the right oscilloscope to meet your need.

    Product Name: Instrument Control Toolbox 2.9
    Company: The MathWorks, Inc.

    The Instrument Control Toolbox™ lets you communicate with instruments, such as oscilloscopes, function generators, and analytical instruments, directly from MATLAB®.

    Product Name: IEEE1394 Bus Driver for Windows
    Company: Thesycon Systemsoftware & Consulting GmbH

    Microsoft Windows operating systems include a bus driver and various class drivers to support the IEEE1394 high performance serial bus. However, current driver support is limited to controllers and devices that are compliant to the 1394a standard. The features introduced with the 1394b standard cannot be used in Windows based applications and device drivers. Furthermore, there are some known stability issues that cause problems in industrial and professional applications with high reliability demands. Thesycon’s alternative 1394 bus driver provides a solution to these problems. It replaces the Microsoft driver and exposes a compatible programming interface to upper layers. In-box class drivers and existing custom device drivers will continue to work.

    Product Name: IEEE1394 Device Driver Toolkit for Windows
    Company: Thesycon Systemsoftware & Consulting GmbH

    The IEEE 1394 High Performance Serial Bus (also known as FireWire or i.Link™) is supported in all current Windows operating systems. Windows provides a bus driver and device drivers for various IEEE1394 OHCI compliant host controllers (e.g. from Texas Instruments / TI, VIA, RICOH or NEC). The Windows 1394 driver stack exports a programming interface which is available in kernel mode only. Win32 applications running in user mode are not able to access this interface.

    Product Name: CMOS Camera AHB Interface
    Company: Think Silicon Ltd

  • AHB2.0 master inteface for direct transfers to memory
  • AHB2.0 slave inteface for register programming
  • CMOS sensor. True Color Resolution: 1024x768 (Bayer pattern: 2048x1536)
  • Supports Single 32-bit transactions or bursts
  • Image data pushed on a predefined memory space
  • Supports color (bayer pattern) sensors with parallel data output in slave or master mode
  • Product Name: ThinkLCD Display Controller
    Company: Think Silicon Ltd

    The ThinkLCD Display controller is an AMBA AHB module that can drive a VGA or LCD TFT screen. It can be easily programmed with X11 Modeline timing to support any resolution as long as timing can be met in target technology. 24,16 and 8 bit colour modes are supported as well as arbitrary number of hardware overlay cursors/sprites

    Product Name: ACC: Asynchronous Circuit Compiler
    Company: Tiempo

    ACC (Asynchronous Circuit Compiler) is the first synthesis tool which automatically generates asynchronous and delay-insensitive circuits from a model written in a standard hardware description language.

    Product Name: Design Services
    Company: Tiempo

    We can offer several design services: IP customization: Our IPs are fully packaged and delivered with asynchronous to synchronous interfaces enabling a seamless integration into existing SoC architectures. Additionally, it is possible to customize our IPs to match specificities of your design such as interfaces, additional functionalities, custom instruction set for TAM16 etc.

    Product Name: Controlbuild
    Company: TNI-Software

    The ControlBuild is the first Automation CAD tool, on today's market, which allows a global approach to application development covering the "Needs & Requirements" through to "Production & Update" including design, PLC or RT code generators and dynamics documentation.

    Product Name: RT Builder
    Company: TNI-Software

    RT-Builder is one of the most advanced solutions for Real-Time design, modeling and analysis of complex, multi-processors and multi-bus systems and software. With RT-Builder, users can model, simulate, formally verify and executable specifications and prototypes of their systems prior to HW availability, and of course generate design documentation.

    Product Name: Safety-Checker Blockset
    Company: TNI-Software

    TNI-Software provides a powerful and easy-to-use solution for model-based designs verification, dedicated to Simulink®/Stateflow® users. The Safety-Checker Blockset significantly improves models reliability and reduces testing costs without changing the design flow.

    Product Name: COMSys
    Company: TQ-Group

    The COM Express mainboard MB-COME-1 in combination with a standard COM Express module forms a very compact hardware kit that can be used for a freely scalable embedded PC platform thanks to its modular design. Because of this – with uniform interfaces and mechanical dimensions – the PC system can be easily adjusted to suit the requirements of the application. The many extension options and storage media that can be added offer a high level of flexibility and allow functionalities and performance to be extended easily, quickly and inexpensively. Typical uses are found in embedded server applications, PC systems for automation, visualisation and monitoring and all applications that place high demands on quality, durability and long-term availability.

    Product Name: Embedded module TQM5200
    Company: TQ-Group

    The embedded TQM5200 module is based on the MPC5200 Power Architecture processor by Freescale. With 760 MIPS at a clock frequency of 400 MHz, the MPC5200 achieves a performance class that can handle a wide range of applications. It comes with up to six serial interfaces (PSC1 to PSC6). These can be used for numerous different synchronous and asynchronous protocols.

    Product Name: Hardware kit for system integration TQK5200
    Company: TQ-Group

    The hardware kits, consisting of a mainboard and module, allow cost-efficient and fast integration with complete devices and system solutions. Numerous predefined display solutions with different diagonals and resolutions are available for visualization.

    Product Name: IPC-104-Atom
    Company: TQ-Group

    The IPC-104-ATOM consisting of a single board computer and a display unit enables a cost-effective and simple project implementation. For visualisation and control a 10,4’’ touch display with SVGA is available. The front is IP65 qualified. The device is suitable to be integrated directly in a multiplicity of controls and applications and is therefore the basis for a system solution which is rapidly realizable. The IPC-104-Atom ist fitted with the 1,66 GHz Intel®Atom™ N270. Due to the mechanical characteristics the system may be used in industrial environmens.

    Product Name: irSys®
    Company: TQ-Group

    The spectrometer irSys® is based on the well known principle of scanning grating spectrometers with electrostatic driven micromechanical scanning mirror.

    Product Name: Assertain-ABV
    Company: TransEDA Systems Ltd

    Assertain is an innovative environment dedicated to measuring the completeness of the verification of digital SoC designs, in order to secure a faster and safer path to verification closure.

    Product Name: Assertain-HDL
    Company: TransEDA Systems Ltd

    Assertain HDL, the entry level of the Assertain product line, has been specially developed for design and verification engineers who need the best-in-class code coverage solution combined with test suite optimization capabilities and an extensive RTL analyzer.

    Product Name: VN-Check
    Company: TransEDA Systems Ltd

    VN-Check is a configurable HDL rule checker that analyzes a Verilog or VHDL design to provide clear, concise reports on problematic areas. Unlike basic rule checkers, VN-Check's rules can be configured at a very fine grain to match the design flow requirements.

    Product Name: VN-Control
    Company: TransEDA Systems Ltd

    an application-specific test automation tool that provides automatic test generation from a high-level template and automatic response checking for target applications.

    Product Name: VN-Cover
    Company: TransEDA Systems Ltd

    VN-Cover is a code and Finite State Machine coverage tool that identifies any unverified parts of a simulated HDL design. VN-Cover includes the most comprehensive set of metrics of the industry, among which line, statement, branch, condition, path, toggle, triggering, signal trace and FSM state, arc and path.

    Product Name: VN-Cover Emulator
    Company: TransEDA Systems Ltd

    VN-Cover Emulator enables engineers to obtain coverage on their SoCs in a hardware-accelerated environment and reach a level of confidence similar to that achieved using VN-Cover with software simulators. Using VN-Cover Emulator speeds up the overall verification task by providing better visibility on what has been covered, what is left, and when to stop verification.

    Product Name: VN-Optimize
    Company: TransEDA Systems Ltd

    -Optimize is a Test Suite Analysis and Optimization solution that: Dramatically cuts regression testing time by finding the optimal set of tests for the entire design, or selected instances or modules

    Product Name: VN-Spec
    Company: TransEDA Systems Ltd

    VN-Spec is a Specification Coverage and Impact Analysis solution that links design and verification flows to initial specification documents. VN-Spec brings a solid methodology for requirement management to project teams that need to get a more thorough vision of their SoC flow.

    Product Name: High-Definition Video High Speed Interconnect Solution
    Company: TranSwitch Corporation

    TranSwitch is your one-stop-shop for High Speed Interconnects for full-rate 3D video and 4Kx2K displays. Our patented HDP™ technology, developed for High Definition Television (HDTV) and 3-Dimensional Television (3D-TV), is the most advanced IP core technology in the industry. Capable of supporting both HDMI™ 1.4 and DisplayPort™ 1.1 standards with only one connector, HDP™ provides “one port and two solutions.”

    Product Name: SystemBase
    Company: Trenz Electronic GmbH

    Embedded Device Server designed by the company SystemBase are small ARM based modules supporting RS232, 422 and 485 interfaces at 921.6 Kbps.

    Product Name: Electric Vehicle Safety Unit
    Company: TTTech Computertechnik AG

    With the increasing electrification of the drive train, new components are playing a more and more important role in system safety. The control of the torque generated by the electric motor is – also in case of failure – of crucial importance, due to the typical lack of a possibility to interrupt the power flow mechanically.

    Product Name: HY-TTC 200 - Safety Controller
    Company: TTTech Computertechnik AG

    HY-TTC 200 is a proved-and-tested safety control unit for the development of prototypes and limited-lot production. It features a powerful Freescale CPU, as well as a number of configurable in- and outputs, among them three digital 15 A outputs, which can be operated simultaneously. All inputs and outputs of the HY-TTC 200 are over-voltage and short-circuit protected. In addition, internal security measures allow the identification of overload and short circuits at the outputs.

    Product Name: HY-TTC 60 - Modular Electronic Control System
    Company: TTTech Computertechnik AG

    HY-TTC 60, a variant of the HY-TTC 50 control device family, offers exceptional flexibility. The compact IP67 metal housing, made of die-cast aluminum, is also suitable for demanding environmental conditions such as humidity, vibration, temperature fluctuation, and mechanical pressure.

    Product Name: TTXUniversal Control Unit - Multi-Purpose ECU
    Company: TTTech Computertechnik AG

    TTXUniversal Control Unit is a high-performance, stacked-board expansion system for distributed hard real-time systems, which conforms to the FlexRay specifications.

    Product Name: CMMB LDPC decoder
    Company: TurboBest

    China Multimedia Mobile Broadcasting (CMMB) LDPC decoder

    Compliant with CMMB specifications, block size of 9216 bits, code rates 1/2 and 3/4.
    Frame by frame programmability of code rate and number of iterations.
    Syndrome based LDPC iteration stopping and indication.
    ASIC and FPGA proven.
    Throughput of 50Mbps on FPGA platform.
    Low power design.


    Product Name: DVB-S2 LDPC decoder
    Company: TurboBest

    Supports CCM, VCM, ACM modes.
    Supports 64Kbit and 16Kbit frames.
    0.1dB to 0.5dB coding gain improvement versus the standard reference.
    Frame by frame programmability of code rate, modulation, block size, number of iterations.
    Syndrome based LDPC iteration stopping and indication.
    Includes internal demodulator and standard interleaver.
    Relative low area.
    Low power design.
    fits both FPGA and ASIC technologies.

    Product Name: IEEE802.3an LDPC decoder
    Company: TurboBest

    The IEEE 802.3an LDPC Decoder core performs iterative decoding of channel data that has been encoded as described in the IEEE 802.3an standard.
    The high throughput required from the decoder and the specific structure of the IEEE802.3an LDPC code require unique solutions in order to facilitate an efficient high throughput, low complexity and low power decoder core.
    TurboBest's IEEE802.3an LDPC decoder core is based on a proprietary algorithmic solution accompanied by a specifically tailored decoder architecture for the IEEE802.3an LDPC code. These provide a very efficient, low complexity and low power decoder core supporting the required high throughput.

    Product Name: LDPC decoder for 802.16e - WiMAX
    Company: TurboBest

    LDPC decoder for 802.16e - WiMAX

    The IEEE 802.16e LDPC Decoder Core performs iterative decoding of channel data that has been encoded as described in the IEEE Std 802.16e standard.
    Through parallel processing with parameterizable number of PUs the decoder is capable of achieving ANY desired throughput (for example: throughput of 80 Mbit/sec with 6 Pus at 200 MHz clock frequency at lowest rate - 1/2).
    The LDPC codes is preferable over CTC codes for several reasons:
    1. Low complexity, results in small silicon area of only 125 Kgates for 1 PU decoder. It is comparable even
        to the inferior CC decoder.
    2. LDPC codes are patent-free making them a perfect candidate for high volumes low price communication chips.
    3. The LDPC has a clear advantage over CTC enabling to encoding codeword length up to 2304 bits
        compared to 960 bits in the CTC. The performance is 0.75 dB in favor of the LDPC in maximal FEC block
        transmission conditions.

    Product Name: Advanced Professional Kit
    Company: Ultra-X Benelux B.V

    Advanced Computer Diagnostics for the Professional
    The Advanced Professional Kit is Ultra-X's top of line testing package. Combining the most comprehensive set of hardware and software test tools available, the Advanced Professional Kit contains everything technicians could possibly dream of to test Servers, Desktops, Workstations, Notebook & other x86 compatible mobile devices.

    Product Name: QuickCAST Mobile
    Company: Ultra-X Benelux B.V

    QuickCAST Mobile is a fully independent dedicated mini-server designed to assist in the deployent of Ultra-X tools in a pre-operating system (Pre-O/S) diagnostic environment. Deployment time is complete within a matter of seconds allowing for simultaneous deployments (multicasting) to hundreds of machines. With QuickCAST Mobile in your company’s hands, servicing any PC Desktop, Laptop, Netbook or Server becomes effortless.

    Product Name: QuickPOST PCI
    Company: Ultra-X Benelux B.V

    The QuickPOST PCI uses the latest decoding technology, follows established BIOS standards, and supports the complete PCI specifications to greatly reduce or eliminate the guesswork involved in troubleshooting systems that fail to boot. A must have for any PC Technician.

    Product Name: QuickTech Legacy
    Company: Ultra-X Benelux B.V

    QuickTech Legacy (QT) is a powerful yet easy to use diagnostic utility that allows you to quickly and accurately troubleshoot failures in a PC's major components. QuickTech Personal is a test tool for small office or home use for quick system troubleshooting. It is ideal for determining a course of action to take in resolving a problem. For example, you may have a simple hardware problem that can be repaired without calling a professional technician or taking your system in to your local shop. You can save yourself a lot of money in unnecessary repair cost and reduce system down time.

    Product Name: QuickTech Pro USB
    Company: Ultra-X Benelux B.V

    Assuring quality, stability and reliability of newly built, serviced or upgraded PCs are primary concerns for any System Builder, PC Refirbisher and Service Technician. QuickTech PRO USB offers the most accurate and reliable results available enhancing both efficiency and confidence.

    Product Name: Self-BOOT Diagnostics
    Company: Ultra-X Benelux B.V

    QuickTech Professional, Ultra-X's professional-level PC diagnostic software program, is designed to meet the rigorous testing needs of system developers and integrators, OEM's, technicians, MIS professionals, and end users who want to quickly and accurately test and troubleshoot core system components, functions and peripherals.

    Product Name: VT18AD10B10
    Company: V-Trans Microelectronics Inc.

    This Analog -to-Digital converter IP has a monolithic differential pipelined architecture with output error correction logic providing 10 bits conversion accuracy from 10 up to 110 Mhz sampling frequency. It is designed for industry standard 0.18um 1P6M CMOS technology supplied at 3.3V.

    Product Name: VT18DCXO
    Company: V-Trans Microelectronics Inc.

    The V-Trans VT18DCXO crystal oscillator cell provides a low phase-noise output, with a low frequency variation over temperature. Oscillation frequency can be digitally adjusted ( +/- 100ppm) In power-down mode, the oscillator is bypassed. An external clock signal can be applied to “xin” pin.

    Product Name: VT18VDAC
    Company: V-Trans Microelectronics Inc.

    This IP is composed of a triple channel 10-bits 240 MS/s DAC, designed for industry standard 0.18um 1P6M CMOS technology supplied at 3.3V.

    Each independent DAC uses a segmented current steering architecture, combined with improved twodimensional centroid switching scheme, to achieve simultaneously high update rates, at least 10-bit of intrinsic static accuracy, and a very good dynamic characteristics.

    Product Name: VT40LVD106
    Company: V-Trans Microelectronics Inc.

    V-Trans ‘s FPD Link Receiver Macro is based on National Semiconductor openLDI specification v0.95 dated May 13th 1999 that allow the transfer of digital display data between a display source and a display device.

    Product Name: VT65LVD104
    Company: V-Trans Microelectronics Inc.

    V-Trans 's FPD Link Receiver Macro is based on National Semiconductor openLDI specification v0.95 dated May 13th 1999 that allow the transfer of digital display data between a display source and a display device.

    Product Name: DFM - Design Verification
    Company: Valor Computerized Systems, Ltd.(acquired by Mentor Graphics)

    Enterprise is DFM software for OEMs and PCB designers, and much, much more. It's actually a unique, virtual manufacturing system, which enables OEMs to simulate the entire production process, from design to manufacture to assembly, concurrently with the design process. With Enterprise, designs are optimized for excellence using a physical design model of the PCB assembly - revision spins are practically eliminated, and you benefit from faster times to market and improved product quality

    Product Name: MC/DC for VectorCAST
    Company: Vector Software, Inc.

    Modified Condition / Decision Coverage (MC/DC) provides two levels of verification for conditional expressions. The first level, named MC/DC Branches, tracks each subcondition in an expression to verify that is has been tested with both True and False values. The second level, named Equivalence Pairs, verifies if each subcondition can affect the value of the condition. This is done by generating a truth table for the expression, and then finding a pair of rows in the table that will generate a different result when all values except the tested value remain constant. During execution, if both rows have been executed, then the test proves that, by changing the only tested value, the condition's value changes.

    Product Name: VectorCAST/RSP
    Company: Vector Software, Inc.

    The principle of automated testing should be at the forefront of any attempt to create test software. Real-time embedded code is often tested with a series of test programs, each testing a separate feature. The problem with this method is most of these programs only test what the programmers are changing. What about interactions between unrelated code due to sharing of resources?

    Product Name: HDL Component Software
    Company: Verific Design Automation Inc.

    Verific Design Automation software offers a number of packages, all written in platform independent C++.

    Product Name: Verilog Netlist Only Parser
    Company: Verific Design Automation Inc.

    Verific's Verilog Netlist Only Parser reads a Verilog structural netlist directly into Verific's hierarchical database. It does not create any intermediate parse tree or other persistent data structure. The Verilog Netlist Only Parser can be of great use to EDA applications that do not (yet) require RTL support. As with all Verific's software, the product is shipped as C++ source code and backed with a rigorous support and maintenance program.

    Product Name: ARM Cores
    Company: VeriSilicon Holdings Co., Ltd.

    VeriSilicon has licensed a range of ARM® processors, including the ARM7TDMI® processor, the ARM922TTM processor and the ARM926EJ-STM processor to expand its product portfolio and enable the development of advanced SoC systems that meet the rapidly evolving requirements of digital consumer devices.

    Product Name: V.Blox IP Libraries
    Company: VeriSilicon Holdings Co., Ltd.

    VeriSilicon's V.Blox IP Library of industry proven semiconductor IP includes a comprehensive selection of commonly required functional "building blocks" that offer ease of integration and verification - providing further reliability, risk reduction and time-to-market advantages in the development of complex SoC's and ASICs.

    Product Name: V.Library Foundry Libraries
    Company: VeriSilicon Holdings Co., Ltd.

    VeriSilicon's V.Libs Foundry Libraries (V.Libs) include a wide range of foundry specific semiconductor IP. V.Libs are optimized for different performance criteria (power, performance, area) and include the following IP types: standard cell libraries, I/O cell libraries and memory compilers. To date, more than 500 customers worldwide have downloaded a V.Libs for a wide range and complexity of designs, such as multi-million gates SoCs (embedding ARM7 designs, 32-bit MCU designs), and have achieved "first silicon success" with volume production.

    Product Name: VSI407US
    Company: VeriSilicon Holdings Co., Ltd.

    The VSI407US is a low-cost, low-power voice processor in an ultra-thin package that delivers the perfect mix of high performance and small footprint necessary in Voice over WiFi (VoWiFi) applications such as cell phones, PDAs and other handheld devices.

    Product Name: VZ.AudioHD
    Company: VeriSilicon Holdings Co., Ltd.

    Over the last few years, the push for high definition multimedia devices has been pretty clear.  Initially, this category has been dominated by the success in the HDTV space, fueled by dramatic price reduction of flat panel displays, but several other products are now beginning to make traction in the market place.  Next generation DVD players, Blu-Ray and HD-DVD, constitute a fast-growing portion of this space and according to the Santa Clara Consulting Group, will represent a $4 B market by 2010.  These devices also present enormous design challenges when compared to existing DVD players.  For example, audio performance requirements have increased several-fold to support new high-quality audio standards as well as complex use cases encompassing a large number of different audio technologies. To address these requirements, the fully integrated VZ.AudioHD platform includes a wide assortment of pre-optimized high-end audio software modules, high-performance ZSP800 processor, and system software framework.

    Product Name: ZSP200
    Company: VeriSilicon Holdings Co., Ltd.

    The VeriSilicon ZSP200 is a fully synthesizable, low cost DSP core that can be easily integrated into and programmed in your system-on-a-chip design. The ZSP200 DSP core enables optimal cost and power saving in applications where a microprocessor cannot deliver the DSP performance required. ZSP200 is available with AMBA master/slave interfaces and a range of supporting peripherals for audio and voice applications. Whether you choose the soft macro or hard macro version, the ZSP200 is ideally suited to help you get your product to market quickly.

    Product Name: ZSPneo
    Company: VeriSilicon Holdings Co., Ltd.

    ZSPneo is a new breed of processor that combines the capabilities of the DSP and the MCU on a single core. It is ideal for cost sensitive applications that require control processing performance above the existing 8-bit microcontrollers, but cannot tolerate the unnecessary cost of the 32-bit microcontrollers.

    Product Name: Incisive® Enterprise Specman Elite®
    Company: Verisity Design, Inc. (Acquired by Cadence)

    Cadence® Incisive® Enterprise Specman Elite® Testbench uses executable specifications and designer-specified constraints to automate testbench generation, while simultaneously detecting misrepresentations of the specification. Its automated data and assertion checking speeds debug, while its functional coverage analysis capability drives verification using the Plan-to-Closure Methodology.

    Product Name: Magic Triangle
    Company: Verum Software B.V.

    ASD:Suite is a software design (CAD) platform based upon Verum’s patented Analytical Software Design (ASD) technology. It ushers in the next phase of software design automation because it gives designers the power to eliminate all behavioural defects from complex programs.

    Product Name: VinRZ5110
    Company: VinChip Systems

    VinRZ5110 is a low power, high performance 32-bit processor solution targeting embedded applications where low power and system cost are of utmost importance. It is based on Harvard architecture, with single cycle memory access and multiple enhanced features as described below.

    Product Name: Multi-Instrument Series
    Company: VIRTINS TECHNOLOGY

    Both softkey and hardkey are remotely upgradable. An upgrade activation code will be sent to you if an upgrade package is purchased.  If you have a hardkey, a hardkey upgrade package file will be sent to you to re-initialize your hardkey .

    Product Name: DDR3 SDRAM
    Company: Virtium Technology, Inc.

    The industrial DDR3 memory generation allows the data I/O speed to be eight times the memory clock speed because of its eight deep pre-fetch buffer feature. This enables the DDR3 memory to maintain transfer data at rates up to PC17000 when using a memory speed of 266 MHz. Virtium offers DDR3 SDRAMs in a wide range of form factors and features including SODIMM, MicroDIMM, ECC SODIMM, SORDIMM, VLP RDIMM, Mini-DIMM, and LR-DIMM.

    Product Name: EDWin - Electronic Design for Windows
    Company: Visionics

    The growing demands of users laid the foundation for development of an advanced version of EDWin, known as EDWin32.

    This package incorporates all the advantageous features of the earlier versions of EDWin (Upgrade path to EDWin 32 is EDWin ver. 1.70).
    In addition to this, EDWin32 provides better zoom precision and accuracy, owing to its 32 bit application format. Operations may be carried out with greater speed and reliability.

    Product Name: EDWin - Electronic Design for Windows
    Company: Visionics

    EDWin - Electronic Design for Windows is one of our first, and the best (we like to think), system, running completely under Windows 3.1, or higher (no problems noted under Windows95 or Windows NT) It,like the EE Designer III/The Professional (running under MS-DOS), features almost everything you´ll ever need to get your design jobs done in the most efficient way.

    Product Name: EE Designer III
    Company: Visionics

    The EE Designer, followed by the EE Designer II and finally the EE Designer III were our first major "hits" in the EDA CAD industry, all of them winning international acclaim, not least in the USA, where many major high-tech companies use the EE Designer III today. Unfortunately, the EE Designer III has been subject to major Software Piracy and counterfeiting in Germany and in the USA over the last few years. You will find further information about this on our Piracy Page Please read it!

    Product Name: W65C265S 16–bit Microcontroller
    Company: Western Design Center, Inc.

    The WDC W65C265S microcomputer is a complete fully static 16-bit computer fabricated on a single chip
    using a Hi-Rel low power CMOS process. The W65C265S complements an established and growing line of
    W65C products and has a wide range of microcomputer applications.

    Product Name: Character
    Company: WINSTAR Display Co., Ltd.

    Winstar offers a wide range of standard character LCD modules to fit for customers applications. Character modules display formats are available from 8x2 through to 40x4. These LCD and LCM modules can be used on industrial and consumer’s application such as entrance guard’s equipment, telegram, car and home audio, game and toy....etc.

    Product Name: Chinese
    Company: WINSTAR Display Co., Ltd.

    Many of Winstar’s Graphic LCD modules support Chinese fonts and self-defined characters.. These graphic modules have wide operating voltage and low power consumption suitable for battery power portable device. It includes Chinese simple fonts and Chinese complex fonts. The series are graphic and character mix modes display.

    Product Name: COG
    Company: WINSTAR Display Co., Ltd.

    Winstar COG (chip-on-glass) LCD modules provides resolution sizes of 128x64 to 320x240 pixels as well as an option of 16x2 character COG LCM. The COG package offers high quality with the benefits of light weight, and low power consumption. Also, it is available to add a connection board for each item to change the interface from FPC to pins or cables.

    Product Name: Graphic
    Company: WINSTAR Display Co., Ltd.

    Winstar Liquid crystal display offers a low current high-resolution solution. We have an extensive range of graphics LCD modules with various backlight and LCD type combinations. Winstar’s LCM can be used on instrument and industry machinery equipment as well as electrical home appliances, consumer electronic.

    Product Name: TAB
    Company: WINSTAR Display Co., Ltd.

    Winstar compact TAB (Tape Automatic Bonding) LCD modules with resolution 128x64 pixel to 320x240 pixel. These TAB LCD modules are offered with and without a backlight. Winstar TAB product lines are ultra thin and light and low power consumption which are great for handheld instruments, cell phones, PDAs, etc.

    Product Name: TE2440-II
    Company: Witech Co., Ltd

    TE2440-II is an updated version of TE2440, a Witech ARM9 development board based on the Samsung S3C2440A with full featured MMU (Memory Management Unit).

    Product Name: License Activation Center
    Company: X-Formation

    License Activation Center (LAC) is a SaaS solution that provides centralized license management for ISVs and on-demand access to software for customers. LAC drives revenue and cuts operational costs by simplifying and automating license creation and delivery, while providing business intelligence through integrated reporting and tracking of entitlements.

    Product Name: License Statistics
    Company: X-Formation

    License Statistics is a web-based license monitoring tool that supports over 10 license managers, including LM-X, FlexNet, and Reprise License Manager (RLM).

    Product Name: LM-X License Manager
    Company: X-Formation

    LM-X License Manager enables ISVs to easily license their software and maximize revenue by quickly adapting to changing markets and customer needs.

    Product Name: Artix-7
    Company: XILINX

    Artix™-7 FPGAs deliver the lowest power and lowest cost to address high-volume markets. This family is one of three product families built on a common 28nm architecture designed for maximum power efficiency and offers over two times the capacity, 30% higher performance, 50% lower power consumption -- and logic up to 350K logic cell density at lower price points than Spartan®-6 FPGAs. The Artix-7 family establishes a new standard for best cost for higher speed interfaces, including memories and transceivers. Artix-7 FPGAs further reduce system cost with the smallest footprint packages, leveraging wire bond chip-scale BGA technology.

    Product Name: Kintex-7
    Company: XILINX

    Kintex™-7 FPGAs establish a new category of FPGAs with high-end performance at less than half the price. The Kintex-7 family is one of three product families built on a common 28nm architecture designed for maximum power efficiency and delivers a 2x price-performance improvement while consuming 50% less power compared to previous generation FPGAs. Kintex-7 FPGAs offer high-density logic, high-performance serial connectivity, memory, and DSP, plus Agile Mixed Signal all to enable higher system-level performance and the next level of integration. These capabilities allow for continued innovation and differentiation in designs at volume price points.

    Product Name: XJLink / XJLink2
    Company: XJTAG

    XJLink and XJLink2 are small, portable, USB hardware devices that provide a high speed interface (480Mbps) to the JTAG chain on a circuit board. The small, lightweight design means the XJLink or XJLink2 can easily be moved to the Unit Under Test (UUT). Advanced features, like their programmable JTAG signal pin position, switchable power supply and auto signal skew, make it easy to connect to a wide range of circuit boards. Simple to install and use due to the USB plug-and-play ability.

    Product Name: logiBMP
    Company: Xylon

    The logiBMP is 2.5D graphics accelerator from Xylon logicBRICKSTM IP library, optimized for Xilinx FPGAs and designed to speed up graphics operations with bitmaps. This IP core significantly speeds up GUI rendering. The logiBMP supports very complex bitmap operations like texture renderings, picture filtering, up and down scaling, and bitmap rotating. The core is fully embedded into Xilinx Platfrom Studio and EDK tools, and its integration with on-chip CoreConnect PLB and OPB busses is very simple. Parametrizable VHDL design allows tuning of slice consumption and features set through an easy-to-use GUI interface. The logiBMP enables perspective correct texture renderings of 2.5D graphics scenes. The IP core can be easily integrated with other logicBRICKS, i.e. logiCVC Compact Multilayered Video Controller and the logiBITBLT 2D graphics accelerator to support smooth graphics transition and animations.

    Product Name: logiCVC-ML
    Company: Xylon

    The logiCVC-ML IP core is an advanced display graphics controller that enables an easy video and graphics integration into embedded systems with the Xilinx FPGAs. It can be used as a standalone graphics IP core, or as a part of larger graphics systems along other Xylon logicBRICKS(TM) IP cores. The logiCVC-ML is a real plug-and-play IP core, supported by the Xilinx Platform Studio and the EDK integrated software solution, and designers familiar with these tools can immediately start designing. The IP's size and features can be easily adjusted through IP drag and drop EDK interface. The logiCVC-ML comes ready-to-use and with the rich set of deliverables including SW driver, documentation and an example design. This mature and proven IP core works with a broad offer of third-party graphics design tools allowing for design of very advanced GUI embedded systems.  For quick evaluation and developments Xylon offers the low-cost logiTAP Platform for Embedded GUI developments. Higher resolutions are available on request.

    Product Name: logiVIEW
    Company: Xylon

    The logiVIEW Perspective Transformation and Lens Correction Image Processor IP core for video and imaging applications using single or multiple camera imagers removes fish eye distortions caused by extreme wide-angle field of view (FOV) lenses, makes perspective corrections to the captured video and stitches multiple corrected video inputs in a resulting single image for the LCD display. The logiVIEW corrects multiple 30 fps or higher frame rate video inputs in real-time. The provided calibration software, with the included preview option, speeds up IP adoptions to different camera imagers and camera system setups.

    Product Name: logiWIN
    Company: Xylon

    The logiWIN IP core accepts a streaming video input, decodes it and converts into the RGB format. The input video can be real-time scaled, de-interlaced, cropped and positioned on the video display. Captured and processed video must be displayed by a graphics controller IP, i.e. the Xylon logiCVC-ML Compact Multilayer Video Controller. The logiWIN integrates high-quality anti-aliasing algorithm that guarantees high picture quality without visible artifacts. The core is fully embedded into Xilinx Platform Studio and EDK tools, and its usage does not require skills beyond general Xilinx tools knowledge. Parametrizable VHDL design allows tuning of slice consumption and features set through an easy-to-use GUI interface. Instantiations of multiple logiWIN IPs enable processing of multiple video inputs within a single Xilinx FPGA device.

    Product Name: eXCite
    Company: Y Explorations, Inc.

    eXCite takes ISO/ANSI-C and synthesizes it to Verilog or VHDL RTL suitable for input to FPGA or ASIC logic synthesis tools.

    Product Name: Parasitic Extraction Tools
    Company: Zeni EDA

    In deep sub-micron technology, interconnect parasitic effects of layout are having more and more influence on the performance of circuit designs. Zeni PE provides layout engineers the capability to perform highly accurate parasitic capacitance, resistance and inductance extraction on full-chip layouts, selected area, or a single net.

    Product Name: eZ80Acclaim Plus!
    Company: Zilog, Inc.

    The eZ80F91 Mini Enet Module, a member of Zilog’s eZ80AcclaimPlus! family, is a compact, high performance Ethernet module specially designed for the rapid development and deployment of embedded systems requiring remote control and Internet/Intranet connectivity. This expandable module is powered by the eZ80F91 Ethernet controller, featuring a power-efficient, high-speed, optimized pipeline architecture.

    Product Name: eZ80Acclaim Plus!
    Company: Zilog, Inc.

    The eZ80F91 Mini Enet Module, a member of Zilog's eZ80AcclaimPlus! family, is a compact, high performance Ethernet module specially designed for the rapid development and deployment of embedded systems requiring remote control and Internet/Intranet connectivity. This expandable module is powered by the eZ80F91 Ethernet controller, featuring a power-efficient, high-speed, optimized pipeline architecture.

    Product Name: Intrusion Detection
    Company: Zilog, Inc.

    Zilog offers a Bundled ZMOTION Intrusion Detection Option for security-related motion detection applications that combines a ZMOTION MCU with a selection of three lenses and pyroelectric sensors, plus API settings for optimal lens performance.

    Product Name: Z16FMC MCU
    Company: Zilog, Inc.

    The Z16FMC Series of Motor Control MCUs features Zilog's ZNEO® CPU, which boasts a highly-optimized instruction set that achieves higher performance per clock cycle with less code space and lower overhead than competing architectures.

    Product Name: Z8 Encore!
    Company: Zilog, Inc.

    Zilog’s Z8 Encore! F0830 Series of MCUs is the first in a line of Zilog microcontroller products based on the 8-bit eZ8 CPU and offering Flash in-circuit programming capability that allows for faster development time and program changes in the field.

    Product Name: ASI4U/ASI4U-E
    Company: ZMD America, Inc.

    ASI4U/ASI4U-E is a new generation CMOS integrated circuit for ASI networks. The low-level field bus AS-I (Actuator Sensor Interface) was designed for easy, safe and cost-effective interconnection of sensors, actuators and switches. It transports both power and data over the same two-wire unshielded cable.

    Product Name: A²SI-Lite
    Company: ZMD America, Inc.

    A²SI-Lite (A²SI-L14/A²SI-L16) is a monolithic CMOS integrated circuit certified for AS-I (Actuator Sensor-interface) networks. AS-I networks are intended for industrial automation. This integrated circuit is dedicated to be used as simplified interface IC for key control panels, simple sensors and small actuators.

    Product Name: ZADCS0882/0842/0822
    Company: ZMD America, Inc.

    The ZMDI ZADC0882 / ZADCS0842 / ZADCS0822 are 8-Bit low power analog-to-digital (A/D) converters with up to 300ksps conversion rate. The converter is based on successive-approximation- register architecture.
    All converters have an 8-channel input multiplexer and a highbandwidth a track/hold circuit. All analog inputs are software confi gurable as eight / four / two single ended or four / two / one differential analog input channels as well as for unipolar or bipolar output coding.

    Product Name: ZADCS1082/1042/1022
    Company: ZMD America, Inc.

    The ZMDI ZADC1082 / ZADCS1042 / ZADCS1022 are 10-Bit low power analog-to-digital (A/D) converters with up to 250ksps conversion rate. The converter is based on successive-approximation-register architecture.
    All converters have an 8-channel input multiplexer and a highbandwidth a track/hold circuit. All analog inputs are software confi gurable as eight / four / two single ended or four / two / one differential analog input channels as well as for unipolar or bipolar output coding.

    Product Name: ZADCS146/ZADCS147
    Company: ZMD America, Inc.

    The ZMDI ZADC146 and ZADC147 are 12-Bit analog-to-digital (A/D) converters with up to 200ksps conversion rate. The converter is based on successive-approximation-register architecture.
    Both have an 8-channel input multiplexer and a high-bandwidth track/hold circuit. All analog inputs are software confi gurable as eight single ended or four differential analog input channels as well as for unipolar or bipolar output coding.

    Product Name: DS-2 (e-PLM)
    Company: Zuken

    Zuken’s Engineering Data- and Lifecycle Management Solution, DS-2 offers the latest PLMready and workflow support within the enterprise/global electrical and electronics engineering world. Today our customers are demanding capabilities to support them in designing anywhere and building/manufacturing anywhere (DAMA) in order to take advantage of regional time zones, material and engineering costs.

    Product Name: E³.series
    Company: Zuken

    E³.series is Zuken’s completely Windows®-based, modular electrical CAD software for the design, documentation and simulation of electro technical, pneumatic and hydraulic applications, cabinet layout, as well as for wire harness design.

    Product Name: E³.WireWorks
    Company: Zuken

    E³.WireWorks is a Windows-based, modular, scalable and easy-to-learn system for engineering design of wiring, harnesses, cable assemblies, control panels, hydraulics and pneumatics. Together with SolidWorks Premium Routing tools, E³.WireWorks is a complete solution for the design engineer from design concept through physical realization and manufacturing output. E³.WireWorks is designed to work out-of-the-box with SolidWorks Premium Routing and SolidWorks PDM Enterprise.

    ASIC and IC Design : Documentation Tools

    Product Name: CODESYS – IEC 61131-3 Development Tool for Industrial Controllers
    Company: 3S - Smart Software Solutions GmbH

    CODESYS Development System: Market leading IEC 61131-3 development software in the automation technology sector for PLCs and industrial controllers.

    Product Name: StackAnalyzer
    Company: AbsInt Angewandte Informatik GmbH

    StackAnalyzer automatically determines the worst-case stack usage of the tasks in your application. The analysis results are shown as annotations in the call graph and control flow graph.

    Product Name: The SPARC Architecture Manual Version 8
    Company: Aeroflex Gaisler AB

    SPARC was designed as a target for optimizing compilers and easily pipelined hardware implementations. SPARC implementations provide exceptionally high execution rates and short time-to-market development schedules.

    Product Name: AS1312 Boost Converter
    Company: austriamicrosystems AG

    The AS1312 is an ultra low IQ hysteretic step-up DC-DC converter. The AS1312 achieves an efficiency of up to 94% and is designed to operate from a +0.7V to +5.0V supply, the output voltage is fixed in 50mV steps from +2.5V to 5.0V. In order to save power the AS1312 features a shutdown mode, where it draws less than 100nA. In shutdown mode the battery is not connected to the output. If the input voltage exceeds the output voltage the device is in a feedthrough mode and the input is directly connected to the output voltage.

    Product Name: Single - Port AHB SRAM - NorFlash Controller
    Company: Barco

    The BA313A is AHB Slave Controller which provides interface to asynchronous external memory devices. It generates the control and address buses, and handless data bus buffering.

    Product Name: Cadence InCyte Chip Estimator
    Company: Cadence Design Systems, Inc.

    Decisions made during the architectural planning stages of the design cycle largely determine the chip’s resulting size, power consumption, performance, and cost. It’s during these early stages that design teams can realize the biggest benefits by considering and quantifying a variety of architectural options.

    Product Name: Schematic Drawings for Non-Electronic Applications
    Company: Capilano Computing System

    Full hierarchical design is supported with unlimited circuit size and nesting depth. Powerful command set allows top-down or bottom-up design. Multiple hierarchy modes allow for PCB, FPGA and VLSI designs.

    Product Name: SOS viaICstudio™
    Company: Cliosoft, Inc.

    SOS viaICstudio is the only design data management solution available for Mentor Graphics’ ICstudio. ICstudio seamlessly integrates with the SOS Design Collaboration platform to streamline development of complex ICs with large teams across geographically dispersed sites.

    Product Name: SOS viaLaker™
    Company: Cliosoft, Inc.

    SOS viaLaker provides unparalleled design data management and multi-site team collaboration support for Silicon Canvas Laker Custom Design Platform.

    Product Name: AHA3602C
    Company: Comtech AHA Corp.

    The AHA3602C GZIP compression core a high-speed hardware compression accelerator available for ASIC and FPGA implementations. It is fully compliant with the GZIP File Format Specification version 4.3 (RFC-1952), the ZLIB Compressed Data Format Specification version 3.3 (RFC-1950), and the Deflate Compressed Format Specification Version 1.3 (RFC-1951). The core can generate compressed files and individual deflate blocks.

    Product Name: AHA3610
    Company: Comtech AHA Corp.

    The AHA3610 GZIP compression coprocessor is a single chip CMOS VLSI device that implements the open-source GZIP (Deflate) lossless data compression and decompression algorithm. It supports a simultaneous compression/decompression data rate of 2.5 Gbits/sec, while achieving compression performance equivalent to GZIP S/W. The device implements 2 high speed 16-bit parallel DDR interfaces for easy integration in to many microprocessor based systems.

    Product Name: AHA370PCIe
    Company: Comtech AHA Corp.

    The AHA370PCIe is a PCI Express plug-in card that adds GZIP compression acceleration to data networking systems.  This card supports data rates of 10.0 Gigabits per second while achieving high compression ratios equivalent to high effort GZIP software.  Communication and storage networks require high speed compression solutions to reduce latency on communication links, reduce bandwidth on these links, and reduce media requirements when storing files to disk or tape.

    Product Name: AHA400PCIe
    Company: Comtech AHA Corp.

    The AHA400PCIe is a PCI Express plug-in card that recovers lost packets in a network. The board encodes and sends FEC source packets and repair packets through the channel. A matching decoder on the receiving end will recover lost packets. The maximum channel coded block size is 255 packets. Depending on channel conditions, not all of the repair packets need to be transmitted. When the decoder at the receiving end has received 128 packets out of the total 255 source and repair packets for that specific block then the original 128 source packets are restored and output over the PCB’s DMA interface.

    Product Name: Cosmic MISRA CHECKER
    Company: Cosmic Software

    The Cosmic Software MISRA Checker is a standalone software utility that aids in the production of well structured and portable C language code using guidelines* prescribed by the Motor Industry Software Reliability Association (MISRA). The Cosmic MISRA Checker is designed to provide comprehensive static MISRA compliance checking that executes fast enough to be used on every compile.

    Product Name: FIBEX-Editior
    Company: CRST GmbH

    The FIBEX-Editior is a software tool to create and edit FIBEX XML files.

    Product Name: Programmable System-on-Chip (PSoC®)
    Company: Cypress Semiconductor Corp.

    With its unique array of configurable blocks, PSoC® 3 is a true ystem level solution providing microcontroller unit (MCU), memory, analog, and digital peripheral functions in a single chip. The CY8C32 family offers a modern method of signal acquisition, signal processing, and control with high accuracy, high bandwidth, and high flexibility. Analog capability spans the range from thermocouples (near DC voltages) to ultrasonic signals. The CY8C32 family can handle dozens of data acquisition channels and analog inputs on every general-purpose input/output (GPIO) pin.

    Product Name: d’Cryptor XE
    Company: D Crypt Private Limited

    This is D’Crypt’s programmable cryptographic transaction token. It forms part of an intelligent, autonomous reader for contactless smart card payment. It uses the d’Cryptor QE that is certified to FIPS 140-2 Level 3 (Certificate No. 465) and provides maximum flexibility and easy configuration for the user. It can be easily interfaced with communication modules such as RF couplers and modems for contactless smart card payment system like those used in MacDonald’s and 7-11 for EZ-Link top-up. The d’Cryptor XE is currently deployed as the cryptographic processor for a back-end merchant acquirer system.

    Product Name: EasyCODE V8 SPX
    Company: EASYCODE GmbH

    EasyCODE SPX is unique and differs from conventional development environments for the main part due to its editor, which presents source code in a structured form and allows graphic advanced processing. Supported by 25 programming languages, EasyCODE SPX gives you more possibilities for working in a logical and structured manner than any other implementation system. For many programming languages, EasyCODE is also the only editor on the market today that enables structured program development.

    Product Name: EasyCODE(JAVA) V6.8
    Company: EASYCODE GmbH

    EasyCODE(JAVA) is used for simple, computer-aided development, maintenance, enhancement and documentation of JAVA programs using a structure chart method.

    Product Name: ComPOD12/StarProg
    Company: Elektronikladen

    The ComPOD12 BDM-Interface is a universal device for downloading software to HC(S)12 target systems. Together with the StarProg software, EEPROM and Flash memory areas of the 68HC12 and HCS12 microcontrollers can be programmed.

    Product Name: ecICP
    Company: ExpertControl GmbH

    Intelligent Controller Parameterization package
    Fully Automated Model Generation and Controller Parameterization/Tuning Package including PID Tuning . ecICP generates controller parameters from measured data for direct use. Different operating areas are taken into account as well as desired closed control loop dynamics requirements and even user-defined transitioning profiles between setpoints. Even strong noisy measurements are handled.

    Product Name: ecSTIMlib
    Company: ExpertControl GmbH

    The ecSTIMlib™ Blockset constitutes a powerful extension for SIMULINK™ and provides comprehensive, interactive, flexible and high quality capabilities for nonlinear actuator excitation and stimulation signal generation. All parameters can be changed at any time, independent whether the application is realtime or non-realtime.

    Product Name: MR2A16A : (MRAM)
    Company: Freescale Semiconductor Inc.

    MRAM is a nonvolatile memory technology that protects data in the event of power loss and does not require periodic refreshing. The MR2A16A is the ideal memory solution for applications that must permanently store and retrieve critical data quickly.

    Product Name: DBExplorer
    Company: ICScape Inc.

    DBExplorer is a physical design database management and data analysis platform. It hyper-links design data that it is only click to do cross probing among data domains of layout, netlist hierarchy, gate level Verilog, SDC, connectivity schematic, and clock schematics.

    Product Name: Timing Explorer
    Company: ICScape Inc.

    TimingExplorer enables designers to diagnose their timing problems and provides fix solutions. The following are the list of major features of TimingExplorer:  Browse and analyze MCMM design timing reports. Narrow down the timing violation cause. TimingExplorer can be used as a pure timing report analyzer, which is also called TimingExplorer Lite.

    Product Name: MOZAIX
    Company: Intercept Technology Inc.

    WELCOME TO MOZAIX, Intercept's high-performance schematic capture application for rapid design entry. In a single hierarchical design environment with intuitive and user-friendly features, MOZAIX allows for the fast creation and management of professional schematics in a single application. The multiple views in Mozaix allow designers to edit parts, symbols and sheets simultaneously, speeding design edit time and global design maintenance.

    Product Name: Get control over the database acess API. Code assist, state of the art debuger,
    Company: Magillem Design Services

    Magillem Generator Studio is a user-friendly and powerful environment to help designers implement, launch and debug their own executables (“generators”) in order to extend the capabilities of their IP based design environment.

    Product Name: Perforce Visual Client
    Company: Perforce Software Inc.

    P4V, the Perforce Visual Client, provides quick and easy access to versioned files through a graphical interface that is consistent across multiple operating systems. P4V is available on Windows, Solaris, FreeBSD, Mac OS X and Linux.

    Product Name: Perforce Visual Merge Tool
    Company: Perforce Software Inc.

    The Perforce Visual Merge Tool, P4Merge, allows users to visualize the differences between file versions. P4Merge uses color coding to simplify the process of resolving conflicts that result from parallel or concurrent development.

    Product Name: KGV-227 Pegasus VLSI Microcircuit
    Company: SafeNet, Inc.

    Satellite telemetry and mission data encryptor and command link decryptor. Cryptographically compatible with the KG-227 and KG-228 flight units, KI-17, Pegasus Ground Unit (MYK-17). Remote electronic keying (up to 64 keys can be indexed). Binary NRZ-L TTL format for PT and CT data, NRZ-M for CT data. Maximum data rate of 100 Mbps. Meets Level S requirements of MIL-M-38510 and MIL-STD-883.

    Product Name: CANopen Software & Tools
    Company: SYS TEC electronic GmbH

    The SYS TEC CANopen Source Code provides all functions and CANopen services required for implementing CANopen devices that comply with CANopen specification CiA 301, CiA 302 and CiA 304.

    Product Name: DiaTem Production station
    Company: TEMENTO Systems

    DiaTem StudioTM is a cost effective manufacturing test platform dedicated to Printed Circuit Board (PCB) test in a production environment.

    Product Name: Data Converters
    Company: Texas Instruments Inc.

    TI delivers a broad portfolio of data converters, touch screen controllers, analog front ends, audio converters and CODECs. Featuring high-performance 12-bit to 18-bit SAR ADCs, 16-bit to 24-bit delta-sigma ADCs, 10-bit to 16-bit pipeline ADCs, and 8-bit to 20-bit DACs, TI has a data converter for all your analog and mixed-signal applications.

    Product Name: Universal USB Development Kit for Windows
    Company: Thesycon Systemsoftware & Consulting GmbH

    The Universal Serial Bus (USB) is supported in all current Windows operating systems. Drivers for USB host controllers and USB hubs are provided as part of the operating system, as are drivers for various standard USB devices.

    Product Name: MKQRC
    Company: TOOL Corp.

    Software to generate a two-dimensional bar code (QR code model 2) symbol from a character string.

    DSP : DSP Design Tools

    Product Name: CODESYS Application Composer
    Company: 3S - Smart Software Solutions GmbH

    The CODESYS Application Composer is a development tool for the efficient creation of application variants consisting of recurring function blocks. This means that you "compose" your machine application based on modules and their parameterization. CODESYS will then automatically generate your complete PLC program.

    Product Name: AD350 Digitizer and Waveform Generator
    Company: 4DSP

    The AD350 is a low-cost, low-power digitizer and waveform generator available in the PMC form factor. The AD350 features two 14-bit A/D channel inputs sampling up to 150MSPS, and a dual-channel 16-bit 500Msps high-speed D/A converter.

    Product Name: FC6301 3U CompactPCI Virtex™ 6 VITA 57.1 FMC Expansion Port
    Company: 4DSP

    The FC6301 is a high performance CompactPCI (cPCI) card with advanced digital signal processing capabilities. The design has been targeted for customer programmable implementations of complex FPGA algorithms for Digital Signal Processing (DSP) applications.

    Product Name: FM577 Cyclone III PMC
    Company: 4DSP

    The FM577 is a low-cost, low-power 65nm FPGA-based board available in the PMC form factor. The architecture is based on two very competitive and resourceful Cyclone III FPGA devices. The FM577 offers high-functionality without compromising the performance or the ease of design.

    Product Name: FM680 Virtex-6™ XMC & PMC with User Definable Memory & I/O
    Company: 4DSP

    The very versatile FM680 is a high performance Xilinx Virtex-6™ based XMC & PMC industry standard VITA 42.3 compliant module. The FM680 has been designed to be a multi-function high-performance digital signal processor.

    Product Name: VID371 Full Camera Link Frame Grabber With Video Processing Resources
    Company: 4DSP

    The VID371 is a high performance PMC full camera link frame grabber. with two mini CL connectors. It offers fast on-board memory resources and two Cyclone III FPGA devices for real time video processing.

    Product Name: VID372 Dual Base Camera Link Frame Grabber With Video Processing Resources
    Company: 4DSP

    The VID372 is a high performance PMC full camera link frame grabber. with two mini CL connectors. It offers fast on-board memory resources and two Cyclone III FPGA devices for real time video processing.

    Product Name: VP625 Virtex™ 6 3U VPX
    Company: 4DSP

    The VP625 is a high performance VITA 46 (VPX) standard compliant card with advanced digital signal processing capabilities. The design has been targeted for customer programmable implementations of complex FPGA algorithms for Digital Signal Processing (DSP) applications.

    Product Name: VP680 Virtex™ 6 3U VPX
    Company: 4DSP

    The VP680 is a high performance VITA 46 (VPX) standard compliant card with advanced digital signal processing capabilities. The design has been targeted for customer programmable implementations of complex FPGA algorithms for Digital Signal Processing (DSP) applications.

    Product Name: Digital Signage
    Company: Advantech Co., Ltd.

    Advantech's Digital Media Platform offers embedded media-processing modules for customers to build their network digital media applications. These modules are designed using advanced media or RISC processors with enabling firmware to meet the requirement in processing high quality digital media.

    Product Name: Univers ISSIM
    Company: Adveda B.V.

    Univers ISSIM is a multi-processor development environment. The Univers ISSIM IDE enables you to develop, build, debug and simulate CPU and/or DSP applications. Applications are project-based and can be comprised of C and/or assembler  source files. Besides this, you can attach C++ peripherals.

    Product Name: DSP Builder
    Company: Altera Corporation

    DSP Builder is a DSP development tool that interfaces between the Quartus II software and The MathWorks MATLAB/Simulink tools
    Getting Started
       - Download DSP Builder
       - Visit Code:DSP Solutions Center
       - View DSP Builder Design Examples

    Product Name: Code Composer Studio V 3x– Black Hawk
    Company: Ammos Technologies Pvt LTD

    Code Composer Studio™ (CCStudio) Integrated Development Environment (IDE) is a key element of the eXpressDSP Software and Development Tools strategy from Texas Instruments. CCStudio delivers all of the host tools and runtime software support for your TMS320 DSP and OMAP based real–time embedded applications.

    Product Name: Log/Limiting Amplifier
    Company: Analog Devices

    ADI’s high gain limiting amp ICs are optimized for SFP/SFF/GBIC datacom and telecom optical transceiver modules and provide the receiver functions of quantization and Loss of Signal Detection as well as SFF-8472 compliant average power measurement. Applications include 1x2x4x Fibre Channel, 10GBASE-LX4, multi-rate SONET/SDH OC3 to OC48 FEC and GbE. ADI’s high gain limiting amps feature: low power; excellent sensitivity and jitter performance.

    Product Name: TeleUSE
    Company: Aonix North America, Inc.

    TeleUSE® from Aonix is a User Interface Management System (UIMS) which provides all the tools needed to interactively design and build fully object-oriented, OSF/Motif-based GUIs in C, C++, UIL or Ada95. TeleUSE provides the comprehensive, full-featured solution needed to support use of an object-oriented approach throughout the entire life cycle of GUI application development from concept, through design and development, to the generation of code that truly mirrors an application's object-oriented design.

    Product Name: DSP Accelerators
    Company: Athena

    Athena offers an array of function-specific DSP accelerators for high-performance and power sensitive applications. Powered by Athena's patent pending arithmetic technology, we call these functions Atomic DSP accelerators. Athena's Atomic DSP accelerators may be combined to address specific applications. Alternately, Atomic DSP accelerators may be attached to your application's existing processor to act as a DSP macroprocessor. Either way, with Athena's Atomic DSP accelerators you can realize a dramatic performance increase and an equally dramatic power saving.

    Product Name: C32025TX Digital Signal Processor Core
    Company: CAST, Inc.

    The C32025TX is a single-chip, high performance 16-bit fixed-point digital signal processor core. It implements the same instruction set as the TMS320C25 and provides the same interrupts, serial interface and timer, executing most of instructions in a single clock cycle.

    Product Name: Cosmic HCS12
    Company: Cosmic Software

    Cosmic's toolchain for the 68HC12/HCS12 family is part of a complete and uniform product line incorporating over 20 years of innovative design and development. Cosmic's familiar and easy to use software interface is available for all Freescale microcontrollers to simplify the migration between targets. All Cosmic products include one year of technical support and updates.

    Product Name: Cosmic XGATE
    Company: Cosmic Software

    Cosmic Software's XGATE Development Tool Suite delivers the features and performance needed to create cutting edge applications

    Product Name: FR-AnalyzerPro
    Company: CRST GmbH

    The FR-AnalyzerPro is a FlexRay™ and CAN monitoring software for analyzing the FlexRay and CAN bus traffic. It can be used in online and offline mode. In online mode a PC running the FR-AnalyzerPro software is connected to the FlexRay bus via the Decomsys™ Busdoctor™ or the TZM FlexCard/CycloneII®. The Busdoctor hardware allows to monitor the CAN bus simultaneously with the FlexRay bus.

    Product Name: Binary BCH for NAND Flash
    Company: ECC Technologies Inc

    ECC Tek's existing binary BCH encoder and decoder designs for NAND Flash correct t=7, 8, 14, 15, 17, or 18 bits in error in K-byte pages where K can range from 512 to 546 bytes. Designs that allow other values for t and K can quickly be developed. 4K-byte page sizes can be accommodated by repeating 512-byte segments 8 times.

    Product Name: Parallel Reed-Solomon for Fault-tolerant Systems
    Company: ECC Technologies Inc

    ECC Tek's patented Parallel RS (PRS) encoder and decoder designs are used to design fault-tolerant parallel storage and communications systems.

    Product Name: Programmable Reed-Solomon for the IEEE 802.16 Wireless Standard
    Company: ECC Technologies Inc

    ECC Tek's existing Programmable RS encoder and decoder designs for the IEEE 802.16 Wireless Standard operate on 8-bit bytes and allow "on-the-fly" programmability so that the number of errors corrected, t, and the block length, N, can be changed on-the-fly on a block by block basis without the need for any gaps between received words and the decoder latency/delay is minimized.

    Product Name: Reed-Solomon for NAND Flash
    Company: ECC Technologies Inc

    ECC Tek's existing RS encoder and decoder designs for NAND Flash correct t=5 10-bit symbols in error in K‑byte pages where K is 524 bytes. Designs that handle other t and K values can quickly be developed. 4K‑byte page sizes can be accommodated by repeating 524-byte segments 8 times.

    Product Name: Reed-Solomon for the ITU DVB Standard
    Company: ECC Technologies Inc

    The DVB RS encoder receives 188 bytes of data in a byte-serial fashion and adds 16 redundant bytes to form a packet of 204 bytes.

    Product Name: HC12compact
    Company: Elektronikladen

    HC12 microcontrollers by Freescale (formerly: Motorola) combine the best of the HC11 heritage (architecture, modules, instructions) with the power of an advanced 16 bit technology. The HC12 provides a direct migration path, so current HC11 users can easily change to higher performance and increased functionality.

    Product Name: 68K M683XX
    Company: Freescale Semiconductor Inc.

    32-bit 68K ColdFire Microcontroller

    Product Name: MC56F81xx
    Company: Freescale Semiconductor Inc.

    Digital Signal Controller

    Product Name: hyNet S
    Company: Hyperstone GmbH

    Benefit from both: the unique, highly efficient and easy to program Hyperstone RISC/DSP architecture combined with the most necessary interfaces and features required for network enabling and communications within the embedded applications world.

    Product Name: hyNet XS
    Company: Hyperstone GmbH

    Benefit from both, the unique, highly efficient and easy to program Hyperstone RISC/DSP architecture combined with the most necessary interfaces and features required for network enabling and communications within the embedded applications world.

    Product Name: COPLAN
    Company: IMST GmbH

    Library for Agilent's ADS Software. Coplan comes with a lot of approved models for coplanar circuit simulations. COPLAN is a Design Tool for Coplanar Circuits in the Environment of HP-EEsof Series IV, LibraTM and Agilents ADSTM

    Product Name: EMPIRE XCcel
    Company: IMST GmbH

    EMPIRE is a versatile 3D electromagnetic field simulator based on the powerful 3D Finite Difference Time Domain Method (FDTD) which has become a standard for RF component design. Its applicability ranges from analyzing planar structures, interconnects, and multi-port multilayer packages to waveguides, antennas and EMC problems.

    Product Name: MultiLib
    Company: IMST GmbH

    MultiLibTM is a new state-of-the-art model library, which includes all standard elements for analog high-frequency multi-layered circuit designs, such as LTCCs, PCBs and others.

    Product Name: TOPAS
    Company: IMST GmbH

    TOPAS - TransistOr PArameter Scaleable model is a high precision non-linear transistor model for the simulation of any FET-type structure based upon different material systems such as GaAs, InP or even Si.

    Product Name: Tenilica ConnX HiFi2
    Company: IntegrIT

    IntegrIT Nature DSP Signal+ for Tensilica HiFi2 is a collection of signal processing functions needed for implementation of typical digital signal processing algorithms. All functions are manually optimized for Tensilica HiFi2 DSP utilizing full data bus bandwidth and computing power of the HiFi2.

    Product Name: VisualSim DSP and Image Processing Modeler
    Company: Mirabilis Design Inc.

    he DSP and communications library provides basic DSP functions and standard communications functions.  The Communications Library provides Convolution Encoders, Viterbi and Hammard coding for the physical layer of communication systems.

    Product Name: LicenseMonitor™
    Company: Runtime Design Automation

    LicenseMonitor™ is a software license tracking tool providing current and historical license utilization reporting capabilities.  Software license availability and usage statistics gathered from FLEXlm™, RLM™, LUM™, and other license managers is monitored in real-time, making it a powerful software license management tool for any CAD/IT manager. 

    Product Name: Sasken Multimedia Subsystems
    Company: Sasken (Formerly Silicon Automation Systems Inc.)

    The challenge in the space of smart phone technology lies in creating world class and compelling multimedia and messaging solutions on an Application Processor/OpenOS environment.

    Product Name: MemMax
    Company: Sonics, Inc.

    The Sonics MemMax® Memory Scheduler provides significant performance increases through unprecedented control and management of concurrent accesses to shared off-chip DRAM. As system-on-chip complexity grows, one of the largest roadblocks to success is costly, inefficient access to shared, off-chip memory. The Sonics MemMax Memory Scheduler provides Quality of Service (QoS) guarantees to initiator cores, drastically lowering the risk of starving high-demand initiators such as DSPs and graphics processors.

    Product Name: Display Controller
    Company: TES Electronic System Solutions Ltd.

    CDC-200 is a fully customizable display controller IP supporting OpenWF display API specification. A number of features can be configured both at synthesis time and at run time. In this way the display controller can be adapted to both FPGA systems (limited features, special applications) or for an ASIC (generic feature set, more flexibility.) At compile time, the most important features that can be configured are, (A)RGB formats, number of layers, alpha blending technique. The maximum number of (A)RGB layers is only dependent on the bus bandwidth and timing constraints. CDC-200 can support AMBA APB and AHB/AXI as well as the Altera AVALON bus interface.

    Product Name: TMS320™ DSP Platforms
    Company: Texas Instruments Inc.

    Digital Signal Processing (DSP) offers technologies for innovative system development and application design. Find Digital Signal Processors, System Solutions, DaVinci Technology, Software Development Tools, Codecs, Algorithms, and more

    Product Name: VS1000 - Ogg Vorbis Player IC with USB
    Company: VLSI Solution Oy

    VS1000 is a single-chip Ogg Vorbis (license-free audio codec) player. VS1000 contains a high-performance low-power DSP core VS_DSP4, Nand Flash interface, Full Speed USB port, general purpose I/O pins, SPI, UART, as well as a high-quality variable-sample-rate stereo DAC, and an earphone amplifier and a common voltage buffer.

    Product Name: VS1001k - MPEG AUDIO CODEC
    Company: VLSI Solution Oy

    VS1001 is a single-chip solution for an MPEG layer 3 audio decoder including a digital to analog converter and earphone amplifier. The chip contains a high-performance low-power DSP processor core (VS_DSP2), working memory, 4 kBytes of program RAM and 0.3 kBytes of data RAM for user applications, serial control and input data interfaces, and high-quality oversampling variable-sample-rate stereo DAC.

    Product Name: VS1033 - MP3/AAC/WMA/MIDI AUDIO CODEC
    Company: VLSI Solution Oy

    VS1033 is a single-chip MP3/AAC/WMA/MIDI audio decoder and ADPCM encoder. It contains a high-performance, proprietary low-power DSP processor core VS_DSP4, working data memory, 5 KiB instruction RAM and 0.5 KiB data RAM for user applications, serial control and input data interfaces, upto 8 general purpose I/O pins, an UART, as well as a high-quality variable-sample-rate mono ADC and stereo DAC, followed by an earphone amplifier and a common buffer.

    Product Name: Terbium Developer Kits (TDK)
    Company: Western Design Center, Inc.

    WDC's Terbium Developer Kits (TDK) provides the user with a complete kit to begin application development and familiarization with the reconfigurable and expandable 65xx programmable Verilog RTL technology family. Each kit is a minimal System on Programmable Chip example based on WDC’s Verilog IP Cores.

    Product Name: Xilinx System Generator for DSP
    Company: XILINX

    Xilinx is disclosing this Document and Intellectual Property (hereinafter "the Design") to you for use in the development of designs to operateon, or interface with Xilinx FPGAs. Except as stated herein, none of the Design may be copied, reproduced, distributed, republished, downloaded, displayed, posted, or transmitted in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Xilinx.

    PCB Design Tools : EM Simulation Software

    Product Name: HyperLynx SI/PI/EMI/Thermal Simulation System
    Company: Peace Giant Corporation

    HyperLynx® offers a complete suite of analysis and verification software that meets the needs of PCB engineers at any point in the board design flow. Easy to use and integrate into your flow, HyperLynx equips PCB engineers to efficiently analyze, solve and verify critical requirements to avoid costly re-spins. Achieve greater innovation, faster time-to-market and decreased costs with HyperLynx.

    Embedded Processor Development

    Product Name: aiCache
    Company: AbsInt Angewandte Informatik GmbH

    aiCache is a tool for predicting a program's intrinsic instruction cache behavior. In other words, aiCache classifies most references to the instruction memory (instruction fetches) as cache hits or misses.

    Product Name: aiT
    Company: AbsInt Angewandte Informatik GmbH

    aiT WCET Analyzers statically compute tight bounds for the worst-case execution time (WCET) of tasks in real-time systems. They directly analyze binary executables and take the intrinsic cache and pipeline behavior into account.

    Product Name: AES-HM76Z1FL
    Company: Acrosser Technology Co.,Ltd.

    Fanless and Ultra Slim Intel HM76 Embedded System, supports Intel Ivy Bridge CPU, with 2 x HDMI, 4 x COM, 3 x USB3.0, 2 x GbE, 1 x MiniPCIe, 1 x SIM

    Product Name: AR-ES0892
    Company: Acrosser Technology Co.,Ltd.

    The AR-ES0892 is a system product mainly for gamming machine. With
    high-performance CPU board,

    Product Name: AR-ES0892
    Company: Acrosser Technology Co.,Ltd.

    Support Core 2 Duo/Core Duo/Celeron M
    Support Dual Channel DDR2 up to 2GB
    VGA/DVI/LVDS/TV-Out 6 Serial pORT (5 Port with Easy-Plug Connector)
    PCI & PCI Express x 16 Expansion
    Remote Power Switch Jack

    Product Name: AR-ES5432FL
    Company: Acrosser Technology Co.,Ltd.

    (Intel Atom)Fanless Intel Atom and Intel 945GSE Embedded System

    Product Name: AR-ES5890
    Company: Acrosser Technology Co.,Ltd.

    Intel Core 2 Duo Embedded System with VGA, DVI, LAN, 5 x COM, 9 x USB2.0, 1 x PCI Express x16

    Product Name: GEME-4000/5000 Series
    Company: ADLINK TECHNOLOGY INC.

    The ADLINK GEME-4000/5000 is the most dynamic solution of the GEME family, offering faster CPU speeds and complete support for the latest chipsets. This product fully meets embedded controller requirements and is compact in size, allowing front side access.

    Product Name: Embedded Single Board Computers
    Company: Advantech Co., Ltd.

    Advantech’s 3.5” single board computers are highly expandable with Module I/O 160 (MIO/160), which is an open-architecture expansion bus developed by Advantech. This is a timely way to expand a single board computer’s IO’s to fit with vertical market’s needs such as gaming, traffic surveillance and factory automation.

    Product Name: Embedded Software
    Company: Advantech Co., Ltd.

    Advantech embedded software packages “enhance quality of life with Advantech platforms together with Microsoft Windows Embedded Technology.”

    Product Name: Industrial Motherboards
    Company: Advantech Co., Ltd.

    Advantech industrial motherboard series range from Mini-ITX, MicroATX to ATX form factor boards. These industrial motherboard series are built with standard form factors which allow customers to seamlessly upgrade without compatibility issues. The standard ATX mounting holes and I/O bracket area are ready-to-use and reduce cabling as well as total cost. Commercial motherboards typically have a short life-cycle, so Advantech industrial motherboard series: Mini-ITX, MicroATX and ATX have strict revision control, which means engineering changes are kept to a minimum to reduce the high cost of design changes and reduce costly maintenance and upgrade efforts. These industrial motherboard series are ideal solutions for customers who are used to using commercial off-the-shelf products but require the flexibility of PCIe, PCI-X, PCI and AGP card expansion with industrial features such as longevity, reliability and manageability.

    Product Name: Slot CPU Cards
    Company: Advantech Co., Ltd.

    Advantech’s half-size CPU cards are designed to include industry-standard ISA, PCI or PCIe gold fingers for easy expansion. Half-size CPU cards support a full range of performance options, from 386 to Pentium M-level CPUs, as well as great expansibility, from ISA to PCI and PCI Express.

    Product Name: Stackable SBCs (PC/104, EPIC, EBX & 5.25" Biscuit)
    Company: Advantech Co., Ltd.

    Advantech has improved and simplified the way customers find the solution they need by defining a new family of products that more accurately match application requirements. Advantech's new "Stackable Family" includes five open standard form factors as defined by the PC/104 Embedded Consortium.

    Product Name: Nios II IDE
    Company: Altera Corporation

    The Nios® II Integrated Development Environment (IDE) is the primary software development tool for the Nios II family of embedded processors. You can accomplish all software development tasks within the Nios II IDE, including editing, building, and debugging programs.

    Product Name: ThreadX – Express Logic
    Company: Ammos Technologies Pvt LTD

    ThreadX is Express Logic's advanced Real-Time Operating System (RTOS) designed specifically for deeply embedded applications. ThreadX has many advanced features, including its picokernel™ architecture, preemption-threshold,™ event-chaining,™ and a rich set of system services. Combined with its superior ease-of-use, ThreadX is the ideal choice for the most demanding of embedded applications

    Product Name: Blackfin® 16/32-bit embedded processors
    Company: Analog Devices

    Blackfin® 16/32-bit embedded processors offer software flexibility and scalability for convergent applications: multi-format audio, video, voice and image processing, multi-mode baseband and packet processing, control processing, and real-time security.

    Product Name: BEACON
    Company: Applied Dynamics International

    BEACON is a powerful software engineering tool suite focused on the design, implementation, test, and maintenance of high-integrity embedded systems, including those developed per RTCA/DO-178B. BEACON’s graphical designer and multiple code generators work together to prevent many types of software errors from reaching the resultant code.

    Product Name: AT91SAM 32-bit ARM-based Microcontrollers
    Company: Atmel Corporation

    Atmel’s AT91SAM7S, AT91SAM7SE, AT91SAM7X and AT91SAM9 Smart ARM®-based microcontrollers offer:
    • Proven architecture based on ten years’ experience in ARM-based standard products
    • Deterministic behavior:

    Product Name: CX9020-011T
    Company: Beckhoff Automation GmbH

    The CX9020 is a compact, DIN rail-mountable Ethernet control system with 1 GHz ARM Cortex™ A8 CPU. The connection for the Beckhoff I/O systems is directly integrated into the CPU module. The unit offers automatic bus system identification (K-bus or E-bus) and independently switches in the corresponding mode. The CX9020 comprises the CPU with two microSD card slots, the internal RAM and 128 kB NOVRAM as non-volatile memory. The basic configuration also includes two switched Ethernet RJ 45 interfaces, four USB-2.0 interfaces and a DVI-D interface. The RJ 45 interfaces are connected to an internal switch and offer a simple option for creating a line topology without the need for additional Ethernet switches.

    Product Name: Embedded PC CX1000
    Company: Beckhoff Automation GmbH

    The CX1000 system covers the whole range of Beckhoff control technology both in terms of price and performance: The product range is designed for tasks requiring the characteristics and computing capacity of Industrial PCs, but whose budget does not stretch to full-blown Industrial PCs. The system only uses those components that are actually required. For example, a CX1000 can be operated in “headless” mode, i.e. without display or keyboard; in this case, the associated interface is not required.

    Product Name: C68000-AHB 32-bit Microprocessor Core
    Company: CAST, Inc.

    Implements a powerful 32-bit microprocessor is derived from the Motorola MC68000 microprocessor. The core uses an AMBA-compatible AHB master interface, making it an ideal processor solution for low-cost, AHB-based System on Chip (SoC) applications.

    Product Name: DDR2-SDRAM-CTRL DDR/DDR2 SDRAM Memory Controller Core
    Company: CAST, Inc.

    The DDR2-SDRAM-CTRL core provides a simplified, pipelined and burst-optimized interface to all industry-standard DDR and DDR-II SDRAM devices currently on the market.

    Product Name: SHA-256 256-bit SHA Cryptoprocessor Core
    Company: CAST, Inc.

    The SHA-256 core is a fully compliant implementation of the Message Digest Algorithm SHA-256. It computes a 256-bit message digest for messages of up to (264 – 1) bits.

    Product Name: editLogic
    Company: Coastal Logic, Inc.

    editLogic allows you to open, edit and save Program Code directly to Matrix without ever opening the Business application or issuing a single line of MQL. It includes custom interfaces for creating and editing Programs and JPOs (including compilation), creating, editing and cross-referencing eService Triggers, viewing AEF Mapping information, and much more.

    Product Name: HFC-8S
    Company: Cologne Chip AG

    The HFC-8S is a HDLC B- and D-channel controller with 8 integrated S/T interfaces. It can be used for ISDN basic rate lines. All channels are served fully duplex by deep FIFOs. Also implemented is a PCM128 / PCM64 / PCM30 highway interface (which is able to connect to many telecom serial busses) and an universal external bus interface.  

    Product Name: HFC-S active
    Company: Cologne Chip AG

    The HFC-S active is an ISDN telecommunication microprocessor system on a single chip (SoC). It is based on a powerful 32-Bit ARM7TDMI RISC processor with 16- and 32-bit instruction set. This industrial standard processor includes on-chip debugging facilities (embedded ICE).

    Product Name: HFC-S mini
    Company: Cologne Chip AG

    The HFC-S mini is a single-chip ISDN S/T HDLC basic rate controller for embedded applications. The S/T interface, HDLC-controllers, FIFOs and a microprocessor interface are integrated in the HFC-S mini.

    Product Name: XHFC-1SU
    Company: Cologne Chip AG

    The XHFC-1SU is an ISDN transceiver chip for one ISDN S/T or UpN/Up0 Basic Rate Interface with integrated HDLC controllers for all kinds of BRI equipment. The integrated microprocessor bus interface of the XHFC-1SU can be configured to 8 bit parallel microprocessor interface or serial processor interface (SPI). A PCM128 / PCM64 / PCM30 interface for CODEC or inter-chip connection is also integrated. The deep FIFOs of the XHFC-1SU are realized with an internal SRAM.

    Product Name: APS3R
    Company: Cortus

    The APS3R is a fully 32 bit general purpose CPU designed specifically to meet the needs of embedded systems. The APS3R is an enhanced version of the APS3, with improved performace for a fractional increase in silicon area. The instructions are 16 bits in length, with a 16 bit extension when needed (no mode switches necessary) giving excellent code density. The pipeline features out-of-order execution enabling nearly all instructions to execute in a single cycle, including loads and stores. Interrupts are fully vectored and the architecture ensures a minimum of software overhead in task switches. The processor was designed to execute high level languages, notably C, with ease. The software application can be entirely realised in C, interrupt routines included. The entire GNU GCC toolsuite has been ported to this architecture and is available free of charge.  

    Product Name: APS5
    Company: Cortus

    The APS5 is a fully 32 bit general purpose CPU, designed to provide meet and exceed the needs of the most demanding embedded systems. It provides higher throughput integer processing than the APS3 with increased configurability, notably with a tightly integrated co-processor interface.

    Product Name: FPS6
    Company: Cortus

    The FPS6 is a fully 32 bit general purpose CPU featuring single precision floating point, designed to meet the needs of the most demanding embedded systems. The FPS6 is a modern processor with a high throughput RISC core coupled with a floating point ALU to boost performance. It has a full Harvard architecture. The instructions are 16 bits in length, with a 16 bit extension when needed (no mode switches necessary) giving excellent code density. The pipeline features out-of-order execution enabling nearly all integer instructions to execute in a single cycle, including loads and stores. Interrupts are fully vectored and the architecture ensures a minimum of software overhead in task switches. The processor was designed to execute high level languages, notably C, with ease. The software application can be entirely realised in C, interrupt routines included. The entire GNU GCC toolsuite has been ported to this architecture and is available free of charge.

    Product Name: COSMIC 68HC05
    Company: Cosmic Software

    Cosmic's toolchain for the 68HC05 family is part of a complete and uniform product line incorporating over 20 years of innovative design and development. Cosmic's familiar and easy to use software interface is available for all Freescale microcontrollers to simplify the migration between targets.

    Product Name: High Performance Computing (HPC)
    Company: Dini Group

    "Dini Group is the future of FPGA Cluster Computing, High Performance Computing (HPC) and ASIC prototyping."

    Product Name: EUROS RTOS
    Company: EUROS Embedded Systems GmbH

    EUROS is a real-time operating system that takes into consideration the requirements in the embedded field by
    • minimal memory requirements,
    • short response times,
    • flexible communication mechanisms and
    • a large set of available drivers and protocol stacks.

    Product Name: EUROSkit
    Company: EUROS Embedded Systems GmbH

    EUROSkit a comprehensive stand-alone cross-development environment is now available, based on a powerful editor with project manager, integrating all development tools. There is special support for developing EUROS application with EUROSkit

    Product Name: EUROSmot
    Company: EUROS Embedded Systems GmbH

    As an alternative to EUROS we offer the static real time operating system EUROSmot, especially designed for automotive applications. It supports the OSEK API in different conformance classes.

    Product Name: BenchX
    Company: Express Logic, Inc

    Express Logic’s BenchX™ Integrated Development Environment (IDE) is a full–featured, Eclipse-based tools solution for embedded systems. The Eclipse community’s efforts have ushered in a new generation of IDEs and tools that can be adapted for use with embedded systems. Express Logic’s BenchX, its own new Eclipse-based Integrated Development Environment, is tailored for embedded development, and supports the ARM7/ARM9 architecture (Cortex, Power Architecture, ColdFire, and MIPS processor architectures coming soon) .

    Product Name: FileX
    Company: Express Logic, Inc

    FileX is Express Logic's high-performance MS-DOS compatible file system. It is fully integrated with ThreadX and is available for all supported processors. Like ThreadX, FileX is designed to have a small footprint and high-performance, making it ideal for today's deeply embedded applications that require file operations.

    Product Name: ThreadX
    Company: Express Logic, Inc

    ThreadX is implemented as a C library. Only the features used by the application are brought into the final image. The minimal footprint of ThreadX is under 2KB on Microcontrollers.

    Product Name: USBX
    Company: Express Logic, Inc

    USBX is Express Logic's high-performance USB host, device, and On-The-Go (OTG) embedded stack. It is fully integrated with ThreadX and is available for all ThreadX supported processors. Like ThreadX, USBX is designed to have a small footprint and high-performance, making it ideal for today's deeply embedded applications that require to interface with USB devices or be connected with a Windows/Apple/Linux desktop over USB.

    Product Name: NP-2 Network Processor
    Company: EZchip Technologies Ltd.

    EZchip’s NP-2 is a highly-flexible network processor with integrated traffic managers providing wire-speed packet processing and advanced flow-based bandwidth control. The NP-2 offers the speed of an ASIC combined with the flexibility of a programmable microprocessor. It provides the silicon core of next-generation Carrier Ethernet Switches and Routers (CESR).

    Product Name: NP-3 Network Processor
    Company: EZchip Technologies Ltd.

    EZchip’s NP-3 is a highly-flexible network processor with integrated traffic managers providing wire-speed packet processing and advanced flow-based bandwidth control. The NP-3 offers the speed of an ASIC combined with the flexibility of a programmable microprocessor. It provides the silicon core of next-generation Carrier Ethernet Switches and Routers (CESR).

    Product Name: CodeWarrior Development Tools
    Company: Freescale Semiconductor Inc.

    Innovation is the driving force behind CodeWarrior™ Technology. As a complete software development tool solution, the backbone of all of our software tools is the CodeWarrior™ integrated development environment (IDE). Using the CodeWarrior IDE, developers get the benefit of using common functionality across a broad range of Freescale processors and platforms. When combining the complete CodeWarrior offerings — IDE, compiler, debugger, editor, linker, assembler, run control devices, etc.

    Product Name: ColdFire+/ColdFire MCUs and Processors
    Company: Freescale Semiconductor Inc.

    ColdFire+ is next generation ColdFire products which combine cutting-edge, low-power performance with a diverse set of analog, connectivity and security peripherals, all contained in cost-effective, small footprint packages.

    Product Name: Embedded MCU + Power
    Company: Freescale Semiconductor Inc.

    These devices combine the technologies of SMARTMOSTM with microcontrollers (M68HC908EY family w/FLASH memory) in a single integrated circuit package (2 separate and interconnected die).

    Product Name: HC08
    Company: Freescale Semiconductor Inc.

    Small, general purpose, low-power, feature rich. Highly integrated, general purpose devices with ADC, analog comparator, multiple communications options, timers, and on-chip ICE

    Product Name: HCS08
    Company: Freescale Semiconductor Inc.

    High-performance and low power, the HCS08 does not sacrifice performance to provide low power 1.8 V operation. HCS08 Features - Multiple power management modes, including a 20 nanoamp (nA) power-down mode

    Product Name: MC9RS08KA2 : 8-Bit Microcontroller
    Company: Freescale Semiconductor Inc.

    RS08KA microcontrollers are general purpose 8-bit devices for the ultra low-end market. Featuring RS08 architecture, RS08KA devices are specifically crafted to be more efficient and cost effective for small memory size microcontrollers.

    Product Name: 68K/CPU32
    Company: Green Hills Software, Inc.

    The Green Hills Optimizing Compiler for 68K/CPU32 uses a common code generator with architecture-specific optimizations. Each supported processor model has its own particular pipeline and instruction set characteristics.

    Product Name: ARM
    Company: Green Hills Software, Inc.

    Green Hills Software provides complete solutions for the development of embedded and real-time applications built on ARM processors.

    Product Name: MULTI® Integrated Development
    Company: Green Hills Software, Inc.

    Green Hills Software’s MULTI integrated development environment (IDE) includes the industry’s most powerful and proven tools for developing embedded software with maximum reliability, maximum performance, and minimum code size. With the MULTI IDE’s sophisticated capabilities, you can develop, debug, and optimize code more quickly, significantly reducing both development cost and time.

    Product Name: RAD750 Development Tools
    Company: Green Hills Software, Inc.

    The RAD750 is a radiation-hardened single board computer, based on IBM's PowerPC 750. The successor of the RAD6000, the RAD750 is manufactured by BAE Systems. It is intended for use in high radiation environments such as experienced on-board satellites and spacecraft.

    Product Name: SuperTrace Probe
    Company: Green Hills Software, Inc.

    For systems using a microprocessor with no built-in trace port, Green Hills Software’s TraceEdge trace collection solution makes it possible to tap in to the advantages of the MULTI TimeMachine Suite without switching microprocessors.

    Product Name: FLASHit Compact-Version
    Company: hse-electronics GmbH

    The Compact-Version of FLASHit is bounded with a specially service of hse-electronics. You send us your HEX-file which is intended for your customers. We will add this file to FLASHit oem and send it back to you. Now you have a „one file“ version of FLASHit (1 MB + HEX-file). This Version can be copied as often as you want.

    Product Name: IB520
    Company: IBASE Technology Inc

  • Embedded AMD Geode LX processors
    Supports 433MHz (LX700) / 500MHz (LX800)
  • DDR SO-DIMM x 1, Max. 1GB
  • Onboard Realtek 8100C 10/100 Ethernet
  • Integrated LX800/LX700 2D VGA controller,
    Supports CRT and TFT LCD display
  • 4 x USB 2.0, 2 x COM, CF socket
  • Watchdog timer, Digital I/O
  • PCI-104 expansion, optional PCMCIA connector
  • Product Name: IB805
    Company: IBASE Technology Inc

    • Onboard Intel® Atom™ Processor N270,
      1.6GHz speed, 533MHz FSB
    • 1x DDR2 SO-DIMM, Max. 2GB
    • Intel® 82574L Gigabit LAN
    • Integrated VGA , supports CRT and LVDS
    • 2x SATA, 4x USB 2.0, 2x COM
    • 1x PCI-104 on board, Watchdog timer

    Product Name: IB868
    Company: IBASE Technology Inc

  • Supports Pentium® M / Celeron® M processors
  • Two DDR2 SDRAM DIMM, Max. 2GB
  • Onboard 10/100 BaseT, optional Gigabit Ethernet
  • Intel® 915 Express VGA for CRT / LVDS, dual display
  • 6x USB 2.0, 2x COM, Watchdog timer, Digital I/O
  • Optional backplane with 3x PCI-E(x1), 1x PCI-E (x16), 4x PCI slots
  • Product Name: Fusiv® Vx180
    Company: Ikanos Communications

    The Fusiv® Vx180 is an integrated gateway processor that provides a MIPS-based™ CPU core, VoIP capabilities, security, and best-in-class QoS. It includes a multi-mode VDSL2 data pump that’s backward compatible to ADSL2+, ADSL2, and ADSL for flexibility across a range of service provider deployments.  

    Product Name: VoIP Terminal Adaptors
    Company: Ikanos Communications

    Voice over internet protocol (VoIP) is one of the fastest growing segments of the triple-play market.  Providing a lightweight and inexpensive way to address customer demand is the role of the VoIP terminal adapter (TA). 

    Product Name: MIPS Warrior Processor Cores
    Company: Imagination Technologies Ltd.

    In August 2013, Imagination announced the new MIPS Series5 Warrior CPU cores. These cores incorporate new architectural features and provide best-in-class performance and efficiency for a wide range of applications.

    Product Name: IC-e6-cPCIa
    Company: INTERFACE CONCEPT

    SBC based on MPC7447A/MPC7448 processor (3200DMIPS @ 1,4GHz) equipped with Marvell Discovery III chipset that provides two Gigabit Ethernet ports routed on the J2 connector..  SDRAM-DDR up to 512MB, Flash up to 64MB, one USB2 controller, 4 GPIO on J2, one PMC slot...

    Product Name: IC-e6-cPCIb
    Company: INTERFACE CONCEPT

    IC-e6-cPCIb is a CompactPCI processor board based on the Freescale e600 processors MPC7447A or MPC7448. It is designed to provide the highest level of performance and integration available today.

    Product Name: IC-e6-PMCa
    Company: INTERFACE CONCEPT

    PrPMC module based on MPC7447A/MPC7448 processor (2.1MIPS @ 1GHz) equipped with Marvell Discovery III chipset that provides three Gigabit Ethernet ports.

    Product Name: IC-PQ3-PMCb
    Company: INTERFACE CONCEPT

    IC-PQ3-PMCb is powered by a MPC8541E or a MPC8555E, being part of the PowerQUICC™III processor family. This e500 core is a 2-way super-scalar and 7-stage pipeline design with out-of-order issue and execution. The core implements three integer units : two simple (1-cycle Ops) and one complex for integer multiply, divide.

    Product Name: USBware™
    Company: Jungo Ltd

    USBware™ offers a complete, high quality and small footprint embedded USB software protocol stack, allowing device manufactures to easily incorporate standard USB connectivity in their designs.

    Product Name: Gusto High Density NVM
    Company: Kilopass Technology, Inc.

    Gusto™ is the industry’s first and only 4Mb embedded non-volatile memory (NVM). It is built using standard, commercially available CMOS logic process technologies and utilizes Kilopass’ patented 2T antifuse bitcell with proven security critical for secure code storage applications.   Broadening NVM storage capacity beyond just configuration and keys — with Gusto™ you can now store code, such as firmware, on-chip.  

    Product Name: WiBear 11n
    Company: lesswire AG

    The WiBear 11n is an ultra-compact, automotive-grade WLAN & Bluetooth front-end module with an extended temperature range from -40 °C to +85 °C.

    Product Name: µC/OS-II Kerne
    Company: Micriµm Technologies Corporation

    The μC/OS-II is a portable, ROMable, scalable, preemptive, real-time deterministic multitasking kernel for microprocessors, microcontrollers and DSPs. Offering unprecedented ease-of-use, μC/OS-II is delivered with complete 100% ANSI C source code and in-depth documentation. μC/OS-II runs on the largest number of processor architectures, with ports available for download from the Micrium Web site.

    Product Name: DRAM
    Company: Micron Technology, Inc.

    we’ve developed multiple generations of DRAM technology, including leading-edge DDR3, in countless densities and configurations. So no matter what you’re designing, Micron has a memory solution that’s right for your application.

    Product Name: AM/DM37x EVM
    Company: Mistral Software Inc

    The AM37x EVM and/or DM37x EVM from Mistral is a highly integrated and easy-to-use development platform based on TI's AM/DM37x Sitara Microprocessor. Designed with a modular and extendable architecture, the EVM helps developers leverage the benefits of the powerful AM/DM37x processor comprising of the advanced Superscalar ARM® Cortex™-A8 RISC core with NEON co-processing.

    Product Name: CompactRISC Core Architecture
    Company: National Semiconductor

    The CompactRISC architecture was created from the ground up as a scalable architecture, covering the 16-bit embedded processor domain, while providing the best of RISC and CISC architectures. It established itself in applications that require significant embedded performance, but cannot afford the size and cost overhead of full 32-bit RISC implementations.

    Product Name: RTS 2706 Customizable 200 MHz High-Speed Real-Time Recording and Playback System
    Company: Pentek Inc.

    The Model 4295 Quad G4 PowerPC targets embedded applications requiring high-performance interfaces. Featuring
    four Freescale MPC7410’s, the Model 4295 supports numerous high-speed interfaces including VIM, PMC, RACEway, VME64 and Ethernet.

    Product Name: MPI12x
    Company: profichip GmbH

    The profichip MPI12x is a communication chip with processor interface for MPI applications. The MPI12x handles the message and address identification, the data security sequences and the protocol processing for PROFIBUS, which is the underlying transmission protocol.

    Product Name: VPCLS2
    Company: profichip GmbH

    The VPCLS2 is a single-chip-solution for PROFIBUS-DP (EN50170) in the area of digital I/Os. There is no external micro-controller necessary. The VPCLS2 is pin- and function compatible with the existing LSPM2 circuit from Siemens

    Product Name: Embedded PLC
    Company: Rabbit Semiconductor (acquired by Digi)

    The Embedded PLC Application Kit enables a Rabbit 3000 based single-board computer to be programmed using a standard software environment that is commonly used to program PLC's (Programmable Logic Controllers).

    Product Name: Rabbit 4000 Microprocessors
    Company: Rabbit Semiconductor (acquired by Digi)

    The new Rabbit 4000 is a high-performance, low-EMI microprocessor designed specifically for embedded control, communications, and Ethernet connectivity. The Rabbit 4000 outperforms most 16–bit processors without losing the efficiency of an 8–bit architecture.

    Product Name: Rabbit® 5000 Microprocessors
    Company: Rabbit Semiconductor (acquired by Digi)

    The Rabbit 5000 is the next generation of Rabbit microprocessors designed specifically for embedded control, communications, and network connectivity. Extensive integrated features facilitate rapid hardware design, while a C-friendly instruction set promotes efficient development of even the most complex applications.

    Product Name: MYK-11 VLSI ASIC
    Company: SafeNet, Inc.

    The MYK-11 VLSI ASIC can encrypt or decrypt using the KG-46, KG-57, and KG-96 alogrithms. It is available as engineering models and at higher qualifications levels up to QML-V Level. The unit is a Rad Hard VLSI chip for embedment applications.

    Product Name: WLA-7HS
    Company: SafeNet, Inc.

    SafeNet GSD's WLA-7HS Wireline Interface Adapter Module was developed specifically to interface communications equipment with field wire at data rates from 1.2 kbps to 2.048 Mbps at distances up to 4 kilometers.

    Product Name: CDK™ Model Space Explorer
    Company: SANKHYA Technologies

    The SANKHYA Dynamically Targetable Tools Framework™ (DTTF) and SANKHYA CPUDesign Kit (CDK) provide a set of dynamically targetable compiler tools, which canbe quickly configured for new processors or processor variants. These tools obtaininformation about the processor from SANKHYA Machine Description Language(SMDL) model of the processor.

    Product Name: SANKHYA Varadhi
    Company: SANKHYA Technologies

    SANKHYA Varadhi is a middleware and communication solution that can be used to integrate applications and develop distributed object oriented applications. Varadhi can speed up the development of distributed applications by as much as 90% when compared to the use of transport layer technologies like sockets. Varadhi enables distribution of software across Windows, Linux and Solaris hosts and embedded systems like mobile phones and PDAs.

    Product Name: Varadhi Enterprise
    Company: SANKHYA Technologies

    Varadhi Enterprise is an innovative product that combines the most important capabilities of an application server, integration framework, content manager and a portal into a single enterprise application platform. Varadhi forms a solid foundation for developing web services, n-tier applications, portals, application federations and web adapters for legacy applications.

    Product Name: ZBrain BF533-32M
    Company: Schmid Engineering AG

    ZBrains are CPU Modules based on Blackfin Processors by Analog Devices. Processor, peripherals, programmable logic and additional memory banks are integrated on a half credit card format. Easy to integrate. LabVIEW Embedded fully supported

    Product Name: COMBImodul-C12
    Company: SYS TEC electronic GmbH

    This compact controller is suitable as a decentral control and sensor / actor interface for scalable automation tasks based on the CANbus.

    Product Name: DIPmodul-164
    Company: SYS TEC electronic GmbH

    This tiny yet highly cost-effective insert-ready Single-board computer is based on the Infineon C164CI 16-bit microcontroller in MQFP-80 packaging.

    Product Name: ECUcore-5484
    Company: SYS TEC electronic GmbH

    Focusing on applications that require a high degree of embedded computing power, the SBC module ECUcore-5484 combines a fast CPU, a high-performance memory layout and a variety of communication interfaces. Measuring just 40mm x 70mm, the SBC module comes with two CAN2.0B interfaces, four UARTs and two 10/100Mbps Fast Ethernet interfaces. It targets applications that require high-speed data acquisition and real-time communication, such as PLC applications or Ethernet POWERLINK. The SBC module ECUcore-5484 comes pre-programmed with Linux-OS.

    Product Name: IEC 61131-3 Control Solutions
    Company: SYS TEC electronic GmbH

    SYS TEC controls, whether standard module or customer-specific, are characterized by an open system structure. Simply expand the local I/Os with additional CANopen I/O devices.

    Product Name: PLCcore-9G20
    Company: SYS TEC electronic GmbH

    Developing modern and sophisticated control systems requires versatile, interdisciplinary know-how. This does not only involve hardware and application development. In fact, operating system adaptations, the connection of communication and field- buses as well as data exchange between processes running in parallel become necessary. By applying the PLCcore-9G20 as PLC kernel in user-specific controls this development effort can be minimized.

    Product Name: CES-471
    Company: Taiwan Commate Computer Inc.(COMMELL)

    • Support Intel® Core™ 2 Duo mobile processor Merom with Socket P @ 533/800 MHz FSB
    • 1 x DDR2 SO-DIMM support up to 2.0 GB .
    • Intel® GME965 & ICH8M Chipset.
    • Intel® GME965 built-in GMA X3100 VGA , LVDS 
    • SATA . USB 2.0 , Intel® Giga LAN

    Product Name: FS-A71
    Company: Taiwan Commate Computer Inc.(COMMELL)

    Taiwan Commate Computer Inc. (COMMELL), the worldwide leader of Industrial SBC , introduced the PICMG 1.3 CPU Card that main board incorporates an Intel Socket P pin-out compatible with Intel Core 2 Duo Mobile Merom processors @ FSB 533/800MHz support for T7700, T7500, T7300, T7100 , Validated with the Mobile GME965 Express chipset, providing excellent flexibility for developers of embedded applications by offering outstanding graphics and I/O bandwidth, asset management capabilities, storage speed and reliability.

    Product Name: FS-A72
    Company: Taiwan Commate Computer Inc.(COMMELL)

    COMMELL's  FS-A72 single board computer has a built-in Intel Graphics Accelerator 4500 to deliver an excellent blend of graphics performance and features, Delivers integrated dual-display support and support for Microsoft DirectX 10 and OpenGL 2.0 enabling support for the highest levels of Windows Vista experience. The Graphic Memory Controller Hub incorporates an updated backbone architecture that optimizes available bandwidth with the 1333 MHz system bus.

    Product Name: FS-A73
    Company: Taiwan Commate Computer Inc.(COMMELL)

    Taiwan Commate Computer Inc.(COMMELL), is releasing  the  FS-A73 PICMG 1.3 full-size CPU card  that designed for the new Intel mobile Core i7/i5/i3 processors in the rPGA988A socket with a 1066/1333MHz FSB. The Single Board Computer (SBC) based on intel QM57 chipset, along with a compatible processor that is Intel next generation 64-bit, multi-core processors built on 32 nm Core i7/i5/i3 with HD Graphic function or 45nm i7-8x0 & i7-7x0 without Graphic, placing the memory controller and graphics core on the processor die provides a two-chip system architecture,  Innovative two-chip solution provides Intel Turbo boost technology and Intel Hyper-Threading technology which maximizes performance to match your workload and lower power than previous three-chip platform. This platform is ideal for developing high-performance systems for industrial control and automation, Digital Video Recorder, print imaging and Medical imaging equipment, broadcast systems and network security.

    Product Name: MSP430 Ultra-Low Power Microcontrollers
    Company: Texas Instruments Inc.

    From ultra-low-power MSP430 MCUs and 32-bit general purpose ARM7-based TMS470 MCUs to high performance TMS320C2000™ digital signal controllers, TI offers designers the broadest range of embedded control solutions.

    Product Name: austriamicrosystems (AMS) Processes
    Company: The MOSIS Service

    MOSIS is offering multiproject (see fabrication schedule and dedicated (COT) runs to the following austriamicrosystems processes. Dedicated runs can be scheduled to start at any time.

    Product Name: IBM SiGe & CMOS Processes
    Company: The MOSIS Service

    MOSIS has compiled the following chart comparing various features to help you better select which IBM process is most appropriate to your application.

    Product Name: ON Semiconductor Processes
    Company: The MOSIS Service

    MOSIS is offering multiproject (see fabrication schedule and dedicated (COT) runs to the following ON Semiconductor processes. Dedicated runs can be scheduled to start at any time.

    Product Name: TSMC Processes Available Through MOSIS
    Company: The MOSIS Service

    MOSIS has compiled the following chart comparing various features to help you better select which TSMC process is most appropriate to your applicaiton.

    Product Name: W65C02S 8-bit Microprocessor (MPU)
    Company: The Western Design Center, Inc.

    The W65C02S is a low power 8–bit microprocessor utilized in a vast array of products for the Automotive, Consumer, Industrial, and Medical markets. This chip features a full external data (8–bit) and address (16–bit) bus for easy integration with 8–bit peripherals and memory.

    Product Name: W65C816S 8/16–bit Microprocessor (MPU)
    Company: The Western Design Center, Inc.

    The W65C816S extends the 65xx technology family to handle 16–bit processing with a 16MB memory space while its emulation mode allows complete hardware and software compatibility with 64KB 6502 designs. The New Direct Register and stack relative addressing provides capability for re–entrant, re–cursive and re–locatable programming.

    Product Name: G9 Low Voltage
    Company: Toshiba, Inc.

    The G9 adjustable speed drive is the most advanced severe duty drive ever offered by Toshiba. It is a blend of a robust power platform and a state-of-the-art control scheme. With its 115% continuous overload rating and its dual 32-bit processor controls, the G9 provides the ability to operate the toughest of applications while still maintaining a high level of control.

    Product Name: GX7 Low Voltage
    Company: Toshiba, Inc.

    Toshiba’s GX7 Series PWM adjustable speed drive is a severe duty drive built to handle all conventional applications in the industry, ranging from the simplest to the most complex. The GX7 Series offers flux-vector technology with or without encoder feedback. This drive maintains astoundingly tight control over both torque and speed with the industry's most user-friendly operator interface. The GX7 is designed to handle the most extreme conditions, continuing the G-Series tradition of delivering a robust performance platform.

    Product Name: P9 Low Voltage
    Company: Toshiba, Inc.

    The Toshiba P9 low voltage adjustable speed drive is a revolution in pump control. By incorporating Toshiba’s proprietary, ground-breaking Virtual Linear Pump (VLP) Technology, the P9 directly, precisely, and linearly controls pressure, temperature, or flow. The P9 eliminates many obstacles users thought were an integral part of pump control and sets a new standard in ingenuity, performance, and ease-of-use for the pump industry.

    Product Name: TTEDevelopment System 100 Mbit/s
    Company: TTTech Computertechnik AG

    The TTEDevelopment System 100 Mbit/s supports 100Base-TX Ethernet and enables hard real-time communication using a software implementation of the TTEthernet protocol on the end system computer. The TTEDevelopment System offers all TTEthernet features and supports the development of distributed real-time applications at entry-level pricing. The software-based TTEthernet implementation of this development system uses regular Ethernet controllers and Intel Atom CPUs, showcasing that real-time Ethernet can be implemented on virtually any Ethernet-compliant hardware.

    Product Name: ProCANopen 6.2
    Company: Vector Cantech, Inc.

    CANopen is an open, CAN-based communication protocol. Its wide range of application includes the areas of transport and control technology, measurement systems, medical technology, railway technology, and much more – in short everywhere great flexibility and rapid data transmission are in demand.

    Product Name: VectorCAST/C++
    Company: Vector Software, Inc.

    VectorCAST/C++ is an integrated software test solution that significantly reduces the time, effort, and cost associated with testing C/C++ software components necessary for validating safety- and mission-critical embedded systems.

    Product Name: W65C02S 8–bit Microprocessor
    Company: Western Design Center, Inc.

    Features of the W65C02S
    • 8−bit data bus
    • 16−bit Address Bus 65Kbyte Memory and IO Space
    • 69 Variable Length Instructions
    • 16 Addressing Modes
    • 1.8−5V Operating Voltage
    • Fully Static for Power and Radiation Management
    • Verilog RTL Core Available for FPGA Development

    Product Name: W65C02S 8–bit Microprocessor
    Company: Western Design Center, Inc.

    WDC's microprocessor IP has been tailored for ease of reuse. The hard core IP is in the industry standard GDSII format.The buffer ring has been designed with off-chip drivers, including latch-up and ESD protection. When the core is embedded,the off-chip buffer ring is replaced with On-Chip-Bus (OCB) interface ring. The abstract cell is the connecting points with labels that provide core verification and system verification. WDC's test programs require that all test pins be compared to the standard test vendors.

    Product Name: W65C134S 8–bit Microcontroller
    Company: Western Design Center, Inc.

    Please note that due to unavailability of the 68 pin PLCC package type, WDC will no longer be offering the W65C134S in the 68 pin PLCC package. We do have a limited number of sample parts available in PLCC as well as a limited production stock of W65C134SQ qualification sample devices in the 80 Pin QFP package (W65C134SQ-6). After customer qualification, WDC will maintain W65C134SQG-8 production stock as scheduled for delivery to qualified customers.

    Product Name: embedded UML RXF
    Company: Willert Software Tools GmbH

    Willert Software Tools Embedded UML RXF® enables you to use UML in connection with code-generation for even the smallest of target platforms. The RXF speeds up the Rhapsody® genersted code by a factor of 10 and reduces the size of the Object Execution Frameworks by a factor of 3.

    Product Name: Embedded UML Studio II
    Company: Willert Software Tools GmbH

    Embedded UML Studio™ from Willert Software Tools is a highly integrated UML solution specially
    designed for the development of embedded real-time systems.

    Product Name: Embedded UML Target Debugger
    Company: Willert Software Tools GmbH

    Even software modeled in UML isn’t always free from errors. Therefore, debugging remains one of the key tasks in software development. In the context of so-called embedded systems, the hardware used is often proprietary, and some of the errors probably occur only when the software is executed on this hardware.

    Product Name: Run-Time Technologies
    Company: Wind River

    Throughout the device development cycle, engineers must spend valuable time integrating standard technologies. Although commercial acceptance dictates this inclusion, such technologies do not offer enough differentiating features to give devices an edge in the market

    ASIC and IC Design : Formal Verification

    Product Name: AFS Nano Block-Level SPICE
    Company: Berkeley Design Automation, Inc.

    AFS Nano™ is the industry’s fastest SPICE simulator for block-level IC design. Part of the AFS Platform, AFS Nano delivers foundry-certified nanometer SPICE accuracy, 5x-10x faster for blocks with up to 5K elements. A one-year time-based license costs only $1,900 US.

    Product Name: JasperGold Apps
    Company: Jasper Design Automation, Inc.

    JasperGold Apps are based on Jasper's JasperGold technology and are targeted solutions that address specific design and verification challenges. 

    Product Name: DiaLite Platform
    Company: TEMENTO Systems

    The Platform Edition includes all features of the Leading Edge Edition plus the Assertion Checker module. This IP allows the designer to embed his system assertions conditions written along with his system specifications before synthesis and check them at speed.

    Product Name: FRstress
    Company: Vector Cantech, Inc.

    For testing and validating FlexRay systems there is a need forgreater precision in studying a system’ s behavior in response toerrors and disturbances. FRstress generates reproducible disturbanceson a channel in the FlexRay cluster. It can generate protocolerrors as well as disturbances in bus physics that are activated by trigger conditions. This gives the developer and tester a highperformance stress module.

    FPGA and PLD Design Tools : FPGA Synthesis

    Product Name: CoDeSys V3 OPC-Server
    Company: 3S - Smart Software Solutions GmbH

    The CoDeSys OPC-Server is part of the standard delivery package of CoDeSys V3 and  is based on the 3S-Smart Software Solutions PLCHandler. It can be operated under Windows XP and supports the following OPC specifications.

    Product Name: H.264 CODEC FPGA Core
    Company: A2e Technologies

    The new H.264-15 core represents a huge leap in performance with jsut a small increase in size over our previous generation core. Encoding and decoding performance have been doubled with just a 30% increase in gate count.  A single H.264-15 core is capable of compressing or decompressing 1080p30 video in a Spartan 6 device. Additionally, we've added a more flexible bus interface that allows imultaneous and asynchronous access to reference frame memory, video input data, and compressed data (in or out). Support for the latest Xilinx deivces such as Zynq an dKintex and AXI bus has also been added.

    Product Name: H.264 ENCODER FPGA Core - Micro Footprint
    Company: A2e Technologies

    It is capable of being synthesized in Xilinx FPGAs and supports H.264 variable and fixed bit-rate encoding of video streams. Encodes video data at 1.5 clocks/pixel. Typical clock rate in an Xilinx SPARTAN 6 is 95Mhz. Typical clock rate in a Xilinx Zynq 7020 is 95MHz. Multiple cores can be used for processing larger size or higher frame rate images. Uses FPGA specific DDR 3 controller and microprocessor soft core.

    Product Name: JPEG FPGA Cores
    Company: A2e Technologies

    Our JPEG core is an 8-bit JPEG encoder for still image and video compression applications. This core is extremely high speed performance, capable of compressing 140MPixels/sec for 4-2-0 images in a Xilinx Spartan 6 FPGA.

    Product Name: GRSPW Spacewire
    Company: Aeroflex Gaisler AB

    The GRSPW core implements a Spacewire Codec with RMAP support and AMBA host interface. The core implements the Spacewire standard with the protocol identification extension (ECSS-E- 50-12 part 2) and RMAP protocol draft C. Receive and transmit data is autonomously transferred between the Spacewire Codec and the AMBA AHB bus using DMA transfers. Through the use of receive and transmit descriptors, multiple Spacewire packets can be received and transmitted without CPU involvement. The GRSPW control registers are accessed through an APB interface. For critical space applications, a fault-tolerant (FT) version of GRSPW is available with full SEU protection of all RAM blocks.

    Product Name: C-NIC
    Company: Aliathon Ltd

    Aliathon’s Compact, Configurable, Network Interface Card (C-NICTM) delivers incredibly flexible state-ofthe-art Technology to support a multitude of Network Applications. Its Programmable Hardware/Software and extremely compact footprint means a highly targeted cost-effective solution to many of your Network challenges. So, if you need the very latest Technology and the flexibility to move with the everchanging times, take the C-NICTM route.

    Product Name: 100G Network Processor
    Company: Allowtech

    AllowTech has combined its extensive FPGA and networking expertise to develop an implementation concept that dramatically simplifies the design and verification of an FPGA based network processors. This results in exceeding performance and reducing cost while enabling a faster time-to-market for your product.

    Product Name: Quartus II Web Edition (Free)
    Company: Altera Corporation

    A subset of Quartus II software that provides support for most device families
    View a comparison between Quartus II Web Edition software vs. Quartus II Subscription Edition software
    Getting Started
       - Download the free Quartus II Web Edition software now
       - Request a Quartus II Web Edition Software Suite CD-ROM

    Product Name: MAX+PLUS II to Quartus II
    Company: Altera Corporation

    The latest release of Quartus® II software is the easiest-to-use and best software for designing with CPLDs, FPGAs, and HardCopy® ASICs. MAX+PLUS® II software users will be amazed at how familiar the Quartus II software looks and feels while delivering better performance, more features, and access to exciting new CPLD and FPGA device families.  Watch a video demo below.

    Product Name: CoreFire FPGA Design Suite
    Company: Annapolis Micro Systems, Inc.

    The CoreFireTM FPGA Design Technology is unique in the industry, and is, to the best of our knowledge, superior to and completely unlike that of any other FPGA development tool available.

    Product Name: CoreFireTM Design Suite
    Company: Annapolis Micro Systems, Inc.

    CoreFireTM Design Suite includes Application Builder, Application Debugger, Core Module Libraries and Board Support Package Libraries. Currently runs on Windows NT and Windows 2000. The CoreFireTM Application Debugger will also run on Solaris, Digital Unix and Linux. Network License management by SentinelLM License Servers - runs on Windows NT/2000 and Linux.

    Product Name: FIREBIRDTM
    Company: Annapolis Micro Systems, Inc.

    FIREBIRDTM is part of the WILDSTARTM Product Family, continuing our tradition of supplying COTS Reconfigurable Computing Boards, based on the Xilinx VirtexTM E FPGAs, with a Balanced Architecture for Processing Speed: FPGA Processor Size and Speed, High Memory Bandwidth, and Flexible I/O Options. The FIREBIRDTM Architecture is also available in PMC format.

    Product Name: WILDSTAR 4 / 5
    Company: Annapolis Micro Systems, Inc.

    WILDSTARTM 4 / 5, our 10th Generation of FPGA Based Processing Boards, using Xilinx Virtex 4 and Virtex 5 FPGAs. Mezzanine Cards and On-Board I/O carry forward the Annapolis WILDSTARTM strategy of providing End to End Input, Processing and Storage, with superior COTS Analog to Digital, Digital to Analog and High Speed Communications Solutions.

    Product Name: WILDSTAR™ 6 VPX Card
    Company: Annapolis Micro Systems, Inc.

    All WILDSTARTM 4 / 5 / 6 boards are fully compatible with the CoreFireTM Design Suite, an FPGA design application  tool developed by Annapolis Micro Systems, Inc. The CoreFireTM Design Suite is a Graphical User Interface (GUI) tool using Data Flow Methodology which combines Annapolis’s extensive systems and application development experience with their large collection of tightly crafted high performance Intellectual Property (IP) Cores, the automatic generation of the logic necessary to control the interfaces between the modules, and Hardware in the Loop Debugging to provide an exceedingly convenient and fast  methodology for developing FPGA application files. With CoreFireTM it is possible to completely implement an algorithm on our WILDTM Family of Field Programmable Gate Array (FPGA) boards without ever descending to the lower level hardware details, saving months of development time and money.

    Product Name: MB-OFDM UWB PHY: Baseband Processor (BBP)
    Company: aRenarti- Semiconductor IP, Inc

    The baseband processor provides all functionality tosupport ECMA-368 including the following:
    • Tx/Rx service primitives
    • Clear Channel Assessment (CCA)
    • Received Signal Strength Indication (RSSI)
    • Link Quality Indication (LQI)
    • PLCP header with HCS generation
    • Power management support

    Product Name: FPGA
    Company: Baegan Technologies

    Our customers in this market are Embedded System Players and ASIC developers. Typical design implementations are Glue logic and Digital IP's. Functional verification is another area of application. Our solutions are either implemented in CPLD's or FPGA's or ASIC's. Typically, our customers request the best cost effective solutions.

    Product Name: MPEG-4 Decoder
    Company: Barco

    The MPEG-4 decoder is a hardware module optimized for FPGA technologies, making use of a limited number of logic resources and being able to decode a 4CIF (704x576) sequence in real time. The decoder can also be used to decode multiple streams simultaneously (up to 8).

    Product Name: MPEG-4 Encoder
    Company: Barco

    The MPEG-4 encoder is a hardware module optimized for FPGA technologies, making use of a limited number of logic resources and being able to encode a 4CIF (704x576) sequence in real time.

    Product Name: HIPPO
    Company: BitSim AB

    The HIPPO board is an evaluation board used to explore the high-speed data capabilities of the new Virtex-II Pro FPGAs from XILINX. With the built-in SERDES transceivers in this device it is possible to implement standard high-speed interfaces, running at serial data speeds up to 3.125Gbit/s. Standards that can be implemented include: XAUI (10GBE), RapidIO (serial and parallel), Infiniband, Fiber Channel, Gigabit Ethernet, PL-4, Serial ATA and Hypertransport.

    Product Name: Fpga , ATOM CPU, drivers and Windows Embedded integrated together
    Company: geb enterprise s.r.l.

    The GEB Enterprise Smart Customizable Equipment (SCE) is a product that was designed to host equipments  that requires high speed I/O, digital managements on a FPGA, presentations and communications via a standard PC in a small space.

    Product Name: PROC HILs™
    Company: GiDEL

    GiDEL PROC_HILs™ is a hardware acceleration tool that enables running Simulink designs on FPGA. Simulink enables building and simulating complex model-based designs using an interactive graphical environment. However, software simulations require plenty of PC resources and become slower as the designs become more complex. Therefore, a solution is required to speed-up Simulink simulations.

    Product Name: ProceV
    Company: GiDEL

    The ProceV™ system is based on Altera’s newest generation Stratix V FPGA device. The ProceV provides massive capacity (up to 952K LEs), and high memory and I/O performance. In addition to 8-Lane PCIe gen 3, twenty six 12.5/14.1 Gb/s transceivers provide external IOs of up to 366 Gb/s (full duplex). The combination of high-speed direct communication to the FPGA via PCIe, CXP, SFP+, and General Purpose high-speed transceivers makes the ProceV ideal for low-latency, high performance networking and HPC applications.

    Product Name: High Speed FPGA Turbo Decoder- S4000
    Company: iCODING Technology Incorporated

    The iCODING S4000 High Speed FPGA Turbo Decoder provides leading technology turbo code performance at exceptional data throughputs. Using the highly parallelizeable iCODING decoding core as a basis, the S4000 can achieve speeds in a single FPGA which were previously only possible in ASIC. Designed for both VirtexTM-E and VirtexTM –II Xilinx series of FPGAs, a wide range of speed/performance tradeoffs can be achieved, dependent on the selection of FPGA size and maximum block size.

    Product Name: Impulse CoDeveloper
    Company: Impulse Accelerated Technologies

    Impulse CoDeveloper is for software application developers and FPGA designers seeking a faster path to FPGA hardware. CoDeveloper is ideally suited to image and video processing, digital signal processing, data compression/encryption, and hardware-accelerated computing. The Impulse C compiler is a high-level synthesis tool that is based on standard ANSI C. The Impulse tools enable highly iterative, software-oriented design methods and are compatible with a wide variety of FPGA-based platforms.

    Product Name: Fast Access Controller
    Company: Intellitech Corp

    The FAC is a plug-and-play IP solution for processor (Micro-controller, DSP or CPU), FPGA Users and ASIC/SoC designers who need to respond to customer demands for better Design-for-Test and improved support for programming external FLASH in a production environment.  The Fast Access Controller is covered by US Patent #6,594,802 and Canada patent #2404059 "Method and Apparatus for optimized access to circuits for debug, programming and test". Asian and European patents are applied for and pending. Intellitech's patented technology delivers the world's fastest on-board FLASH and non-volatile memory programming. There is no need to perform stand-alone or in-line device programming in order to achieve the optimum programming speeds.

    Product Name: SystemBIST
    Company: Intellitech Corp

    SystemBIST is a complete plug-and-play IC for flexible FPGA configuration and embedded JTAG test built upon several unique patented architectures. SystemBIST is a code-less configuration device which enables design engineers to build high quality, self-testable and in-the-field re-configurable products. SystemBIST is vendor independent and can configure any IEEE 1532 or IEEE 1149.1 compliant FPGA.  System CPLDs, EEPROMs and FLASH can also be re-programmed in the field with SystemBIST through other members of Intellitech's TEST-IP family.

    Product Name: EM1N - Embedded System Module with MPC5200B
    Company: MEN Mikro Elektronik GmbH

    The EM1N can be supplied as a stand-alone module, with an application-specific carrier card and/or with additionally plugged PCI-104 modules...

    Product Name: ModelSim
    Company: Mentor Graphics

    ModelSim combines high performance and high capacity with the code coverage and debugging capabilities required to simulate larger blocks and systems and attain ASIC gate-level sign-off. Comprehensive support of Verilog, VHDL, and SystemC provide a solid foundation for single and multi-language design verification environments

    Product Name: VisualSim-- Xilinx FPGA Modeling Toolkit
    Company: Mirabilis Design Inc.

    VisualSim Xilinx FPGA Modeling Toolkit provides a virtual prototyping environment for performance analysis, architecture exploration and power optimization. This Modeling Toolkit works on the VisualSim Architect modeling and simulation environment. VisualSim Architect is a comprehensive environment for engineers to conduct performance, power and architecture exploration on the proposed system using a set of parameterized modeling components in a graphical block diagram editor.

    Product Name: AMC-420 - ATCA, MicroTCA AMC Module with FMC Site
    Company: Nallatech Inc

    The AMC-420™ FPGA processing module is designed to meet the processing needs of high-performance applications in the telecommunications & networking, video processing and defense markets. A Xilinx Virtex-6 FPGA enables high performance processing applications to be implemented with low levels of power consumption. Application specific I/O can be added to the AMC-420 via the on-board FMC site.

    Product Name: BenADDA-16 - Virtex-5, Dual 16-bit ADC & Dual 16-bit DAC
    Company: Nallatech Inc

    The DIME-II module combines a Xilinx Virtex-5 SXT or LXT FPGA with two Linear Technology 16-bit, 180 MSPS ADCs and a single Texas Instruments dual channel 16-bit 1GSPS DAC. Two independent banks of QDR-II SRAM directly coupled to the Xilinx Virtex-5 FPGA are capable of double buffering ADC data prior to processing.

    Product Name: PCIe-385N - Altera Stratix V FPGA Computing Card
    Company: Nallatech Inc

    Altera Stratix V Computing Card delivers a simple but powerful architecture ideally suited to real-time network processing and algorithm acceleration applications including network monitoring, filtering, analytics and data retention.

    Product Name: VXS-610 - Dual Virtex 5 FPGA and PowerPC - VXS Multiprocessor
    Company: Nallatech Inc

    Xilinx® Virtex™-5 FPGAs for high performance processing Onboard PowerPC CPU for standalone operation, communications management and user applications Two PMC/XMC sites for maximum I/O density and flexibility VxWorks and Linux operating system.

    Product Name: XMC-210 - Virtex 5 FPGA and Dual 8-bit 3GSPS A/D PMC/XMC
    Company: Nallatech Inc

    Dual-channel 8-bit 3GSPS analog to digital conversion for high-bandwidth capture Xilinx® Virtex™-5 FPGAs for high performance DSP algorithm implementation PMC/XMC format offers compatibility with most carriers and compute cards.

    Product Name: FPGA Hardware
    Company: National Instruments Corp.

    With reconfigurable field-programmable gate array (FPGA) technology, you can perform high-speed signal processing, I/O synchronization, and custom triggering. For control systems, you can also run advanced control algorithms directly in the FPGA fabric to minimize latency and maximize loop rates. Consult the resources below to help you choose from a variety of off-the-shelf NI FPGA hardware platforms that combine modular I/O, real-time processing, and NI LabVIEW programmable FPGAs.

    Product Name: 360 EC-FPGA
    Company: OneSpin Solutions GmbH

    The OneSpin® 360 EC-FPGA solution ensures that advanced FPGA synthesis optimizations – used to achieve competitive functionality, performance, power consumption, and cost targets – do not introduce functional errors. It supports all sequential synthesis optimizations performed in FPGA design flows.  360 EC-FPGA verifies the optimized design 'as is' without gate-level simulation, design modifications or design restrictions – such as disabling synthesis optimizations. It verifies the whole-chip flat netlists, enabling the most aggressive optimizations leading to highly competitive designs.

    Product Name: FPGA
    Company: Pentek Inc.

    Pentek's segment catalogs highlight products by function. These downloadable catalogs are available for Analog & Digital I/O, Clock & Synchronization Generators, Processors, Radar & Software Defined Radio (SDR) I/O, Software & Field Programmable Gate Array (FPGA) Tools and High-Speed Real-Time Recording Systems.

    Product Name: Dual Virtex-4 (TAI PDK)
    Company: S2C Inc.

    The Dual Virtex-4 TAI Prototyping Development Kit (TAI PDK) is an integrated FPGA-based prototype design suite that enables IC designers to easily construct efficient SoC prototypes in a cost-effective manner. The design kit is comprised of three flagship S2C products ¨C Dual Virtex-4 TAI Logic Module prototyping board, TAI Pod prototype-to-PC hardware interface, and TAI Player design flow automation software.

    Product Name: Softing CAN bus
    Company: Softing AG

    Our CAN bus Tools for development support and network analysis and configuration help device and system developers, component integrators and users carry out their tasks.

    Product Name: SystemCrafter SC
    Company: SystemCrafter Ltd

    SystemCrafter SC generates RTL VHDL or Verilog for downstream synthesis to Xilinx FPGAs, and closes the verification gap by writing a structural SystemC output for simulation.

    Product Name: DiaLite Leading Edge
    Company: TEMENTO Systems

    Designed to be independent from any PLD Platform, DLI™ tool fits easily with any standard FPGA design flow that uses a HDL synthesis tool.

    Product Name: FPGA Programming in C
    Company: TRIAS Mikroelektronik GmbH

    CoDeveloper brings the power of C programming to programmable hardware targets based on Field Programmable Gate Arrays (FPGAs). By using CoDeveloper and its optimizing Impulse C™ FPGA compiler, you have the power to accelerate C algorithms by 100x or more over equivalent embedded processor implementations.

    Product Name: ModelSim Designer
    Company: TRIAS Mikroelektronik GmbH

    ModelSim Designer is a Windows®-based design environment for FPGAs. It provides an easy to use, advanced-feature tool at an entry-level price. The complete process of creation, management, simulation, and implementation are controlled from a single user interface, facilitating the design and verification flow and providing significant productivity gains.

    Product Name: Precision Synthesis
    Company: TRIAS Mikroelektronik GmbH

    Industry-leading FPGA synthesis technology helps FPGA designers to start designs right, improve designs quickly, and meet requirements

    Product Name: VME/FPGA- System
    Company: X-SPEX GmbH

    Universal VME-System incorporating a powerful FPGA, various interfaces as well as two powerful expansion slots.

    Product Name: ISE Design Suite 10.1
    Company: XILINX

    The ISE™ Design Suite 10.1 delivers the perfect combination of design performance and productivity. Whether your design requires a flexible embedded processing solution, a specialized flow for DSP development, or just optimal high-performance logic, the ISE Design Suite 10.1 can help you quickly achieve your design goals.

    Product Name: virtex-6 FPGAs
    Company: XILINX

    The Virtex®-6 family provides the newest, most advanced features in the FPGA market. Virtex-6 FPGAs are the programmable silicon foundation for Targeted Design Platforms that deliver integrated software and hardware components to enable designers to focus on innovation as soon as their development cycle begins.

    Product Name: logiBITBLT
    Company: Xylon

    2D graphics accelerator that tremendously lowers a burden on the system's CPU and enables generation of attractive and effective computer graphics by the Xilinx® FPGA.

    ASIC and IC Design : HDL Add-In Tools

    Product Name: HDL Navigator
    Company: Adveda B.V.

    The HDL Navigator is a dedicated HDL browser, which uses both the source code and the compiled result. For each signal the
    origin(s) and destination(s) can easily be traced in the browser.
    It provides full visibility, including current values of parameters and uses different icons to indicate wires, flip-flops, blocking assign, ...

    Product Name: Univers RTSIM
    Company: Adveda B.V.

    Univers RTSIM is the stand-alone RTL Simulator. The RTL simulator is also part of Univers COVER. It is a blazingly fast digital simulator with a cycle-based kernel using 2-state logic models or 4-state logic models, resulting in simulations which are factors faster when compared with traditional simulators.  

    Product Name: Leon3 Processor
    Company: Aeroflex Gaisler AB

    The LEON3 is a synthesisable VHDL model of a 32-bit processor compliant with the SPARC V8 architecture. The model is highly configurable, and particularly suitable for system-on-a-chip (SOC) designs. The full source code is available under the GNU GPL license, allowing free and unlimited use for research and education

    Product Name: SOS™
    Company: Cliosoft, Inc.

    SOS is the leading data collaboration platform for hardware design teams. Its capabilities include multi-site collaboration, version control, workarea management, release management, and project control. SOS seamlessly streamlines your entire design process by enhancing communication and facilitating efficient and accurate sharing of design data from concept through tapeout. This significantly improves design team productivity and dramatically reduces chances of requiring a mask re-spin due to configuration errors.

    Product Name: convertLogic
    Company: Coastal Logic, Inc.

    Enable Regulatory Compliance and document transportability by converting files into secure, metadata stamped PDFs. No native applications needed.Developed over the course of more than 10 years, convertLogic has been battle tested in some of the world's biggest and busiest manufacturing companies. Coupled with Coastal Logic's unparalleled customer service, we strive to make convertLogic the most dependable part of your company's infrastructure.

    Product Name: GateVision®
    Company: Concept Engineering GmbH

    GateVision PRO is the third generation of graphical netlist analyzers from Concept Engineering. Completely rewritten to run on modern 32/64bit platforms, GateVision PRO provides the designer of even the largest chips with intuitive design navigation, schematic viewing, logic cone extraction and interactive logic cone viewing for debug support and design documentation.

    Product Name: Nlview™ Widget
    Company: Concept Engineering GmbH

    Nlview Widgets are a family of schematic generation and viewing software components (GUI building blocks) that can be easily used and customized within the most popular GUI development environments such as: Tcl/Tk, Java, MFC, Qt and Perl/TK.

    Product Name: RTLvision™ PRO
    Company: Concept Engineering GmbH

    RTLvision™ PRO provides fast visualization of RTL, so that an engineer can easily understand, and implement existing code elements, whether in VHDL, Verilog or System Verilog.

    Product Name: SGvision™ PRO
    Company: Concept Engineering GmbH

    SGvision™ PRO is a new tool to analyze mixed level descriptions, both top level structures described in Verilog and lower level structures described via SPICE, can be debugged in a single integrated environment.

    Product Name: Single Chip Dialer
    Company: Elan Microelectronics Corp.

    Dialer with Speech Net Work & Speaker Driver

    Product Name: Backplanes
    Company: Elma Electronic AG

    ELMA is the leader in high-performance ATCA backplane design. The backplane designs has been optimzed via signal integrity studies

    Product Name: DXL1500 Verilog® Netlist Translator
    Company: Engineering Dataxpress, Inc.

    The DXL1500 netlist translator is one of a series of optimized data links that is part of the DataXpress Integrator™ product line. The DataXpress Integrator ensures complete data interoperability between the various EDA vendors which are supported by the product line.

    Product Name: Translator Development Tools
    Company: Engineering Dataxpress, Inc.

    An environment or tool kit which provides all of the software components necessary for achieving data interoperability between EDA tools and data formats. The DXE environment fully supports electronic design data in the domains of Connectivity, Schematic Drawings, Symbols, Libraries and Structural HDL.

    Product Name: Fincov
    Company: Fintronic USA, Inc.

    Code coverage
    Language: Verilog
    Input Types: HDL, netlist
    Output Types: ASCII, HDL, SDF, VCD
    Data Displays: reports, Messages
    Operating Systems: SunOS, Solaris, HP-UX, Alpha OSF, Linux, Windows 98, Windows NT

    Product Name: FinVA
    Company: Fintronic USA, Inc.

    Verilog analyzer; offers error-checking capabilities
    Language: Verilog
    Input Types: HDL, netlist, SDF
    Output Types: ASCII, HDL, intermediate format (VIF)
    Data Displays: reports, Messages
    Operating Systems: SunOS, Solaris, HP-UX, Alpha OSF, Linux, Windows 98, Windows NT

    Product Name: FinVFI
    Company: Fintronic USA, Inc.

    Package of access functions; allows users to extract & modify information for Verilog design
    Language: Verilog
    Input Types: Intermediate format generated by FinVA
    Output Types: HSCII, HDL
    Data Displays: Messages, reports
    Operating Systems: SunOS, Solaris, HP-UX, Alpha OSF, Linux, Windows 98, Windows NT

    Product Name: MyVHDL Station V5.1
    Company: MyCAD, Inc.

    MyVHDL Station V5.1 is a VHDL simulator providing the integrated working environment to develop the VHDL design. In this workspace you can create, edit, compile, simulate and debug. MyVHDL Station has many features to enhance your development of VHDL design.

    Product Name: Serializer/Deserializer (SerDes)
    Company: National Semiconductor

    National Semiconductor offers the industry's most complete Serializer and Deserializer (SerDes) portfolio to serve broad market, wired and wireless communication (base station, CPRI) systems, automotive (AEC-Q100 qualified), broadcast video (SMPTE 3G, HD, SD-SDI), industrial automation (Camera Link), printers, and medical imaging applications.

    Product Name: OpenEDA Toolkit 1.0
    Company: ReyesSoft

    The ReyesSoft OpenEDA Toolkit 1.0 includes software packages like Alliance CAD, Icarus Verilog, The gEDA Suite, FreeHDL, Electric, GTKwave, PCB, Gerbv,Gnucap, NgSpice.

    Product Name: Sigasi Studio
    Company: Sigasi

    Sigasi Studio dramatically improves the FPGA and ASIC designer’s productivity by providing support to write, inspect and modify digital circuit designs intuitively. As you type, Sigasi Studio marks syntax errors so they can be immediately fixed. By understanding the HDL languages Sigasi Studio can support advanced features such as intelligent auto-completes and code refactoring, making Verilog, VHDL and SystemVerilog design entry easier and more efficient.   Sigasi Studio differs from other development tools in that it contains an ultra-fast VHDL parser and compiler that runs transparently in the background. At any given moment as you make modifications, the tool fully understands the design in terms of VHDL concepts.

    Product Name: WebCAD™
    Company: SunMan Engineering, Inc.

    WebCAD™ is an online application that lets you communicate effectively and accurately with the SunMan Engineering engineers so that you can save days in your time to market for your prototypes.

    Product Name: DiaLite Power Edge
    Company: TEMENTO Systems

    The Power Edge Edition includes all features of the Leading Edge Edition plus the HDL Fault Finder module. The HDL Fault Finder allows the designer to insert Watchpoints and Breakpoints into the HDL code and run concurrently to the instrumentation. The HDL Fault Finder provides an accurate monitoring and display of logic events occurring during the debug process. The insertion of watchpoints in your HDL code allows you to trace all events and quickly focus on the faulty lines.

    Product Name: WAVES
    Company: TOOL Corp.

    CAD tool to graphically input and edit digital waveforms for commercial logical simulators such as Verilog-HDL base logical simulator.

    Product Name: Verilog Test Suites
    Company: Verific Design Automation Inc.

    Verific Design Automation's Verilog Test Suites cover syntax and semantics of Verilog 2001, Verilog-AMS, and SystemVerilog. Other than conventional LRM tests, Verific's tests concentrate on the synthesizable subset of Verilog, thus providing superior coverage for EDA products.

    Product Name: GTsmooth®
    Company: XYALIS

    GTsmooth is a model-based dummy fill solution, which uses topology simulation algorithms to determine the least amount of dummy fill necessary to achieve optimal wafer planarization while minimizing parasitic effects.

    Product Name: Schematic Editor
    Company: Zeni EDA

    Zeni Schematic Editor (ZeniSE) is a powerful schematic editing tool that supports hierarchical design, multi-window and multi-page editing. It supports import/export of industry standard netlist formats, as well as schematic data in EDIF format, thus allowing seamless interchange of schematics between other EDA tools. With many other useful features, ZeniSE offers a complete circuit design environment to finish sophisticated designs quickly and easily

    HDL Analysis

    Product Name: ProfiTrace2
    Company: profichip GmbH

    ProfiTrace 2 is the most powerful analyzer for PROFIBUS networks. It is the latest generation in the line of busmonitor technology because it combines all primary tools to one

    Product Name: SiI9261 Input Processor
    Company: Silicon Image

    The SiI9261 input processor gives manufacturers the flexibility to add new features to their A/V receiver platforms quickly and cost-effectively. In addition to managing all the input interfaces, input processors offer innovations in legacy analog video inputs with high-quality 12-bit state-of-the-art ADCs and AVI interfaces and InstaPort™ technology for faster port switching.

    Product Name: CMTJava
    Company: Verifysoft Technology GmbH

    CMTJava Complexity Measures Tool is a tool for analysing the static complexity of software written in Java. The code complexity is known to correlate with the defect rate and robustness of the application program. Complex code is difficult to test: probably more errors remain unrevealed in the final program

    Product Name: X-HDL
    Company: X-TEK Corporation

    X-HDL 4 is the premier Verilog <=> VHDL bi-directional translator. X-HDL performs translation of even the most complex RTL/gate-level code efficiently and requiring few, if any, "hand tweaks" of the translated code.

    System Level Design (ESL) : HW/SW Co-Debug

    Product Name: SL2 (System Level Specification Language)
    Company: Adveda B.V.

    SL2 (System Level Specification Language) is an abstract descriptive language, developed to generate fast cycle true simulation models of processor cores and peripherals, suitable for multi-core firmware development environments. As the potential of the language is more versatile, it is extending to a complete SoC modelling and specification language.

    Product Name: Carbon Model Studio
    Company: Carbon Design Systems

    In a modern System on Chip, as much as 80% of the design is existing Intellectual Property (IP), either re-used from previous projects or provided by a third party. Carbon Model Studio enables the user to leverage this IP, in all of its configurations, to jump start the creation of complete, and accurate virtual prototype.

    Product Name: SoC Designer Plus
    Company: Carbon Design Systems

    SoC Designer Plus makes virtual prototype creation easy. SoC Designer Plus' easy-to-use GUI allows users to rapidly assemble models to create a virtual prototype.

    Product Name: HCS12 T-Board
    Company: Elektronikladen

    Freescale's amazing HCS12 Controller Family is an upgrade from the existing 16-bit product line HC12. Compared to the HC12, the new types are faster and more flexible, while the programming model and the instruction set remain the same.

    Product Name: S12X T-Board
    Company: Elektronikladen

    S12X is the name of the latest top-branch of Freescale's 16-bit microcontroller family. Derived from the current HCS12-line (which will be continued and offered in parallel by Freescale), the S12X delivers additional performance for demanding applications, e.g. for the automotive area.

    Product Name: AMC load
    Company: GateWare Communications GmbH

    AMC load-module for testing the cooling management and the power supply of ATCA and µTCA controlled systems.

    Product Name: TimeMachine Suite
    Company: Green Hills Software, Inc.

    Imagine running backward to the origin of a difficult bug. TimeMachine enables you to debug both forward and backward in time, making it easier to solve even the hardest bugs.

    Product Name: Silicon Debug for ICs and SoCs
    Company: Intellitech Corp

    The NEBULA Silicon Debugger is Intellitech's second generation DFT validation and silicon debug platform. NEBULA provides advanced features for performing early validation of DFT infrastructure and ATPG patterns in first silicon.  The NEBULA solution directly imports test pattern formats and DFT information from leading EDA vendor tools, such as Synopsys' TetraMAX and Cadence's Encounter Test.

    Product Name: JEDA Validation Tools Suite
    Company: JEDA Technologies

    • C/C++/SystemC Code Coverage and Analysis
    • C/C++/SystemC Functional Coverage and Analysis
    • Temporal Assertion Checker and Analysis
    • Intelligent Traffic Generator

    Product Name: WinDriver™
    Company: Jungo Ltd

    WinDriver™ product line supports any USB/PCI device, regardless of its silicon vendor, and enables you to focus on your driver's added-value functionality, instead of on the operating system internals

    Product Name: ME-FoXX ME-46xx
    Company: Meilhaus Electronic GmbH

    This DAQ board series for professional applications offers a high level of flexibility. You will be surprised about the versatile functions the board offers. Starting with lowcost allround starter models up to highend versions with complete opto-isolation and lots of extra features - you will find the right board for nearly every standard DAQ application!

    Product Name: OMAP35x EVM
    Company: Mistral Software Inc

    The OMAP35x EVM is an ideal software development and device prototyping platform for users wishing to get started on their wireless / multimedia based application and device development. It helps product developers, building their next generation wireless devices around the OMAP 3 processor, enjoy the benefits of faster user interfaces, faster data access and multi-standard encode/decode at D1 (720x480 pixels) resolution and 30 fps.

    Product Name: OLinuXino
    Company: OLIMEX Ltd.

    OLINUXINO is completely open source - including hardware and software, which means you have access to all the CAD files and sources and you can reuse them for your own personal or commercial projects. There are NO restrictions to manufacturing and selling these boards for your own use or resale.

    Product Name: Monitorkit
    Company: pls Programmierbare Logik & Systeme GmbH

    The Monitor Development Kit UDE-Mon provides a portable monitor development solution for the Universal Debug Engine (UDE) and the fast-view66/win that allows creating application hardware specific monitors for C16x, XC16x, ST10 and TriCore based target systems. Beside the ASC0 and CAN, a number of additional serial interfaces are supported to achieve maximum flexibility in adapting the microcontroller hardware.

    Product Name: Wireless Temperature Sensor - Sensor Tag, model STA-434-01
    Company: Pultronics Inc.

    STA-434-01 temperature sensor, part of Pultronics Wireless Temperature Monitoring System, provides highly accurate, real-time sensor-todatabase data collection without human intervention in multiple wireless applications

    Product Name: Rule Analyzer
    Company: Simutest Inc.

    Rule Analyzer is a test vector analysis product that can be used to analyze simulation or ATPG generated test vectors against a set of user defined rules. The Rule Analyzer product can be used in either design or test environment to identify compatibility of design test vectors against a particular test methodology or target ATE capabilities and restrictions. Additionally, the Rule Analyzer may also be used to detect the compliance of test vectors against the device datasheet timing specifications.

    Product Name: Verifier
    Company: Simutest Inc.

    The Verifier vector translator is a comprehensive and full featured automatic test program development tool. It continues to be the latest in the test automation technology and efficiently meets the challenges associated with converting simulation / ATPG test vectors into various tester formats. The Verifier addresses both time to market as well as improved design to manufacturing productivity.

    Product Name: Safety CANopen
    Company: SYS TEC electronic GmbH

    SYS TEC the complete range of hardware and software developments are done according to the well-proven V-model. The source code for software must be written in a structured and transparent fashion

    Product Name: CANscope
    Company: Vector Cantech, Inc.

    CANscope is the measuring device for recording and evaluating the voltage levels on the CAN bus. CANscope offers a robust recording module and an easy-to-use evaluation software program.  The recording  module is connected to the PC via an RS232 or USB interface.
     

    Product Name: JTAG Debugging
    Company: Wind River

    There is only one certainty in embedded development: Bugs will appear. And when complex bugs appear late in the development cycle, they can derail entire projects. With JTAG debugging tools from Wind River, you can be confident that bugs will be found and fixed before project milestones and deadlines are threatened.

    System Level Design (ESL) : HW/SW Co-Design

    Product Name: CODESYS PLCHandler: API / Software Interface (SDK) to the PLC data
    Company: 3S - Smart Software Solutions GmbH

    CODESYS PLCHandler: Compact software interface (API) for easy access to the PLC variables in CODESYS controllers from external systems.

    Product Name: CODESYS Service Tool – Maintenance your IEC 61131-3 application
    Company: 3S - Smart Software Solutions GmbH

    The CODESYS Service Tool has been especially designed for service technicians or plant operators for uploading updated controller applications, starting or stopping the PLC for maintenance purposes, device status requests or the like.  

    Product Name: PXI-3488
    Company: ADLINK TECHNOLOGY INC.

    ADLINK PXI-3488 GPIB controller interface card, fully compatible with the IEEE 488 instrumentation control and communication standard, is capable of controlling up to 14 stand-alone instruments via IEEE 488 cables. It is designed to meet the requirements for high performance and maximum programming portability

    Product Name: PXI-3800
    Company: ADLINK TECHNOLOGY INC.

    ADLINK PXI-3800 is the state-of-the-art 3U PXI controller of the ADLINK PXI product line. This product is designed to meet the highest performance requirements for embedded computing

    Product Name: Altia Design
    Company: Altia, Inc.

    Altia Design is the centerpiece of Altia's tool-chain. If you need a detailed, functionally complete, fully integrated user interface that can be simulated and turned into deployable code, then Altia Design is for you.

    Product Name: DeepScreen
    Company: Altia, Inc.

    Altia DeepScreen is a graphics code generator that converts your prototype graphics into deployable graphics code. Altia DeepScreen uses the same Altia design that has been a part of the project from the very beginning. To generate code, you simply select the design objects that represent the display portion of your product and click on the "Generate Code" menu. ANSI C or Java code is generated in seconds rather than months.

    Product Name: PhotoProto
    Company: Altia, Inc.

    You’re a talented graphics artist. Photoshop trembles at your touch. Take your art to the next level by turning static graphics into interactive prototypes with a few mouse clicks. That’s what PhotoProto does. It walks through your Photoshop file, exports all those carefully crafted images and references them in a file that the PhotoProto player displays. But this goes way beyond graphics. You simply name and arrange your layers and PhotoProto automatically assigns the appropriate behavior.

    Product Name: Tachyon 2.5
    Company: Brion Technologies

    Tachyon 2.5 builds upon the pioneering technology of Brion’s Tachyon, the industry’s first high-performance, image-based, dense-simulation computational lithography platform.

    Product Name: FlexRay™ Monitoring--Kit
    Company: CRST GmbH

    The CRST FlexRay™ Monitoring-Kit is a comprehensive "ready to run" hardware/ software solution for all users who want to get familar with the new FlexRay Technology.

    Product Name: PSTN, Mini-M and E1 Link Encryptor
    Company: D Crypt Private Limited

    The D’Cryptor  PE is also integrated into other D’Crypt products such as the PSTN and mini-M phone encryptor as well as the E1 Link Encryptor.
    D’Crypt’s E1 Link Encryptor provides end-to-end protection on a 2.048 Mbit/s data link. The encryptor intercepts data in a protocol-independent manner and does not introduce any overheads due to synchronization. The encryptor also has the ability to check and detect the data link for integrity and quality. It re-synchronizes in the face of channel errors or erasures.

    Product Name: TelePort
    Company: D Crypt Private Limited

    TelePort is a pure hardware solution for seamless secure remote access to your corporate intranet. This means no more messy software set-ups and maintenance, and minimal or no change to your network infrastructure.

    Product Name: Tiger Shark
    Company: D Crypt Private Limited

    TigerShark is a card neutral reader that consists of a FIPS 140-2 Level 3 certified cryptographic core (Certificate No. 637) and integrates interfaces to contactless Type A, B and C cards. The reader is designed to connect easily to existing POS terminals for secure contactless payment or mercgant loyalty programs. TigerShark employs advance cryptographic algorithms including DES, 3DES and AES to provide high data security assurance.

    Product Name: LVCS12
    Company: Elektronikladen

    LVCS12 is an easy applicable, credit card-sized Controller Module, based on the 16-bit microcontroller family HCS12 by Motorola. The LVCS12 module provides an easy way to evaluate the microcontroller. It is a versatile tool for rapid prototyping and a very cost-effective, off-the-shelf solution for low- and mid-volume series applications.

    Product Name: eXpecco
    Company: eXept Software AG

    Software programming - focuses on the controlflow of the computation by connecting and controlling procedural blocks. It takes a specialist to model the interactions, data paths, organise parallel progressions, etc. The greater the number of interdependencies and iterations of the development, the greater the difficulties, when test procedures are designed that way.

    Product Name: XASS-V Series
    Company: Gaio Technology, Inc.

    GAIO offers a comprehensive range of self-developed cross development tools including: IDE, C/C++ compiler, assembler, linker, debugger and MPU simulator.

    Product Name: Starter kits
    Company: IAR Systems AG

    IAR Systems provides completely integrated kits for development of embedded applications based on ARM, 8051, ColdFire, R8C/M16C/M32C and AVR32.

    Product Name: chronSim
    Company: INCHRON GmbH

    chronSim is the central INCHRON tool for design, visualization, quality testing and analysis of embedded systems. chronSim allows your engineers to perform the most powerful real-time simulation, analysis and in-depth forecast of your embedded software?s dynamic performance.

    Product Name: SimDE™ WAVEFORM V4.2 Release 201309
    Company: IO Methodology Inc.

    Signal Integrity and design engineers deal with Waveforms and Signals every day. An effective and powerful waveform and signal post-processing tool is important for increasing working efficiency and capability for your next high-speed system design.

    Product Name: LPKF CircuitCAM 6.1
    Company: LPKF Laser & Electronics, North America

    LPKF's CircuitCAM 6 offers powerful editing options for data modification, as well as the ability to import practically every major file type. Modify designs on-the-fly to take advantage of the special abilities of LPKF ProtoMat circuit board plotters.

    Product Name: ME-1000
    Company: Meilhaus Electronic GmbH

    • ME-1000/64: 64 TTL digital I/O channels (2x 32 bit ports).
    • ME-1000/128: 128 TTL digital I/O channels (4x 32 bit ports).
    • Each port programmable as input/output. Port configured as output with readback function.

    Product Name: ME-1600
    Company: Meilhaus Electronic GmbH

    12 bit output board with current/voltage channels ME-1600
  • 12 bit D/A conversion.
  • 4, 8, 12 or 16 voltage outputs or 16 voltage outputs, 8 of them also working as current outputs.
  • Product Name: ME-6x00
    Company: Meilhaus Electronic GmbH

    • 4, 8, PCI also 16 voltage outputs. Range ±10 V (max. ±15 mA per channel). ME-6200 and ME-6300: 1 additional channel 0…50 V.
    • All channels opto-isolated, available as:
    • ..."p"/"island" channels: Full opto-isolation with no common ground. All individual channels opto-isolated from the PC and from each other.

    Product Name: ME-8200 and MEphisto Opto
    Company: Meilhaus Electronic GmbH

    • A total of 48 digital channels: Opto and TTL I/O.
    • High-drive for levels up to 50 V. Load 700 mA.
    • 2 USB versions: MEphisto Opto or combination with ME-Synapse.

    Product Name: ME-Jekyll ME-4610
    Company: Meilhaus Electronic GmbH

    • 16 single-ended analog inputs. Range ±10 V.
    • High-precision 16 bit/500 kHz A/D conversion. External digital trigger.
    • 32 TTL digital I/O channels, grouped in 4x 8 bit ports. Each port programmable as input/output.

    Product Name: VisualSim Processor and Peripheral Modeling Toolkit
    Company: Mirabilis Design Inc.

    VisualSim Processor and Peripheral Modeling Toolkit enables users to create processor models for performance anlysis and architecture exploration. Current generation Instruction Set Simulators offer very little visibility into the processor internals- a huge requirements for both Processor Architects and software designers.

    Product Name: Craneboard
    Company: Mistral Software Inc

    Craneboard, from Mistral, is a hardware development platform that enables customers to develop general purpose computing and other applications based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. Craneboard is a low cost, open source reference platform to help the developer community leverage the benefits of the AM3517 processor while leveraging a host of exciting peripherals.

    Product Name: SatLab
    Company: MLDesign Technologies, Inc.

    SatLab is a software laboratory for mission and system level design, animation, and analysis of wireless mobile communication and navigation systems. SatLab models the dynamics of communication nodes (orbits of satellites, trajectories of cars, ships and aircraft) and the environment (terrain, propagation effects, blocking, coverage).

    Product Name: SFI - Simulator / Framework, Interface
    Company: MunEDA-ChipMD

    The setup of WiCkeD´s simulation environment is supported by specific integration software for design capture systems (aka frameworks) which provide the user with a graphical setup depending on the design capture system, simulators and libraries.

    Product Name: UDE MemTool
    Company: pls Programmierbare Logik & Systeme GmbH

    UDE MemTool is designed for On-Chip FLASH programming and On-Board FLASH / OTP programming with microcontroller hardware systems using SAB C16x, C166CBC, C166S-V2, XC16x, ST10F275, ST10F276, TriCore, ARM7, ARM9 derivatives.

    Product Name: Bluetooth Application Kit
    Company: Rabbit Semiconductor (acquired by Digi)

    Rabbit-based applications now have even more ways to communicate. Rabbit Semiconductor has added Bluetooth® support for selected core modules, the BL2500 and the BL2600 single board computers.

    Product Name: Serial-to-Ethernet Application Kit
    Company: Rabbit Semiconductor (acquired by Digi)

    Ethernet designers now have a Serial-to-Ethernet Application Kit that is easy to use out of the box. The simple 3-Step Setup for transmitting data from a digital volt meter via a serial port to a TCP/IP stream enables even the newest user to quickly develop a Serial-to-Ethernet application.

    Product Name: HyperPlot
    Company: Shearwater, Inc.

    HyperPlot is the world standard for complex plotting of integrated circuit designs. HyperPlot includes a wide variety of input formats and output drivers for direct printing of Cadence DF-II database, Oasis, GDSII, Mebes, PostScript, JPEG and other file formats.

    Product Name: HyperXpress
    Company: Shearwater, Inc.

    HyperXpress is a high performance software raster image processor (RIP) designed to enhance your productivity by dramatically decreasing the time it takes to print large, complex raster and vector images. HyperXpress is seamlessly integrated into your design environment to enable fast, high quality printing to any desktop or wide format output device.

    Product Name: CoDesign Studio
    Company: SIGRITY, Inc.

    CoDesign StudioTM, part of Sigrity's highly acclaimed set of power and signal integrity solutions, is a comprehensive chip and package co-design environment for analyzing and optimizing the performance of the entire power delivery system. It simultaneously co-simulates the complete package and the complete chip, in an integrated design environment, considering the critical package effects that impact the correct operation of the chip.

    Product Name: Platform IP for ARM Cortex-M0 Processor Based Systems
    Company: SoC Solutions

    The PIP-M0 provides the essential IP cores and infrastructure software needed for systems usin the g ARM® Cortex™-M0 microprocessor. Ready for software development out of the box but also easy to customize and extend, it serves as a basic platform for the rapid development of a variety of system-on-chip (SOC) applications.

    Product Name: USB 2.0 PHY IP Cores
    Company: Soft Mixed Signal Corporation

    · Fully compliant with latest USB 2.0 specification. · Fully Integrated HOST / DEVICE / OTG ( On-The-Go ) Transceiver when all optional features are included. · Innovative technique for clock recovery from 480 Mbps data. · High frequency PLL · Advanced high-speed transmitter and receiver. · Support High-Speed HS and Full-Speed FS modes (Also Low Speed LS with OHCI Interface in Host Mode) · Implements UTMI and/or UTMI+ with optional features, both 8 bit and 16 bit Bi-Directional or Uni-Directional Data Bus.

    Product Name: D/AVE 2D
    Company: TES Electronic System Solutions Ltd.

    D/AVE  is a Hardware IP Core, optimized for easy integration into FPGAs and ASICs. Focus of D/AVE 2D is to provide a high quality vector graphics with subpixel processing and an extended antialiasing functionality.

    Product Name: D/AVE 3D
    Company: TES Electronic System Solutions Ltd.

    D/AVE 3D is an IP core for 3D graphics applications. This core is available in 2 versions FPGA and for ASIC. This IP has been specifically designed for embedded, automotive and infotainment market with a big emphasis on flexibility both in hardware and the software. Accompanying the core would be an OpenGL-ES 1.1, EGL 1.3 and OpenVG 1.0 1 API.

    Product Name: Real-Time Workshop7.4
    Company: The MathWorks, Inc.

    The Real-Time Workshop® product generates and executes stand-alone C code for developing and testing algorithms modeled in Simulink® and Embedded MATLAB™ code. The resulting code can be used for many real-time and non-real-time applications, including simulation acceleration, rapid prototyping, and hardware-in-the-loop testing

    Product Name: Terbium Integrated Development Environment (TIDE) User Guide
    Company: The Western Design Center, Inc.

    The Terbium Integrated Development Environment (TIDE) integrates the WDC 65xx tool suite to maximize and ease your use of our tools and is included with our ProSDK. TIDE will help you get started and in no time at all you will be writing, compiling, and debugging your 65xx code!

    Product Name: TTP-Tools
    Company: TTTech Computertechnik AG

    TTP-Tools – now available in the 7th generation – are a unique development environment for fault-tolerant real-time systems in the embedded area. These tools allow a rapid and systematic development, which guarantees a seamless integration in the existing process. The consistent TTP-Tools cover the complete development process, ranging from rapid model-based prototyping to serial code generation. The resulting application can be loaded into the control units and can be put to distributed testing.

    Product Name: ODB++
    Company: Valor Computerized Systems, Ltd.(acquired by Mentor Graphics)

    ODB++ is the most intelligent CAD/CAM data exchange format available today, capturing all CAD/EDA, assembly and PCB fabrication knowledge in one single, unified database. Originally developed by Valor Computerized Systems for use in its own PCB CAD/CAM systems, Genesis 2000, Enterprise 3000 and Trilogy , ODB++ has already become widely accepted as the de facto industry standard, providing unprecedented power to PCB design, fabrication and assembly, with the flexibility to expand as required.

    Product Name: XJAPI
    Company: XJTAG

    The XJAPI gives you low-level access to the JTAG chain via either the XJLink or the PXI hardware, allowing easy integration with a wide range of other systems such as development/evaluation boards, test systems...

    System Level Design (ESL) : HW/SW Co-Verfication

    Product Name: CODESYS Control RTE: Real-time SoftPLC under Windows
    Company: 3S - Smart Software Solutions GmbH

    CODESYS Control RTE: Real-time SoftPLC for PC-based industrial controllers (PLCs) under Windows, programmable with the IEC 61131-3 Development System CODESYS.

    Product Name: Univers COVER
    Company: Adveda B.V.

    Univers COVER is the development tool for creating and verifying systems which include one or more CPU's and HDL designs.

    Product Name: Smart Reader
    Company: D Crypt Private Limited

    These are stand-alone readers built on the d’Cryptor QE core. Designed to meet FIPS 140-2 Level 2 requirements, these stand-alone readers are targeted for micro-payment applications using contactless smart cards.

    Product Name: Test and Experiment Software
    Company: dSPACE GmbH

    ControlDesk is a comprehensive, virtual instrument-oriented experiment environment that lets you intuitively manage, control and automate your experiments.

    Product Name: Coverage Master - winAMS
    Company: Gaio Technology, Inc.

    'Coverage Master - winAMS' is a package software tool for function module testing and path coverage testing to assure the embedded software reliability. This system uses GAIO's instruction set simulator 'System-G' and it can perform precise testing for target mpu. You can use the actual MPU object code compiled by your own cross compiler for module testing.

    Product Name: No.1 System Simulator
    Company: Gaio Technology, Inc.

    No.1 System Simulator is GAIO's latest simulation development environment for embedded systems. The new application "System Component Synthesizer" can automatically generate virtual simulation environment, which is configured as various type of MPU models and the other virtual HW, by simply configuring the system with component libraries. And it supports co-verification system connecting GAIO's ISS and MATLAB/Simulink of MathWorks. It can be used to improve the embedded software reliability by verifying the system at upstream development.

    Product Name: ProtoBuilder
    Company: Gaio Technology, Inc.

    'ProtoBuilder' is an HMI prototyping tool which can create virtual product model to verify the HMI specification before actual software development. It can be used to facilitate the communication between HMI designers and embedded software developers and it results smooth development processes without reattempts. It supports the usability verification tool 'GAP FINDER' made by NOVAS Inc.

    Product Name: GW440 PGX
    Company: GateWare Communications GmbH

    The PCI-X card with double Gigabit Ethernet Interface and FPGA accelorator technology for maximum data throughput.

    Product Name: uTCA MCH Base
    Company: GateWare Communications GmbH

    µTCA Carrier Hub Basis Board according to µTCA specification V1.0. Extension by switch and clock boards.

    Product Name: chronEst
    Company: INCHRON GmbH

    chronEst predicts - in combination with chronSim - the execution time of the C code of your embedded software, taking into account your hardware architecture, operating system and compiler. chronEst automatically breaks down your embedded software into its basic components and predicts the processor-related execution times based on a virtual prototype, resulting in carefully examined execution times.

    Product Name: CAMeL-View
    Company: iXtronics GmbH

    CAMel-View, based on industrial standards, close the gap between conventional mechanical design and real-time simulation. It offers genuine object-oriented modelling optimized for the design of mechatronic systems.

    Product Name: OCPchecker
    Company: JEDA Technologies

    • OCP Protocol Compliance Checker
    • Intelligent Traffic Generation for OCP
    • OCP Transaction Coverage and Analysis

    Product Name: Code Review
    Company: LDRA

    LDRA automatically applies a comprehensive set of programming standards to a single source file or a complete system. Customer-defined as well as industry standard coding rules are documented and applied to source code with the relevant violations and warnings identified. The ability to hyperlink to the associated lines of source code provides additional clarification and maximum productivity.

    Product Name: TBreq
    Company: LDRA

    TBreq, through its integration with the LDRA tool suite which includes LDRA Testbed and TBrun (unit testing component), is a unique solution that can help your team overcome the challenges of mapping test specifications, unit test scenarios, test data and code coverage verification with your high level and design requirements.

    Product Name: Testbed
    Company: LDRA

    LDRA Testbed is a unique quality control tool that provides powerful source code testing and analysis facilities for the validation and verification of software applications. It is invaluable where computer software is required to be reliable, rugged and as error free as possible and its use brings substantial time, cost and efficiency savings.

    Product Name: USB Analyzers
    Company: LeCroy Corporation

    LeCroy has over six generations of USB development tools and offers a wide selection of analyzers with varying capabilities and features. LeCroy provides comprehensive solutions that meet the unique demands of today's developers.

    Product Name: Seamless
    Company: Mentor Graphics

    Seamless enables users to debug hardware/software integration issues early in the design cycle by running embedded software on a simulation model of the embedded hardware. Seamless delivers full debug control and clear visibility of the interaction of hardware and software in your processor-based embedded design. Seamless provides an ideal platform for identifying critical HW/SW integration issues prior to the availability of an FPGA or silicon prototype.

    Product Name: UAD2+
    Company: pls Programmierbare Logik & Systeme GmbH

    The access to the whole choice of C16x, XC16x, C166CBC, C166S V2, TriCore, ST30, STR7, ARM7, ARM9 and XScale derivatives is supported with the Universal Access Device 2+, the new all-in-one add-on interface hardware for Universal Debug Engine.

    Product Name: UAD2compact
    Company: pls Programmierbare Logik & Systeme GmbH

    Universal Access Device 2compact is a new member of the UDE Access Device family and offers a high-end solution at a starter price. With a powerful 32-bit communication unit, pls presents a rapid communication tool to access ARM7, ARM9 and XC16x microcontrollers.

    Product Name: QA·J
    Company: Programming Research, Inc.

    Today's increasing number of business-critical applications and e-business initiatives means software quality has a direct impact on the bottom line of every organization. When software applications fail, businesses cannot function properly. It only takes a few lines of code to make an application perform badly or not at all.

    Product Name: QA·MISRA
    Company: Programming Research, Inc.

    QA·MISRA is recognized worldwide as the leading, most powerful, and most widely adopted solution for MISRA compliance available today. QA·MISRA automatically enforces the latest MISRA guidelines now and gives you a head-start to comply with the new SAE J2632 guidelines underway for tomorrow.

    Product Name: QA·C Source Code Analyzer
    Company: Programming Research, Inc.

    QA·C offers a simple way of analysing your code against your chosen coding standard, providing an effective and accurate solution to improving your software. Deploying industry standard metrics and providing code structure visualisations, QA·C brings a level of clarity to complex code, identifying issues long before they reach production. Through analysis your software becomes more robust, more maintainable and much more reliable.

    Product Name: QA·C++ Source Code Analyzer
    Company: Programming Research, Inc.

    QA·C++ is the market leading software analysis tool for C++, enforcing industry and custom coding standards in an intuitive, informative environment that expedites the development of reliable, maintainable code. Through diligent focus on published C++ coding standards QA·HIC++, QA·MISRA-C++, QA·JSF++, QA·C++ now has the highest and most accurate compliance to all these industrial standards.

    Product Name: Luna® SA
    Company: SafeNet, Inc.

    Luna SA features an integrated hardware security module (HSM) offering hardware key management and cryptographic acceleration for unrivalled security and performance. Luna SA 4.3 HSM is capable of up to 4,000 transactions per second*. Twice as fast as the competition, and offers optional standalone authentication to protect the most demanding security applications.

    Product Name: SafeNet ProtectDrive
    Company: SafeNet, Inc.

    ProtectDrive is a Common Criteria (CC) EAL2 certified complete drive encryption solution that protects all data (including operating system files) stored on the hard drive of laptops, workstations, or servers. It is commonly employed to protect against disclosure of sensitive information in the case of theft or accidental loss of the hardware device, or re-use after being sold or returned to the lessor.

    Product Name: Diagnostic Tool Set (DTS)
    Company: Softing AG

    The engineering and validation of ECU communication is often organized decentrally which means that a whole arsenal of tools tends to be used within just one division - in fact even within one department. These have to be supplied individually with ECU information.

    Product Name: SMT6036
    Company: Sundance Multiprocessor Technology Ltd.

    The SMT6036 is an efficient; ready to use; LINUX host side interface to Sundance hardware. It allows you to control Sundance carrier boards from the host as well as to exchange data between the host and TIM's on these carrier boards. SMT6036 is useful for systems using one of the FPGA modules as the root module. Use SMT6026 for Windows and SMT6036 for Linux OS.

    Product Name: Safety Test Builder
    Company: TNI-Software

    Safety Test Builder is a simple yet comprehensive solution dedicated to automating the production of test cases for embedded software, provided the software has been modeled using Simulink® and/or Stateflow® from The MathWorks

    Product Name: Carbon's VSP™
    Company: TRIAS Mikroelektronik GmbH

    Carbon's VSP™ is the first truly unified validation environment that allows multiple levels of abstraction to be validated together including C, SystemC, RTL, IP cores, transaction-level, and instruction-level models creating a virtual system prototype. The key to VSP is performance; the ability to execute billions of cycles and boot embedded operating systems, all with desktop software.

    Product Name: UltraPOST Embedded Diagnostics
    Company: Ultra-X Benelux B.V

    UltraPOST is a hardware diagnostic utility embedded into the PC’s BIOS. At just 32k of total code, UltraPOST easily embeds in your BIOS and acts similar to a CMOS Setup program. UltraPOST executes comprehensive diagnostic tests to detect major problems with various PC components when system fails to boot. With a simple and easy-to-use GUI(Graphic User Interface), UltraPOST operation is effortless and requires no boot disks.

    Product Name: CMT++
    Company: Verifysoft Technology GmbH

    CMT++ Complexity Measures Tool is a tool for analysing the static complexity of software written in C or C++. The code complexity is known to correlate with the defect rate and robustness of the application program. Complex code is difficult to test: probably more errors remain unrevealed in the final program. Complex code will in itself be more error-prone and affect the defect rate of the final application. Complex code is also difficult to maintain

    Product Name: CTA++
    Company: Verifysoft Technology GmbH

    CTA++ is a tool for unit testing C++ classes, libraries and subsystems. CTA++ is simple to use and provides very powerful features helping the tester to build the testing environments and running the tests on C++ code. The testing process becomes efficient, visible and organized - as required in a professional testing environment

    Product Name: CTC++
    Company: Verifysoft Technology GmbH

    CTC++ is a powerful instrumentation-based tool supporting testing and tuning of programmes written in C and C++. This test coverage analyser supports coverage for function, decision, statement, condition and multi-condition. CTC++ is available for coverage measuring in the host, for operating systems kernel (kernelcoverage) as well as for targets (embedded systems).

    Design Services : IC Design Services

    Product Name: SPICE Modeling Services
    Company: Accelicon Technologies

    We offer advanced test structure design for DC, AC and RF modelling, mismatch, interconnect modelling, reliability.

    Product Name: DNMEG Array Daughter Cards
    Company: Dini Group

    This page describes all of the MEG-Array daughter card expansion options available for Dini Group products. All of these cards are compatible with the DN9000K10-series and DN7000K10-series boards; for compatibility with DN8000K10-series board please see the Daughter Card compatibility guide

    Product Name: MBear
    Company: lesswire AG

    The MBear Module is targeted for integration into different products of OEM partners enabling them to communicate over long distances. The module has a UART interface for serial communication and configuration and a one-pin antenna connection.

    Product Name: ProtoMat H100
    Company: LPKF Laser & Electronics, North America

    The ProtoMat H100 is a high-end PCB milling system offering maximum performance and an expanded working area for processing large printed circuit board applications. Its 100,000 rpm spindle and high accuracy ensure board geometries are milled with precision. This makes the H100 ideal for RF and microwave applications.

    Product Name: Experience design freedom through NXP’s power management solutions
    Company: NXP Semiconductors

    Experience design freedom through our advanced power technologies and support from our global organisation. Our broad portfolio covers everything from the smallest MOSFETs for mobile phones to dedicated power management ICs for DVD+RW applications. This simplifies your choice of power management solution to meet the needs of a wide variety of applications and ensure consumers are always connected.

    Product Name: MFRC50001T
    Company: NXP Semiconductors

    The receiver module provides a robust and efficient demodulation/decoding circuitry implementation for compatible transponder signals. The digital module, manages the complete ISO/IEC 14443 A standard framing and error detection (parity and CRC). In addition, it supports the fast Crypto1 security algorithm for authenticating the MIFARE products.

    Product Name: IDM680 Intelligent Servo Drive
    Company: TECHNOSOFT

    IDM680 is a member of the IDM family of fully digital intelligent servo drives with embedded motion controller. Equipped with a CANopen, or an EtherCAT() communication interface, this high-performance intelligent servo drive combines motion controller, drive and PLC functionality in a single compact unit.

    Product Name: VT-3162T
    Company: Tronson Electroncis Co., Ltd

    Features : 1 ) IEEE 802.3 Ethernet compatible ( 10 Base-T / 10 Base 5/10 Base2 ) 2 ) 2000 Vrms isolation meet IEEE802.3 safety requirement for LAN . 3 ) Through-hole DIL 16 Pins Standard . 4 ) Customer design available for specific application .

    Product Name: VT-7901S
    Company: Tronson Electroncis Co., Ltd

    T1/E1/CEPT/ISDN-PRI TRANSFORMER

    ASIC and IC Design : IC Physical Design Tools

    Product Name: Automation Software
    Company: Advantech Co., Ltd.

    Software plays a vital role in developing automated data acquisition and control systems. The software you use in these systems spans a broad range of functionality, from device drivers for controlling specific hardware interfaces to application software packages for developing systems.

    Product Name: PC/104 Data Acquisition & Control Modules
    Company: Advantech Co., Ltd.

    Advantech PC/104 industrial communication boards, featured with Ethernet, RS-232 or RS-422/485 ports, are designed for communication applications that require good reliability and ease-of-use. These boards can be applied into embedded multiport applications.

    Product Name: Pre-configured System
    Company: Advantech Co., Ltd.

    Expertly configured for general applications, this new products line features Advantech's most popular CPU boards, chassis, backplanes and peripheral components and save your time on system assembly and integration at the best price-performance ratio.

    Product Name: GlobeViewer
    Company: AnaGlobe Technology, Inc.

    GlobeViewer is more than just another layout viewer. It provides many value-added features, in addition to the rich set of viewing/measure functions, for industry standard GDS (for IC layout), MEBES pattern and job (for IC photo mask) formats.

    Product Name: AIEC / ARM966E-S™
    Company: Automotive Integrated Electronics Corporation

    The AIEC / ARM966E-S™ Microprocessor Core (AIEC9) is a high-performance, low-cost 32-bit microprocessor core that is intended as a platform for custom automotive System on Chip (SoC) developments. The high-performance of the AIEC9 is in part due to the memory architecture, which has been optimized for real time control systems where deterministic performance is achieved through execution of instructions directly from flash. An interleaved flash controller allows zero wait state execution of sequential code even with comparatively slow flash.

    Product Name: J1850VM
    Company: Automotive Integrated Electronics Corporation

    The J1850VM fully supports the SAE Recommended Standard J1850 Class B Data Communication Network Interface for both single byte and consolidated headers using Variable Pulse Width (VPW) modulated bit encoding.
    The J1850VM automatically handles the protocol details including message buffering, arbitration, frame delimiters, error detection, and cyclical redundancy generation and checking.

    Product Name: Beckhoff Bus Terminal
    Company: Beckhoff Automation GmbH

    The I/O signals are wired in a decentralised way to fieldbus devices or centrally to the controller. The available manufacturer-specific fieldbus devices with fixed input/output configurations and design often make it necessary to use an entire group of devices with similar functions. This costly method of signal acquisition gives rise to high material, installation, planning and documentation costs as well as high costs for subsequent modification or expansion.

    Product Name: Beckhoff Fieldbus Box
    Company: Beckhoff Automation GmbH

    The Beckhoff Fieldbus Box system is the culmination of the fieldbus concept: Robust construction allows fieldbus modules to be fitted directly to machines. Control cabinets and terminal boxes are now no longer required.

    Product Name: Beckhoff TwinCAT
    Company: Beckhoff Automation GmbH

    PLC and Motion Control on the PC. The Windows Control and Automation Technology. The Beckhoff TwinCAT software system turns any compatible PC into a real-time controller with a multi-PLC system, NC axis control, programming environment and operating station. TwinCAT replaces conventional PLC and NC/CNC controllers as well as operating devices.

    Product Name: LithoTuner™
    Company: Brion Technologies

    Full chip analysis ensures that every critical structure is addressed in the matching optimization. Matching is no longer constrained to simple 1D through-pitch or limited pattern sets. Matching now finds and optimizes all sensitive patterns through the full process window. For the first time, matching optimization can cover the full chip over the entire process window, and with the exact variances of the actual scanners in the fab.

    Product Name: Tachyon™ FEM
    Company: Brion Technologies

    Tachyon Focus-Exposure Modeling (FEM) empowers the user to create a single lithography process model that accurately simulates focus-exposure lithography variations in the ever-shrinking process window of today's subwavelength regime.

    Product Name: ICARuS
    Company: CAD Science, Inc.

    This is programmable Tcl and edge based full featured DRC tool with high programmability. It supports 90nm and 65nm rules and it even includes layout modifications which other tools don't provide.

    Product Name: Cadence Chip Optimizer
    Company: Cadence Design Systems, Inc.

    Conventional IC implementation tools create oversimplified models of interconnect. Cadence® Chip Optimizer is a silicon-proven, full-chip physical design optimization system that improves manufacturability, yield, and performance. It optimizes layout based on electrical constraints, manufacturing rules, and timing objectives.

    Product Name: Virtuoso Layout Migrate
    Company: Cadence Design Systems, Inc.

    Cadence® Virtuoso® Layout Migrate is the physical layout migration tool within the Cadence Virtuoso custom design environment. It supports fast process and design rule migration of hard IP, custom digital designs, mixed-signal blocks, memories, and standard cell libraries.

    Product Name: Virtuoso NeoCircuit Circuit Sizing & Optimization
    Company: Cadence Design Systems, Inc.

    Cadence® Virtuoso® NeoCircuit performs automatic circuit sizing and optimization for custom digital, RF, and mixed-signal circuits. Integrated with the Virtuoso custom design platform, Virtuoso NeoCircuit leverages the Virtuoso Schematic Editor and employs the designer’s simulator of choice to size, bias, and verify circuits interactively with a manual starting point or automatically without any starting point. 

    Product Name: Virtuoso® Chip Assembly Router
    Company: Cadence Design Systems, Inc.

    Cadence® Virtuoso® Chip Assembly Router is the custom block and chip authoring routing tool of the Virtuoso platform. As a constraint- and design rule-driven interactive and fully automatic shape-based router, it supports block authoring and chip authoring solutions for custom digital, mixed-signal, and analog designs at any level of the hierarchy—transistor, cell, block, and chip, as well as advanced chip interconnect.

    Product Name: Virtuoso® Chip Editor
    Company: Cadence Design Systems, Inc.

    Cadence® Virtuoso® Chip Editor is the centerpiece of the Virtuoso custom design platform’s full-chip integration component. It provides high-performance editing for full-chip finishing tasks and can handle even your largest designs. Virtuoso Chip Editor is fully interoperable with the Cadence Encounter® digital IC design platform and it leverages the industry-standard Virtuoso Layout Editor environment and infrastructure for layout productivity when you need it most—at tapeout.

    Product Name: Virtuoso® Schematic Editor
    Company: Cadence Design Systems, Inc.

    Cadence® Virtuoso® Schematic Editor provides numerous capabilities to facilitate fast and easy design entry, including design assistants that speed common tasks by as much as 5x. Well-defined component libraries allow faster design at both the gate and transistor levels. Sophisticated wire routing capabilities further assist in connecting devices.

    Product Name: R8051XC Configurable 8-bit Microcontroller Core
    Company: CAST, Inc.

    A configurable, single-chip, 8-bit microcontroller core that can implement a variety of fast processor variations executing the MCS® 51 instruction set.

    Product Name: SCADA Encryptors
    Company: D Crypt Private Limited

    D’Crypt’s SCADA Encryptor is a protocol transparent RS232 Serial Link Encryptor. It is used to secure the communication links in a SCADA network. The SCADA Encryptor integrates the d’Cryptor ZE that has been certified to FIPS 140-2 Level 3 (Certificate No. 637). The encryptor is designed to operate in harsh environment and can support a range of different RTU protocols.

    Product Name: Smart Card Adaptor (SCA)
    Company: D Crypt Private Limited

    D’Crypt’s Smart Card Adapter is a card-neutral OEM reader module that operates with various types of contactless smart cards. The Smart Card Adapter comprises a cryptographic core certified to FIPS 140-2 Level 3 (Certificate No. 637) and integrates interfaces to contactless A, B, and C cards. The adapter can be integrated with LCD and casing as a payment or loyalty terminal, or be integrated into ATMs or vending machines. With all keys stored in the cryptographic core, additional security devices like SAMs are no longer necessary.

    Product Name: DW 2000
    Company: Design Workshop, Inc.

    dw-2000™ addresses the design requirements of physical layout and verification of analog and mixed-signal integrated circuits. Although available as separate modules, dw-2000 is an integrated environment consisting of a full-featured Layout Editor, a comprehensive Design Rule Checker, a reliable LVS and a Data Conversion Module. All these modules share a common powerful Programming Environment allowing almost unlimited extendibility.

    Product Name: Altera
    Company: Dini Group

    The DN7002k10MEG is a complete logic emulation system that enables ASIC or IP designers a vehicle to prototype system-on-a-chip (SOC) logic and memory designs for a fraction of the cost of existing solutions. It can be used stand-alone or hosted via a USB interface and massive amounts of expandability. A single DN7002k10MEG configured with two Altera Stratix IV 4SE820 FPGAs can emulate more than 13 million gates of logic as measured by a conservative ASIC gate-counting standard. Any subset of FPGAs can be stuffed and each FPGA position can be stuffed with any available speed grade.

    Product Name: Electronic Load Module (Voltage Range: up to 800 V)
    Company: dSPACE GmbH

    The concept of the electronic load emulator can be used for simulating all types of motor. The physical properties of each motor, such as motor inductivity, torque generation and power consumption, are represented very realistically. For variable inductivities (such as in an interior permanent magnet or IPM motor, or with saturation effects), mean values have to be used in the load emulator due to the constant substitute inductivities. Nevertheless, correct representation of the torque and the power is possible. Any desired hybrid and electrical vehicle configurations can be simulated by using different electric motor models in conjunction with variable drivetrain models (for example, Automotive Simulation Models. The concept is also suitable for various industrial HIL applications.

    Product Name: 4-Bit MCU for LCD Product
    Company: Elan Microelectronics Corp.

    EM73361A is an advanced single chip CMOS 4-bit micro-controller. It contains 3K-byte ROM, 52-nibble RAM, 4-bit ALU, 13-level subroutine nesting, 22-stage time base, two 12-bit timer/counters for the kernel function. EM73361A also contains 3 interrupt sources, 1 input port, 4 bidirection I/O ports, built-in watch-dog-timer counter, tone generator and LCD driver (27x3 to 13x3).

    Product Name: 8-Bit MCU for General Purpose Product
    Company: Elan Microelectronics Corp.

    Applications specified to Home Appliance, Security, Charger, PC Peripheries, TV Game, Information Products, Health Products, RF ID, Toy and Gift.

    Product Name: 8-Bit MCU for LCD Product
    Company: Elan Microelectronics Corp.

    The EM78860 is an 8-bit RISC type microprocessor with low power , high speed CMOS technology .Integrated onto a single chip are on-chip watchdog (WDT) , RAM , ROM , programmable real time clock / counter , internal interrupt, power down mode , LCD driver and tri-state I/O . The EM78860 provides a single chip solution to design a message display .

    Product Name: eKK8301 Keyboard Controller
    Company: Elan Microelectronics Corp.

    The eKK8301 microcontroller is dedicated to a keyboard encoder, specially designed for IBM PC AT and all compatible machines. The eKK8301 control all scan codes, three LEDs status, scan timing and communications between the keyboard and PC. It is easy to implement a high performance, low cost keyboard with the minimal external components.

    Product Name: Graphic Colour STN LCD Drivers with Built-in RAM
    Company: Elan Microelectronics Corp.

    EM65568 is one of the industry’s most advanced wide-screen STN-LCD drivers for 4096-color display. The industry’s first sub-screen display function makes it possible to display different images and data in a sub-screen inside the main LCD screen. It also has a built-in display RAM, a power supply circuit for LCD drive, and an LCD controller circuit, therefore contributing to compact system design. Its partial display function realizes low power consumption.

    Product Name: Pillar-DP®-Navis
    Company: Entasys Design, Inc.

    There is a rich set of tools available today to support chip design at the register-transfer level. After years of research and development, most of all SoC designers have fairly good understanding on design process based on the RTL of representation.

    Product Name: Pillar-DP®-Ventus
    Company: Entasys Design, Inc.

    At the early stage of SoC design, there are many unknowns and SoC designers have many options available, so this is why making the right choices can be difficult. As behavioral description is not just sufficient to describe the constraints of today's complex SoC design, the innovative methodology is needed to specify and analyze a higher-level of the design representation in early design stage and answer questions about floorplanning, power consumption, area and timing.

    Product Name: ESD0064 – 64 POINT FFT
    Company: Esencia Technologies

    The ESD0064 core implements 64 point FFT in hardware. FFT 64 works on blocks of 64 complex data samples.

    Product Name: ESD1024c – ESD1024c – Configurable 1024/512 point FFT
    Company: Esencia Technologies

    The ESD1024p core implements 1024 or 512 point FFT in hardware. It can be dynamically configured to process one 1024 or two simultaneous 512 point FFT/IFFT operation.

    Product Name: FishTail
    Company: FishTail Design Automation, Inc.

    IC design is not getting any easier. With increased gate counts, higher clock speeds, smaller chip sizes and reduced power requirements, designers have a very difficult task. Today's virtual prototyping and chip-implementation tools are powerful and address several key deep-sub micron issues, but there remains a fundamental conundrum.

    Product Name: 802.15.4 Platforms ICs
    Company: Freescale Semiconductor Inc.

    Freescale has raised the bar 802.15.4 platform IC by integrating the RF transceiver and low power MCU into a single chip.  The MC1321x family integrates an 8-bit MCU with an IEEE® 802.15.4 compliant 2.4 GHz transceiver into a single 9x9mm LGA package.

    Product Name: MPC8610: Integrated Host Processor
    Company: Freescale Semiconductor Inc.

    The MPC8610 processor is engineered to deliver breakthrough performance, connectivity and integration for embedded applications that process or display graphical images, such as kiosks, robotics, in-vehicle infotainment, cockpit displays, single-board computers and multi-function printers and scanners.

    Product Name: Power Management and User Interface ICs
    Company: Freescale Semiconductor Inc.

    Our highly integrated Power Management & User Interface (PMUI) ICs provide coordinated power sequencing, low consumption standby modes, and seamless power switching. The higher integration levels enabled by Freescale's SMARTMOS™ technology bring extended functional content to include a host of convenience features and user interface capabilities.

    Product Name: RF Amplifier ICs and Modules
    Company: Freescale Semiconductor Inc.

    ICs and Modules

    Product Name: INTEGRITY®-178B RTOS
    Company: Green Hills Software, Inc.

    INTEGRITY-178B has been engineered from the ground up to provide security and determinism.

    Product Name: VeloceWired
    Company: Helic, Inc.

    Bondwires are a popular and low-cost assembly option for a wide range of IC packages. In high-speed IC design, bondwires introduce parasitics such as inductance and magnetic coupling which may affect product performance significantly. To meet demanding requirements, IC designers now have the ability to draw, model and optimize bondwires as parts of their circuits.

    Product Name: 3GPP Compliant Decoder Core - S3000
    Company: iCODING Technology Incorporated

      The iCODING S3000 Turbo Decoder implements the standard 3GPPTM universal mobile telecommunications system (UMTS), rate 1/3, 8- state PCCC turbo decoder. It uses a highly efficient architecture to minimise area and memory usage whilst still providing the high performance through the use of a full log MAP implementation, combined with good internal parameter scaling/quantisation. This is all at a data throughput of up to 7 Mbit/s in FPGA. Handset throughputs of 2Mbit/sec are achieved with clock rates as low as 19 MHz.

    Product Name: Vectoring xDSL Gateway Processors
    Company: Ikanos Communications

    The Fusiv® Vx585 family of vectoring xDSL gateway processors set a new performance bar for next-generation smart residential gateways, reaching aggregate (combined upstream and downstream) data rates of up to 400Mbps with VDSL2 bonding, while providing 11GHz of offload processing for cloud access, dual-band, dual-concurrent WiFi acceleration (AC1750), LAN management and QoS, and secure content processing and distribution.  In addition, the processors accelerate the company’s industry-leading diagnostics and monitoring software suite, inSIGHT™ Broadband eXperience Manager (BXM), ensuring quick resolution of wiring impairments and noise interference.

    Product Name: INDY® RFID READER CHIPS
    Company: Impinj Inc.

    The Impinj® product line includes the Indy® RFID reader chip family, based on award-winning technology acquired from Intel Corporation. This three-chip family of highly integrated reader chips and supporting software provide a platform for designing a wide range of devices that embed RFID read/write capability. Indy reader chips lower design complexity, cut manufacturing costs, and increase reliability.

    Product Name: MONZA® 5 RFID TAG CHIPS
    Company: Impinj Inc.

    With unique features such as FastID™ inventory that supports fast authentication, and a TagFocus™ mode that facilitates the reading of difficult-to-reach tags, Monza 5 tag chips are the ideal solution for item‑level tagging of apparel, electronics, cosmetics, and jewelry, or any other application that requires high-volume, high-performance, serial-numbered tags.

    Product Name: ESD Diode for TSMC .13u LV or G Process
    Company: Impulse Semiconductor Inc

    The Impulse TSMC .13u ESD diode was made to provide ESD discharge paths when integrating third party IP in an integrated circuit design for total ESD protection. The Impulse ESD diode has been successfully used with Dolphin Technologies, Artisan/ARM, TriCN/Synopsis I/O libraries, as well as popular IP blocks from RAMBUS, Chip Idea and other quality IP vendors. A 5.5 volt reverse bias anode to cathode operational specification enables the Impulse TSMC .13u ESD diode to be the device of choice for 5 volt tolerant designs.

    Product Name: Impulse Semiconductor
    Company: Impulse Semiconductor Inc

    The Impulse Semiconductor High Current Transmission Line Pulse (TLP) test system is the tool of choice for extracting ESD parameters for transient protection devices in a package, or at wafer level. With accuracy better than 100 milliohms at 40 amps peak current, the Impulse high current TLP is specially tailored to the needs of today’s ESD device designers who must accurately measure low values dynamic resistance irrespective of breakdown voltage.

    Product Name: Transmission Line Discharge Networks
    Company: Impulse Semiconductor Inc

    The Impulse transmission line pulser (TLP) discharge networks are easily integrated with other instruments for a custom system matched for your device and process applications. Specifications include 1-10 nanosecond rise times, up to 40 amps peak, for 10-500 nanosecond pulse widths. It is a proven design incorporating 15 years of hardware and device development experience. Reliable performance over hundreds of processes, and thousands of products. All TLP systems are built by special request, contact us with your specifications or application.

    Product Name: Automotive System IC
    Company: Infineon Technologies

    For a comprehensive and reliable portfolio of products for automotive and other applications, look no further than the product range from Infineon. We have used our 40 years of experience of developing and producing products to meet the demands of the automotive market, and our innovative technologies to design and produce a large number of power products that meet all requirements of the automotive industry and also the transportation, lighting and motor-drive industries.

    Product Name: IC-PQ2-PMCb
    Company: INTERFACE CONCEPT

    IC-PQ2-PMCb PMC is an high integrated module with single board computer functionalities. This rugged PMC board is intended for embedded application with specifi c needs of conduction-cooled systems. This card has been designed in accordance with ANSI Vita 20 and IEEE1386.1 PCI mezzanine card standard.

    Product Name: IC-PQ2-PMCc
    Company: INTERFACE CONCEPT

    IC-PQ2-PMCc PMC module is designed in accordance with IEEE1386 standard. It features a high performance 32 bits PowerPC processor with three Fast Ethernet controllers. A local co-processor takes in charge all communication
    functionalities unloa-ding thus the PowerPC processor.

    Product Name: IC-PQ2-VMEa
    Company: INTERFACE CONCEPT

    IC-PQ2-VMEa is powered by a MPC8270 (0,13μm process technology), being part of the PowerQUICCII processor family. This embedded processor couples a 603e core with a RISC communication processor and three Fast Ethernet controllers. The MPC8270 implements a full PowerPC core with integer unit, FPU, MMU, fully compliant with the PowerPC family.

    Product Name: IC-PQ3-VMEa
    Company: INTERFACE CONCEPT

    IC-PQ3-VMEa is powered by a MPC8555E or a MPC8560, being part of the PowerQUICCIII processor family. This e500 core is a 2-way super-scalar and 7-stage pipeline design with out-of-order issue and execution.

    Product Name: Back-End Defect Inspection
    Company: KLA-Tencor Corp.

    KLA-Tencor, through its ICOS division, offers a series of standalone defect inspectors for various applications in the semiconductor packaging field. Our Component Inspector (CI) products inspect various semiconductor components that are handled in a tray, such as microprocessors or memory chips.

    Product Name: Front-End Defect Inspection
    Company: KLA-Tencor Corp.

    KLA-Tencor’s front-end defect inspection tools cover the full range of yield applications within the IC chip manufacturing process, including incoming the wafer qualification process,the reticle qualification process, research and development, and tool, process and line monitoring. Patterned and unpatterned wafer defect inspection tools find particles, pattern defects and electrical issues on the front surface, back surface and edge of the wafer, allowing engineers to detect and monitor critical yield excursions within the IC chip manufacturing process.

    Product Name: ICOS CI-T120S/ CI-T130S Component Inspection
    Company: KLA-Tencor Corp.

    The CI-T120S and -T130S Component Inspection systems are configured for highly accurate metrology, and high-volume 2D bump and 3D bump inspection, of flip-chip substrates. These component inspection systems combine bump inspection, substrate top and bottom surface inspection, and substrate warpage inspection — all in one system. These component inspection systems can measure a wide range of package sizes and features with rapid changeover, making them ideal for quality control on flip-chip substrates.

    Product Name: LED Wafer Manufacturing
    Company: KLA-Tencor Corp.

    High Brightness LED (“HB-LED”) usage is increasing for new applications as manufacturing costs decrease and performance improves. HB-LED applications such as mobile phone LCD screens and keypads and flashlights for camera phones have been the drivers for HB-LED wafer manufacturing market growth in the last couple of years, as well as car headlights, LCD TV backlights and traffic signaling.

    Product Name: Wafer Manufacturing
    Company: KLA-Tencor Corp.

    KLA-Tencor’s wafer manufacturing tools include wafer inspection, wafer shape quality review, metrology and data management systems. Specialized wafer quality inspection tools assess wafer surface quality and detect, count and bin defects during the wafer manufacturing process and as a critical part of outgoing wafer quality inspection. Wafer geometry systems ensure the wafer shape is extremely flat and uniform in thickness, with precisely controlled wafer shape topography.

    Product Name: CompactPCI
    Company: Kontron

    Today’s demands on industrial PC technology require intelligent, cost-optimized products that are suitable for rugged environments and ensure longevity. These factors, along with many others, bring system designers back to the robust, modular and standardized CompactPCI / CPCI platforms. Available in both 3U and 6U form factors, this technology offers the latest and fastest Intel® Core™ processor technology for applications across all market spaces. Driven and supported by the PICMG group for more than 10 years, CompactPCI (CPCi) platforms are designed for modularity, ruggedization, Hot Swap, system management and provide densed computing performance, which is supported by optimized air or conduction cooled concepts.

    Product Name: PCI Express
    Company: LeCroy Corporation

    LeCroy Summit T2-16 Protocol Analyzer
    The LeCroy Summit T2-16 is our most full-featured protocol analyzer for PCI Express, and the first product on the market to support PCI Express Spec 2.0 ("Gen2") including 100% data capture on data rates up to 5 Gb/s.

    Product Name: HWC
    Company: lesswire AG

    With the HWC lesswire offers OEMs and system integrators a programmable gatway and application server enabling them to implement Building Automation and Smart Metering solutions. With its 868 MHz and 2.4 GHz wireless interface it allows for flexible integration.

    Product Name: WiBear 11g
    Company: lesswire AG

    The module supports IEEE 802.11b/g WLAN station (client) and micro access point operation modes. It provides a complete end-to-end solution for low-power applications. The WiBear 11g includes an integrated MAC/Baseband processor and RF front-end components and can connect to a host processor through SDIO/SPI interface. Host drivers for common operating systems such as Linux, Android, and Windows Mobile are available. The modules are radio type approved for Europe (CE) and the United States (FCC).

    Product Name: CellOpt™
    Company: Library Technologies, Inc.

    CellOpt is a dynamic circuit level power/timing optimizer designed to minimize the power dissipation of standard build blocks like logic gates and sequential elements, with optional timing constraints, by properly sizing the devices used in the circuit. After all, energy is consumed by these components, and how well they are designed and how well they fit to their particular use on the chip is of paramount importance.

    Product Name: PeakView EM Designer
    Company: Lorentz Solution

    PeakView EMD™ provides EM device synthesis of advanced on-chip passive devices. Designers work with a friendly user interface while PeakView EMD eliminates the time consuming manual step of drawing devices by hand.

    Product Name: PeakView Layout EM
    Company: Lorentz Solution

    PeakView’s LEM™ structural simulation and extraction solution provides fast, easy to use, “1-click” 3D EM simulation from inside Cadence® Virtuoso®. Any Virtuoso layout view with passive structures and interconnect is automatically extracted and a full 3D EM simulation run in matter of a few minutes, without leaving the Virtuoso environment. PeakView LEM’s high-capacity handles the most complex multi-port structures returning an accurate multi-port EM model in minutes. PeakView LEM also supports custom inductor layout and modeling allowing designers to iteratively “tweak” precisely architected devices during layout to optimize performance objectives.

    Product Name: LAYTOOLS
    Company: MATRICuS Inc.

    LAYTOOLS is a custom integrated circuit design suite optimized for complex analog, digital, and mixed-signal IC design. The suite includes applications for schematic capture, physical layout, database verification, automated place and route, plotting, and data conversion tools

    Product Name: SPE
    Company: MATRICuS Inc.

    SPE (Schematic Probe Environment) is a flexible and powerful full-function multi-level schematic capture environment developed particularly to enable IC circuit design engineers to enter schematics accurately, clearly and quickly. In addition it provides the ability to cross-probe between schematic and layout views using the network extracted.  

    Product Name: DPC DataPath Compiler
    Company: Micro Magic, Inc.

    DPC is the tool used by designers needing high performance chips. They want the performance of full custom design, but with a much shorter design cycle. Datapaths designed with DPC are 3X (three times) faster and 40% smaller than synthesis and place and route. At the same time, it takes 10X (ten times) less effort than full custom design

    Product Name: MAX and MAX-LS
    Company: Micro Magic, Inc.

    MAX is much more than a layout tool; it is an intelligent IC layout environment. MAX includes interactive cross-probing between layout and schematic. Automatic generation of layout from schematics (a feature of MAX-LS) provides true schematic-driven layout. And, with real-time interactive DRC, MAX shows you any DRC errors right on the layout! No memorizing design rules or counting grids.

    Product Name: SUE Design Manager
    Company: Micro Magic, Inc.

    SUE is not just another schematic capture tool. SUE is a quantum leap in technology that gives the designer the ability to enter, visualize, and control large, complex chip designs. It is a complete design environment in which to capture all levels and types of design information

    Product Name: LineSpeed 100G PHYs
    Company: MoSys Inc

    MoSys® LineSpeed™ 100G PHYs are optimized to enable higher-density, lower-power data path connectivity as electrical interface rates transition from 10Gbps to 25Gbps, which is necessary to support 100G optical links. When combined with the packet processing offload capabilities of the Bandwidth Engine family of ICs, MoSys' solutions are enabling speed, density and intelligence in the network.

    Product Name: CLRC63201T
    Company: NXP Semiconductors

    The CLRC632 supports contactless communication using MIFARE higher baud rates. The receiver module provides a robust and efficient demodulation/decoding circuitry implementation for compatible transponder signals.

    Product Name: OptEM Package
    Company: OptEM Engineering, Inc.

    OptEM Package is a post-layout verification tool for the extraction, electromagnetic analysis, and modeling of advanced IC package interconnects. The software reads DXF or GDSII design files, and combines this layout data with physical process information to generate optimized SPICE models for any number of package traces in the design

    Product Name: Silicon TV Tuner (ORC53xx)
    Company: Orca Systems

    ORC53xx is a highly integrated universal terrestrial& cable silicon tuner supporting worldwide analog, digital broadcast standards. The universal hybrid TV silicon tuner is based on Orca Systems’ patented DSP-RF™ technology enabling exceptional tuner performance.

    Product Name: ENCOMPASS PRODUCT NAVIGATION
    Company: Perception Software

    Here’s the problem. A product engineer can’t even begin to build a new product – or optimize an existing one, for that matter – without first tracking down a ton of information that’s scattered through a multitude of disparate systems. What kind of LED would work here? Do we already have one? What products is it in? Is it any good? Maybe Paul knows. And even after spending hours – or longer – there’s no guarantee of getting the right information.

    Product Name: Double-layer
    Company: PFC Flexible Circuits Limited

    Below is the construction for a double layer flex circuit. Double layer signifies that there are two layers of copper circuitry. In most cases, the two layers of copper are electrically connected by drilling small holes through the copper circuits and the separating dielectric, then plating the holes with copper to make a connection between them. The slide show presents the artwork required for each layer of the circuit build.

    Product Name: Multi-layer
    Company: PFC Flexible Circuits Limited

    A flex is considered multi-layer when it is over two layers. Via holes are used to connect the different layers of copper. Below is a slide show of a four layer flex for a digital camera application. With this design you can really see how flex circuits can assist in electronic packaging.

    Product Name: Unity™ Chip Planne
    Company: Pulsic Limited

    As semiconductor-processing technologies move toward smaller geometries, the complexity of custom integrated circuits (ICs) increases significantly every year. However, many custom design teams are still using the same, primarily, manual floorplan assembly methodologies that have been
    used for the last 10 years or more. Pulsic Unity Chip Planner, the first truly hierarchical floorplanner for custom design, enables custom design teams to manage growing complexity while accelerating design closure and improving design quality.

    Product Name: Unity™ Signal Planner
    Company: Pulsic Limited

    As custom integrated circuits (ICs) grow in size and functionality, both manual routing and semi-automated routing using traditional routers have reached their practical limits. Partitioning large designs into discrete hierarchical blocks, each assigned to a separate layout team, fails to address the complexity of routing between the blocks, completing top-level routing, and resolving congestion at each level of hierarchy.

    Product Name: Pyxis NexusRoute
    Company: Pyxis Technology, Inc.

    Pyxis NexusRoute is a next generation auto-router architected to address existing and emerging challenges for physical design of nanometer technology integrated circuits. Its underlying architecture enables the simultaneous optimization of design and manufacturing closure resulting in up to 4X reduction in design closure with yield improvements of up to 10%. 

    Product Name: Rabbit RIO
    Company: Rabbit Semiconductor (acquired by Digi)

    The RIO (Rabbit I/O) is a versatile programmable I/O chip, featuring I/O expansion and specialty features compatible with any processor that has an available clocked serial port. Since the RIO is part of the Rabbit® family of devices, Dynamic C® library and sample programs are available to quickly integrate the RIO into Rabbit® systems.

    Product Name: Z48-MB1 (LabVIEW in a Matchbox)
    Company: Schmid Engineering AG

    A powerful and complete system for mobile data acquisition in the formfactor of a matchbox. Acquire, store, show and wirelessly communicate physical measurements such as accelerations, inclination, rotation, vibrations, schock, 3D motion and temperature.

    Product Name: XtractIM
    Company: SIGRITY, Inc.

    XtractIM helps IC package design teams assess package electrical performance issues tens of times faster than the fastest competitor and reduce time to market. XtractIM extracts package models from S parameters computed by full-wave field solvers, fully taking into account various electromagnetic interactions.

    Product Name: Expert Layout Editor
    Company: Silvaco

    Enables mask designers to achieve maximum density and performance in analog and digital layouts. Expert’s high-productivity design environment offers fast layout viewing, full editing features, large capacity, and powerful scripting for automation with parameterized cells (Pcells).
    Operating Systems: Linux, Windows, Solaris

    Product Name: Gateway Schematic Editor
    Company: Silvaco

    The front-end of Silvaco's Analog/Mixed Signal/RF IC Design platform. It is tightly integrated with Silvaco’s circuit simulation, digital simulation, layout, DRC, ERC, LVS, and parasitic extraction tools. Advanced hierarchical editing features are available on Unix, Linux, and Windows.
    Operating Systems: Linux, Windows, Solaris

    Product Name: SonicsLX
    Company: Sonics, Inc.

    SonicsLX SMART Interconnect solution contains a high performance advanced fabric with data flow services for the development of complex SoCs. SonicsLX utilizes state-of-the-art physical structure design and advanced protocol management to deliver guaranteed high bandwidth together with fine grained power management.

    Product Name: SonicsMX
    Company: Sonics, Inc.

    The SonicsMX SMART Interconnect solution contains a high performance advanced fabric and a comprehensive set of data flow services for the development of multicore SoCs. By utilizing state-of-the-art physical structure design and advanced protocol management, SonicsMX delivers guaranteed high bandwidth together with leading edge, fine-grained power management. Quality of Service, access security, and error handling features comprise a robust turn-key solution that facilitates higher design predictability and decreases chip development time.

    Product Name: SonicsStudio
    Company: Sonics, Inc.

    The SonicsStudio development environment accelerates every stage of System-On-Chip (SoC) design. From architectural exploration to synthesis, SonicsStudio provides an array of graphical and command line tools that provide SoC architects and designers a single environment within which the entire SoC can be assembled, configured, simulated, and final netlist generated.

    Product Name: EDA 3D Analysis Suite
    Company: Spatial Corporation

    The EDA 3D Analysis Suite enables rapid development of 3D analysis and integration with your application. The EDA 3D Analysis Suite provides all the preprocessing and 3D Visualization necessary to link your 2D application to your 2.5D and/or 3D proprietary solver capability. This suite of EDA Tools consists of a 3D modeler, a mesher subsystem that includes utilities to implement adaptive meshing, and a graphics display that is integrated and accessible through a unified API to streamline developer learning curves and accelerate development time.

    Product Name: Laker™ Custom Layout System
    Company: SpringSoft, Inc. (Acquired by Synopsys)

    The Laker™ Custom Layout System offers powerful solutions for analog, mixed-signal, memory, and custom digital IC design that address key pain points in the layout process. The Laker layout system provides an intuitive methodology and controllable automation that let you quickly achieve superior layout results.

    Product Name: Analog & Mixed Signal ICs
    Company: STMicroelectronics GmbH

    STMicroelectronics offers a wide range of high performance analog and mixed-signal products resulting in board space reduction, integration and cost savings.

    Product Name: Smartcard ICs
    Company: STMicroelectronics GmbH

    STMicroelectronics offers a full range of Secure Integrated Circuits and Advanced Platforms for smartcard and digital security applications.

    Product Name: Matrix1
    Company: TAEUS

    Matrix1 is a software application that provides engineers images and schematics of a competitor's IC in a user-friendly software application that runs on any Windows-based computer.Engineers now have the power to explore a competitor's IC in ways that were previously unavailable.   Matrix1 shows engineers how competitors solve technical problems.   Matrix1 helps engineers find the weaknesses in competitor’s chips.   Matrix1 allows engineers to leap-frog the competition.  Matrix1 empowers engineers to do their own investigations.

    Product Name: LE-575
    Company: Taiwan Commate Computer Inc.(COMMELL)

    The 5.25" embedded mini-board LE-575 based on the Intel® 945GSE Express Chipset, supports Intel Atom processor N270, implemented in 45nm technology, is power-optimized and delivers robust performance-per-watt for cost-effective embedded solutions.

    Product Name: L-Edit
    Company: Tanner EDA

    L-Edit is a complete analog and mixed-signal IC physical design environment. L-Edit offers fast rendering with a complete hierarchical physical layout design environment which supports: OpenAccess read/write, import of Cadence® Virtuoso® files, and Schematic Driven Layout with HSPICE®/ PSpice®/Verilog®/CDL support. Create layout that matches the schematic the first time with L-Edit.  Maximize efficiency with L-Edit physical design tools, reduce CAD manager’s support burden, and get up and running easily with platform independence and flexible licensing. FEATURES & BENEFITS:
    • Fast rendering
    • A complete hierarchical physical layout design environment
    • OpenAccess read/write support
    • Import Cadence® Virtuoso® files
    • Schematic Driven Layout (SDL) that uses netlist files in T-Spice™, HSPICE,  PSpice, structural Verilog, or CDL formats
    • Reduce manual routing with automated instance, real-time net flylines, nets & pins tracking, geometry marking/highlighting/by net and ECO tracking
    • Interactive, real-time Design Rule Checking (DRC)
    • Object snapping, node highlighting, macro support and layout generators

    Product Name: Motion Control Kits
    Company: TECHNOSOFT

    MCK28335, MCK28035, MCK2812 and MCK2407 DSP Motion Control Kits provide the fastest way to learn, evaluate, develop, test and implement DSP Digital Motion Control algorithms. Kits include a complete hardware development platform (DSP controller board, power inverter and a brushless motor equipped with Hall sensors and 500-line encoder) powered by high level graphical programming tools. You can directly drive the motor in AC or DC brushless mode through a set of ready-to-run examples. The dynamic behavior of the real time system can easily be analyzed through graphical displays of any of the system variables, for a quick optimization of the control algorithms.

    Product Name: TestDeveloper
    Company: Test Systems Strategies, Inc. (TSSI)

    TestDeveloper electronic design automation software efficiently analyzes timing from IC design simulation and generates high-quality, ATE-ready test files, reduces test time, and lowers costs for complex SoC devices.

    Product Name: MSP430 Ultra-Low Power Microcontrollers
    Company: Texas Instruments Inc.

    The MSP430 microprocessor platform of ultra-low-power 16-bit RISC mixed-signal processors from TI provides the ultimate solution for a wide range of low power and portable applications. TI provides robust design support for the MSP430 Microprocessor including technical documents, training, tools, and software.

    Product Name: Badger Platform®
    Company: Tuscany Design Automation, Inc.

    A high-performance platform for developing customized design tools. Nearly all functionality is exposed to extension languages: perl, tcl, and python. Its breath and depth of capabilities make it attractive for many types of EDA applications for designers and CAD engineers that need a fast and powerful way to implement tools. Badger makes it easier than ever before to build custom applications that are robust, reliable, deployable, and integrateable. Badger brings commercial support to engineers implementing proprietary design algorithms-a foundation that meets highest capacity and performance requirements, as well as delivering built-in readers / writers for industry standard file formats.

    Product Name: Tego™, the structured design accelerator
    Company: Tuscany Design Automation, Inc.

    A high productivity alternative to full-custom design, Tego provides rich and extensive visualization and rapid "what-if" analysis, including incremental timing and power calculations. Tego accelerates existing physical design flows for CPU/DSP cores and other critical blocks that are candidates for a structured design methodology.  Engineers using Tego discover a path to deterministic design closure, and deliver intelligent and reusable physical structures that are durable across products, and portable across libraries.

    Product Name: Tuscany Dashboard™
    Company: Tuscany Design Automation, Inc.

    The first web-enabled solution for the collaboration and visualization of IC design data, bridging front-end and back-end teams, Tuscany Dashboard aggregates all closure data into a single location and then produces comprehensive and readable web page visualization. By providing distributed development and access to consistent data views and history, engineers and managers can quickly understand the status of designs and come to closure on challenging requirements, even when engineers are working from multiple geographic sites, with multiple chips in progress, and with complex design constraints.

    Product Name: AVOLayout
    Company: Unique ICs

    AVOLayout is a layout editor, provides designers with graphic environment for layout design of analog and mixed signal ICs. It has user-friendly interface and full set of capabilities and features for creating and editing IC layout.

    Product Name: AVOSpice
    Company: Unique ICs

    AVOSpice is one of the programs of CAD system AVOCAD. It is a fast and accurate analog simulation module for to use in the design of VLSI (Very Large Scale Integration) circuits that combines the advantages of SPICE and fast-SPICE programs. AVOSpice applies specific data structures and mathematical methods, that provides for the improved efficiency in the time it takes to simulate without a loss in accuracy. It works both under Windows and UNIX.

    Product Name: GTcheck®
    Company: XYALIS

    GTcheck is a versatile tool, checking the integrity of  GDSII/OASIS/MEBES databases, extracting information like the list of layers, the design hierarchy, the top cell name, the  B-Box, ...

    Product Name: GTframe®
    Company: XYALIS

    GTframe is a fully automated frame generator, optimizing the number of chips on the reticle, creating bar code, inserting test structures, alignment marks based on the users constraints.

    Product Name: GTlayer®
    Company: XYALIS

    GTlayer permits the layers translation within GDSII/OASIS/MEBES databases.

    Product Name: GTmerge®
    Company: XYALIS

    GTmerge is an efficient tool to manipulate and merge large GDSII/OASIS/MEBES databases. GTmerge optionally performs renaming of all cells and warrants cell unicity in the resulting database

    Product Name: GTmuch®
    Company: XYALIS

    GTmuch is today the leading solution for Multi Project Wafers assembly. This tool allows the assembly of more than 100 chips in two hours, thanks to an automatic placement algorithm, saving time and silicon space. It generates a jobdeck or a final GDSII/OASIS file with their complete PDF documentation and XML file.

    Product Name: GTpick-cell®
    Company: XYALIS

    GTpick-cell and GTreplace® allows the extraction  and replacement of a cell from a  GDSII/OASIS database. The Typical application: change the ROM Code of a circuit at the latest moment.

    Product Name: GTreplace®
    Company: XYALIS

    GTpick-cell and GTreplace® allows the extraction  and replacement of a cell from a  GDSII/OASIS database. The Typical application: change the ROM Code of a circuit at the latest moment.

    Product Name: GTstyle®
    Company: XYALIS

    GTstyle is our latest metal filling tool, ideal for designs from 65nm and below. GTstyle contains advanced algorithms to DFM problems such as crosstalk, avoid too many floating caps, ... GTstyle does not use a model based approach.

    Product Name: GTviewer®
    Company: XYALIS

    Very efficient GDSII/OASIS/MEBES viewer. It includes many fancy features satisfying the needs of any ASIC designers.

    ASIC and IC Design : Intellectual Property (IP)

    Product Name: AES Core G2
    Company: Algotronix Ltd.

    This is a complete validated implementation of AES: all standard modes of operation and key lengths are supported. The core is developed in accordance with Federal Information Processing Standards Publication (FIPS PUB 197) “Advanced Encryption Standard (AES)” and tested in accordance with the NIST document “The Advanced Encryption Standard Algorithm Validation Suite (AESAVS)”, November 15, 2002.

    Product Name: G3 AES
    Company: Algotronix Ltd.

    The G3 AES core family is the third generation of Algotronix' AES technology. The G3 core is designed without compromise to be the most efficient and flexible implementation of AES available.

    Product Name: SPAUI and RXAUI
    Company: Allowtech

    SPAUI combines the benefits of both XAUI and SPI4.2 standards into a single SERDES-based interface, supporting MAC/Framer, NPU, and Traffic Management interconnection requirements. The interface extends the XAUI interface by introducing channelization and packet interleaving, and by refined flow control. SPAUI is implementation-friendly, supported easily by SERDES-based FPGA devices, and is backward compatible with the standard XAUI.

    Product Name: Arteris FlexNoC Interconnect IP
    Company: Arteris S.A.

    Arteris® FlexNoC™ provides on-chip connectivity for SoC IP blocks implementing any combination of AMBA® AXI™, AHB™, AHB-Lite, APB™, OCP and PIF protocols. Arteris FlexNoC is for SoC interconnects with low latency and high throughput requirements. FlexNoC provides support for the features needed by today’s SoCs, such as clock domain conversion, QoS, debug visibility and security.

    Product Name: C2C™ Chip to Chip Link™ Inter-chip Connectivity IP
    Company: Arteris S.A.

    The purpose of inter-chip connectivity IP is to connect two different chips together to share computing resources, limit chip-to-chip latency, or maintain the highest possible chip-to-chip bandwidth. Inter-chip connectivity is also often described as chip-to-chip, die-to-die or C2C links.

    Product Name: Atria Logic
    Company: ASICSoft, Inc.

    Atria Logic is a leading provider of HW/SW intellectual property (IP) products and services for multimedia processing and system-on-chip designs. Atria Logic delivers MPEG2/H.264 video codec IP solutions for ASIC/FPGA, and semiconductor IP products such as DDR I/II, USB, Ethernet MAC Controllers.

    Product Name: BDS XPCI32 PCI IP core
    Company: Brace Design Solutions

    BDS XPCI32 PCI IP core is a Xilinx (TM) LogiCORE (TM) PCI32 compatible PCI IP core.

    Product Name: BDS XPCI64 PCI IP core
    Company: Brace Design Solutions

    BDS XPCI64 PCI IP core is a Xilinx (TM) LogiCORE (TM) PCI64 compatible PCI IP core.

    Product Name: 1394b FPGA Link Layer Controller IP Core
    Company: DapTechnology B.V.

    The synthesizable IEEE1394b Link Layer Controller Core is based on the Link Layer Controller that has been used for several years in the FireWire analyzers produced by DapTechnology. The code is written in VHDL and reference designs are currently available for Xilinx and soon for Altera FPGAs.

    Product Name: D68XX DoCD - DCD on Chip Debugger
    Company: Digital Core Design

    Join to our team and improve your design skills. IP Core implementations has never been easier before. Thanks to the D68XX DoCDTM you get complete debugging system, dedicated for DCD's Motorola compatible D68XX Microprocessors and Microcontroller IP Cores. System supports all the 68XX Cores offered by DCD.  

    Product Name: DoCD
    Company: Digital Core Design

    The future is now... Digital Core Design believes in Power of Innovation. Thanks to our revolutionary on-Chip Debugger you can easily become a part of that innovation. The DoCDTM is a complete debugging system, dedicated to DCD's DQ80251/DQ8051/DT8051/DP8051x/DP80390x Microcontroller Cores.

    Product Name: PIC DoCD
    Company: Digital Core Design

    Power of Innovation is our primary target. That's why our R&D focuses on every IP Core detail. As a result of that anxiety there have been some unique solutions born. On of them is the PIC on-Chip Debugger (DoCDTM), which is complete debugging system, dedicated for DCD's DFPIC16XXX/DRPIC16XXX Microcontroller Cores.

    Product Name: Flexibilis Ethernet Switch (FES)
    Company: Flexibilis Oy

    This document describes Flexibilis Ethernet Switch (FES). FES is an Ethernet switch Intellectual Property (IP) core targeted at programmable hardware platforms. It is also possible to integrate FES into an ASIC. FES is written in VHDL language.

    Product Name: Interlaken Controller IP Core
    Company: Flowgic Inc.

    Flowgic's Interlaken IP core is an efficient implementation of Interlaken Protocol version 1.2. Interlaken IP core is designed for flexibility, robustness, scalability and is available in 64(10-20 Gb/s), 128(20-40Gb/s), 256(40-80Gb/s) and 384(80-120Gb/s) bit datapath variants.

    Product Name: PROC Developer's Kit™
    Company: GiDEL

    GiDEL's PROC Development Kit, for ASIC/SoC/IP & System Development , is a set of building blocks designed for fast, high-productivity system development. It is a complete system solution including boards, software tools, IPs and optional daughter boards.

    Product Name: JESD204B PCS Rx IP Core
    Company: HDL design House

    The JESD204B RX Physical Coding Sublayer IP Core (HIP610) enables the reception of data via a configurable number of lanes from a Deserializer interface, while guaranteeing data alignment and frame synchronization. The HIP610 IP Core performs 8b/10b decoding, frame recovery, lane alignment, descrambling, and data demapping functions. In addition, it contains a set of test features, necessary to validate the data integrity on the serial interface. The HIP610 IP Core supports configurable number of DAC ports, each one having a width of up to 32 bits. The HIP610 IP Core offers the possibility to modify the behavior of the design based on the application requirements. This is done through the use of the design parameters, as well as via the Configuration Interface by programming the configuration registers.

    Product Name: VeloceRF design flow
    Company: Helic, Inc.

    VeloceRF is a powerful EDA tool bringing for the first time rapid, whole-chip RF modeling and simulation and paving the way to RF Intellectual Property (IP) portability and re-use.

    Product Name: 10G/1G Ethernet AVB Endpoint FPGA IP-cores for Video and Audio
    Company: intoPIX s.a.

    ntoPIX new IEEE 802.1and IEEE1722 Ethernet AVB (Audio Video Bridging) FPGA IP-cores has conceived to boost the Broadcast studios and facilities transition towards a fully networked infrastructure with a cost effective and future-proof standard that offers a maximum of reliability, quality and interoperability.

    Product Name: Broadcast HD JPEG 2000 Encoders & Decoders IP-cores
    Company: intoPIX s.a.

    The JPEG 2000 Broadcast family has been designed to respond to the various applications of the Broadcast markets. We guarantee perfect interoperability with every SD and HD standards in terms of frame rates and resolutions. Its modules provide, in a single FPGA, multi-channel operations representing a total of 240 full resolution progressive frames per second, real time.

    Product Name: Cryptographic & Securiy IP-Cores to secure your sensitive content, guarantee its
    Company: intoPIX s.a.

    Benefiting from more than 10 years of research and expertise development in cryptographic hardware and watermarking , intoPIX provides a broad range of silicon-proven security IP-Cores dedicated to Broadcast, Video Transmission, Postproduction, Archiving, Digital Cinema applications ...

    Product Name: IPX-UDP: UDP Protocol Manager
    Company: intoPIX s.a.

    The IPX-UDP receives UDP packets (including video/audio assets) on a gigabit Ethernet link. The MAC controller is based on the Tri-Mode MAC controller that is hard-coded from the Virtex-5 SXT or LXT technology. intoPIX configures the MAC controller with a specific MAC address read from a dedicated register and also sets up the external PHY chip.

    Product Name: Mathematically Lossless JPEG 2000 Encoders & Decoders IP-cores
    Company: intoPIX s.a.

    Keeping image quality intact has always been the priority in the Archiving and Storage, but also in Post-Production, Contribution and Exhibition. Nowadays, our digital era is associating this need with an increasingly pressing issue: increased resolution, frame rates and quality are making bandwidth and storage needs skyrocket. Cutting in half or even by three your storage and distribution needs while keeping every bit of information unaltered is now possible with the Mathematically Lossless processing of JPEG 2000 and the intoPIX M-Lossless family.

    Product Name: HDCP 2.0 Encryption Suite
    Company: IP Cores, Inc.

    HDCP Suite consists of hardware and software components implementing the HDCP 2.0 protocol. The hardware components are fully synchronous and available as Verilog source. The software components are available in C language.

    Product Name: SP1-12.8 Core IPsec Security Processor IP Core
    Company: IP Cores, Inc.

    Implementation of the IPsec security standard at high data rates requires the cryptographic processing acceleration. The ISP1-12.8 core is tuned for applications with the data rates of 1-6 Gbps (less for TripleDES).

    Product Name: SSL1-AXI Core
    Company: IP Cores, Inc.

    The data stream through the control interface contains processing commands. Each command consists a pointer to the descriptor in the system memory. Descriptor contains source, destination, encryption context, processing length, and status.

    Product Name: IPRO Series
    Company: KLA-Tencor Corp.

    The LMS IPRO5 mask registration metrology system is designed to ensure that pattern placement on the mask is highly accurate and repeatable, down to the 20nm half-pitch node. At the 20nm node, most critical layers will be manufactured using double patterning lithography (DPL). DPL requires two masks to create one wafer layer, either interweaving the mask patterns or using the second mask to specify cuts in the first mask’s pattern. Triple- or quadruple-mask patterning technology is also being explored.

    Product Name: Design Kit OCP / AMBA AMBA AHB / OCP bus wrappers AMBA APB / OCP bridge and wr
    Company: Magillem Design Services

    The Master and Slave AMBA AHB bus wrappers are used to connect bus independent Intellectual Properties (IPs) to an AMBA AHB bus controller. They let system designers seamlessly integrate OCP compliant IPs in their system core, enabling a practical reuse methodology.  

    Product Name: Manage your IP portfolio METADATA in a fully automated and scriptable way: Magi
    Company: Magillem Design Services

    Moving efficiently to an IP based methodology and flow requires legacy IP libraries to be captured in a technology independent format with an easy-to-use, scalable and automated process. Magillem IP Packager automatically creates an IP-XACT certified description for any VHDL, Verilog or SystemC component using a non-intrusive technology to your existing flow.

    Product Name: Multi Channel SDR SDRAM Memory Controller
    Company: Magillem Design Services

    The Memory controller is used to interface a SDR memory to an AHB, OCP or BVCI host system core, which doesn’t have an internal SDR controller. Several subsystems (N) can share the same controller. Each bus channel can be configured separately with asynchronous clocks management. This controller includes an AMBA APB port for configuration management. 

    Product Name: USB 2.0
    Company: Mentor Graphics

    The Mentor Graphics® MUSBMHDRC is a multi-point high-speed dual role USB controller with a complete USB On-The-Go (OTG) capabilities for use in point-to-point communications with other OTG devices and host computers, as well as in multi-point communications with a network of USB 2.0 peripherals and hubs. The controller complies with both the USB standard for high-speed and full-speed functions and the OTG supplement to the USB 2.0 specification.

    Product Name: 4.25 Gbps SerDes
    Company: Mixel, Inc.

    The MXL4254A is a silicon proven Quad Gigabit SerDes implemented in digital CMOS technology. Each of the four channels supports data rate up to 4.25 Gbps. It is compatible with router-backplane links, PCI Express, SATA, RapidIO, 10 Gbps Ethernet (XAUI), FibreChannel, SFI-5, SPI-5, and other communication applications.

    Product Name: MIPI/MDDI Unified PHY
    Company: Mixel, Inc.

    The Mixel MIPI/MDDI Unified Solution is compliant with the MIPI Alliance Standard for D-PHY version 1.0 and the VESA Mobile Display Digital Interface Version 1.2 specification.

    Product Name: GigaChip Interface
    Company: MoSys Inc

    The GigaChip® Interface is a reliable serial chip-to-chip transport protocol that operates over Optical Internetworking Forum (OIF) standard CEI SerDes and achieves 90% efficiency. The protocol, called the GigaChip Interface (GCI), can be scaled to 1, 2, 4 or 8 SerDes lanes as well as multiples of 8s. It targets computational and memory solutions with serial interfaces for networking equipment such as MoSys’ Bandwidth Engine® family of ICs. Operating on existing devices with 16 lanes at 15 Gbps, GCI provides enough bandwidth to support 4.5B read/write transactions and sufficient bandwidth to buffer full duplex 200GE. Doubling the pins or doubling the line rate (30Gbps) achieves full duplex 400GE. The GigaChip Interface is groundbreaking technology that has been developed specifically for serial chip-to-chip communications targeting high-speed networking applications. Founded in July 2010 by MoSys, Inc., GigaChip Interface promoters include leading companies Altera Corporation, LSI Corporation , MoSys, Inc., and Xilinx, Inc.

    Product Name: MIPI SOLUTION
    Company: Northwest Logic

    Northwest Logic provides high-performance, silicon-proven easy-to-use MIPI solutions including CSI-2, DSI, and DSI-2 IP cores. These solutions support a full range of platforms including ASICs, Structured ASICs and FPGAs. Each core is available in source code and netlist formats and is provided with a testbench and expert technical support. For additional information, visit www.nwlogic.com or contact us directly.

    Product Name: PCI Express Solution
    Company: Northwest Logic

    Northwest Logic provides high-performance, silicon-proven easy-to-use PCI Express solutions including PCI Express (4.0/3.0/2.1/1.1), DMA IP cores and drivers. These solutions support a full range of platforms including ASICs, Structured ASICs and FPGAs. Each core is available in source code and netlist formats and is provided with a testbench and expert technical support. For additional information, visit www.nwlogic.com or contact us directly.

    Product Name: ASIC IP
    Company: PLDA

    Our leading interface IP are  designed and optimized to work seamlessly on ASIC , FPGA, and ARM-enabled SoC while achieving the highest performance and smallest footprint. We engineer our IP to provide a unique out-of-the-box experience, enabling our customers to significantly reduce their design cycles.

    Product Name: FPGA IP
    Company: PLDA

    We specialize in interface IP for the PCI Express and Ethernet protocols. Our FPGA-specific interface IP products are designed and optimized to achieve the highest performance and smallest footprint on Altera and Xilinx devices. We engineer our IP to provide a unique out-of-the-box experience, enabling our customers to significantly reduce their design cycles. 

    Product Name: DO-254 CAN IP: ARINC825
    Company: SILKAN


    CAN is a message-based protocol, designed specifically for automotive applications but now also used in other areas such as avionics equipment in safety critical application. The CAN Interface module is a dedicated interface which enables data communication for ARINC825 application layer. It allows a system with an embedded CAN bus to transmit information quickly and surely. The hardware item only covers digital layers of the CAN Protocol bus architecture. The APB_ARINC825 matches major needs of any critical application and mainly those which require a DO-254 DAL-A compliance in the aerospace area.The development has been done according to the RTCA/DO-254 ED-80 guidelines.This component has been developed, verified and licensed by SILKAN.

    Key features are as follows: IP developed according to DO-254/ED-80 guidance. Compliant DAL A. Compliant with ARINC825-1 Specification. May 10, 2010. Compliant with CAN 2.0 Specification (v 2.0) published by Bosh (part A and part B). Mitigation techniques: recover from SEU (self-healing feature) and report any detected error. Support Transceiver ISO1050 from Texas Instrument and Philips TJA1040 with Standby mode.

    Product Name: DO-254 IP : ARINC429
    Company: SILKAN

    ARINC 429 is the technical standard for the avionics data bus used on most higher-end commercial and transport aircraft. It defines the physical and electrical interfaces of a two-wire data bus and a data protocol to support an aircraft's avionics local area network. The support of a Label mechanism is provided as part of the ARINC 429 specification, for various equipment types. Each aircraft will contain a number of different systems, such as flight management computers, inertial reference systems, air data computers, radar altimeters, radios, and GPS sensors. For each type of equipment, a set of standard parameters is defined, which is common across all manufacturers and models.
    Key features are as follows: Developed according to RTCA/DO-254 ED-80 guidance. Compliant DAL A. Compliant with ARINC 429 Protocol published on September 27, 2001. Compliant with AMBA 3 APB Protocol v1.0. Compliant with Mark 33 Digital Information Transfer System. Actel® Corporation property.

    Product Name: DO-254 IP : Ethernet Endpoint
    Company: SILKAN

    The MTIP_MAC1G module provides, with a single IP Core, a solution for Ethernet applications operating at 10/100 or 1Gbit. It allows a SoC to be connected to an external Ethernet Network. The hardware item only covers digital layers of the IEEE 802.3 MAC bus architecture. It supports transparent (for switching application) and full Ethernet frame handling for connected device. With its unique internal architecture the digital core is optimized for low gate count and low latency applications. For efficient power management, the core can implement the Magic Packets detection. The MTIP_MAC1G is able to recover from SEU (self-healing feature) and to report any detected errors with the help of its embedded reliability features. Detected errors are then reported to external system and to internal sub-system.The MTIP_MAC1G matches major needs of any critical application and mainly those which require a DO-254 DAL-A compliance in aerospace area.The development has been done according to the RTCA/DO-254 ED-80 guidelines. This component has been developed, verified and licensed by SILKAN.
    Key features are as follows:• Developed according to RTCA/DO-254 ED-80 guidance. Compliant DAL A • Compliant with IEEE Std 802.3-2002 Ethernet Edition, IEEE 802.1Q-1998 Edition, UNH Certified. • Simple FIFO User Interface. • Mitigation Techniques: recover from SEU (self-healing feature) and report any detected error. • Compliant with GMII / MII IEEE Std 802.3, RFC2665, RFC2863 and RFC2819 (www.ietf.org) • MoreThanIP intellectual property (www.morethanip.com)

    Product Name: DO-254 IP : PCI Express Endpoint
    Company: SILKAN

    The AXI_PCIEX1 module is a PCI Express® to AXI Bridge. It allows a system with an embedded AXI bus to be connected to an external PCI Express® Bus.The hardware item only covers digital layers of the PCI Express® bus architecture. In a typical system the main external processor is able to address the internal AXI bus used to interconnect all internal components all together. With its unique internal architecture the digital core is optimized for low gate count and low latency applications.The AXI_PCIEX1 is able to recover from SEU and to report any detected errors with the help of its embedded reliability features. Detected errors are then reported to external processor and to internal sub-system.The AXI_PCIEX1 matches major needs of any critical application and mainly those which require aDO-254 DAL-A compliance in the aerospace area.The development has been done according to the RTCA/DO-254 ED-80 guidelines.This component has been developed, verified and licensed by SILKAN.
    Key features are as follows: Developed according to RTCA/DO-254 ED-80 guidance. Compliant DAL A. Compliant with PCIe Specification 2.0 - Gen1. Compliant with AMBA AXI Protocol version 2.0. Recover from SEU (self-healing feature) and report any detected error. Compliant with PIPE version 1.0. PHY Interface for the PCI Express® Architecture

    Product Name: EC01 Pre-integrated IP™
    Company: SoC Solutions

    Embedded Controller (fast ARM7 Native Bus Architecture)

    Product Name: EC02 Pre-integrated IP™
    Company: SoC Solutions

    Embedded Controller (AMBA AHB/APB Architecture)

    Product Name: Basic IP
    Company: Socle Technology Corporation

    Basic IP covers generic components for an IC, which includes Wide-range Phase-Lock Loop (PLL) and DDR Delay-Lock Loop (DLL).

    Product Name: Complex IP
    Company: Socle Technology Corporation

    Complex IP constructs the structure of SoC and various interfaces to fill the application requirements. It includes platform core IP, DDR2 and DDR3 controller IP, USB2.0 host/device/OTG IP, Serial ATA IP, PCI express IP, and others interface IP to link up external devices.

    Product Name: Foundation IP
    Company: Socle Technology Corporation

    Foundation IP covers various cell-level components for chip implementation, which includes standard cell libraries, memory compilers, general-purpose I/O, and power management kit (PMK).

    Product Name: Processor IP
    Company: Socle Technology Corporation

    Processor IP covers various computing cores for different application SoC, which includes the cutting edge graphic core, Mali, and ARM11, and ARM9 cores. Socle licensed ARM11 cores and Mali cores under ARM IP Portfolio Program to provide comprehensive and flexible processor solutions for customer's need in high-end consumer electronics, such as MID Netbook, PMP, and others.

    Product Name: PCI Express PIPE PHY Transceiver IP
    Company: Soft Mixed Signal Corporation

    • Supports 2.5Gb/s serial data rate
    • Utilizes 8-bit or 16-bit parallel interface to transmit and receive PCI Express data
    • Full Support for Auxiliary Power (Vaux) for Energy aware systems like Multi-Port Host Controllers
    • Data and clock recovery from serial stream on the PCI Express bus
    • Supports direct disparity control for use in transmitting compliance pattern
    • 8b/10b encode/decode and error indication 
    • Receiver detection
    • De-emphasis at Transmit

    Product Name: Networking IPs
    Company: Tata Elxsi

    Tata Elxsi is actively involved in developing various connectivity components including device drivers and networking protocol stacks. These reusable components are built on Tata Elxsi Component Architecture (TCA), a robust platform independent architecture delivering high portability solution. These components are currently available on various RTOS including Embedded Linux, iTRON, VxWorks, pSOS, RoS-ES

    Product Name: Semiconductor IPs
    Company: Tata Elxsi

    Tata Elxsi is actively involved in developing various semiconductor components for ASIC/SoC design. We have developed both RTL behavioral models and hardware structure models using VHDL and Verilog. These components are robust and standards-based and hardware structure models have been verified using FPGA. These components ensure faster time to market and significant cost savings for the customer.

    Product Name: Storage IPs
    Company: Tata Elxsi

    Tata Elxsi is actively involved in developing various storage components. These components are robust and standards-based. Well-defined APIs allow these components to be incorporated into products with considerable ease. They are readily licensable to customers. These components ensure faster time to market and significant cost savings for the customer.

    Product Name: WiMAX - A wireless broadband technology
    Company: Tata Elxsi

    WiMAX delivers standards-based, high-speed voice, data and Internet connectivity in licensed spectrum for both fixed and mobile applications. Tata Elxsi Mobile WiMAX IEEE 802.16e based intellectual property (IP) and product design services offer customers the right architecture, design, integration, testing, customization and optimization services, meeting specific product development and deployment scenarios. More importantly, Tata Elxsi imparts the confidence needed to bring mobile WiMAX products to market.

    Product Name: PicoPIC16
    Company: Technology Bazaar Ltd

    The PicoPIC16 is an extremely small and high performance, technology and vendor independent 8-bit microcontroller supplied as a synthesisable IP core. It is software compatible with the industry standard PIC16xxxx family of 8-bit PIC ® microcontrollers.It is supplied as high quality synthesisable VHDL source code, with full self-checking testbench, example implementation and synthesis scripts, makefiles, documentation, maintenance and support.

    Product Name: TBPIC16
    Company: Technology Bazaar Ltd

    The TBPIC16 is an efficient and high performance, technology and vendor independent 8-bit microcontroller supplied as a synthesisable IP core. It is software compatible with the industry standard PIC16xxxx family of 8-bit PIC ® microcontrollers. It offers both firmware (object) and timing compatibility with the original devices.

    Product Name: TBPIC16S
    Company: Technology Bazaar Ltd

    The TBPIC16S is a full-featured, single clock cycle and firmware (object) compatible implementation of the industry standard PIC16xxxx family of 8-bit PIC ® microcontrollers. It offers a 4x architectural speedup versus the original devices by requiring only one clock cycle per instruction cycle. It is an efficient and high performance, technology and vendor independent 8-bit microcontroller supplied as a synthesisable IP core.

    Product Name: Cryptoprocessors IP cores: AES
    Company: Tiempo

    Tiempo AES IP core offers an unmatched performance over power consumption ratio. Operating at a wide and variable voltage range, this core enable very fast transaction for embedded applications. It is also highly secured against attacks thanks to its asynchronous implementation.

    Product Name: Cryptoprocessors IP cores: RSA & ECC
    Company: Tiempo

    TPKA (Tiempo public key accelerator), is an accelerator for RSA and ECC encryption. It implements key routines in order to perform complex ciphering algorithms within embedded systems.

    Product Name: TAM16: 16-bit Microcontroller IP core
    Company: Tiempo

    Tiempo clockless 16-bit microcontroller core – TAM16 – offers a complete instruction set with adapted software development kit for ultra-low power applications. This IP is designed in Tiempo fully asynchronous and delay insensitive technology that allows ultra-low power consumption, ultra-low noise, ultra-low EMI, as well as robustness against attacks by power analysis & fault injections.

    Product Name: Atlanta™ 100 Product Family
    Company: TranSwitch Corporation

    The Atlanta™ 100 provides best-in-class performance, at the lowest power and bill-of-materials (BOM) cost, for a range of applications that require IP packet routing, encryption, and media processing processing at rates up to 100 Mbps. These applications include secure broadband gateways, media/analog terminal adaptors (M/ATA), and Voice over IP - Digital Enhanced Cordless Telecommunications (VoIP-DECT) phones.

    Product Name: Atlanta™ 1000
    Company: TranSwitch Corporation

    The Atlanta™ 1000 communications processor delivers wire speed IEEE 802.11n WiFi performance and carrier-grade Voice-over-IP (VoIP) with the lowest power consumption and bill-of-materials (BOM) cost of processors in its class. It supports a wide range of applications including voice-enabled gateway routers for home and small office use, as well as IEEE 802.11n WiFi access points.

    Product Name: Atlanta™ 2000 Product Family
    Company: TranSwitch Corporation

    The Atlanta™ 2000 provides best-in-class performance, at the lowest power and bill-of-materials (BOM) cost, for a range of applications that require IP packet routing, encryption, and media processing at T1 to 2 Gbps data rates. These applications include secure broadband gateways, SSL/TLS and IPSec security appliances, and micro-PBX
    products.

    Product Name: Diplomat™-IP
    Company: TranSwitch Corporation

    The DiplomatTM-IP is a configurable Ethernet/ATM packet processor with an integrated MIPS control processor, comprehensive traffic manager and full switching capability for next-generation applications. The TR-101 standards-compliant device is a complete System-on-a-Chip (SoC) solution for DSLAM line cards. It is a feature-rich controller optimized to transport Ethernet and ATM traffic for next- generation IP-DSLAM equipment. The DiplomatTM-IP is particularly useful to broadband access OEMs seeking a low-cost, high-performance packet processor for high-density line cards. Its two GE ports provide flexible system connectivity with 1:1 protection, link aggregation, or daisy chain for protection/restoration, remote DSLAM and stacked DSLAM respectively.

    ASIC and IC Design : Layout Generators

    Product Name: Skipper
    Company: ICScape Inc.

    Skipper is a powerful and extremely fast chip-finishing layout platform for ultra large scale chip designs. It combines an optimized database and highly effective memory management. It can handle huge designs with 100GB GDS data and performs fast data import, management, editing and searching operations with relatively small system resources, greatly reducing update time

    Product Name: Ensigma RPU
    Company: Imagination Technologies Ltd.

    Ensigma™ Radio Processing Units (RPU) implement all of the connectivity and broadcast reception requirements of tomorrow’s complex SoCs. With more than thirty different deployable standards available for Ensigma RPUs today, they are the world’s most comprehensive baseband solution for integration into SoCs and advanced chipsets.

    Product Name: Advanced Logic 65/55nm, 45/40nm
    Company: SMIC

    SMIC is the first foundry in mainland China to offer 40nm technology. SMIC offers its 40nm Low Leakage (LL) process with three threshold voltage core devices and 1.8V, 2.5V I/O options to meet various design application requirements. The 40nm logic process combines the most advanced immersion lithography, strain engineering technique, ultra shallow junction and ultra low-k dielectric for maximum power and performance optimization.

    Product Name: Terminal
    Company: Sontheim Industrie Elektronik GmbH

    How do you conduct field bus analysis in different separated networks? Is there a way of having one single device handling all necessary diagnostics that can be carried around by service technicians if necessary – much like a PDA? Modern automation requires both high performance hardware combined with flexibility and durability in daily usage. Sontheim Industrie Elektronik GmbH has developed a highly mobile tool for exactly achieving these tasks. Mobi-CAN is a small industrial PC that has been designed for diagnostics in 11-Bit or 29-Bit identifier CAN-Bus networks.

    Product Name: 3D ACIS Modeling
    Company: Spatial Corporation

    The 3D ACIS® Modeler (ACIS) is Spatial’s prominent modeling component used in over 350 customer applications with more than 2 million seats worldwide. ACIS features an open, object-oriented C++ architecture that enables robust, 3D modeling capabilities. It is particularly well-suited for developing applications with hybrid modeling features, since it integrates wireframe, surface, and solid modeling functionality with both manifold and non-manifold topology, and a rich set of geometric operations. ACIS provides a sound base of 3D modeling functionality, plus the flexibility to meet individual application requirements. The 3D solid modeler also includes ACIS extensions for specific application needs including hidden line removal, deformable modeling, advanced covering and defeaturing.

    Product Name: HiPer DevGen
    Company: Tanner EDA

    HiPer DevGen accelerates the traditional analog layout process, saving time and increasing productivity, unlike the traditional “full custom approach” or new analog layout automation tools.  HiPer DevGen provides high performance device generation through analog layout acceleration that applies matching techniques to address common processing artifacts and produces the optimal solution for parasitics and silicon area in creating devices optimized for high yield.  HiPer DevGen can easily be applied to your standard methodology and flow; HiPer DevGen integrates with existing tools with no change in methodology, and can be easily setup in 20 minutes or less. FEATURES & BENEFITS:
    • Automatically generates common structures and primitives: Differential pairs, current mirrors, resistor dividers, MOS transistors, resistors and other basic structures.
    • Checks processing artifacts: Linear process gradients mask misalignment, implant shadowing, photolithographic invariance, current flow direction, mechanical stress/STI/LOD, antenna effect/Vt shift, WPE and more.
    • Supports general MOSET arrays and resistor arrays
    • Applies matching techniques to address common processing artifacts, parasitic and silicon area.
    • Uses manufacturing (DFM) design rules plus, DRC and LVS clean
    • Use any netlist through SDL in L-Edit
    • Works with unmodified schematics
    • Easy to setup and use; easy to use GUI with no CAD development required

    Product Name: TELA POWER OPTIMIZATION SOFTWARE
    Company: Tela Innovations

    Tela power optimization software performs a comprehensive power and timing optimization of a finished design just prior to the handoff to manufacturing. No changes to any of the design layers are made during this optimization. Instead, the software outputs an annotation layer in the handoff GDSII database that gives detailed guidance to the OPC flow used in manufacturing.

    PCB Design Tools : MCM Layout Tools

    Product Name: Fiesta® Process Tools
    Company: Comit Systems, Inc.

    Comit's Fiesta® is an integrated set of tools with a vision to painlessly transform specifications to product, by producing as much of code and documentation automatically as possible, and simultaneously setting up a compatible verification environment from the start. Designers, therefore, are free to focus on designing state machines and creating tests. Coexists with industry standard EDA tools for simulation, synthesis and layout.

    Product Name: Custom Circuit Board Manufacturing
    Company: Douglas Electronics, Inc.

    A manufacturer of printed circuit boards for over fifty years, Douglas Electronics offers a very unique service to the electronics industry. We are the only firm that both writes the PCB design software and also manufactures the boards that you design using it. With this unique combination, you can be assured that we really know how to get quality results efficiently, consistently, and at a competitive price. Hundreds of firms of all sizes, from the largest such as Motorola, Apple, and Tektronix, to many small and medium sized companies world wide, use our end-to-end solution to complete their new product designs on time and on budget.

    Product Name: MB898
    Company: IBASE Technology Inc

    • Supports Intel® Core™ 2 Duo / Pentium® D / Intel® Pentium® 4 HT / Celeron® D
      Up to 3.8GHz+, 533MHz/800MHz/1066MHz FSB
    • DDR2 DIMM x 4, max. 8GB
    • ICH8 10/100 LAN or Intel PCI Express Gigabit Ethernet
    • Integrated Intel® Q965 VGA, CRT support
    • 4 x or 6 x SATA II (RAID option), 10 x USB 2.0, 4 x COM
    • Watchdog timer, Digital I/O
    • 4 x PCI, 2 x PCI Express (x1), 1 x PCI Express (x16) slots

    Product Name: ComEth3200b
    Company: INTERFACE CONCEPT

    ComEth 3200b is a range of highly integrated Layer 2/3 Ethernet switches. The switching capability provides up to sixteen 10/100BT and eight 10/100/1000BT front Ethernet ports.

    Product Name: ComEth3300b
    Company: INTERFACE CONCEPT

    ComEth3300b is a highly integrated Layer 2+ Ethernet switch providing 24 10/100TX Ethernet ports and 6 Gigabits ports. This product, built on a single height 6U board, runs in a VME chassis that only provides 5VDC power supply.

    Product Name: ComEth5100b
    Company: INTERFACE CONCEPT

    ComEth 5100b is a range of highly integrated Layer 2+ Ethernet switches that provides twenty four 10/100TX Ethernet ports and six Gigabits ports. All these capabilities are implemented on a single slot 6U board.

    Product Name: High Power Limiters
    Company: Mercury Systems, Inc.

    Mercury Systems High Power Products designs and manufactures standard and application specific Limiters from 0.5 to 18 GHz and power levels up to 2 kW peak, and broadband high power limiters from 2 GHz to 20 GHz. These are robust PIN diode limiters with proven field reliability.

    Product Name: DIGITAL
    Company: OLIMEX Ltd.

    DIGITAL is high sophisticated digital motor speed controller for food processors.
    The board have six LEDs for speed indication, four LEDs for accessoary recognition, one LED for unclosed accesory indication and five button keyboard

    Product Name: Home digital electricity meter
    Company: OLIMEX Ltd.

    HEM is electronic electricity meter with alpha numeric LCD display and the following
    features:
     - constatntly measures, monitoring and archive the electricity consumation
     - three time zones for electricity consumption monitoring
     - displays: voltage, current, cos(f), active power, reactive power

    Product Name: Signal Integrity modeling
    Company: PCB Experts, LLC

    Today's high speed technologies require much more planning than before because of the very fast switching speeds and data rates of today's silicon devices. There are very fast memory busses, Serial ATA, Fibre channel, USB and much much more. Before a product is even prototyped, the designer must consider how the trace spacing, width, length, cross talk and even the PCB materiel will impact the signal integrity of the design. Failure to consider this is often the cause of lost schedules and marketing windows because of product re-spins.

    Product Name: LAVIS
    Company: TOOL Corp.

    Versatile layout visualization platform supporting fast large data display and multiple file formats.The advent of sub-wavelength process has resulted in growing tendency of ever larger LSI design data and more complex design flow.

    Memory : Memory Upgrade

    Product Name: Mass Storage Boards
    Company: Acromag

    Acromag's line of Xembedded mass storage boards provide a variety of high-performance embedded computing solutions for defense, aerospace, scientific, transportation, and manufacturing applications. These storage modules are available in VME, VPX, and CompactPCI platforms with a range of SATA/SAS, RAID, DVD, and CompactFlash configurations to satsify your unique application requirements.

    Product Name: Serial EEPROM
    Company: Atmel Corporation

    Atmel is a leading supplier of Serial EEPROM devices and has shipped over 12 billion devices in the past decade. Because of the ability to alter single bytes of data, Serial EEPROM devices are used to store personal preference and configuration data in a wide spectrum of consumer, automotive, telecommunication, medical, industrial, and PC applications. Atmel offers Serial EEPROM devices in I2C, Microwire and SPI compatible protocols. The devices come in a number of industry-standard package types including space saving DFN, VFBGA, SOT23, and WLCSP packages. Atmel Serial EEPROM devices feature low pin count and are optimized for use in automotive and industrial temperature applications where low-power and low-voltage operation are essential.

    Product Name: Beyond DDR2/DDR SDRAM Memory Controlle
    Company: Beyond Semiconductor

    Increasing SoC/ASIC devices' complexity also demands increase in memory bandwidth. Single data rate devices are being replaced by double (and more) data rate devices in applications where memory bandwidth is essential. The development trend in DDR2, DDR, SDRAM devices is biased towards higher clock frequencies and higher latencies. Beyond DDR2/DDR SDRAM Memory Controller IP Core was developed with this trend in mind. It interleaves accesses when possible, maximizing utilization of memory control and data buses. This reduces overall memory access latencies while utilizing its higher bandwidth capabilities.

    Product Name: Beyond SDRAM/FLASH/SRAM Memory Controller
    Company: Beyond Semiconductor

    Almost every SoC produced today uses some kind of external memory, because large embedded memories can be costly in terms of price, overall die size and power consumption. Beyond SDRAM/FLASH/SRAM Memory Controller IP Core provides access to external asynchronous static and synchronous dynamic memory devices for SoC designs using AHB or WISHBONE SoC interconnect bus as internal bus. A wide variety of different memory device organizations and speeds are supported. The Beyond SDRAM/FLASH/SRAM Memory Controller IP Core also uses a lot of optional, pre-synthesis parameters, which makes it configurable for use in a wide variety of applications.

    Product Name: Storage
    Company: Broadcom Limited (formerly Avago Technologies)

    Avago is a leading supplier of 2G,4G,8G and 10G storage transceiver solutions. Avago's Fibre Channel transceiver and ESCON products are offered in SC duplex, MT-RJ, SFF LC and SFP LC platforms for computing, switching, and host bus adapter applications in storage area networks.

    Product Name: Embedded Memory Solutions
    Company: ChipStart LLC

    ChipStart is your one-stop for embedded memory solutions, from our revolutionary Algorithmic Memory to embedded SRAM's. Silicon proven and qualified memories in many standard processes as well as macros for less common fabs and process nodes.

    Product Name: CX92125
    Company: Conexant Systems Inc

    The CX92125 (DC1250) is a comprehensive solution for low-end to mid-range color inkjet and laser multi-function printers (MFPs). The highly integrated SoC features very high-speed hardware image processing accelerators, system I/O and powerful 32-bit microprocessor core with a memory management unit a vector floating point processor.

    Product Name: CX92162
    Company: Conexant Systems Inc

    The CX92162 is a highly integrated multi-function printer controller for mid-range tandem color laser MFPs featuring a powerful ARM926EJ-S microprocessor core with MMU, DDR3 SDRAM support, memory card controller, LCD controller, touchscreen support, Ethernet MAC, boots from serial and NAND Flash, and has an enhanced image processing pipeline that improves the performance as well as the image quality. A complete hardware and software development kit is offered to simplify product-development efforts and allows designers to deliver product to market more quickly.

    Product Name: DSDRAM
    Company: Digital Core Design

    The DSDRAM is an IP Core of a configurable SDRAM controller. Naturally, it is fully compliant to JEDEC PC100/133 standards. Our infallible soft Core can operate with any SDRAM memory device, in terms of size and required timing parameters. All access timing parameters - such as CAS latency, refresh interval etc. - can be easily programmed. Thanks to this useful feature, the DSDRAM can support different speed grades of SDRAM devices and different operating frequencies.

    Product Name: bRAMs / Distributed RAMs
    Company: eASIC Corporation

    The eCores contain custom decode logic that together with the eCell LUTs, can be configured into a dual-port memory. Any rectangular arrangement of eCell™ within the eCore™ can be combined to form an eRAM. Dedicated software tools assist the designer in configuring both a single block of memory and multiple blocks of eRAM memories by connecting the eRAM memories together with additional logic.

    Product Name: JEM_DIMM/SODIMM Module
    Company: Flynn Systems Corp.

    StarTest (JTAG.TECT), our distributor for Israel, Russia and former USSR, developed a wide array of memory modules for use in JTAG test.

    Product Name: FS2800 DDR Detective
    Company: FuturePlus® Systems

    The DDR Detective® is the most comprehensive DDR Memory compliance, validation and performance monitoring tool on the market.  It provides: ·         Real Time all the time JEDEC compliance violation detection ·         Traditional deep transaction trace capture ·         Thousands of Real Time all the time Performance counters ·         System characterization using real time counters not traditional trace, stop, compute method which misses valuable bus traffic ·         Passive, physically small probing supports cell phones to servers

    Product Name: ACC-5595
    Company: GE Fanuc Embedded Systems, Inc.

    The ACC-5595  is a managed hub designed to operate with the GE Intelligent Platforms 5565 family of   Reflective Memory real-time network products. The Reflective Memory hub can automatically bypass ports when it detects a loss of signal or the loss of valid synchronization patterns, allowing the other    nodes in the network to remain operational.

    Product Name: H5GQ1H24BFR
    Company: Hynix Semiconductor Inc.

    The GDDR5 SGRAM is a high speed dynamic random access memory designed for applications requiring high bandwidth. GDDR5 devices contain the following number of bits:1Gb has 1,073,741,824 bits and sixteen banksThe GDDR5 SGRAM uses a 8n prefetch architecture and DDR interface to achieve high speed operation.   The device can be configured to operate in x32 mode or x16 (clamshell) mode. The mode is detected during device initialization.

    Product Name: H5TC1G83EFR
    Company: Hynix Semiconductor Inc.

    The H5TC1G83EFR-xxA(I) and H5TC1G63EFR-xxA(I) are a 1Gb low power Double Data Rate III (DDR3L) Synchronous DRAM, ideally suited for the main memory applications which requires large memory density, high bandwidth and low power operation at 1.35V. SK Hynix DDR3L SDRAM provides backward compatibility with the 1.5V DDR3 based environment without any changes. (Please refer to the SPD information for details.)

    Product Name: H5TC2G83DFR
    Company: Hynix Semiconductor Inc.

    The H5TC2G83DFR-xxA(I) and H5TC2G63DFR-xxA(I) are a 2Gb low power Double Data Rate III (DDR3L) Synchronous DRAM, ideally suited for the main memory applications which requires large memory density, high bandwidth and low power operation at 1.35V. SK Hynix DDR3L SDRAM provides backward compatibility with the 1.5V DDR3 based environment without any changes. (Please refer to the SPD information for details.)

    Product Name: A2 - Serial ATA Solid State Disk (SSD) controller
    Company: Hyperstone GmbH

    The Hyperstone A2 family of Flash Memory Controllers together with provided application and flash specific firmware offers an easy-to-use turnkey platform for high endurance robust flash disks of various form factors and interface standards.

    Product Name: F3 - Flash Memory Controller
    Company: Hyperstone GmbH

    The Hyperstone F3 family of Flash Memory Controllers together with provided application and flash specific firmware offers an easy-to-use turnkey platform for high endurance flash disks of various form factors and interface standards.  

    Product Name: F4 - Flash Memory Controller
    Company: Hyperstone GmbH

    The Hyperstone F4 family of Flash Memory Controllers together with provided application and flash specific firmware offers an easy-to-use turnkey platform for high endurance flash disks of various form factors and interface standards.

    Product Name: S8 - Flash Memory Controller
    Company: Hyperstone GmbH

    The Hyperstone S8 family of Flash Memory Controllers together with provided application and Flash specific firmware offers an easy-to-use turnkey platform for industrial high endurance robust Flash Memory Cards or modules compatible to host systems with (e)SD or (e)MMC interfaces.

    Product Name: JMF667
    Company: JMicron Technology Corp.

    JMF667 is a single chip, supports external DDR3 DRAM, SATA III to NAND flash interface. It is native design to provide higher bandwidth for flash memory access. JMF667 can support the maximum read and write speed to drive the limit of flash memory. JMF667 has the best supporting to the latest NAND flash memory, including Toshiba 32nm/24nm HBL/ABL, 19nm Flash, Intel/Micron 20 nm and 25 nm. It also provides the embedded hardware error correction code (ECC), wear leveling, and bad block management technology in this chip. In order to resolve compatibility issue, JMF667 provides the on line firmware upgrade ability.

    Product Name: Gusto-2™ Ultra-Low Power NVM IP for Code Storage
    Company: Kilopass Technology, Inc.

    Gusto-2™ addresses the low power and small form factor requirements as well as the security needs for tomorrow’s applications from mobile wallet to low energy wireless SoC designs. These SoC designs will be energy frugal, fast, and sufficiently small to fit into space-constrained consumer devices.  

    Product Name: XPM Register
    Company: Kilopass Technology, Inc.

    Kilopass’ memory register IP is a non-volatile memory (NVM) that is a programmable register with 16 to 64 outputs. Each output represents an individual register which can be independently set or reset until the register is programmed.  It can be programmed at wafer sort, in package, or in system. It is available from 180nm to 65nm at TSMC, Samsung, SMIC, Global Foundry, Dongbu, Tower, and GSMC. Capacity ranges from 16b to 64b, option to build larger capacities by cascading multiple instances.

    Product Name: XPM™ Embedded Non‐Volatile Memory (NVM)
    Company: Kilopass Technology, Inc.

    Kilopass XPM™ embedded non-volatile memory (NVM) is built using standard, commercially available CMOS logic process technologies and is silicon proven to deliver high density, high performance, and highly reliable electrically field-programmable solutions at a low cost. Over 100 customers have integrated XPM™ embedded NVM IP in over 300 designs from 180nm to 28nm. Applications range from 8Kb for security keys to multiple instances of 1Mb for program code storage. Many of the designs up to 65nm are in high volume production starting as early as 2003.

    Product Name: MBISTArchitect
    Company: Mentor Graphics

    Embedded memory continues to represent a larger portion of today’s challenging designs. Because of this trend, and the nature of a memory’s small geometries, implementing a sound memory testing strategy is one of the most significant design decisions.

    Product Name: µC/OS-III
    Company: Micriµm Technologies Corporation

    µC/OS-III is a highly portable, ROMable, scalable, preemptive, real-time, deterministic, multitasking kernel for microprocessors, microcontrollers and DSPs.

    Product Name: μC/FS
    Company: Micriµm Technologies Corporation

    µC/FS can access multiple storage media through a clean, simple API. It supports the FAT file system for interoperability with all major operating systems. An optional journaling component provides fail-safe operation, while maintaining FAT compatibility.

    Product Name: 10M/10G Anyspeed MAC
    Company: MorethanIP

    Low-Latency Anyspeed Ethernet MAC Core designed to comply with the IEEE802.3 specifications for 10/100/1000Mbps and 10Gbps meeting the requirements for both WAN / MAN and LAN connectivity. Its flexible rate design also allows for industry standard 2.5Gbps operation.

    Product Name: MEMORY INTERFACE SOLUTION
    Company: Northwest Logic

    Northwest Logic provides high-performance, silicon-proven easy-to-use Memory Interface solutions including HBM2, DDR4/3, LPDDR4/3, and MRAM IP cores. These solutions support a full range of platforms including ASICs, Structured ASICs and FPGAs. Each core is available in source code and netlist formats and is provided with a testbench and expert technical support. For additional information, visit www.nwlogic.com or contact us directly.

    Product Name: AVR
    Company: OLIMEX Ltd.

    The AVR is an 8-bit RISC single-chip microcontroller which was developed by Atmel in 1996. The AVR was one of the first microcontroller families to use the on-chip flash memory for program storage, as opposed to the one-time programmable ROM, EPROM, or EEPROM used by other microcontrollers at the time. Recently a lot of enthusiasts become acquainted with the AVR microcontrollers thanks to the Arduino project.

    Product Name: Memory Request Optimizer
    Company: Performance-IP, LLC

    The Memory Request Optimizer™ will reduce the read latency of your memory sub-system, allowing you to recover lost system performance. Based on Performance-IP's patent-pending Memory Tracker Technology™, which allows the Memory Request Optimizer™ to operate at greater levels of efficiency. This greater efficiency produces large reductions in latency, which means greater reductions in power or larger increases in performance. The Memory Request Optimizer™ can also reduce the number of reads that reach the memory sub-system. Further improving the performance/watt of your design. The Memory Request Optimizer™ is completely programmable, allowing customer's to dynamically tune the desired request optimization to best match their applications performance and power requirements. Support for single or multiple clients allows the Memory Request Optimizer™ to reside at any level of a memory sub-system, making it ideally suited for today's multi-core or multi-client SoC designs.

    Product Name: PX1500-4
    Company: Signatec, Inc.

    The PX1500-4 is a four channel waveform capture board that can acquire up to 1500 MSPS on each channel or up to 3000 MSPS for dual channel operation when ADC data is interleaved. The PX1500-4 can be set up to use either a transformer coupled front end or an amplifier connection. The transformer connection can only be set for AC coupled operation and has a frequency capture range of 5 MHz to 2 GHz. The amplifier can be set for either AC or DC coupled operation with a frequency range of up to 1 GHz.

    Product Name: R5WT-979 Series
    Company: Taiwan Commate Computer Inc.(COMMELL)

    COMMELL's R5WT-979 is the value industrial 5U 19" rackmount with 10.4” TFT LCD Intel Pentium 4 LGA 775 level industrial workstation platform. Based on Intel socket 775 Pentium 4 / Celeron architecture and PICMG industrial standard, R4WT-979 features the Intel's latest Pentium 4 / Celeron LGA 775 CPU @ 800/533 MHz FSB and DDR II memory solution, integrated with Intel 915GV built-in Intel GMA 900, 3 x Giga LAN, AC97 3D audio and high speed USB 2.0, M-systems DiskOnChip embedded flash disk interfaces and high expansibility of multiple PCI/ISA expansive slots with optional configuration.

    Product Name: R.S.T. Pro 3 PCI-Express
    Company: Ultra-X Benelux B.V

    Introducing the world’s first and only PCI Express RAM memory diagnostic and validation tool, R.S.T. PRO PCI Express (R.S.T. Pro PCIe). R.S.T. Pro PCI Express is the definitive memory diagnostic and validation tool designed for the rigorous testing needs of desktop & server memory manufacturers, system builders, design engineers, and service professionals.

    Product Name: DDR SDRAM
    Company: Virtium Technology, Inc.

    DDR SDRAM also known as DDR1 SDRAM became a JEDEC standard in 2000 for industrial OEM's and was the successor technology to SDRAM. It was followed by the subsequent generations of DDR2 and DDR3. DDR SDRAM provides a lower voltage level and higher data transfer compared to SDRAM. The voltage level is reduced from 3.30 volts down to 2.50 volts and the memory module provides a data transfer on both transitions of the clock signal. This produces more data transfers for a given clock speed, but with the drawback of increased latency. The DDR Generation was the first to feature Very Low Profile Registered DIMMs (VLP RDIMM) with reduced height to support space-constrained applications.

    Product Name: DDR2 SDRAM
    Company: Virtium Technology, Inc.

    The memory clock speed of the industrial DDR2 SDRAM was reduced by half compared to the DDR1 generation for a given bus speed. This change resulted in higher bus speed for an equivalent memory clock rate at the cost of increased latency. The operating voltage was reduced from 2.5 Volts to 1.8 volts to reduce power consumption and facilitate the use of smaller semiconductor fabrication processes. The DDR2 generation also saw the introduction of additional form factors such as the 214 pin MicroDIMM with ECC, the 244 pin Mini-DIMM, and features such the Fully Buffered DIMM (FB-DIMM), Low profile DIMM and ECC SODIMM.

    Product Name: Flash Storage Solutions
    Company: Virtium Technology, Inc.

    The Virtium TuffDisk Compact Flash (CF) VCF Series is an industrial temperature -40°C - +85°C Flash storage solution that provides rugged storage solutions for single board computers and industrial systems. It is designed to solve a broad range of OEM concerns from compatibility, booting and power cycling issues to speed, cost and long-term supply as well as wear leveling support. The TuffDisk industrial CF VCF product family is available in a broad range of densities from 128 MB to 16 GB and features speeds up to 80 MB/s read and 75 MB/s write.

    Product Name: SODIMM / Mini-DIMM
    Company: Virtium Technology, Inc.

    Virtium?s has a proven history of small form factor (SFF) memory module product development, which is demonstrated with our long list of first-to-market SO-DIMM and Mini-DIMM new technology form factors. Virtium was the first company to introduce ECC SODIMM products and SORDIMM in 2006. In 2010, Virtium introduced the first 4GB DDR3 ECC UNBUFFERED MiniDIMM in advanced Ultra-Low Profile (ULP) 17.78mm (.700 inch) form factor. The company was also first to market with ECC SODIMM, SORDIMM and VLP DIMM products.

    Product Name: Stacked Chips/TwinRAM
    Company: Virtium Technology, Inc.

    Utilizing our sophisticated BGA and TSOP chip stacking technologies as well as flash stacked components, Virtium leverages the advantages of lower cost components and quicker integration times while maintaining the functionality of lower volume specialty DRAM configurations. Virtium reduces the cost of sourcing hard to find configurations and densities by using high-volume products in stacked configurations to reduce the height of Low Profile DIMM, VLP DIMM and VLP SODIMM applications. The use of mainstream DRAM enables Virtium to offer its customers shorter lead times when supply is tight or on allocation.

    Product Name: 563xx-System
    Company: X-SPEX GmbH

    Flexible DSP-System based on the DSP56321 by Motorola/Freescale incorporating FlashROM, SDRAM and various external interfaces.

    Product Name: BF53x-System
    Company: X-SPEX GmbH

    Flexible DSP-System based on the BlackFin family by Analog Devices incorporating FlashROM, SDRAM and various external interfaces.

    Memory : OEM Memory

    Product Name: Schematic Capture for OEM Applications
    Company: Capilano Computing System

    If you produce circuit or network analysis, layout or simulation software and  need a graphical diagramming tool as a front end, consider DesignWorks  Professional.  DesignWorks has numerous customization features that allow the  package to be configured for your application, often without writing a single line of program code! 

    Product Name: FLASHit OEM-Version
    Company: hse-electronics GmbH

    The OEM-Version of FLASHit is a “two file” version consist of FLASHit (< 1 MB) and your HEX-File. It is specially suitable to pass it to your customers via Internet. With this tool your customers will be able to update software of their targets comfortably. This version can be copied as often as you want.

    Product Name: HY5DU561622CT
    Company: Hynix Semiconductor Inc.

    The Hynix HY5DU561622CT is a 268,435,456-bit CMOS Double Data Rate(DDR) Synchronous DRAM, ideally suited for the point-to-point applications which requires high bandwidth.

    Product Name: HY5DU561622CTP
    Company: Hynix Semiconductor Inc.

    The Hynix HY5DU561622CTP is a 268,435,456-bit CMOS Double Data Rate(DDR) Synchronous DRAM, ideally suited for the point-to-point applications which requires high bandwidth.

    Product Name: HY5PS561621BFP
    Company: Hynix Semiconductor Inc.

    Read and write accesses to the DDR2 SDRAM are burst oriented; accesses start at a selected location and continue for a burst length of four or eight in a programmed sequence. Accesses begin with the registration of an Active command, which is then followed by a Read or Write command.

    Product Name: FLASH MEMORY CONTROLLER
    Company: Hyperstone GmbH

    Hyperstone's controllers are among the most powerful single-chip controllers on the market for designing Flash Memory Cards. The required external component count is reduced to a bare minimum of few passive components enabling the design of very low-cost but high-performance flash memory cards.

    Product Name: Bandwidth Engine ICs
    Company: MoSys Inc

    MoSys® Bandwidth Engine® Family of ICs is a memory solution with serial interfaces and intelligent offload for high performance networking equipment. Bandwidth Engine is optimized for memory transaction performance, capable of up to 4.5 billion transactions per second, up to 400 Gbps effective data t throughput, and up to 12 billion operations per second when utilizing the counting and metering fixed macro operations. The device architecture relies on three elements:
    • A 576Mb multi-banked and multi-partitioned memory array built with high density 1T-SRAM® memory core and delivering the highest single chip transaction rate of any memory device in production today.
    • Onboard ALUs for the acceleration of common statistics and metering functions for networking applications.
    • Sixteen lanes of low latency SerDes, compatible with CEI-11G, supporting full duplex, concurrent operations with a packetized, 90% efficient GigaChip® Interface transport protocol.

    Product Name: ZF FailSafe BIOS
    Company: ZF Micro Solutions, Inc.

    Every ZFx86 System-on-a-Chip includes a fully paid run time license for the ZF FailSafe BIOS based on the Phoenix 4.x PC BIOS. Our FailSafe BIOS takes the industry leading Phoenix BIOS and extends it for the ultimate in embedded BIOS features.

    Product Name: ZFx86 Easy Embedded PC™ Reference Design
    Company: ZF Micro Solutions, Inc.

    The EEPC™ Open Source Embedded PC Reference Design is a network and video-ready, full-function evaluation system. The board features the ZFx86 PC-on-a-Chip, a Silicon Motion SM712 display controller and RealTek 10/100Base-T Ethernet controller to create an evaluation environment that allows the OEM designer to immediately begin testing the ZFx86 processor with proprietary hardware and software.

    Product Name: ZFx86™ 486 PC-in-a-Chip
    Company: ZF Micro Solutions, Inc.

    Designed expressly for embedded applications. The ZFx86 PC-compatible microcontroller was designed from the ground up with the industry’s most comprehensive set of traditional X86 PC functionality. Unique proprietary FailSafe® System features resolve the most critical issues that can stand in the way of creating successful and reliable OEM products.

    PCB Design Tools : PCB Design and Analysis

    Product Name: CircuitCREATOR
    Company: Advanced Microcomputer Systems Inc

    CircuitCREATOR Tutor Standard and CircuitCREATOR Tutor Professional and Circuit Creator Tutor PlatinumCoursewares are the first and only electronic CAD educational programs available to high schools,community colleges, vocational/technical centers,colleges and universities that has the following features: 
    • User Friendly Software-with quickest learning curve
    • Comprehensive Student Workbook
    • Very Low Cost to Schools and Students

    Product Name: Announced SoC devices for test handler "M4871"
    Company: Advantest Technology Solutions Corp.

    Provides test solutions efficient and flexible in Advanced SoC device temperature control technology and handling precision of industry-leading Advantest Corporation (Head Office: Chiyoda-ku, Tokyo, President: Haruo Matsuno) today announced new product of SoC (System-on-Chip) device for test handler "M4871". Be corrected with high precision image processing contact the positional accuracy of the device under test to the "double-sided visual alignment" function, which allows high accuracy to the device under test, the application of high temperature response This product, "Active Thermal Control" , and such as the ability to monitor in real time the test situation through the network have been added to the new. In addition, it provides a test solution for high-quality, high-efficiency for Advanced SoC devices by using in conjunction with the device interface and test our systems, miniaturization and high functionality proceeds.

    Product Name: Altium Designer
    Company: Altium Limited

    Altium Designer is the world's first and only unified electronic product development system that allows engineers to take a design from concept to completion within a single application. Altium Designer removes the barriers imposed by disparate design flows, unifying the different design disciplines involved in electronics product development by bringing together hardware, and device and vendor independent software and programmable hardware development within a unified environment, allowing all aspects of an electronic product to be designed and managed within a singular system.

    Product Name: Aluminum Printed Circuit Boards
    Company: Amitron Corp.

    Amitron has been producing Aluminum Printed Circuit Boards (also called Metal base PCBs) for over a decade. Although originally envisioned for use in the power-supply industry these substrates are now most widely used in High Brightness LED products. There are many names for these products; Aluminum clad, aluminum base, Metal clad(MCPCB), Insulated Metal Substrate(IMS or IMPCB), Thermally conductive PCBs, etc… but they all mean the same thing. A thin layer of thermally conductive but electrically insulating dielectric is laminated between a metal base and a copper foil. The copper foil is etched into the desired circuit pattern and the metal base draws heat away from this circuit through the thin dielectric.

    Product Name: Multilayer printed circuit boards
    Company: Amitron Corp.

    Multilayer printed circuit boards (PCBs) represented the next major evolution in fabrication technology. From the base platform of double sided plated thru came a very sophisticated and complex methodology that would again allow circuit board designers a dynamic range of interconnects and applications.

    Product Name: Single sided PCB
    Company: Amitron Corp.

    Single sided PCB’S have been around since the late 1950s and still dominate the world market in sheer piece volume.  Single-sided printed circuit boards are easily designed and quickly manufactured. They serve as the most cost effective platform in the industry.

    Product Name: Freescale Semiconductor
    Company: Ammos Technologies Pvt LTD

    Freescale Semiconductor, provides CodeWarrior Development Studio A complete integrated development environment for hardware bring-up through programming applications.

    Product Name: RealView®
    Company: Ammos Technologies Pvt LTD

    RealView® Developer Suite is the latest in the well established ARM product family of fully integrated software solutions. RealView Developer Suite contains leading edge tools for creating and debugging, efficient software to run on any processors based on an ARM architecture. In line with our policy of long term customer support, RealView Developer Suite ships with components from previous family members such as ARM Developer SuiteTM (ADS).

    Product Name: Backplane System Solutions
    Company: Amphenol TCS

    PCB design, materials, choice of backplane connector and other enabling technologies play a crucial role in determining the success of any system. Amphenol’s experienced applications engineers can assist in the early stages of your backplane assembly design and, along with prototype and quick turn services, speed you to market with the right product the first time. With large format manufacturing capabilities, thru-hole soldering and reliable, repeatable press-fit assembly, no one is better at putting the pieces together than Amphenol TCS.

    Product Name: High-Speed, High-Density Connectors
    Company: Amphenol TCS

    Amphenol's broad range of connector product families enable design engineers to achieve their performance targets. Whether the priority is a proven cost-optimized solution or the best performing connector on the market, Amphenol TCS is your source for high-speed and high-density connectors

    Product Name: AIEC9 SoC Development Board (AIEC9DVB)
    Company: Automotive Integrated Electronics Corporation

    The AIEC9 System on Chip (SoC) Development Board (AIEC9DVB) provides an environment for developing production intent, custom SoCs that are based on the AIEC9 microprocessor (mP) core. Typically, an SoC contains a mP core, associated memory, digital peripherals, and an analog to digital converter. The AIEC9DVB provides provisions for all of these functions such that the SoC can be completely prototyped before committing to silicon.

    Product Name: PCB Manufacturing Capabilities
    Company: Bare Board Group, Inc.

    At Bare Board Group, the need of each individual customer is important to us. We strive to provide our clientele with an expanded catalog of manufacturing capabilities in order to fit the wide variety of quality printed circuit boards (PCBs) they require. Below you will find a listing of Bare Board Group's standard manufacturing capabilities. If you require something that is not listed, please contact BBG to give us the opportunity to accommodate YOUR individual need.

    Product Name: Virtex-4 LX25 Development Board
    Company: BitMapper Integration Technologies Pvt. Ltd.

    The VIRTEX-4 Development Board comes with a XC4VLX25-10FF668C device on board. The Board has Various PC interfaces like VGA, PS/2 Keyboard, PS/2 Mouse, and RS232, RS422, USB, and Ethernet make this board a complete laboratory in itself.

    Product Name: Allegro Design Entry HDL
    Company: Cadence Design Systems, Inc.

    Cadence® Allegro® Design Entry HDL is an enterprise-enabled design creation solution that allows schematic designers to capture complex designs quickly and efficiently. It provides advanced productivity features such as reuse of previous schematic designs as blocks or sheets—partially or completely.

    Product Name: Allegro® AMS Simulator
    Company: Cadence Design Systems, Inc.

    Cadence® Allegro® AMS Simulator includes PSpice® technology at the core, providing fast and accurate simulations. This Advanced Analysis package includes utilities for sensitivity analysis, goal-based multi-parameter optimization, component stress and reliability analysis, and Monte Carlo analysis for yield estimation. The parametric plotter analyzes interdependence among parameters and converts simulation data into meaningful results.

    Product Name: Allegro® Design Entry CIS
    Company: Cadence Design Systems, Inc.

    The embedded library management in Cadence® Allegro® Design Entry CIS enables teams to share and reuse centralized parts information, reducing the effort spent researching and manually entering parts and block design data. Removing the need for multiple users to enter parts not only eliminates redundancy, but it also reduces divergence and errors in the design.

    Product Name: Allegro® Design Workbench
    Company: Cadence Design Systems, Inc.

    Valuable in workgroup environments, Cadence® Allegro® Design Workbench significantly improves productivity while reducing costly mistakes that are often introduced due to a lack of an unified environment. Common access to component information and preferred parts libraries speeds component selection and eliminates design errors due to flawed, obsolete, or non-preferred parts.

    Product Name: Allegro® Package Designer
    Company: Cadence Design Systems, Inc.

    Cadence® Allegro® Package Designer integrates with First Encounter® Silicon Virtual Prototyping to deliver chip-level I/O feasibility planning capabilities in an industry-proven co-design methodology. Data integration with First Encounter technology provides mask accuracy in the RDL routing and improves I/O padring optimization, substrate interconnect design, extraction, modeling, and signal integrity analysis. The final design output provides automatic system-level handoffs for PCB design.

    Product Name: Allegro® Package SI
    Company: Cadence Design Systems, Inc.

    Cadence® Allegro® Package SI performs direct read/write to the design database to achieve accurate prototyping without time-consuming setup, and directly incorporates the results. By providing key indicators early in the design process, it helps engineers make difficult tradeoff decisions. A graphical topology simulator/editor allows engineers to compare different electrical routing strategies, optimize design rules, and develop S-Parameter models.

    Product Name: Allegro® PCB SI
    Company: Cadence Design Systems, Inc.

    Cadence® Allegro® PCB SI GXL provides a virtual prototyping environment for designs with signals operating in the multi-gigahertz (MGH) frequency range. It offers a completely integrated signal design and analysis solution built on top of the proven Allegro PCB SI environment.

    Product Name: Allegro® System Architect
    Company: Cadence Design Systems, Inc.

    Cadence® Allegro® System Architect’s spreadsheet editor performs especially well in designs involving large pin-count devices, multiple wide buses, FPGAs, and high pin-count differential connectors. Multi-style design entry allows designers to significantly accelerate the process by matching the method of capture to the characteristics of the design intent.

    Product Name: Cadence OrCAD Capture / Capture CIS
    Company: Cadence Design Systems, Inc.

    Easy-to-use and powerful, Cadence® OrCAD® Capture is the most widely used schematic design solution, supporting both flat and hierarchal designs from the simplest to the most complex. Seamless bi-directional integration with OrCAD PCB Editor enables data synchronization and cross-probing/placing between the schematic and the board design. OrCAD Capture allows designers to backannotate layout changes, make gate/pin swaps, and change component names or values from board design to schematic using the feedback process. It also comes with a large library of schematic symbols and can export netlists in a wide variety of formats.

    Product Name: Cadence OrCAD PCB Designer
    Company: Cadence Design Systems, Inc.

    Cadence® OrCAD® PCB Designer contains a fully integrated design flow that includes a constraint manager, design capture technology, component tools, a PCB editor, an auto/interactive router, and interfaces for manufacturing and mechanical CAD.

    Product Name: PCB Assembly
    Company: Contract Electronics Manufacturing Services: Kingfield Electronics UK

    Through hole, or conventional contract PCB assembly represents a key service offering within our range of contract electronic manufacturing services. This capability can be utilised at all levels from the initial production of very low volume, rapid prototype products, through to the ongoing manufacture of complex, multi-technology PCB assemblies. We are capable of producing both RoHS compliant and legacy, leaded product both utilising wave soldering and where necessary hand assembly. Volume conventional PCB assembly services are provided by our partner company in South East Asia.

    Product Name: Surface Mount PCB Assembly
    Company: Contract Electronics Manufacturing Services: Kingfield Electronics UK

    Our Surface Mount PCB Assembly capability is a key service offering and supports much of our manufacturing activity. Our in-house facilities permit the manufacture of both leaded and lead-free ( RoHS compliant ) product ( the former is still a significant requirement given the exclusion status of many of our customers ), and we have the ability to place all types of component package including BGA devices. Our processes are heavily automated and we have invested heavily in our manufacturing infrastructure.

    Product Name: PCB
    Company: DELTATEC

    We have an experienced team devoted to PCB layout, using Mentor Graphics Expedition PCB Pinnacle & Ascent CAD systems (formerly Veribest).

    Product Name: Dialogic® DSI SS7LDH4 Network Interface Board
    Company: Dialogic

    The Dialogic® DSI SS7LDH4 Network Interface Board offers SS7 network connectivity to service nodes handling low volumes of signaling traffic (for example, 200 calls per second or less), and its half-sized PCI Express form factor helps reduce deployment costs. These characteristics, in addition to the ability to choose a bundle of circuit protocols in capacities suitable for small configurations, can help businesses meet the price points needed for success in a highly competitive segment of the market.

    Product Name: Breadboards
    Company: Douglas Electronics, Inc.

    Douglas Electronics has been a supplier of a broad line of high quality "breadboard" PCBs and other prototyping supplies for nearly forty years. These prototyping products, which are compatible with many popular computers, bus standards, and card cages, allow you to build working models of your designs quickly and modify them as needed before committing to a custom PCB design. We offer many different styles and form factors, and we maintain a large inventory that lets us ship product usually the same day the order is received.

    Product Name: DesignWorks Schematic Capture
    Company: Douglas Electronics, Inc.

    An excellent schematic capture tool for the Macintosh or Windows, DesignWorks does much more than just create a clean schematic drawing of your circuit design. Beneath every wire and every device symbol lies a comprehensive database that is built invisibly and automatically while you just point, click, and draw.

    Product Name: Douglas CAD/CAM Professional
    Company: Douglas Electronics, Inc.

    Douglas CAD/CAM is a family of products for the design and manufacture of printed circuit boards. Running on the Apple Macintosh or a Windows pc, the entire line is quick, powerful, and easy to learn. The software, with high resolution graphics and a friendly user interface, provide a high quality engineering workstation that is both very affordable and a pleasure to use.

    Product Name: BluePrint-PCB
    Company: DownStream Technologies

    BluePrint-PCB "knows" it is creating a PCB document and imports the entire PCB CAD database once to automatically create and link unlimited PCB views and details, while at the same time maintaining the design intelligence and overcoming the constraints imposed by both PCB and mechanical CAD alternatives. The result is an electronic document which better articulates the instructions for successful PCB manufacturing.

    Product Name: CAM350
    Company: DownStream Technologies

    CAM350 offers a complete suite of tools, from design through fabrication, streamlining the transition of engineering data into successful, physical PCBs.

    Product Name: PCB Layout
    Company: EDADOC USA

    • PCB design total solution: including PCB footprint, Netlist import, Placement, Routing,  Gerber out and DFM checking, etc
    • Part of PCB design: ranging from PCB Footprint, Database creating, Rules import, Placement, Routing, QA & Review to DFM checking and Gerber out
    • On-site service: work together with your engineers in your office
    • Consulting and training: provide consulting and training services of PCB design
     

    Product Name: Viso
    Company: EDXACT SA

    • Enables quick analysis of interconnect parasitics in order to pinpoint problems.
    • Allows timing estimation and accurate comparison of different extracted netlists.
    • Integrated into all major design flows.
       

    Product Name: E-studio Pro
    Company: Elgris Technologies, Inc

    E-studio is our most versatile product. It can be used for viewing schematics, generating schematics from netlists, translating schematics and netlists from/to leading vendor databases or from/to standard formats like EDIF and XML. It can also be used for collaboration as it contains red-lining functionality. If you deal with OrCAD Capture, ConceptHDL, Viewdraw/DxDesigner, EDIF200, EDIF300, EDIF400, XML, Spice, Verilog, DesignArchitect , PADS Powerlogic, Altium Designer  or PCAD databases, you need to own this tool.

    Product Name: EDIF Translators
    Company: Elgris Technologies, Inc

    Elgris develops and supports EDIF (Electronic Design Interchange Format) translators that are used by designers of application-specific integrated circuits (ASIC), printed circuit boards (PCB), and multi-chip modules (MCM). These are EDIF standard translators that you can find on EDA platforms such as Cadence Design Systems, Mentor Graphics, etc. EDIF translators are used for migration of designs from one EDA platform to another, integration from various EDA platforms, and archiving into a neutral format, EDIF.

    Product Name: XML EDA Translators
    Company: Elgris Technologies, Inc

    Elgris Technologies, Inc. (Elgris) has  a suite of XML Interface Tools for EDA. XML (eXtensible Markup Language) defines a set of rules for writing markup languages. XML was used to define a markup language called EdaXML. The XML rules for EdaXML are defined in an XML Document Type Definition (DTD) called EdaXML.dtd.

    Product Name: Cadence OrCAD Capture
    Company: EMA Design Automation, Inc.

    Cadence® OrCAD® Capture offers a comprehensive solution for entering, modifying, and verifying complex system designs quickly and cost-effectively. Whether used to design a new analog circuit, revise a schematic diagram for an existing PCB, or design a digital block diagram with an HDL module, OrCAD Capture allows designers to enter, modify, and verify the PCB design.

    Product Name: Cadence OrCAD Capture CIS
    Company: EMA Design Automation, Inc.

    Cadence® OrCAD® Capture offers a comprehensive solution for entering, modifying, and verifying complex system designs quickly and cost-effectively. Whether used to design a new analog circuit, revise a schematic diagram for an existing PCB, or design a digital block diagram with an HDL module, OrCAD Capture allows designers to enter, modify, and verify the PCB design. OrCAD Capture CIS integrates the schematic design application with the features of a component information system (CIS).

    Product Name: Cadence OrCAD PCB Editor
    Company: EMA Design Automation, Inc.

    PCB Editor contains full-featured PCB editor based on Allegro technology; its extensive feature set addresses a wide range of today’s design challenges and manufacturability concerns.

    Product Name: PSpice A/D Circuit Simulator
    Company: EMA Design Automation, Inc.

    Cadence® PSpice® A/D is a full-featured analog simulator with support for digital elements to help solve virtually any design challenge—from high-frequency systems to low-power IC designs. The powerful simulation engine integrates easily with Cadence PCB schematic entry solutions, improving time to market and keeping operating costs in check. An interactive, easy-to-use graphical user interface provides complete control over the design process. Availability of resources such as models from many vendors, built-in mathematical functions, and behavioral modeling techniques make for an efficient design process.

    Product Name: PCB Material Handling Conveyors
    Company: ETS Energy Technology Systems, Inc.

    Modular Material Handling Conveyors from ETS are customized to your exacting requirements and are easy to integrate into your printed circuit assembly systems. Solvent flash off conveyors, inspection stations, buffers, accumulators, loaders and unloaders, shuttles, inverters, gates, turn units, and workstations are available as standard and customized products and can be equipped to fit special requirements.

    Product Name: FS4400 PCI Express Analysis Probe
    Company: FuturePlus® Systems

    The FS4400 PCI Express Serial Analysis Probe is a low-cost bus analysis probe capable of non-intrusively probing a PCI-Express bus at a serial data rate of 2.5 Gbps. The FS4400 connects to the system under test with one of several adapter cables. Protocol decode software is included to decode and display incoming data using an Agilent logic analyzer. The probe and decode software are designed to handle a single uni-directional link, a pair of uni-directional links, or a bi-directional link (both links may have a different Reference Clock).

    Product Name: FS4410 Serial Rapid IO Protocol Analysis Probe
    Company: FuturePlus® Systems

    The FS4410 Serial Rapid IO (SRIO) Protocol Analysis Probe is a low-cost logic analyzer analysis probe capable of non-intrusively probing a SRIO bus at a serial data rate of up to 3.125 Gbps. The FS4410 connects to the system under test with various probe adapters and monitors bus traffic in real time. Protocol decode software is included to decode and display incoming data using an Agilent logic analyzer.

    Product Name: PROC Boards
    Company: GiDEL

    GiDEL PROC boards feature high performance and flexible design that makes the boards easy to configure for a wide variety of applications.The large variety of PROC boards enables the customer to choose the board that suites best his/her cost/performance needs.

    Product Name: Test Fixtures and Boards
    Company: GigaTest Labs

    For popular high speed components like semiconductor packages, and test contactors, we have developed standard fixturing which allows the use of high bandwidth microprobes to measure virtually any I/O pin, according to GigaTest's methodology and requirements.

    Product Name: JTAG/Boundary Scan
    Company: GÖPEL electronic GmbH

    The change to multidimensional access started in the late 1990s. The upcoming era of Embedded System Access (ESA) will increasingly replace “old” test methods such as In-Circuit Test (ICT) and Flying Probe (FPT).

    Product Name: ECX800
    Company: IBASE Technology Inc

  • Fanless Mobile Intel® 945GM Chipset based ECX form-factor platform
  • Supports Intel® Core™ Duo /Solo processors
  • Integrated VGA supporting CRT and TV out interface
  • One DDR2 SODIMM sockets for 2GB memory
  • Gigabit LAN, SATA, USB 2.0, Digital I/O, CF socket
  • Product Name: ET800
    Company: IBASE Technology Inc

    • Intel® LV Pentium® M or Intel® Celeron® M ULV processor on board, up to 1.6GHz (Micro-FCBGA)
    • 400MHz CPU Operating Frequency
    • Intel® 82855GME Chipset with integrated VGA supporting VGA CRT and LVDS interface
    • One SODIMM socket supports up to 1GB
    • Integrated 10/100 Ethernet
    • Supports 4 USB 2.0 ports
    • PCI to ISA Bridge, ISA High Drive 

    Product Name: IB799
    Company: IBASE Technology Inc

    • Supports VIA CN700, 400/533/800MHz FSB
    • Supports VIA Eden-V4, 400MHz~1.2GHz
    • Supports VGA, LVDS, MPEG-2 playback
    • Built-in 10/100 LAN, optional Gigabit LAN
    • Two DDR-II sockets support up to 2GB
    • Six USB, Two Serial ATA, four COM ports
    • One PCI, PCI-104, CompactFlash socket 
    • Digital I/O, Watchdog timer

    Product Name: PowerVR Ray Tracing
    Company: Imagination Technologies Ltd.

    PowerVR Ray Tracing is a revolutionary technology that brings lightning fast ray tracing to the world's leading mobile GPU. This game-changing feature enables astonishing realism as well as allowing developers and content creators to simplify their workflow.

    Product Name: System Design Board SDB-750/1000
    Company: Inicore, Inc

    INICORE’s System Development Board offers you an easy to use platform containing all elements for your new product design. Because of its great flexibility it can be used for ARM based or FPGA only designs and as verification and development platform for IP’s.

    Product Name: PANTHEON
    Company: Intercept Technology Inc.

    WELCOME TO PANTHEON, the next level for PCB/Hybrid/RF design engineering. As a complete design system, PANTHEON offers in one application the same advanced features that others offer in multiple applications; geometry generation, component placement and routing, area fill, testpoints, split power planes, RF and hybrid design, and artwork creation/verification. Not only does PANTHEON offer artwork creation and verification, it also offers the industry's only true double verification system in which the artwork is checked based on manufacturing rules, ensuring that the manufactured design will have zero defects. With the integration of multiple applications' abilities into one highly functional application, PANTHEON increases productivity to previously unreachable goals, while keeping design time and cost to a minimum.

    Product Name: IC-PMC-cPCIa
    Company: INTERFACE CONCEPT

    IC-PMC-cPCIa is a 3U compact PCI carrier for PCI Mezzanine Cards. One PMC card, compliant with IEEE1386, can be plugged onto this carrier. It integrates a 32-bit PCI bus capable of 33 or 66MHz frequencies.

    Product Name: IC-PMC-VMEa
    Company: INTERFACE CONCEPT

    The VMEbus interface of the IC-PMC-VMEa is based on a combination of the Tundra Tsi148 VME bridge and the latest generation of Texas Instrument VMEbus transceivers. This design allows the switching speed required by the 2eSST protocol on all the backplane slots.

    Product Name: XJAnalyser
    Company: Logic Technology BV

    Utilising XJTAG allows the circuit development and prototyping process to be shortened significantly by facilitating early test development, early design validation, fast development of functional tests and test re-use across circuits that use the same devices. XJTAG is based in Cambridge, UK, and is part of the Cambridge Technology Group.

    Product Name: Circuit Board Plotters
    Company: LPKF Laser & Electronics, North America

    LPKF's ProtoMat family of systems provides ideal prototyping equipment for virtually any engineering environment. Every LPKF ProtoMat® plotter is built to be the best of its class, with thousands of installed systems to prove it.

    Product Name: Printed Circuit Board Assembly
    Company: MakeMyCircuitBoard

    Today, electronic gadgets like computers, cell phones and multi-media players are ubiquitous. All of these electronic gadgets use one or more printed circuit boards inside them. Each printed circuit board contains multiple discrete devices properly placed on it and connected together to implement the correct functionality. The discrete components on these printed circuit boards can range from a few hundred to tens of thousands, all assembled on a single printed circuit board. The process of assembling a printed circuit board can be broadly classified into two types: Plated through Hole (PTH) Technology and Surface Mount Technology (SMT).

    Product Name: A201S - 6U VMEbus M-Module™ Carrier Board
    Company: MEN Mikro Elektronik GmbH

    The A201S is an M-Module™ carrier board for universal I/O on the VMEbus, allowing high flexibility in applications such as process and motion control, measuring and instrumentation, communication or special-purpose tasks...

    Product Name: A203N - 6U VME64 M-Module™ Carrier Board
    Company: MEN Mikro Elektronik GmbH

    The A203N is an M-Module™ carrier board for universal I/O on the VMEbus, allowing high flexibility in applications such as process and motion control, measurement and instrumentation, communication or special-purpose tasks...

    Product Name: AD67 - 6U I/O Extension for A12, A15, D3, SC13
    Company: MEN Mikro Elektronik GmbH

    The AD67 is an I/O extension card for a variety of MEN CPU cards in 6U format such as the VME SBC families A12 and A15, the CPCI SBC family D3 or the stand-alone SBC family SC13...

    Product Name: F12N - 3U CompactPCI® MPC5200B SBC
    Company: MEN Mikro Elektronik GmbH

    Equipped with the MPC5200 automotive PowerPC®, the F12 single-board computer is a versatile 3U Eurocard CompactPCI® board that operates at up to 400 MHz and 700 MIPS...

    Product Name: I/O Designer
    Company: Mentor Graphics

    FPGAs are widely used in many industries and applications. But, every FPGAmust ultimately reside on a PCB. Historically a manual process or numerous scripts were utilized to incorporate the FPGA into the PCB design. This process was satisfactory for smaller and less sophisticated devices, but, today’s FPGAs are powerful devices with high pin counts, numerous I/O standards, and high speed capabilities.

    Product Name: AWR Connected™ for Mentor Graphics
    Company: National Instruments (Formerly AWR Corporation)

    As clock rates, operating frequencies, and component density increase, it's essential you have the ability to concurrently design RF/microwave circuits and realize them on a printed circuit board (PCB) that is design-rule-checked and manufacturable. AWR Connected for Mentor Graphics Expedition is just such a solution.

    Product Name: OptEM Interconnect Designer
    Company: OptEM Engineering, Inc.

    OptEM ID is a parametric design and analysis tool that allows you to investigate how the electrical characteristics of an interconnect structure change as input parameters change. Often, in the final manufactured product, many design parameters differ from their original specifications.

    Product Name: Capabilities
    Company: PCB Experts, LLC

    • Controlled impedance, Differential pair, Matched length busses.
    • High speed Signal Integrity modeling.
    • DDR, USB, Fibre Channel, SATA, FireWire, etc.
    • Video, Audio, Power, Analog and Digital.
    • Microstrip and stripline routing.
    • RF, radio and embedded trace antennas.
    • FPC (Flex Printed Circuit) Design, fabrication and assembly.
    • 26+ PCB layer count

    Product Name: PCB Design Services
    Company: PCB Experts, LLC

    PCB design from your schematic. PCB design and layout is our specialty. We will usually take your schematic, although not necessary, and create a professionally designed PCB just for you. Whatever your project may be, we'll take your ideas and create a professionally designed PCB that fits your schematic.

    Product Name: PCB Fabrication Services
    Company: PCB Experts, LLC

    PCB Experts offers inexpensive PCBs for quantities as little as 1 piece to as high as 5,000 pieces. In addition, our PCB designers look over every design for potential mistakes. This service can't be found at most PCB fabrication houses.

    Product Name: Gold Finger PCB
    Company: PCBSourcing Co. Ltd.

    Gold Fingeris agold-platedterminal of a card-edge connector, usually, fingers are done by flash gold (hard gold) and the gold thickness is requested to be from 3u`` to 50u`` because fingers are mainly used for pluging for many times.

    Product Name: LED Lighting PCB
    Company: PCBSourcing Co. Ltd.

    LED stands for Light Emitting Diode and has been around for many years but only recently generally available as a genuine alternative to traditional light sources. Nowthere is a real boom for LED lighting. We can provide all kinds of PCB for LED.

    Product Name: Mentor Valor NPI DFM Validation System
    Company: Peace Giant Corporation

    Valor NPI products combine capabilities of design for manufacture (DFM) and new product introduction (NPI) to ensure smooth transition from PCB design to fabrication, assembly and test from any PCB design environment.

    Product Name: EDAConnect
    Company: Perception Software

    There’s no question that sharing information between ECAD and Agile PLM can be beneficial for both design engineers and product lifecycle managers. The question is how to enable effective collaboration between them without adding unnecessarily to engineering overhead.

    Product Name: Laser Photoplotting
    Company: Photozone Electronics

    Photozone Electronics provides a premier Laser Photoplotting service for the PCB industry. Supporting a number of CAD & CAM formats. Photozone Electronics offers a reliable, quick turn (24 hour) plotting service, producing high quality photo tools on silver halide film at very competitive prices.

    Product Name: Boards
    Company: PLDA

    PLDA offers a range of FPGA development kits including boards targeted at broad FPGA and PCIe prototyping, as well as highly integrated FPGA cards intended to be deployed in production environments for network data processing applications , and small form factor System-on-Module based on Altera and Xilinx FPGA with built-in ARM processors, ideally suited for embedded high-performance applications.

    Product Name: Flying probe Impedance Test System RITS520a
    Company: Polar Instruments Inc.

    If you need to test impedance on PCBs the new RITS520a allows you to make repeatable on-board impedance measurements with throughput 16 times faster than a manual system 

    Product Name: Flying probe repair test system GRS500
    Company: Polar Instruments Inc.

    Cost effective fixtureless PCB test and troubleshooting systems.  You can debug faulty circuit boards after functional test or fault find on short series and prototype production.The GRS500 is now available on a cost effective rental or rent/purchase basis  

    Product Name: Si9000e PCB transmission lossy line field solver
    Company: Polar Instruments Inc.

    The new Si9000 Transmission Line Field Solver incorporates fast and accurate lossless and frequency-dependent PCB transmission line modelling. The Si9000 extracts RLGC matrices and 2-Port (single-ended) or 4-Port (differential) S-Parameters for a wide range of PCB transmission lines, graphing impedance magnitude, loss (conductor loss, dielectric loss and insertion loss), inductance, capacitance, resistance, conductance and skin depth.

    Product Name: TONEOHM SHORTS LOCATORS
    Company: Polar Instruments Inc.

    Invented by Polar, the TONEOHM has become synonymous with short circuit location on both bare and loaded PCBs. The instruments are used to locate the physical position of shorts to within a small area by PCB assemblers (particularly in conjunction with ATE) as well as bare board manufacturers.

    Product Name: NetworkComputer™
    Company: Runtime Design Automation

    NetworkComputer™ is an enterprise-grade high-performance job scheduler, otherwise known as a batch processing system or a distributed resource management system (DRMS). NetworkComputer™ provides a cost-effective solution for distributing an IT workload over any compute farm (cluster) topology.

    Product Name: Processor Modules
    Company: senTec Elektronik GmbH

    The ColdFire processor family is the successor of the legendary Motorola 68000 series and was optimized especially for Embedded Applications. It delivers high arithmetic performance at low current consumption. Today, several ColdFire processor derivatives are available.

    Product Name: SAW Sensor Technology
    Company: senTec Elektronik GmbH

    With the sensor system developed by senTec Electronics it is possible to measure the temperature wireless at standing and moved parts. The sensor works as a passive transponder without any own energy source, powered only by the radio frequency. This procedure works in a temperature range from 0°C to 300°C.

    Product Name: Wireless Sensor Networks
    Company: senTec Elektronik GmbH

    The use of wireless sensors offers benefits in many areas of application. senTec Elektronik is working on solutions for wireless sensor networks and offers IEEE 802.15.4 compatible radio modules.

    Product Name: Lead Free PCBs / ROHS & WEEE Compliant
    Company: Sierra Protoexpress

    The main thrust of the RoHS requirement is that 6 hazardous substances may not exceed strict limits set by these directives. These substances are lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl and polybrominated biphenyl ethers. These substances are limited to 1000 parts per million (0.1%) with the exception of cadmium which is restricted to 100 parts per million (0.01%). For the printed circuit board industry the restrictions on lead and polybrominates (used as flame retardants in plastics, i.e. epoxy resins) are far reaching.

    Product Name: Web PCBs
    Company: Sierra Protoexpress

    Our new promotion, Web PCBs, is the fastest and most convenient way for you to get PCBs online. On your Web PCB orders, our CAM Engineers personally verify your design for manufacturability (DFM), so you get Sierra's famous quality and quick turn times--all at low prices. And we provide NRE/Tooling for free. Keep that in mind as you compare our prices to anyone.

    Product Name: Broadband SPICE
    Company: SIGRITY, Inc.

    Highly automated, Broadband SPICE synthesizes SPICE circuits from multi-port network parameters with unmatched accuracy over broadband frequencies.

    Product Name: PowerDC
    Company: SIGRITY, Inc.

    PowerDC, customized for system-level IR drop analysis for packages and boards, helps designers budget end-to-end voltage margins for every device on the package and board to ensure designs are operational.

    Product Name: PowerSI
    Company: SIGRITY, Inc.

    Optimized for frequency domain analysis, PowerSI compliments SPEED2000 and its time domain analysis capabilities. PowerSI is unmatched at extracting frequency dependent multi-port network parameters for power and signal distribution systems.

    Product Name: SPEED2000
    Company: SIGRITY, Inc.

    SPEED2000 is a versatile electrical simulation software tool for the analysis and design of high-speed electronic systems for companies in the computer, semiconductor, graphics, networking, communications, and consumer electronics markets. It provides fast and accurate electrical analysis of leading-edge integrated circuit (IC) packages and printed circuit boards (PCBs). SPEED2000 combines circuit and transmission line simulations with a fast, special-purpose electromagnetic (EM) field solver that computes dynamic electromagnetic interactions within IC package and board structures.

    Product Name: Simbeor™
    Company: Simberian Inc.

    Simbeor™ is extendable graphical environment to describe and visualize a multilayered circuit geometry, set up and run electromagnetic simulation, and visualize and post-process the simulation results. Simbeor™ contains 3D full-wave solver for analysis of multiconductor interconnects in multilayered media with broadband causal dielectric and metal interior and surface roughness loss and dispersion models.

    Product Name: Benchmark
    Company: Speedline Technologies, Inc.

    Benchmark software from Speedline Technologies is a proprietary framework designed to support common machine control capabilities used in printed circuit board (PCB) manufacturing. These capabilities include motion and I/O control, database support, vision capabilities, diagnostics, SPC capabilities and a standardized Windows®-based user interface.

    Product Name: CircuitCAM
    Company: Speedline Technologies, Inc.

    CircuitCam software's graphic modeling system makes it possible for electronics manufacturers to design complete factory and production layouts. Users can intuitively generate programs for more than 100 different machine types used in printed circuit board (PCB) and surface mount technology (SMT) manufacturing. The off-line software package quickly converts over 30 forms of CAD, Gerber, and bill of materials data into equipment recipes without interrupting SMT production lines.

    Product Name: Board Processes and Technologies
    Company: Standard Printed Circuit Board Ltd. SPCB

    These are the simplest printed circuit boards. Single-sided printed circuits do not require plating through holes and have a circuit pattern only on one side.
    Double sided printed circuits are one step up from the single-sided PCBs in their complexity. When fabricating double-sided boards, through-holes are usually required between the top and bottom pads; these pads are connected using a special copper plating process commonly referred to as Plated Through Hole (PTH). This process and the resultant products allow interconnections between layers through all holes.

    Product Name: PCB Design Services
    Company: SunMan Engineering, Inc.

    SunMan Engineering provides a wide range of PCB Design Services, including schematic capture, PCB layout engineering. We use a proprietary quality assurance system, which allows us to guarantee that the final layout will exactly reproduce the schematic

    Product Name: PCB Layout & Schematic Capture
    Company: SunMan Engineering, Inc.

    Printed Circuit Board layout engineering and the supporting engineering of schematic capture are the hub areas for SunMan Engineering's service offerings. The applications we have serviced cover a wide range of functionality including:
    • Digital signal processing
    • Analog and mixed signal applications
    • High frequency products (>10GHz)
    • RF at 2.4GHz
    • Impedance control PCB's > FPGA/CPLD design and development > AC/DC and DC/DC converters

    Product Name: Important Pre-set PCB Drill Information for PCBexpress Quickturn Service
    Company: Sunstone Circuits

    The drill file is also commonly referred to as anNC (numerically controlled) drill file in the industry. Excellon is the preferred term used with our Sunstone services. The Excellon drill file defines hole locations and tool numbers (X & Y coordinates).

    Product Name: PCBexpress Quickturn PCB Services
    Company: Sunstone Circuits

    Sunstone's PCBexpress quickturn PCB service is the perfect way to save time and money, especially in the prototyping stage. Your quickturn PCB prototype boards can be completed in small runs and delivered in a hurry. We deliver 2- to 6-layer quickturn PCBs quickly, worldwide, in tin, lead, or silver (RoHS-compliant) finishes. This service provides a world-class quickturn PCB prototype board shipped in as little as 24 hours!

    Product Name: FPGA development Board
    Company: SystemCrafter Ltd

    ZestSC1 can draw power from the USB port giving it great portability. For instance it can be used with a laptop. For higher power a wall adapter or a hard-drive power connector can be used. It's very quick and easy to get going: you just have to plug a USB cable into ZestSC1 and your PC. It comes with support software for FPGA configuration and communication, and logic cores for the FPGA interfaces.

    Product Name: IsoPro
    Company: T-Tech, Inc.

    T-Tech's IsoPro software features a Windows graphical interface to make users more productive immediately, making it easy to load, view, and edit your standard CAD output. You can create single or multiple isolation paths and afterwards specify partial or complete copper removal. With the ability to edit layouts, such as adding pads and traces, it saves time and saves design errors.

    Product Name: PCB Analysis
    Company: Technical Systems Integrators, Inc.

    With Sherlock by DfR Solutions, you can. Sherlock is a new Automated Design Analysis Tool that allows you to predict product failure earlier in the design process, allowing you to design reliability right into the product. And with results in hours instead of weeks, you'll be able to deliver these products faster and more efficiently, contributing to your customer's success. Didn't see that coming, did you?

    Product Name: DiaTem Studio
    Company: TEMENTO Systems

    DiaTem StudioTM is a low cost manufacturing test platform dedicated to Printed Circuit Board PCB) test in a production environment. DiaTem StudioTM is composed of 4 stations, the engineering station, the industrialization station, the production station and the repair and maintenance station.

    Product Name: Membrane Keypads
    Company: The PCB Company Pty Ltd

    Membrane Keypads utilise Polycarbonate or Polyester films with a print process over the base material to produce a graphic overlay as per our "Basic Label" products. The film is overlayed over a series of additional film layers and metallic membranes to produce a integrated switch and label assembly. Multicolour and now full colour print processing is available, working from customer supplied artwork or utilising our in house design service.

    Product Name: RIGID-FLEXIBLE Printed Circuit Boards
    Company: The PCB Company Pty Ltd

    Rigid-Flexible Printed Circuits Boards are a hybrid PCB manufactured by combining rigid PCB technology with Flexible PCB technology. The integration of these two technologies into one product enables a PCB assembly to be manufactured with a high level of integration, reducing assembly cost, improving reliability and offering a solution that can resolve technical and mechanical problems not addressed by other technologies on their own.

    Product Name: Professional SILICON
    Company: TOOL Corp.

    CAD tool to edit design data for LSI, LCD and shadow masks. It allows input/output to GDSII file and conversion from/to MAN.

    Product Name: CADSTAR: Desktop PCB Design
    Company: Tropical PCB Design Services Inc.

    CADSTAR is a design solution that spans schematic capture, placement, routing, library creation and management, signal integrity, EMC analysis, and production of manufacturing data. CADSTAR also features internet-accessible libraries of over 250,000 components, a 3D design tool, automatic and high-speed routing, variant management, and signal integrity management and verification. It provides users with a competitively priced, scalable solution for designing simple or complex multilayer PCBs.

    Product Name: CR-5000: Enterprise Wide PCB Design
    Company: Tropical PCB Design Services Inc.

    CR-5000 is Zuken's printed circuit board (PCB) and advanced packaging layout suite of customizable tools aimed at the Enterprise market. Incorporating the latest technology requirements (embedded components, RF Design & Design re-use) within a constrained design process methodology, it offers maximum benefit for customers whose key requirements include high-speed digital design, miniaturization and time to mass production.

    Product Name: CAD CONNECT
    Company: UniSOFT

    CAD CONNECT is featured in all CircuitMaster series modules. CAD CONNECT imports CAD, Bill of Materials (BOM), CNC and mechanical drawings formats. Other features include editing of component properties, net renumbering, importing of test probe number, etc. Easy to use if you need just a single import or the multiple formats contract manufacturers encounter.

    Product Name: ProntoGERBER CONNECTION
    Company: UniSOFT

    In minutes Unisoft ProntoGERBER CONNECTION software translates Gerber and Bill of Material (BOM) files into real reference designators, theta rotation, part numbers, X/Y component pin geometries, values, tolerances, etc. This data is then used by Process Engineers to program SMT and Thru-hole Automatic Assembly Equipment, create manual assembly sheets, process documentation and by Test Engineers to program Automatic Test Equipment and aid repair and rework.

    Product Name: Trilogy
    Company: Valor Computerized Systems, Ltd.(acquired by Mentor Graphics)

    Pre-production engineering solution for NPI, design validation, DFM, assembly preparation and optimization, test and factory floor documentation.
    Valor's engineering solution (a.k.a Trilogy) eliminates the data problems experienced by most electronics manufacturers by integrating all incoming logistical and engineering data into a single database for elegant, efficient pre-production and communication

    Product Name: CANalyzer 7.1
    Company: Vector Cantech, Inc.

    CANalyzer is the  universal  analysis tool for networks and distrib-uted systems. This product makes it easy to observe, analyse, and supplement data traffic in CAN, LIN, MOST, or FlexRay systems. With powerful functions and user-programmability, all needs  are covered  from  simple network analyses to advanced troubleshoo-ting of complex problems.

    Product Name: CANoe 7.1
    Company: Vector Cantech, Inc.

    CANoe is an all-round tool for the development, testing and analysis of networks and ECUs. It supports the user during the entire development process, from planning to startup. CANoe’s versatile functions and configuration options are used by network designers, development engineers and test engineers at OEMs and suppliers.

    Product Name: Board Support Packages
    Company: Wind River

    Together with our partners, Wind River offers the most extensive range of board support packages in the device software industry to aid you with board bring-up and design. Our close relationships with silicon vendors and hardware manufacturers enable us to offer ready-to-use products supporting the latest processors, so you can choose the best development platforms for your specific architecture.

    Product Name: OK6410 with 4.3" LCD
    Company: Witech Co., Ltd

    This is a promotion package deal containing one TE6410-CORE, one OK6410 carrier board and One 4.3" LCD. The OK6410 is another ARM11 rapid development kit for the TE6410-CORE System on Module, it includes one TE6410-CORE SOM module (S3C6410 micro controller, 128MB DDRram, 256MB NAND Flash) and one OK6410 carrier board. Together with the OK6410 we provide demo BSP for Linux, WinCE, Android, uCos/II

    Product Name: TE6410
    Company: Witech Co., Ltd

    Embedded Computer (Single Board Computer) based on the 667MHz Samsung S3C6410 (ARM11) microcontroller.  embodying abundant of built-in resources and powerful video processing capacity

    Product Name: TE6410-CORE
    Company: Witech Co., Ltd

    The TE6410-CORE system on module is based on the Samsung S3C6410 (ARM11) micro-controller. Tested through wide temperature range and electromagnetism environment, the TE6410-CORE is totally up to the product-level standard and applicable for high-end consumer electonics, industrial control equipment, Vehicle navigation device, HMI, multi-media terminal, POS terminal, PDA, etc.

    Product Name: CADSTAR 12.1: Expanding the role of PCB design
    Company: Zuken

    PCB design - The Epicentre of Electronic product development process Collaboration with electronics (chip and system) engineers on one side and mechanical designers on the other, gives PCB designers a usefully broad perspective of the physical design as a whole.

    Product Name: CR-5000: Leading-edge PCB Design Software
    Company: Zuken

    Enterprise-wide modular PCB Design CR-5000 is Zuken’s most advanced modular and robust electronics systems and PCB design software. Created to manage the complete development and manufacturing preparation process on an enterprise-wide scale, Zuken's leading-edge PCB design software was developed specifically for medium to large organizations.

    PCB Design Tools : PCB Manufacturing

    Product Name: Daughter Boards
    Company: AAEON Technology Inc.

    Daughter boards are extensions of motherboards and often have plugs, sockets, pins, connectors, or other attachments for other boards. This lets you access the motherboards directly rather than through a computer bus.

    Product Name: PC Board Design and Fabrication Kit
    Company: Advanced Microcomputer Systems Inc

    Circuit CREATOR Electronics CAE System provides the most complete and high performance solution for electronics design using personal computers. Includes full Schematic Design and Capture, Circuit Simulation, full interactive Symbol Editor, professional Printed Circuit Board Design and Layout, and Automatic Routing.
    The Kit includes:
    • Board Creator Hobbyists Software
    • Press-N-Peel Image Transfer Film
    • Bottle of Etching Chemical
    • Copper Clad Board
    • Software Manual
    • Complete Instructions for making PC Board

    Product Name: Allegro® PCB Design
    Company: Cadence Design Systems, Inc.

    With its comprehensive feature set, Cadence® Allegro® PCB Design offers the leading physical and electrical constraint-driven PCB layout and interconnect routing system. The fully integrated design flow includes design creation, library creation, placement, interactive routing and editing, automatic routing, and interfaces for manufacturing and mechanical CAD.

    Product Name: Condor 203
    Company: Camtek

    The Condor 203 is a versatile, fully automated, optical inspection platform for special applications such as LED, MEMS, optical and medical devices, designed to inspect framed or unframed wafers and various thickness. The Condor 203 delivers the superior detection ability for applications that require a high level of customization in material handling and/or inspection protocols, these include the inspection of: Thin wafer MEMS Bonded WLP Back side Perforated Transparent / translucent substrates Dual handling – frame-mounted / unframed wafers.

    Product Name: Falcon 500
    Company: Camtek

    Camtek’s Falcon 500 series of advanced optical inspection systems provides class-leading defect detection, reliability and process control solutions. Designed to ensure known-good package, Falcon 500 consistently detects visible defects that may impact dice integrity or interconnect reliability. Dedicated algorithms analyze probe marks to determine their size, proximity to pad edge and number of touch-downs.

    Product Name: Falcon 5LED
    Company: Camtek

    The fast growing cost-driven LED (Light Emitting Diode) manufacturing industry requires the most reliable inspection tools. Falcon 5LED joins the industry leading Falcon 500 Series of macro defect wafer inspection systems, handling wafers before or after functional testing. Designed to manage the most critical issues of LED applications inspection, this state-of-the-art system includes advanced software alignment functionality.

    Product Name: CHIP QUIK®
    Company: Chip Quik, Inc.

    THE NEW, PATENTED SMD REMOVAL SYSTEM

    Simply by adding Chip Quik® , normal solder will reflow at a safe low temperature below 150 deg. C (300 deg. F)

    Product Name: Dialogic® DSI SS7MDL4 Network Interface Board
    Company: Dialogic

    The Dialogic® DSI SS7MDL4 Network Interface Board offers multiple levels of signaling link density for SS7 and ATM networks in rack-mount servers with low-profile or full-height PCI Express peripheral slots. Flexible capacity licensing enables message processing from 16 to 124 low-speed links or 2 or 4 high-speed MTP or ATM links.  

    Product Name: PCBA (PCB Assembly)
    Company: Eleclink Inc

    Eleclink custom electronic designs and manufactures high Performance products. Eleclink can provide a remarkable range of customized PCBA solutions to meet your SPEC. design needs.

    Product Name: 10L HDI with two steps
    Company: Hitech Circuits Co., Limited

    We are PCB manufacturer from China and we focus on mulitlayer printed circuit board; High density PCB /HDI, hard gold board; Flexible board / FPCB; Bergquist Aluminum based board,, the ranging from 1L up to 26L. If you have interest in our service and products, please contact us freely.

    Product Name: 14L Multilayer PCB
    Company: Hitech Circuits Co., Limited

    We are PCB manufacturer from China and we focus on mulitlayer printed circuit board; High density PCB /HDI, hard gold board; Flexible board / FPCB; Bergquist Aluminum based board,, the ranging from 1L up to 26L. If you have interest in our service and products, please contact us freely.

    Product Name: 26L Multilayer PCB
    Company: Hitech Circuits Co., Limited

    We are PCB manufacturer from China and we focus on mulitlayer printed circuit board; High density PCB /HDI, hard gold board; Flexible board / FPCB; Bergquist Aluminum based board,, the ranging from 1L up to 26L. If you have interest in our service and products, please contact us freely.

    Product Name: 2L Hard gold PCB
    Company: Hitech Circuits Co., Limited

    We are PCB manufacturer from China and we focus on mulitlayer printed circuit board; High density PCB /HDI, hard gold board; Flexible board / FPCB; Bergquist Aluminum based board,, the ranging from 1L up to 26L. If you have interest in our service and products, please contact us freely. (Note: China PCB manufacturer Hitech Circuits Co.,Limited specially produces on mulitlayer printed circuit board / Multilayer PCB; High density PCB / HDI, hard gold board; Flexible board / FPCB; Bergquist Aluminum based board / MPCB, etc.)

    Product Name: 6L two steps HDI
    Company: Hitech Circuits Co., Limited

    We are PCB manufacturer from China and we focus on mulitlayer printed circuit board; High density PCB /HDI, hard gold board; Flexible board / FPCB; Bergquist Aluminum based board,, the ranging from 1L up to 26L. If you have interest in our service and products, please contact us freely.

    Product Name: ET810
    Company: IBASE Technology Inc

    Supports Intel® Pentium® M / Celeron® M;
    Up to 2.0GHz CPU speed, 400MHz/533MHz FSB
    Supports up to four x1 PCI-E, one x16 PCI-E, four PCI
    DDR2 SO-DIMM x1, Max. 1GB memory
    ICH6M Integrated 10/100 BaseT Ethernet
    Intel® 915GM Integrated VGA; Supports CRT / LVDS
    CPU temperature detection  

    Product Name: IP350
    Company: IBASE Technology Inc

    First Ethernet: supported from the ETX module, Second and Third Ethernet: two 10/100Mbps LAN (Intel® 82551) or two Gigabit LAN (Intel® 82540/ Optional) Dual 10/100Mbps or Gigabit LAN on board
    • Third RJ45 supported by LAN on ETX module
    • Ti2150 PCI to PCI bridge
    • LSI 53C1000 Ultra160 SCSI controller (optional)
    • LVDS Panel and VGA CRT support
    • CF card socket on board
    • Two serial ports, 2 IDE channels
    • PS/2 keyboard one parallel port

    Product Name: MB500
    Company: IBASE Technology Inc

    AMD Geode LX Mini-ITX Motherboard with AMD CS5536 Chipset * Supports AMD Geode LX, 433MHz (LX700) / 500MHz (LX800) * DDR DIMM x 1, Max. 1GB memory * One or two Realtek RTL8100C 10/100 Ethernet * Integrated LX800/LX700 2D VGA controller * Supports VGA CRT and TFT/LVDS LCD display * 4x USB 2.0, 4x COM, CompactFlash socket * Watchdog timer, Digital I/O, 1x PCI, 1x Mini PCI

    Product Name: PALINDROME
    Company: Intercept Technology Inc.

    A one-of-a-kind reverse-engineering product, PALINDROME allows a layout-driven design to back annotate PCB changes and additions to the schematic. PALINDROME works with MOZAIX and PANTHEON to compare schematic and PCB databases, providing valuable part-discrepancy data for RF engineers and PCB designers.

    Product Name: ARM
    Company: OLIMEX Ltd.

    The ARM microcontrollers are High-Performance, 16/32-Bit RISC Core devices. ARM market is one of the most fastest growing microcontroller market. The prices of ARM devices now are similar to 8-bit devices, while they are providing much more power and peripherials than any other 8-bit microcontroller do

    Product Name: PIC
    Company: OLIMEX Ltd.

    The PIC microcontrollers are one of the most popular 8-bit microcontrollers.
    Microship have hundreds of different microcontrollers from the tiny SOT23 package to 84-lead PLCC.
    They can run up to 40 Mhz and execute instructions at four clock cycle

    Product Name: Turn-Key Design Services
    Company: PCB Experts, LLC

    We're capable of handling any part of your design cycle. Schematic capture, PCB design and layout, PCB fabrication and manufacturing assembly. Our team of hardware, software and manufacturing engineers can take your design and with our expertise, deliver a professionally designed product that you envisioned.

    Product Name: Multilayer PCB
    Company: PCBSourcing Co. Ltd.

    The quick development of electronics has high requirement to printed circuit board, which single sided or double sided printed circuit board cannot reach, thus, multilayer pcbs were designed. Printed circuit board with four or more circuit line is called multilayer pcbs or multi-layer printed circuit board.

    Product Name: Network Communication PCB
    Company: PCBSourcing Co. Ltd.

    Concept of networking,communication and telecom become mixed and vague; Network communication allow computers, servers,printers and other devices to send data to each other;  This world become small with development of communication technology and progress of network technology.

    Product Name: PFC High Speed Data Links
    Company: PFC Flexible Circuits Limited

    In conjunction with Samtec, a well-known electronic connector company out of New Albany, Indiana,  PFC has created the PFC Data Link product line. The PFC Data Link is a direct cross to the Samtec Data Link product line. If you have used Samtec Data Links in the past, the PFC Data Link should be a direct electrical replacement. Samtec, had been successfully delivering flexible printed circuit assemblies to their customers since 2002. The concept of making flexible printed circuits by Samtec was to assist in marketing and promoting their high speed connector systems such as the Q Strip™, Q Pairs™, Q Rate™, Q2™,  Edge Rate™ and the Razor Beam™. In 2012, Samtec decided to stop producing flex and asked PFC to provide flex assemblies to Samtec customers.

    Product Name: Rigid-flex
    Company: PFC Flexible Circuits Limited

    The slide show below represents the artwork levels of an 8 layer rigid flex. Four layers are rigid layers and four are flexible. It is highly recommended to do a balanced construction. For example, in the circuit below, you will see 2 rigid copper layers on the top and bottom outside,  and 4 flex copper internal layers. The application is for a defibrillator (medical device). You can see that there are connectors required on two different sides of the circuit. This circuit is carrying signals and power.

    Product Name: Sculptured Flex
    Company: PFC Flexible Circuits Limited

    Often used to create bare/exposed metal contacts beyond the polyimide. The method involves selective three dimensional etching.  Below are some pictures and graphics to give you an idea of what is possible.

    Product Name: MCPCB Fabrication( Metal PCB Fabrication)
    Company: Photozone Electronics

    MCPCB  is demand of market. We provide solution for design as well as proto support for new customers who are not famillier of the design part and specifications of different metalcore material. LED PCB will increase @ rate of 300 % in next year in India only. We are bound to give quality service. India has a huge potential for growth in the future  LED Lighting. The material specification will be given to our customer to educate them so that they will know their product well.

    Product Name: Burn-in Boards
    Company: Sierra Protoexpress

    Burn-In Boards are boards that are used in the process of electrically stressing a device at an elevated temperature, for a sufficient amount of time to cause the failure of marginal devices (Infant Mortality).

    Product Name: Mil-spec PCBs
    Company: Sierra Protoexpress

    Sierra Proto Express is qualified by the USA Department of Defense to MIL- PRF-55110F for GF (FR4) and GI (Polyimide) Printed Circuit Boards.

    Sierra Proto Express has an extended history of manufacturing High Rel printed circuit boards to MIL-PRF-55110 F. We have in-house capability to provide Group A testing that is required for Mil-Spec PCB boards.

    Product Name: PCB Assembly Services
    Company: