Products


Matches: 35
ASIC and IC Design : Documentation Tools

Product Name: CODESYS – IEC 61131-3 Development Tool for Industrial Controllers
Company: 3S - Smart Software Solutions GmbH

CODESYS Development System: Market leading IEC 61131-3 development software in the automation technology sector for PLCs and industrial controllers.

Product Name: StackAnalyzer
Company: AbsInt Angewandte Informatik GmbH

StackAnalyzer automatically determines the worst-case stack usage of the tasks in your application. The analysis results are shown as annotations in the call graph and control flow graph.

Product Name: The SPARC Architecture Manual Version 8
Company: Aeroflex Gaisler AB

SPARC was designed as a target for optimizing compilers and easily pipelined hardware implementations. SPARC implementations provide exceptionally high execution rates and short time-to-market development schedules.

Product Name: AS1312 Boost Converter
Company: austriamicrosystems AG

The AS1312 is an ultra low IQ hysteretic step-up DC-DC converter. The AS1312 achieves an efficiency of up to 94% and is designed to operate from a +0.7V to +5.0V supply, the output voltage is fixed in 50mV steps from +2.5V to 5.0V. In order to save power the AS1312 features a shutdown mode, where it draws less than 100nA. In shutdown mode the battery is not connected to the output. If the input voltage exceeds the output voltage the device is in a feedthrough mode and the input is directly connected to the output voltage.

Product Name: Single - Port AHB SRAM - NorFlash Controller
Company: Barco

The BA313A is AHB Slave Controller which provides interface to asynchronous external memory devices. It generates the control and address buses, and handless data bus buffering.

Product Name: Cadence InCyte Chip Estimator
Company: Cadence Design Systems, Inc.

Decisions made during the architectural planning stages of the design cycle largely determine the chip’s resulting size, power consumption, performance, and cost. It’s during these early stages that design teams can realize the biggest benefits by considering and quantifying a variety of architectural options.

Product Name: Schematic Drawings for Non-Electronic Applications
Company: Capilano Computing System

Full hierarchical design is supported with unlimited circuit size and nesting depth. Powerful command set allows top-down or bottom-up design. Multiple hierarchy modes allow for PCB, FPGA and VLSI designs.

Product Name: SOS viaICstudio™
Company: Cliosoft, Inc.

SOS viaICstudio is the only design data management solution available for Mentor Graphics’ ICstudio. ICstudio seamlessly integrates with the SOS Design Collaboration platform to streamline development of complex ICs with large teams across geographically dispersed sites.

Product Name: SOS viaLaker™
Company: Cliosoft, Inc.

SOS viaLaker provides unparalleled design data management and multi-site team collaboration support for Silicon Canvas Laker Custom Design Platform.

Product Name: AHA3602C
Company: Comtech AHA Corp.

The AHA3602C GZIP compression core a high-speed hardware compression accelerator available for ASIC and FPGA implementations. It is fully compliant with the GZIP File Format Specification version 4.3 (RFC-1952), the ZLIB Compressed Data Format Specification version 3.3 (RFC-1950), and the Deflate Compressed Format Specification Version 1.3 (RFC-1951). The core can generate compressed files and individual deflate blocks.

Product Name: AHA3610
Company: Comtech AHA Corp.

The AHA3610 GZIP compression coprocessor is a single chip CMOS VLSI device that implements the open-source GZIP (Deflate) lossless data compression and decompression algorithm. It supports a simultaneous compression/decompression data rate of 2.5 Gbits/sec, while achieving compression performance equivalent to GZIP S/W. The device implements 2 high speed 16-bit parallel DDR interfaces for easy integration in to many microprocessor based systems.

Product Name: AHA370PCIe
Company: Comtech AHA Corp.

The AHA370PCIe is a PCI Express plug-in card that adds GZIP compression acceleration to data networking systems.  This card supports data rates of 10.0 Gigabits per second while achieving high compression ratios equivalent to high effort GZIP software.  Communication and storage networks require high speed compression solutions to reduce latency on communication links, reduce bandwidth on these links, and reduce media requirements when storing files to disk or tape.

Product Name: AHA400PCIe
Company: Comtech AHA Corp.

The AHA400PCIe is a PCI Express plug-in card that recovers lost packets in a network. The board encodes and sends FEC source packets and repair packets through the channel. A matching decoder on the receiving end will recover lost packets. The maximum channel coded block size is 255 packets. Depending on channel conditions, not all of the repair packets need to be transmitted. When the decoder at the receiving end has received 128 packets out of the total 255 source and repair packets for that specific block then the original 128 source packets are restored and output over the PCB’s DMA interface.

Product Name: Cosmic MISRA CHECKER
Company: Cosmic Software

The Cosmic Software MISRA Checker is a standalone software utility that aids in the production of well structured and portable C language code using guidelines* prescribed by the Motor Industry Software Reliability Association (MISRA). The Cosmic MISRA Checker is designed to provide comprehensive static MISRA compliance checking that executes fast enough to be used on every compile.

Product Name: FIBEX-Editior
Company: CRST GmbH

The FIBEX-Editior is a software tool to create and edit FIBEX XML files.

Product Name: Programmable System-on-Chip (PSoC®)
Company: Cypress Semiconductor Corp.

With its unique array of configurable blocks, PSoC® 3 is a true ystem level solution providing microcontroller unit (MCU), memory, analog, and digital peripheral functions in a single chip. The CY8C32 family offers a modern method of signal acquisition, signal processing, and control with high accuracy, high bandwidth, and high flexibility. Analog capability spans the range from thermocouples (near DC voltages) to ultrasonic signals. The CY8C32 family can handle dozens of data acquisition channels and analog inputs on every general-purpose input/output (GPIO) pin.

Product Name: d’Cryptor XE
Company: D Crypt Private Limited

This is D’Crypt’s programmable cryptographic transaction token. It forms part of an intelligent, autonomous reader for contactless smart card payment. It uses the d’Cryptor QE that is certified to FIPS 140-2 Level 3 (Certificate No. 465) and provides maximum flexibility and easy configuration for the user. It can be easily interfaced with communication modules such as RF couplers and modems for contactless smart card payment system like those used in MacDonald’s and 7-11 for EZ-Link top-up. The d’Cryptor XE is currently deployed as the cryptographic processor for a back-end merchant acquirer system.

Product Name: EasyCODE V8 SPX
Company: EASYCODE GmbH

EasyCODE SPX is unique and differs from conventional development environments for the main part due to its editor, which presents source code in a structured form and allows graphic advanced processing. Supported by 25 programming languages, EasyCODE SPX gives you more possibilities for working in a logical and structured manner than any other implementation system. For many programming languages, EasyCODE is also the only editor on the market today that enables structured program development.

Product Name: EasyCODE(JAVA) V6.8
Company: EASYCODE GmbH

EasyCODE(JAVA) is used for simple, computer-aided development, maintenance, enhancement and documentation of JAVA programs using a structure chart method.

Product Name: ComPOD12/StarProg
Company: Elektronikladen

The ComPOD12 BDM-Interface is a universal device for downloading software to HC(S)12 target systems. Together with the StarProg software, EEPROM and Flash memory areas of the 68HC12 and HCS12 microcontrollers can be programmed.

Product Name: ecICP
Company: ExpertControl GmbH

Intelligent Controller Parameterization package
Fully Automated Model Generation and Controller Parameterization/Tuning Package including PID Tuning . ecICP generates controller parameters from measured data for direct use. Different operating areas are taken into account as well as desired closed control loop dynamics requirements and even user-defined transitioning profiles between setpoints. Even strong noisy measurements are handled.

Product Name: ecSTIMlib
Company: ExpertControl GmbH

The ecSTIMlib™ Blockset constitutes a powerful extension for SIMULINK™ and provides comprehensive, interactive, flexible and high quality capabilities for nonlinear actuator excitation and stimulation signal generation. All parameters can be changed at any time, independent whether the application is realtime or non-realtime.

Product Name: MR2A16A : (MRAM)
Company: Freescale Semiconductor Inc.

MRAM is a nonvolatile memory technology that protects data in the event of power loss and does not require periodic refreshing. The MR2A16A is the ideal memory solution for applications that must permanently store and retrieve critical data quickly.

Product Name: DBExplorer
Company: ICScape Inc.

DBExplorer is a physical design database management and data analysis platform. It hyper-links design data that it is only click to do cross probing among data domains of layout, netlist hierarchy, gate level Verilog, SDC, connectivity schematic, and clock schematics.

Product Name: Timing Explorer
Company: ICScape Inc.

TimingExplorer enables designers to diagnose their timing problems and provides fix solutions. The following are the list of major features of TimingExplorer:  Browse and analyze MCMM design timing reports. Narrow down the timing violation cause. TimingExplorer can be used as a pure timing report analyzer, which is also called TimingExplorer Lite.

Product Name: MOZAIX
Company: Intercept Technology Inc.

WELCOME TO MOZAIX, Intercept's high-performance schematic capture application for rapid design entry. In a single hierarchical design environment with intuitive and user-friendly features, MOZAIX allows for the fast creation and management of professional schematics in a single application. The multiple views in Mozaix allow designers to edit parts, symbols and sheets simultaneously, speeding design edit time and global design maintenance.

Product Name: Get control over the database acess API. Code assist, state of the art debuger,
Company: Magillem Design Services

Magillem Generator Studio is a user-friendly and powerful environment to help designers implement, launch and debug their own executables (“generators”) in order to extend the capabilities of their IP based design environment.

Product Name: Perforce Visual Client
Company: Perforce Software Inc.

P4V, the Perforce Visual Client, provides quick and easy access to versioned files through a graphical interface that is consistent across multiple operating systems. P4V is available on Windows, Solaris, FreeBSD, Mac OS X and Linux.

Product Name: Perforce Visual Merge Tool
Company: Perforce Software Inc.

The Perforce Visual Merge Tool, P4Merge, allows users to visualize the differences between file versions. P4Merge uses color coding to simplify the process of resolving conflicts that result from parallel or concurrent development.

Product Name: KGV-227 Pegasus VLSI Microcircuit
Company: SafeNet, Inc.

Satellite telemetry and mission data encryptor and command link decryptor. Cryptographically compatible with the KG-227 and KG-228 flight units, KI-17, Pegasus Ground Unit (MYK-17). Remote electronic keying (up to 64 keys can be indexed). Binary NRZ-L TTL format for PT and CT data, NRZ-M for CT data. Maximum data rate of 100 Mbps. Meets Level S requirements of MIL-M-38510 and MIL-STD-883.

Product Name: CANopen Software & Tools
Company: SYS TEC electronic GmbH

The SYS TEC CANopen Source Code provides all functions and CANopen services required for implementing CANopen devices that comply with CANopen specification CiA 301, CiA 302 and CiA 304.

Product Name: DiaTem Production station
Company: TEMENTO Systems

DiaTem StudioTM is a cost effective manufacturing test platform dedicated to Printed Circuit Board (PCB) test in a production environment.

Product Name: Data Converters
Company: Texas Instruments Inc.

TI delivers a broad portfolio of data converters, touch screen controllers, analog front ends, audio converters and CODECs. Featuring high-performance 12-bit to 18-bit SAR ADCs, 16-bit to 24-bit delta-sigma ADCs, 10-bit to 16-bit pipeline ADCs, and 8-bit to 20-bit DACs, TI has a data converter for all your analog and mixed-signal applications.

Product Name: Universal USB Development Kit for Windows
Company: Thesycon Systemsoftware & Consulting GmbH

The Universal Serial Bus (USB) is supported in all current Windows operating systems. Drivers for USB host controllers and USB hubs are provided as part of the operating system, as are drivers for various standard USB devices.

Product Name: MKQRC
Company: TOOL Corp.

Software to generate a two-dimensional bar code (QR code model 2) symbol from a character string.
Aldec

Featured Video
Jobs
Senior Electrical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
Methodics User Group Meeting at Maxim Integrated 160 Rio Robles San Jose CA - Jun 5 - 6, 2018
2018 FLEX Korea at Room 402/ 403, COEX Seoul Korea (South) - Jun 20 - 21, 2018
DAC 2018 at Moscone Center West San Francisco CA - Jun 24 - 28, 2018
IEEE 5G World FOrum at 5101 Great America Parkway Santa Clara CA - Jul 9 - 11, 2018
TrueCircuits: IoTPLL
DAC2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise