Products


Matches: 20
System Level Design (ESL) : Algorithm Design/Exploration

Product Name: EZ-ASM Assembler
Company: Advanced Microcomputer Systems Inc

The EZ-ASM microprocessor/microcontroller assembler from AMS are macro cross assemblers that run on IBM PC and compatible machines and compile programs for specified target processors. The EZ-ASM comes with a built-in editor, reads your assembly language source file and creates a list file and an absolute Hexadecimal machine file in the binary, Intel or Motorola formats.

Product Name: Advantage Wireless Sensor Core
Company: Advantage Electronic Product Development, Inc

The Advantage Wireless Sensor Core TM is a slave companion platform to the Advantage Wireless Controller Core TM, a proven system designed specifically to jumpstart new products in development. Fixed remote sensing applications can provide convenience, efficiency, and safety. Wireless interfaces such as ZigBee
provide rapid, low-cost, and ultra low-power installation.

Product Name: cLGA® Land Grid Array Socket System
Company: Amphenol InterCon Systems, Inc.

The Amphenol InterCon cLGA® land grid array socket system brings conventional-connector-material construction to a high-performance, low-cost socket design. Gold-over-nickel plated beryllium copper spring contacts guarantee long-term connector performance, contact retention, and ruggedness in handling and use.

Product Name: InterCon50™and InterCon1mm™ Two-Piece Connector Systems
Company: Amphenol InterCon Systems, Inc.

The InterCon50™ and InterCon1mm™ two-piece connector systems include board connectors, cable assemblies, and flex assemblies. With the options of cable assembly and flex assembly products, the InterCon50 and InterCon1mm systems are the industry’s most complete two-piece systems. These high-density connectors and assemblies can be found in a wide range of applications including portable electronics, desktop computers, workstations, supercomputers, and medical electronic products.

Product Name: ICEView/ ICEEdit
Company: CAD Science, Inc.

It compresses/converts about 1G GDS data per minute (this is machine and data dependent, 4200RPM notebook hard drive will be much slower than 7200RPM normal desktop hard drive, SATA2 will be faster than IDE, etc). We even saw complete display of 1G GDS file in 48 seconds on some cheap RAID 0 system.

Product Name: CasePlayer2
Company: Gaio Technology, Inc.

'CasePlayer2' can be used to create software program specification documents. It analyzes the embedded C-language source code or assembler source code and generates the program specification documents like flow-chart or module structure chart. And it has the function to refer to the external variables and create the reference list which shows the source code lines referring or substituting to the external variable. This tool can be used to analyze the source code resources, which is developed in past times, when porting the source code resources to the new system.

Product Name: SystemVue ESL Design Software
Company: Keysight Technologies

SystemVue is a focused electronic design automation (EDA) environment for electronic system-level (ESL) design. It enables system architects and algorithm developers to innovate the physical layer (PHY) of wireless and aerospace/defense communications systems and provides unique value to RF, DSP, and FPGA/ASIC implementers. As a dedicated platform for ESL design and signal processing realization, SystemVue replaces general-purpose digital, analog, and math environments. SystemVue "speaks RF", cuts PHY development and verification time in half, and connects to your mainstream EDA flow. Key Benefits of SystemVue
  • Best-in-class RF fidelity among today’s baseband/PHY environments – allows baseband designers to virtualize the RF and eliminate excess margin
  • Superior integration with Test accelerates real-world maturity and streamlines your model-based design flow, from Architectures to Verification
  • Priced for networked workgroups to maximize design re-use and capitalize on Baseband & RF synergies

Product Name: LAYPAR
Company: MATRICuS Inc.

The LAYTOOLS Place and Route package may be used as a stand-alone tool or as an integrated component of the LAYTOOLS suite. Although initially targeted at medium-sized designs (100,000 gates) for mixed-signal application, it does integrate advanced algorithms which allow it to handle large numbers of cells and macros in an efficient manner without manual intervention

Product Name: iBurner I2C EEPROM Programmer Software
Company: Micro Computer Control Corporation

iBurner is our I2C Bus Serial EEPROM Programmer software package that provides a quick and easy way to blank-check, program, read, and verify a wide variety of I2C Bus EEPROMs. iBurner includes a device library with many popular I2C EEPROM devices, and supports adding your own additional devices.

Product Name: VisualSim SmartMachine
Company: Mirabilis Design Inc.

VisualSim SmartMachine is a custom block authoring language, for quick prototyping of software instructions, algorithms and resource processing.  The advantages are ease-of-learning, quick deployment, native code speed simulation performance, small code footprint and language flexibility.

Product Name: TestWave™
Company: National Instruments (Formerly AWR Corporation)

TestWave software integrates test and measurement (T&M) equipment with simulation software for communication systems and radio frequency (RF)/microwave circuits. Together with the Microwave Office® and Visual System Simulator™ (VSS) simulation software, TestWave provides wireless system and RF/microwave circuit designers a complete integration of the design process, combining schematic simulation, test signal generation, and test and measurement verification.

Product Name: PCAN-USB
Company: PEAK-System Technik GmbH

The PCAN-USB adapter enables simple connection to CAN networks. Its compact plastic casing makes it suitable for mobile applications. The opto-decoupled version guarantees galvanic isolation of up to 500 Volts between the PC and the CAN side.

Product Name: Keil ™ C166
Company: pls Programmierbare Logik & Systeme GmbH

The Keil ™ C166 compiler is designed for all derivatives of the XC16x / C16x / ST10 microcontroller families. All special features and peripherals of the controllers are accessible in C. ANSI-C is supported completely. The generated program code shows compact size and excellent performance.

Product Name: Tasking
Company: pls Programmierbare Logik & Systeme GmbH

The TASKING Classic C16x/ST10 toolset is also supported by Universal Debug Engine (UDE). All special features and peripherals of the controllers are accessible in C. ANSI-C is supported completely. The generated program code shows compact size and excellent performance.

Product Name: Filter Design Toolbox 4.6
Company: The MathWorks, Inc.

The Filter Design Toolbox™ product is a collection of tools that provide advanced techniques for designing, simulating, and analyzing digital filters. It extends Signal Processing Toolbox™ software (required, available separately) with filter architectures and design methods for complex real-time DSP applications, including adaptive and multirate filtering.

Product Name: Fixed-Point Toolbox 3.0
Company: The MathWorks, Inc.

Fixed-Point Toolbox™ software provides fixed-point data types and arithmetic in MATLAB®. You can use it to design fixed-point algorithms using MATLAB syntax and execute these algorithms at compiled C-code speed.

Product Name: MATLAB®
Company: The MathWorks, Inc.

MATLAB is a high-level language and interactive environment that enables
you to perform computationally intensive tasks faster than with traditional programming languages such as C, C++, and Fortran

Product Name: Signal Processing Toolbox
Company: The MathWorks, Inc.

The Signal Processing Toolbox is a collection of industry-standard algorithms for analog and digital signal processing. It provides graphical user interfaces for interactive design and analysis and command-line functions for advanced algorithm development

Product Name: Automotive
Company: Tilcon Software (acquired by Wind River)

Tilcon's unique architecture allows OEMs to offer a more competitive business model—OEMs can now rapidly fulfill the unique branding requirements of their customers at dramatically reduced costs.

Product Name: CANape 7.0
Company: Vector Cantech, Inc.

CANape offers you a multifaceted tool that is available for ECU development, calibration, and diagnostics as well as for measurementv data acquisition.
Aldec

Featured Video
Jobs
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
Methodics User Group Meeting at Maxim Integrated 160 Rio Robles San Jose CA - Jun 5 - 6, 2018
2018 FLEX Korea at Room 402/ 403, COEX Seoul Korea (South) - Jun 20 - 21, 2018
DAC 2018 at Moscone Center West San Francisco CA - Jun 24 - 28, 2018
IEEE 5G World FOrum at 5101 Great America Parkway Santa Clara CA - Jul 9 - 11, 2018
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise